Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 20 6月, 2017 2 次提交
    • M
      perf script: Support -F brstackoff,dso · 106dacd8
      由 Mark Santaniello 提交于 
      The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:

  $ cat burncpu.cpp
  #include <dlfcn.h>

  int main() {
    void* handle = dlopen("./dso.so", RTLD_LAZY);
    if (!handle) return -1;

    typedef void (*fp)();
    fp do_nothing = (fp) dlsym(handle, "do_nothing");

    while(1) {
      do_nothing();
    }
  }

  $ cat dso.cpp
  extern "C" void do_nothing() {}

  $ cat build.sh
  #!/bin/bash
  g++ -shared dso.cpp -o dso.so
  g++ burncpu.cpp -o burncpu -ldl

I sampled the execution of this program with perf record -b.

Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:

  $ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
  0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0

Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary.  Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:

  $ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
  do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0

With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
  $ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
  0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: NMark Santaniello <marksan@fb.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      106dacd8
    • A
      perf script: Allow adding and removing fields · 36ce5651
      由 Andi Kleen 提交于 
      With 'perf script' it is common that we just want to add or remove a field.

Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.

This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines

For example to remove the comm field from PMU samples:

Previously

  $ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
  swapper  0 [000] 504345.383126:          1 cycles:  ffffffff90060c66 native_write_msr ([kernel.kallsyms])

with the new syntax

  perf script -F -comm | head -1
  0 [000] 504345.383126:          1 cycles:  ffffffff90060c66 native_write_msr ([kernel.kallsyms])

The new syntax cannot be mixed with normal overriding.

v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.

Committer testing:

  # perf record -a usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]

Without a explicit field list specified via -F, defaults to:

  # perf script | head -2
      perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
   swapper    0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
  #

Which is equivalent to:

  # perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
      perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
   swapper    0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
  #

So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:

  # perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
   6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
      0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
  #

With your patch this becomes simpler, one can remove fields by prefixing them
with '-':

  # perf script -F -comm | head -2
  6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
     0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
  #
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NMilian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      36ce5651
  3. 24 5月, 2017 1 次提交
    • N
      perf script: Add --inline option for debugging · 325fbff5
      由 Namhyung Kim 提交于 
      The --inline option is to show inlined functions in callchains.

For example:

  $ perf script
  a.out  5644 11611.467597:     309961 cycles:u:
                     790 main (/home/namhyung/tmp/perf/a.out)
                   20511 __libc_start_main (/usr/lib/libc-2.25.so)
                     8ba _start (/home/namhyung/tmp/perf/a.out)
  ...

  $ perf script --inline
  a.out  5644 11611.467597:     309961 cycles:u:
                     790 main (/home/namhyung/tmp/perf/a.out)
                         std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()
                         std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >
                         std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >
                         main
                   20511 __libc_start_main (/usr/lib/libc-2.25.so)
                     8ba _start (/home/namhyung/tmp/perf/a.out)
  ...
Reviewed-and-tested-by: NMilian Wolff <milian.wolff@kdab.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-5-namhyung@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      325fbff5
  5. 16 3月, 2017 1 次提交
    • A
      perf script: Add 'brstackinsn' for branch stacks · 48d02a1d
      由 Andi Kleen 提交于 
      Implement printing instruction sequences as hex dump for branch stacks.

This relies on the x86 instruction decoder used by the PT decoder to
find the lengths of instructions to dump them individually.

This is good enough for pattern matching.

This allows to study hot paths for individual samples, together with
branch misprediction and cycle count / IPC information if available (on
Skylake systems).

  % perf record -b ...
  % perf script -F brstackinsn
  ...
    read_hpet+67:
          ffffffff9905b843        insn: 74 ea                     # PRED
          ffffffff9905b82f        insn: 85 c9
          ffffffff9905b831        insn: 74 12
          ffffffff9905b833        insn: f3 90
          ffffffff9905b835        insn: 48 8b 0f
          ffffffff9905b838        insn: 48 89 ca
          ffffffff9905b83b        insn: 48 c1 ea 20
          ffffffff9905b83f        insn: 39 f2
          ffffffff9905b841        insn: 89 d0
          ffffffff9905b843        insn: 74 ea                     # PRED

Only works when no special branch filters are specified.

Occasionally the path does not reach up to the sample IP, as the LBRs
may be frozen before executing a final jump. In this case we print a
special message.

The instruction dumper piggy backs on the existing infrastructure from
the IP PT decoder.

An earlier iteration of this patch relied on a disassembler, but this
version only uses the existing instruction decoder.

Committer note:

Added hint about how to get suitable perf.data files for use with
'-F brstackinsm':

  $ perf record usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.018 MB perf.data (8 samples) ]
  $
  $ perf script -F brstackinsn
  Display of branch stack assembler requested, but non all-branch filter set
  Hint: run 'perf record -b ...'
  $
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20170223234634.583-1-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      48d02a1d
  7. 15 3月, 2017 1 次提交
    • H
      perf script: Add script print support for namespace events · 96a44bbc
      由 Hari Bathini 提交于 
      Introduce a new option to display events of type PERF_RECORD_NAMESPACES
and update perf-script documentation accordingly.

Shown below is output (trimmed) of perf script command with the newly
introduced option, on perf.data generated with perf record command using
--namespaces option.

  $ perf script --show-namespace-events
      swapper   0 [000]     0.000000: PERF_RECORD_NAMESPACES 1/1 - nr_namespaces: 7
                [0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
                 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
      swapper   0 [000]     0.000000: PERF_RECORD_NAMESPACES 2/2 - nr_namespaces: 7
                [0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
                 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]

Commiter notes:

Testing it:

Investigating that double PERF_RECORD_NAMESPACES for the 19155
pid/tid... Its more than that, there are two PERF_RECORD_COMM as well,
and with zeroed timestamps, so probably a synthesizing artifact...

  # perf script --show-task --show-namespace
  <SNIP>
      perf     0 [000]     0.000000: PERF_RECORD_COMM: perf:19154/19154
      perf     0 [000]     0.000000: PERF_RECORD_FORK(19155:19155):(19154:19154)
      perf     0 [000]     0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
          [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
           4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
      perf     0 [000]     0.000000: PERF_RECORD_COMM: perf:19155/19155
      perf     0 [000]     0.000000: PERF_RECORD_COMM: perf:19155/19155
      perf     0 [000]     0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7
          [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
           4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
   swapper     0 [000]  3110.881834:          1 cycles:  ffffffffa7060bf6 native_write_msr (/lib/modules/4.11.0-rc1+/build/vmlinux)

  <SNIP>
Signed-off-by: NHari Bathini <hbathini@linux.vnet.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891932627.25309.1941587059154176221.stgit@hbathini.in.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      96a44bbc
  9. 17 1月, 2017 1 次提交
  11. 02 12月, 2016 1 次提交
    • D
      perf script: Add option to specify time window of interest · a91f4c47
      由 David Ahern 提交于 
      Add option to allow user to control analysis window. e.g., collect data
for some amount of time and analyze a segment of interest within that
window.

Committer notes:

Testing it:

  # perf evlist -v
  cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
  #
  # perf script --hide-call-graph | head -15
    swapper    0 [0] 9693.370039:      1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370044:      1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370046:      7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370048:    126 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370049:   2701 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370051:  58823 cycles:ppp: ffffffffb90cd2e0 idle_cpu (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370059:      1 cycles:ppp: ffffffffb91a713a ctx_resched (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370062:      1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370064:     13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370065:    250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370067:   5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
       perf 5124 [2] 9693.370076:      1 cycles:ppp: ffffffffb91a76c1 __perf_event_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
       perf 5124 [2] 9693.370091:      1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
       perf 5124 [2] 9693.370095:      3 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
  #
  # perf script --hide-call-graph --time ,9693.370048
    swapper    0 [0] 9693.370039:      1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370044:      1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [0] 9693.370046:      7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
  # perf script --hide-call-graph --time 9693.370064,9693.370076
    swapper    0 [1] 9693.370064:     13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370065:    250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370067:   5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux)
    swapper    0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux)
  #
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-4-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a91f4c47
  13. 30 11月, 2016 1 次提交
    • D
      perf script: Add option to stop printing callchain · 64eff7d9
      由 David Ahern 提交于 
      Allow user to specify list of symbols which cause the dump of callchains
to stop at that symbol.

Committer notes:

Testing it:

  # perf record -ag usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.177 MB perf.data (33 samples) ]
  #
  # # Without it:
  #
  # perf script
  swapper   0 [000]  9693.370039:          1 cycles:ppp:
                  2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                 137ffeb start_kernel ([kernel.vmlinux].init.text)
                 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text)
                 137f419 x86_64_start_kernel ([kernel.vmlinux].init.text)

  swapper   0 [000]  9693.370044:          1 cycles:ppp:
                  20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                 137ffeb start_kernel ([kernel.vmlinux].init.text)
                 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text)
  #
  # # Using it to see just what are the calls from the 'remote_function' function:
  #
  # perf script --stop-bt remote_function
  swapper   0 [000]  9693.370039:          1 cycles:ppp:
                  2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)

  swapper   0 [000]  9693.370044:          1 cycles:ppp:
                  20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
                  3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480104021-36275-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      64eff7d9
  15. 24 10月, 2016 1 次提交
  17. 09 8月, 2016 1 次提交
  19. 24 6月, 2016 2 次提交
    • A
      perf script: Add callindent option · e216708d
      由 Adrian Hunter 提交于 
      Based on patches from Andi Kleen.

When printing PT instruction traces with perf script it is rather useful
to see some indentation for the call tree. This patch adds a new
callindent field to perf script that prints spaces for the function call
stack depth.

We already have code to track the function call stack for PT, that we
can reuse with minor modifications.

The resulting output is not quite as nice as ftrace yet, but a lot
better than what was there before.

Note there are some corner cases when the thread stack gets code
confused and prints incorrect indentation. Even with that it is fairly
useful.

When displaying kernel code traces it is recommended to run as root, as
otherwise perf doesn't understand the kernel addresses properly, and may
not reset the call stack correctly on kernel boundaries.

Example output:

	sudo perf-with-kcore record eg2 -a -e intel_pt// -- sleep 1
	sudo perf-with-kcore script eg2 --ns -F callindent,time,comm,pid,sym,ip,addr,flags,cpu --itrace=cre | less
	...
         swapper     0 [000]  5830.389116586:   call        irq_exit                                                     ffffffff8104d620 smp_call_function_single_interrupt+0x30 => ffffffff8107e720 irq_exit
         swapper     0 [000]  5830.389116586:   call            idle_cpu                                                 ffffffff8107e769 irq_exit+0x49 => ffffffff810a3970 idle_cpu
         swapper     0 [000]  5830.389116586:   return          idle_cpu                                                 ffffffff810a39b7 idle_cpu+0x47 => ffffffff8107e76e irq_exit
         swapper     0 [000]  5830.389116586:   call            tick_nohz_irq_exit                                       ffffffff8107e7bd irq_exit+0x9d => ffffffff810f2fc0 tick_nohz_irq_exit
         swapper     0 [000]  5830.389116919:   call                __tick_nohz_idle_enter                               ffffffff810f2fe0 tick_nohz_irq_exit+0x20 => ffffffff810f28d0 __tick_nohz_idle_enter
         swapper     0 [000]  5830.389116919:   call                    ktime_get                                        ffffffff810f28f1 __tick_nohz_idle_enter+0x21 => ffffffff810e9ec0 ktime_get
         swapper     0 [000]  5830.389116919:   call                        read_tsc                                     ffffffff810e9ef6 ktime_get+0x36 => ffffffff81035070 read_tsc
         swapper     0 [000]  5830.389116919:   return                      read_tsc                                     ffffffff81035084 read_tsc+0x14 => ffffffff810e9efc ktime_get
         swapper     0 [000]  5830.389116919:   return                  ktime_get                                        ffffffff810e9f46 ktime_get+0x86 => ffffffff810f28f6 __tick_nohz_idle_enter
         swapper     0 [000]  5830.389116919:   call                    sched_clock_idle_sleep_event                     ffffffff810f290b __tick_nohz_idle_enter+0x3b => ffffffff810a7380 sched_clock_idle_sleep_event
         swapper     0 [000]  5830.389116919:   call                        sched_clock_cpu                              ffffffff810a738b sched_clock_idle_sleep_event+0xb => ffffffff810a72e0 sched_clock_cpu
         swapper     0 [000]  5830.389116919:   call                            sched_clock                              ffffffff810a734d sched_clock_cpu+0x6d => ffffffff81035750 sched_clock
         swapper     0 [000]  5830.389116919:   call                                native_sched_clock                   ffffffff81035754 sched_clock+0x4 => ffffffff81035640 native_sched_clock
         swapper     0 [000]  5830.389116919:   return                              native_sched_clock                   ffffffff8103568c native_sched_clock+0x4c => ffffffff81035759 sched_clock
         swapper     0 [000]  5830.389116919:   return                          sched_clock                              ffffffff8103575c sched_clock+0xc => ffffffff810a7352 sched_clock_cpu
         swapper     0 [000]  5830.389116919:   return                      sched_clock_cpu                              ffffffff810a7356 sched_clock_cpu+0x76 => ffffffff810a7390 sched_clock_idle_sleep_event
         swapper     0 [000]  5830.389116919:   return                  sched_clock_idle_sleep_event                     ffffffff810a7391 sched_clock_idle_sleep_event+0x11 => ffffffff810f2910 __tick_nohz_idle_enter
	...
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e216708d
    • A
      perf script: Print sample flags more nicely · 055cd33d
      由 Adrian Hunter 提交于 
      The flags field is synthesized and may have a value when Instruction
Trace decoding. The flags are "bcrosyiABEx" which stand for branch,
call, return, conditional, system, asynchronous, interrupt, transaction
abort, trace begin, trace end, and in transaction, respectively.

Change the display so that known combinations of flags are printed more
nicely e.g.: "call" for "bc", "return" for "br", "jcc" for "bo", "jmp"
for "b", "int" for "bci", "iret" for "bri", "syscall" for "bcs",
"sysret" for "brs", "async" for "by", "hw int" for "bcyi", "tx abrt" for
"bA", "tr strt" for "bB", "tr end" for "bE".

However the "x" flag will be displayed separately in those cases e.g.
"jcc (x)" for a condition branch within a transaction.

Example:

    perf record -e intel_pt//u ls
    perf script --ns -F comm,cpu,pid,tid,time,ip,addr,sym,dso,symoff,flags
    ...
    ls  3689/3689  [001]  2062.020965237:   jcc          7f06a958847a _dl_sysdep_start+0xfa (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a9588450 _dl_sysdep_start+0xd0 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020965237:   jmp          7f06a9588461 _dl_sysdep_start+0xe1 (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a95885a0 _dl_sysdep_start+0x220 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020965237:   jmp          7f06a95885a4 _dl_sysdep_start+0x224 (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a9588470 _dl_sysdep_start+0xf0 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020965904:   call         7f06a95884c3 _dl_sysdep_start+0x143 (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a9589140 brk+0x0 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020965904:   syscall      7f06a958914a brk+0xa (/lib/x86_64-linux-gnu/ld-2.19.so) =>                0 [unknown] ([unknown])
    ls  3689/3689  [001]  2062.020966237:   tr strt                 0 [unknown] ([unknown]) =>     7f06a958914c brk+0xc (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020966237:   return       7f06a9589165 brk+0x25 (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a95884c8 _dl_sysdep_start+0x148 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020966237:   jcc          7f06a95884d7 _dl_sysdep_start+0x157 (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a95885f0 _dl_sysdep_start+0x270 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020966237:   call         7f06a95885f0 _dl_sysdep_start+0x270 (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a958ac50 strlen+0x0 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020966237:   jcc          7f06a958ac6e strlen+0x1e (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a958ac60 strlen+0x10 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ...
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      055cd33d
  21. 22 6月, 2016 1 次提交
  23. 20 5月, 2016 1 次提交
    • A
      perf tools: Fix usage of max_stack sysctl · fe176085
      由 Arnaldo Carvalho de Melo 提交于 
      We cannot limit processing stacks from the current value of the sysctl,
as we may be processing perf.data files, possibly from other machines.

Instead use the old PERF_MAX_STACK_DEPTH, the sysctl default, that can
be overriden using --max-stack or equivalent.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Fixes: 4cb93446 ("perf tools: Set the maximum allowed stack from /proc/sys/kernel/perf_event_max_stack")
Link: http://lkml.kernel.org/n/tip-eqeutsr7n7wy0c36z24ytvii@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      fe176085
  25. 27 4月, 2016 1 次提交
  27. 15 4月, 2016 1 次提交
  29. 30 3月, 2016 1 次提交
  31. 30 10月, 2015 1 次提交
    • S
      perf script: Enable printing of branch stack · dc323ce8
      由 Stephane Eranian 提交于 
      This patch improves perf script by enabling printing of the
branch stack via the 'brstack' and 'brstacksym' arguments to
the field selection option -F. The option is off by default
and operates only if the perf.data file has branch stack content.

The branches are printed in to/from pairs. The most recent branch
is printed first. The number of branch entries vary based on the
underlying hardware and filtering used.

The brstack prints FROM/TO addresses in raw hexadecimal format.
The brstacksym prints FROM/TO addresses in symbolic form wherever
possible.

 $ perf script -F ip,brstack
  5d3000 0x401aa0/0x5d2000/M/-/-/-/0 ...

 $ perf script -F ip,brstacksym
  4011e0 noploop+0x0/noploop+0x0/P/-/-/0

The notation F/T/M/X/A/C describes the attributes of the branch.
F=from, T=to, M/P=misprediction/prediction, X=TSX, A=TSX abort, C=cycles (SKL)
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yuanfang Chen <cyfmxc@gmail.com>
Link: http://lkml.kernel.org/r/1441039273-16260-5-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      dc323ce8
  33. 29 9月, 2015 1 次提交
  35. 01 9月, 2015 1 次提交
  37. 28 8月, 2015 1 次提交
  39. 21 8月, 2015 1 次提交
  41. 10 8月, 2015 1 次提交
  43. 24 7月, 2015 1 次提交
  45. 06 5月, 2015 1 次提交
  47. 29 4月, 2015 2 次提交
    • A
      perf script: Add field option 'flags' to print sample flags · 400ea6d3
      由 Adrian Hunter 提交于 
      Instruction tracing will typically have access to information about the
instruction being executed for a particular ip sample.  Some of that
information will be available in the 'flags' member of struct
perf_sample.

With the addition of transactions events synthesis to Instruction
Tracing options, there is a need to be able easily to see the flags
because they show whether the ip is at the start, commit or abort of a
tranasaction.

Consequently add an option to display the flags.

The flags are "bcrosyiABEx" which stand for branch, call, return,
conditional, system, asynchronous, interrupt, transaction abort, trace
begin, trace end, and in transaction, respectively.

Example using Intel PT:

perf script -fip,time,event,sym,addr,flags

...
 1288.721584105: branches:u:   bo              401146 main =>           401152 main
 1288.721584105: transactions:   x                   0           401164 main
 1288.721584105: branches:u:   bx              40117c main =>           40119b main
 1288.721584105: branches:u:   box             4011a4 main =>           40117e main
 1288.721584105: branches:u:   bcx             401187 main =>           401094 g
...
 1288.721591645: branches:u:   bx              4010c4 g =>           4010cb g
 1288.721591645: branches:u:   brx             4010cc g =>           401189 main
 1288.721591645: transactions:                       0           4011a6 main
 1288.721593199: branches:u:   b               4011a9 main =>           4011af main
 1288.721593199: branches:u:   bo              4011bc main =>           40113e main
 1288.721593199: branches:u:   b               401150 main =>           40115a main
 1288.721593199: transactions:   x                   0           401164 main
 1288.721593199: branches:u:   bx              40117c main =>           40119b main
 1288.721593199: branches:u:   box             4011a4 main =>           40117e main
 1288.721593199: branches:u:   bcx             401187 main =>           40105e f
...
 1288.722284747: branches:u:   brx             401093 f =>           401189 main
 1288.722284747: branches:u:   box             4011a4 main =>           40117e main
 1288.722284747: branches:u:   bcx             401187 main =>           40105e f
 1288.722285883: transactions:   bA                  0           401071 f
 1288.722285883: branches:u:   bA              401071 f =>           40116a main
 1288.722285883: branches:u:   bE              40116a main =>                0 [unknown]
 1288.722297174: branches:u:   bB                   0 [unknown] =>           40116a main
...
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-26-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      400ea6d3
    • A
      perf script: Add Instruction Tracing support · 7a680eb9
      由 Adrian Hunter 提交于 
      Add support for decoding an AUX area assuming it contains instruction
tracing data.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-17-git-send-email-adrian.hunter@intel.com
[ Do not use -Z as an alternative to --itrace ]
[ Fixed initialization of itrace_synth_opts struct fields on older gcc versions ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      7a680eb9
  49. 25 3月, 2015 1 次提交
  51. 22 1月, 2015 1 次提交
  53. 18 10月, 2014 1 次提交
    • J
      perf script: Add period data column · 535aeaae
      由 Jiri Olsa 提交于 
      Adding period data column to be displayed in perf script.  It's possible
to get period values using -f option, like:

  $ perf script -f comm,tid,time,period,ip,sym,dso
          :26019 26019 52414.329088:       3707  ffffffff8105443a native_write_msr_safe ([kernel.kallsyms])
          :26019 26019 52414.329088:         44  ffffffff8105443a native_write_msr_safe ([kernel.kallsyms])
          :26019 26019 52414.329093:       1987  ffffffff8105443a native_write_msr_safe ([kernel.kallsyms])
          :26019 26019 52414.329093:          6  ffffffff8105443a native_write_msr_safe ([kernel.kallsyms])
              ls 26019 52414.329442:     537558        3407c0639c _dl_map_object_from_fd (/usr/lib64/ld-2.17.so)
              ls 26019 52414.329442:       2099        3407c0639c _dl_map_object_from_fd (/usr/lib64/ld-2.17.so)
              ls 26019 52414.330181:    1242100        34080917bb get_next_seq (/usr/lib64/libc-2.17.so)
              ls 26019 52414.330181:       3774        34080917bb get_next_seq (/usr/lib64/libc-2.17.so)
              ls 26019 52414.331427:    1083662  ffffffff810c7dc2 update_curr ([kernel.kallsyms])
              ls 26019 52414.331427:        360  ffffffff810c7dc2 update_curr ([kernel.kallsyms])
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: "Jen-Cheng(Tommy) Huang" <tommy24@gatech.edu>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jen-Cheng(Tommy) Huang <tommy24@gatech.edu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1408977943-16594-9-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      535aeaae
  55. 16 10月, 2014 1 次提交
  57. 11 12月, 2013 1 次提交
  59. 10 12月, 2013 1 次提交
    • A
      perf script: Add an option to print the source line number · cc8fae1d
      由 Adrian Hunter 提交于 
      Add field 'srcline' that displays the source file name and line number
associated with the sample ip.  The information displayed is the same as
from addr2line.

 $ perf script -f comm,tid,pid,time,ip,sym,dso,symoff,srcline
            grep 10701/10701 2497321.421013:  ffffffff81043ffa native_write_msr_safe+0xa ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/msr.h:95
            grep 10701/10701 2497321.421984:  ffffffff8165b6b3 _raw_spin_lock+0x13 ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/spinlock.h:54
            grep 10701/10701 2497321.421990:  ffffffff810b64b3 tick_sched_timer+0x53 ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/time/tick-sched.c:840
            grep 10701/10701 2497321.421992:  ffffffff8106f63f run_timer_softirq+0x2f ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/timer.c:1372
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386315778-11633-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      cc8fae1d
  61. 28 11月, 2013 2 次提交
  63. 31 1月, 2012 2 次提交
    • A
      perf script: Add option resolving vmlinux path · 0bc8d205
      由 Akihiro Nagai 提交于 
      Add the option get the path of [kernel.kallsyms].
Specify '--show-kernel-path' option to use this function.
This patch enables other applications to use this output easily.

Without --show-kernel-path  option

ffffffff81467612 irq_return ([kernel.kallsyms])
ffffffff81467612 irq_return ([kernel.kallsyms])
    7f24fc02a6b3 _start (/lib64/ld-2.14.so)
[snip]

With --show-kernel-path option

ffffffff81467612 irq_return (/lib/modules/3.2.0+/build/vmlinux)
ffffffff81467612 irq_return (/lib/modules/3.2.0+/build/vmlinux)
    7f24fc02a6b3 _start (/lib64/ld-2.14.so)
[snip]

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20120130044320.2384.73322.stgit@linux3Signed-off-by: NAkihiro Nagai <akihiro.nagai.hw@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0bc8d205
    • A
      perf script: Add the offset field specifier · a978f2ab
      由 Akihiro Nagai 提交于 
      Add the offset field specifier 'symoff' to show the offset from
the symbols in the output of perf-script. We can get the more
detailed address information.

Output sample:
ffffffff81467612 irq_return+0x0 => 301ec016b0 _start+0x0
ffffffff81467612 irq_return+0x0 => 301ec016b0 _start+0x0
      301ec016b3 _start+0x3     => 301ec04b70 _dl_start+0x0
ffffffff81467612 irq_return+0x0 => 301ec04b70 _dl_start+0x0
ffffffff81467612 irq_return+0x0 => 301ec04b96 _dl_start+0x26
ffffffff81467612 irq_return+0x0 => 301ec04b9d _dl_start+0x2d
      301ec04beb _dl_start+0x7b => 301ec04c0d _dl_start+0x9d
      301ec04c11 _dl_start+0xa1 => 301ec04bf0 _dl_start+0x80
[snip]

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20120130044314.2384.67094.stgit@linux3Signed-off-by: NAkihiro Nagai <akihiro.nagai.hw@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a978f2ab
  65. 24 12月, 2011 1 次提交
    • R
      perf report: Accept fifos as input file · efad1415
      由 Robert Richter 提交于 
      The default input file for perf report is not handled the same way as
perf record does it for its output file. This leads to unexpected
behavior of perf report, etc. E.g.:

 # perf record -a -e cpu-cycles sleep 2 | perf report | cat
 failed to open perf.data: No such file or directory  (try 'perf record' first)

While perf record writes to a fifo, perf report expects perf.data to be
read. This patch changes this to accept fifos as input file.

Applies to the following commands:

 perf annotate
 perf buildid-list
 perf evlist
 perf kmem
 perf lock
 perf report
 perf sched
 perf script
 perf timechart

Also fixes char const* -> const char* type declaration for filename
strings.

v2:
* Prevent potential null pointer access to input_name in
  builtin-report.c. Needed due to removal of patch "perf report: Setup
  browser if stdout is a pipe"

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-5-git-send-email-robert.richter@amd.comSigned-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      efad1415
  67. 28 11月, 2011 2 次提交