Update memcg_test.txt to describe how to test the move-charge feature.
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memcg has 2 eventcountes which counts "the same" event.  Just usages are
different from each other.  This patch tries to reduce event counter.

Now logic uses "only increment, no reset" counter and masks for each
checks.  Softlimit chesk was done per 1000 evetns.  So, the similar check
can be done by !(new_counter & 0x3ff).  Threshold check was done per 100
events.  So, the similar check can be done by (!new_counter & 0x7f)

ALL event checks are done right after EVENT percpu counter is updated.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Presently, move_task does "batched" precharge.  Because res_counter or
css's refcnt are not-scalable jobs for memcg, try_charge_()..  tend to be
done in batched manner if allowed.

Now, softlimit and threshold check their event counter in try_charge, but
the charge is not a per-page event.  And event counter is not updated at
charge().  Moreover, precharge doesn't pass "page" to try_charge() and
softlimit tree will be never updated until uncharge() causes an event."

So the best place to check the event counter is commit_charge().  This is
per-page event by its nature.  This patch move checks to there.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When per-cpu counter for memcg was implemneted, dynamic percpu allocator
was not very good.  But now, we have good one and useful macros.  This
patch replaces memcg's private percpu counter implementation with generic
dynamic percpu allocator.

The benefits are
	- We can remove private implementation.
	- The counters will be NUMA-aware. (Current one is not...)
	- This patch makes sizeof struct mem_cgroup smaller. Then,
	  struct mem_cgroup may be fit in page size on small config.
        - About basic performance aspects, see below.

 [Before]
 # size mm/memcontrol.o
   text    data     bss     dec     hex filename
  24373    2528    4132   31033    7939 mm/memcontrol.o

 [page-fault-throuput test on 8cpu/SMP in root cgroup]
 # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8

 Performance counter stats for './multi-fault-fork 8' (5 runs):

       45878618  page-faults                ( +-   0.110% )
      602635826  cache-misses               ( +-   0.105% )

   61.005373262  seconds time elapsed   ( +-   0.004% )

 Then cache-miss/page fault = 13.14

 [After]
 #size mm/memcontrol.o
   text    data     bss     dec     hex filename
  23913    2528    4132   30573    776d mm/memcontrol.o
 # /root/bin/perf stat -a -e page-faults,cache-misses --repeat 5 ./multi-fault-fork 8

 Performance counter stats for './multi-fault-fork 8' (5 runs):

       48179400  page-faults                ( +-   0.271% )
      588628407  cache-misses               ( +-   0.136% )

   61.004615021  seconds time elapsed   ( +-   0.004% )

  Then cache-miss/page fault = 12.22

 Text size is reduced.
 This performance improvement is not big and will be invisible in real world
 applications. But this result shows this patch has some good effect even
 on (small) SMP.

Here is a test program I used.

 1. fork() processes on each cpus.
 2. do page fault repeatedly on each process.
 3. after 60secs, kill all childredn and exit.

(3 is necessary for getting stable data, this is improvement from previous one.)

#define _GNU_SOURCE
#include <stdio.h>
#include <sched.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <signal.h>
#include <stdlib.h>

/*
 * For avoiding contention in page table lock, FAULT area is
 * sparse. If FAULT_LENGTH is too large for your cpus, decrease it.
 */
#define FAULT_LENGTH	(2 * 1024 * 1024)
#define PAGE_SIZE	4096
#define MAXNUM		(128)

void alarm_handler(int sig)
{
}

void *worker(int cpu, int ppid)
{
	void *start, *end;
	char *c;
	cpu_set_t set;
	int i;

	CPU_ZERO(&set);
	CPU_SET(cpu, &set);
	sched_setaffinity(0, sizeof(set), &set);

	start = mmap(NULL, FAULT_LENGTH, PROT_READ|PROT_WRITE,
			MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
	if (start == MAP_FAILED) {
		perror("mmap");
		exit(1);
	}
	end = start + FAULT_LENGTH;

	pause();
	//fprintf(stderr, "run%d", cpu);
	while (1) {
		for (c = (char*)start; (void *)c < end; c += PAGE_SIZE)
			*c = 0;
		madvise(start, FAULT_LENGTH, MADV_DONTNEED);
	}
	return NULL;
}

int main(int argc, char *argv[])
{
	int num, i, ret, pid, status;
	int pids[MAXNUM];

	if (argc < 2)
		return 0;

	setpgid(0, 0);
	signal(SIGALRM, alarm_handler);
	num = atoi(argv[1]);
	pid = getpid();

	for (i = 0; i < num; ++i) {
		ret = fork();
		if (!ret) {
			worker(i, pid);
			exit(0);
		}
		pids[i] = ret;
	}
	sleep(1);
	kill(-pid, SIGALRM);
	sleep(60);
	for (i = 0; i < num; i++)
		kill(pids[i], SIGKILL);
	for (i = 0; i < num; i++)
		waitpid(pids[i], &status, 0);
	return 0;
}
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

s/mem_cgroup_print_mem_info/mem_cgroup_print_oom_info/
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It allows to register multiple memory and memsw thresholds and gets
notifications when it crosses.

To register a threshold application need:
- create an eventfd;
- open memory.usage_in_bytes or memory.memsw.usage_in_bytes;
- write string like "<event_fd> <memory.usage_in_bytes> <threshold>" to
  cgroup.event_control.

Application will be notified through eventfd when memory usage crosses
threshold in any direction.

It's applicable for root and non-root cgroup.

It uses stats to track memory usage, simmilar to soft limits. It checks
if we need to send event to userspace on every 100 page in/out. I guess
it's good compromise between performance and accuracy of thresholds.

[akpm@linux-foundation.org: coding-style fixes]
[nishimura@mxp.nes.nec.co.jp: fix documentation merge issue]
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Dan Malek <dan@embeddedalley.com>
Cc: Vladislav Buzov <vbuzov@embeddedalley.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Alexander Shishkin <virtuoso@slind.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of incrementing counter on each page in/out and comparing it with
constant, we set counter to constant, decrement counter on each page
in/out and compare it with zero.  We want to make comparing as fast as
possible.  On many RISC systems (probably not only RISC) comparing with
zero is more effective than comparing with a constant, since not every
constant can be immediate operand for compare instruction.

Also, I've renamed MEM_CGROUP_STAT_EVENTS to MEM_CGROUP_STAT_SOFTLIMIT,
since really it's not a generic counter.
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Dan Malek <dan@embeddedalley.com>
Cc: Vladislav Buzov <vbuzov@embeddedalley.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Alexander Shishkin <virtuoso@slind.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Helper to get memory or mem+swap usage of the cgroup.
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Dan Malek <dan@embeddedalley.com>
Cc: Vladislav Buzov <vbuzov@embeddedalley.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Alexander Shishkin <virtuoso@slind.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patchset introduces eventfd-based API for notifications in cgroups
and implements memory notifications on top of it.

It uses statistics in memory controler to track memory usage.

Output of time(1) on building kernel on tmpfs:

Root cgroup before changes:
	make -j2  506.37 user 60.93s system 193% cpu 4:52.77 total
Non-root cgroup before changes:
	make -j2  507.14 user 62.66s system 193% cpu 4:54.74 total
Root cgroup after changes (0 thresholds):
	make -j2  507.13 user 62.20s system 193% cpu 4:53.55 total
Non-root cgroup after changes (0 thresholds):
	make -j2  507.70 user 64.20s system 193% cpu 4:55.70 total
Root cgroup after changes (1 thresholds, never crossed):
	make -j2  506.97 user 62.20s system 193% cpu 4:53.90 total
Non-root cgroup after changes (1 thresholds, never crossed):
	make -j2  507.55 user 64.08s system 193% cpu 4:55.63 total

This patch:

Introduce the write-only file "cgroup.event_control" in every cgroup.

To register new notification handler you need:
- create an eventfd;
- open a control file to be monitored. Callbacks register_event() and
  unregister_event() must be defined for the control file;
- write "<event_fd> <control_fd> <args>" to cgroup.event_control.
  Interpretation of args is defined by control file implementation;

eventfd will be woken up by control file implementation or when the
cgroup is removed.

To unregister notification handler just close eventfd.

If you need notification functionality for a control file you have to
implement callbacks register_event() and unregister_event() in the
struct cftype.

[kamezawa.hiroyu@jp.fujitsu.com: Kconfig fix]
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Dan Malek <dan@embeddedalley.com>
Cc: Vladislav Buzov <vbuzov@embeddedalley.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Alexander Shishkin <virtuoso@slind.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Try to reduce overheads in moving swap charge by:

- Adds a new function(__mem_cgroup_put), which takes "count" as a arg and
  decrement mem->refcnt by "count".
- Removed res_counter_uncharge, css_put, and mem_cgroup_put from the path
  of moving swap account, and consolidate all of them into mem_cgroup_clear_mc.
  We cannot do that about mc.to->refcnt.

These changes reduces the overhead from 1.35sec to 0.9sec to move charges
of 1G anonymous memory(including 500MB swap) in my test environment.
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is another core part of this move-charge-at-task-migration
feature.  It enables moving charges of anonymous swaps.

To move the charge of swap, we need to exchange swap_cgroup's record.

In current implementation, swap_cgroup's record is protected by:

  - page lock: if the entry is on swap cache.
  - swap_lock: if the entry is not on swap cache.

This works well in usual swap-in/out activity.

But this behavior make the feature of moving swap charge check many
conditions to exchange swap_cgroup's record safely.

So I changed modification of swap_cgroup's recored(swap_cgroup_record())
to use xchg, and define a new function to cmpxchg swap_cgroup's record.

This patch also enables moving charge of non pte_present but not uncharged
swap caches, which can be exist on swap-out path, by getting the target
pages via find_get_page() as do_mincore() does.

[kosaki.motohiro@jp.fujitsu.com: fix ia64 build]
[akpm@linux-foundation.org: fix typos]
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This move-charge-at-task-migration feature has extra charges on
"to"(pre-charges) and "from"(left-over charges) during moving charge.
This means unnecessary oom can happen.

This patch tries to avoid such oom.
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Try to reduce overheads in moving charge by:

- Instead of calling res_counter_uncharge() against the old cgroup in
  __mem_cgroup_move_account() everytime, call res_counter_uncharge() at the end
  of task migration once.
- removed css_get(&to->css) from __mem_cgroup_move_account() because callers
  should have already called css_get(). And removed css_put(&to->css) too,
  which was called by callers of move_account on success of move_account.
- Instead of calling __mem_cgroup_try_charge(), i.e. res_counter_charge(),
  repeatedly, call res_counter_charge(PAGE_SIZE * count) in can_attach() if
  possible.
- Instead of calling css_get()/css_put() repeatedly, make use of coalesce
  __css_get()/__css_put() if possible.

These changes reduces the overhead from 1.7sec to 0.6sec to move charges
of 1G anonymous memory in my test environment.
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is the core part of this move-charge-at-task-migration feature.
 It implements functions to move charges of anonymous pages mapped only by
the target task.

Implementation:
- define struct move_charge_struct and a valuable of it(mc) to remember the
  count of pre-charges and other information.
- At can_attach(), get anon_rss of the target mm, call __mem_cgroup_try_charge()
  repeatedly and count up mc.precharge.
- At attach(), parse the page table, find a target page to be move, and call
  mem_cgroup_move_account() about the page.
- Cancel all precharges if mc.precharge > 0 on failure or at the end of
  task move.

[akpm@linux-foundation.org: a little simplification]
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In current memcg, charges associated with a task aren't moved to the new
cgroup at task migration.  Some users feel this behavior to be strange.
These patches are for this feature, that is, for charging to the new
cgroup and, of course, uncharging from the old cgroup at task migration.

This patch adds "memory.move_charge_at_immigrate" file, which is a flag
file to determine whether charges should be moved to the new cgroup at
task migration or not and what type of charges should be moved.  This
patch also adds read and write handlers of the file.

This patch also adds no-op handlers for this feature.  These handlers will
be implemented in later patches.  And you cannot write any values other
than 0 to move_charge_at_immigrate yet.
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't call get_pid_ns() before we locate/alloc the ns.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Acked-by: NPaul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Modify the Block I/O cgroup subsystem to be able to be built as a module.
As the CFQ disk scheduler optionally depends on blk-cgroup, config options
in block/Kconfig, block/Kconfig.iosched, and block/blk-cgroup.h are
enhanced to support the new module dependency.
Signed-off-by: NBen Blum <bblum@andrew.cmu.edu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a forgotten item into CONTENTS.
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Acked-by: NPaul Menage <menage@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provides support for unloading modular subsystems.

This patch adds a new function cgroup_unload_subsys which is to be used
for removing a loaded subsystem during module deletion.  Reference
counting of the subsystems' modules is moved from once (at load time) to
once per attached hierarchy (in parse_cgroupfs_options and
rebind_subsystems) (i.e., 0 or 1).
Signed-off-by: NBen Blum <bblum@andrew.cmu.edu>
Acked-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add interface between cgroups subsystem management and module loading

This patch implements rudimentary module-loading support for cgroups -
namely, a cgroup_load_subsys (similar to cgroup_init_subsys) for use as a
module initcall, and a struct module pointer in struct cgroup_subsys.

Several functions that might be wanted by modules have had EXPORT_SYMBOL
added to them, but it's unclear exactly which functions want it and which
won't.
Signed-off-by: NBen Blum <bblum@andrew.cmu.edu>
Acked-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch series provides the ability for cgroup subsystems to be
compiled as modules both within and outside the kernel tree.  This is
mainly useful for classifiers and subsystems that hook into components
that are already modules.  cls_cgroup and blkio-cgroup serve as the
example use cases for this feature.

It provides an interface cgroup_load_subsys() and cgroup_unload_subsys()
which modular subsystems can use to register and depart during runtime.
The net_cls classifier subsystem serves as the example for a subsystem
which can be converted into a module using these changes.

Patch #1 sets up the subsys[] array so its contents can be dynamic as
modules appear and (eventually) disappear.  Iterations over the array are
modified to handle when subsystems are absent, and the dynamic section of
the array is protected by cgroup_mutex.

Patch #2 implements an interface for modules to load subsystems, called
cgroup_load_subsys, similar to cgroup_init_subsys, and adds a module
pointer in struct cgroup_subsys.

Patch #3 adds a mechanism for unloading modular subsystems, which includes
a more advanced rework of the rudimentary reference counting introduced in
patch 2.

Patch #4 modifies the net_cls subsystem, which already had some module
declarations, to be configurable as a module, which also serves as a
simple proof-of-concept.

Part of implementing patches 2 and 4 involved updating css pointers in
each css_set when the module appears or leaves.  In doing this, it was
discovered that css_sets always remain linked to the dummy cgroup,
regardless of whether or not any subsystems are actually bound to it
(i.e., not mounted on an actual hierarchy).  The subsystem loading and
unloading code therefore should keep in mind the special cases where the
added subsystem is the only one in the dummy cgroup (and therefore all
css_sets need to be linked back into it) and where the removed subsys was
the only one in the dummy cgroup (and therefore all css_sets should be
unlinked from it) - however, as all css_sets always stay attached to the
dummy cgroup anyway, these cases are ignored.  Any fix that addresses this
issue should also make sure these cases are addressed in the subsystem
loading and unloading code.

This patch:

Make subsys[] able to be dynamically populated to support modular
subsystems

This patch reworks the way the subsys[] array is used so that subsystems
can register themselves after boot time, and enables the internals of
cgroups to be able to handle when subsystems are not present or may
appear/disappear.
Signed-off-by: NBen Blum <bblum@andrew.cmu.edu>
Acked-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current css_get() and css_put() increment/decrement css->refcnt one by
one.

This patch add a new function __css_get(), which takes "count" as a arg
and increment the css->refcnt by "count".  And this patch also add a new
arg("count") to __css_put() and change the function to decrement the
css->refcnt by "count".

These coalesce version of __css_get()/__css_put() will be used to improve
performance of memcg's moving charge feature later, where instead of
calling css_get()/css_put() repeatedly, these new functions will be used.

No change is needed for current users of css_get()/css_put().
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: NPaul Menage <menage@google.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add cancel_attach() operation to struct cgroup_subsys.  cancel_attach()
can be used when can_attach() operation prepares something for the subsys,
but we should rollback what can_attach() operation has prepared if attach
task fails after we've succeeded in can_attach().
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: NLi Zefan <lizf@cn.fujitsu.com>
Reviewed-by: NPaul Menage <menage@google.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Gmail web gui does not work for sending patches now even with firefox
"view source with" extension.  It will use windows style line breaks to
wrap lines automatically when sening email.

Rewrite the gmail web gui part of email client documentation.
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Martin Bligh <mbligh@mbligh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

scripts/kernel-doc mishandles a function that has a multi-line function
short description and no function parameters.  The observed problem was
from drivers/scsi/scsi_netlink.c:

/**
 * scsi_netlink_init - Called by SCSI subsystem to intialize
 * 	the SCSI transport netlink interface
 *
 **/

kernel-doc treated the " * " line as a Description: section with only a
newline character in the Description contents.  This caused
output_highlight() to complain: "output_highlight got called with no
args?", plus produce a perl call stack backtrace.

The fix is just to ignore Description sections if they only contain "\n".
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

x86/Voyager support has been removed a year ago.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Inspired-by: NJonathan Corbet <corbet@lwn.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add header file requirements.  Compliments of Stephen Rothwell.

Stephen calls this Rule #1, so I put it there, but I didn't want to demote
any of the others in the list, so I made one of them number 2b.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Documentation/vm/:
Expose example and tool source files in the Documentation/ directory in
their own files instead of being buried (almost hidden) in readme/txt files.
This should help to prevent bitrot.

This will make them more visible/usable to users who may need
to use them, to developers who may need to test with them, and
to anyone who would fix/update them if they were more visible.

Also, if any of these possibly should not be in the kernel tree at
all, it will be clearer that they are here and we can discuss if
they should be removed.

Also build the recently-added map_hugetlb.c.
Make several functions static to prevent linker warnings.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NEric B Munson <ebmunson@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make dnotify_test.c source file and add it to Makefile so that
bitrot can be prevented.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Documentation/laptops/laptop-mode.txt:
Expose example and tool source files in the Documentation/ directory in
their own files instead of being buried (almost hidden) in readme/txt files.
This should help to prevent bitrot.

This will make them more visible/usable to users who may need
to use them, to developers who may need to test with them, and
to anyone who would fix/update them if they were more visible.

Also, if any of these possibly should not be in the kernel tree at
all, it will be clearer that they are here and we can discuss if
they should be removed.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Documentation/timers/hpet.txt:
Expose example and tool source files in the Documentation/timers/ directory in
their own files instead of being buried (almost hidden) in readme/txt files.
This should help to prevent bitrot.

This will make them more visible/usable to users who may need
to use them, to developers who may need to test with them, and
to anyone who would fix/update them if they were more visible.

Also, if any of these possibly should not be in the kernel tree at
all, it will be clearer that they are here and we can discuss if
they should be removed.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Alex Viskovatoff let me know that after copying data to solaris's ufs from
linux, solaris's fsck sees some errors in cylinder summary information.
This is because of solaris expects find some data on another places, then
curernt implementation save it.  This patch fixes this issue.  It is
tested by me, and also Alex reported that it works for him.
Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru>
Reported-by: NAlex Viskovatoff <viskovatoff@imap.cc>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recent releases of Solaris set the fs_clean state of an unmounted UFS file
system as FSLOG ("logging fs").  However, the Linux kernel currently does
not recognize the value which represents this state.  Thus, attempting to
mount such a file system rw produces the message

kernel: ufs_read_super: can't grok fs_clean 0xfffffffd

and the file system is mounted read-only.  This patch makes the kernel
recognize that value.
Signed-off-by: NAlex Viskovatoff <viskovatoff@imap.cc>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- fix switch statement layout

- fix whitespace stuff

- fix comment layout

- remove unneeded inlining

- use __weak

- remove trailing whitespace

- move uncached_access() inside `#ifndef __HAVE_PHYS_MEM_ACCESS_PROT' - it
  is otherwise unused.

Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

So as to return a uniform error -EOVERFLOW instead of a random one:

# kmem-seek 0xfffffffffffffff0
seek /dev/kmem: Device or resource busy
# kmem-seek 0xfffffffffffffff1
seek /dev/kmem: Block device required

Suggested by OGAWA Hirofumi.

Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove duplicated #include('s) in
  drivers/video/bfin-lq035q1-fb.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The function name must be followed by a space, hypen, space, and a short
description.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There was some conditionalizing for the LWMON5 boards in kernel source.
However infrastructure for enabling this isn't here so probably the
special case code can go as well.
Signed-off-by: NChristoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Acked-by: NAlexander Shishkin <virtuoso@slind.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

String constants that are continued on subsequent lines with \ will cause
spurious whitespace in the resulting output.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

An LCD controller driver for nuc900s.  The Linux LOGO is just fine and the
FB-Test application was ok, too.
Signed-off-by: NWang Qiang <rurality.linux@gmail.com>
Cc: Wang Zongshun <mcuos.com@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>