restore rtc_status from migration or save/restore
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Add a new parameter to know vcpus who received the interrupt.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Add vcpu info to ioapic_update_eoi, so we can know which vcpu
issued this EOI.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

For a given vcpu, kvm_apic_match_dest() will tell you whether
the vcpu in the destination list quickly. Drop kvm_calculate_eoi_exitmap()
and use kvm_apic_match_dest() instead.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

If the guest specifies a IOAPIC_REG_SELECT with an invalid value and follows
that with a read of the IOAPIC_REG_WINDOW KVM does not properly validate
that request.  ioapic_read_indirect contains an
ASSERT(redir_index < IOAPIC_NUM_PINS), but the ASSERT has no effect in
non-debug builds.  In recent kernels this allows a guest to cause a kernel
oops by reading invalid memory.  In older kernels (pre-3.3) this allows a
guest to read from large ranges of host memory.

Tested: tested against apic unit tests.
Signed-off-by: NAndrew Honig <ahonig@google.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Virtual interrupt delivery avoids KVM to inject vAPIC interrupts
manually, which is fully taken care of by the hardware. This needs
some special awareness into existing interrupr injection path:

- for pending interrupt, instead of direct injection, we may need
  update architecture specific indicators before resuming to guest.

- A pending interrupt, which is masked by ISR, should be also
  considered in above update action, since hardware will decide
  when to inject it at right time. Current has_interrupt and
  get_interrupt only returns a valid vector from injection p.o.v.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NKevin Tian <kevin.tian@intel.com>
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

This hack is wrong. The pin number of PIT is connected to
2 not 0. This means this hack never takes effect. So it is ok
to remove it.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

We validate irq pin number when routing is setup, so
code handling illegal irq # in pic and ioapic on each injection
is never called.
Drop it, replace with BUG_ON to catch out of bounds access bugs.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

When more than 1 source id is in use for the same GSI, we have the
following race related to handling irq_states race:

CPU 0 clears bit 0. CPU 0 read irq_state as 0. CPU 1 sets level to 1.
CPU 1 calls kvm_ioapic_set_irq(1). CPU 0 calls kvm_ioapic_set_irq(0).
Now ioapic thinks the level is 0 but irq_state is not 0.

Fix by performing all irq_states bitmap handling under pic/ioapic lock.
This also removes the need for atomics with irq_states handling.
Reported-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Intel spec says that TMR needs to be set/cleared
when IRR is set, but kvm also clears it on  EOI.

I did some tests on a real (AMD based) system,
and I see same TMR values both before
and after EOI, so I think it's a minor bug in kvm.

This patch fixes TMR to be set/cleared on IRR set
only as per spec.

And now that we don't clear TMR, we can save
an atomic read of TMR on EOI that's not propagated
to ioapic, by checking whether ioapic needs
a specific vector first and calculating
the mode afterwards.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Drop bsp_vcpu pointer from kvm struct since its only use is incorrect
anyway.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This fixes byte accesses to IOAPIC_REG_SELECT as mandated by at least the
ICH10 and Intel Series 5 chipset specs. It also makes ioapic_mmio_write
consistent with ioapic_mmio_read, which also allows byte and word accesses.
Signed-off-by: NJulian Stecklina <js@alien8.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently the method of dealing with an IO operation on a bus (PIO/MMIO)
is to call the read or write callback for each device registered
on the bus until we find a device which handles it.

Since the number of devices on a bus can be significant due to ioeventfds
and coalesced MMIO zones, this leads to a lot of overhead on each IO
operation.

Instead of registering devices, we now register ranges which points to
a device. Lookup is done using an efficient bsearch instead of a linear
search.

Performance test was conducted by comparing exit count per second with
200 ioeventfds created on one byte and the guest is trying to access a
different byte continuously (triggering usermode exits).
Before the patch the guest has achieved 259k exits per second, after the
patch the guest does 274k exits per second.

Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Function ioapic_debug() in the ioapic_deliver() misnames
one filed by reference. This patch correct it.
Signed-off-by: NLiu Yuan <tailai.ly@taobao.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Devices register mask notifier using gsi, but irqchip knows about
irqchip/pin, so conversion from irqchip/pin to gsi should be done before
looking for mask notifier to call.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Read ioapic->irr inside ioapic->lock protected section.

KVM-Stable-Tag
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

kvm_set_irq is used from non sleepable contexes, so convert ioapic from
mutex to spinlock.

KVM-Stable-Tag.
Tested-by: NRalf Bonenkamp <ralf.bonenkamp@swyx.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

If we fail to init ioapic device or the fail to setup the default irq
routing, the device register by kvm_create_pic() and kvm_ioapic_init()
remain unregister. This patch fixed to do this.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

kvm->arch.vioapic should be NULL in case of kvm_ioapic_init() failure
due to cannot register io dev.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

When the guest acknowledges an interrupt, it sends an EOI message to the local
apic, which broadcasts it to the ioapic.  To handle the EOI, we need to take
the ioapic mutex.

On large guests, this causes a lot of contention on this mutex.  Since large
guests usually don't route interrupts via the ioapic (they use msi instead),
this is completely unnecessary.

Avoid taking the mutex by introducing a handled_vectors bitmap.  Before taking
the mutex, check if the ioapic was actually responsible for the acked vector.
If not, we can return early.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The allows removal of irq_lock from the injection path.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This bug was introduced by b4a2f5e7.

Cc: stable@kernel.org
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Today kvm_io_bus_regsiter_dev() returns void and will internally BUG_ON
if it fails.  We want to create dynamic MMIO/PIO entries driven from
userspace later in the series, so we need to enhance the code to be more
robust with the following changes:

   1) Add a return value to the registration function
   2) Fix up all the callsites to check the return code, handle any
      failures, and percolate the error up to the caller.
   3) Add an unregister function that collapses holes in the array
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add tracepoint in msi/ioapic/pic set_irq() functions,
in IPI sending and in the point where IRQ is placed into
apic's IRR.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Cosmetic only. No logic is changed by this patch.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

There is a missing unlock on one fail path in ioapic_mmio_write,
fix that.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This changes bus accesses to use high-level kvm_io_bus_read/kvm_io_bus_write
functions. in_range now becomes unused so it is removed from device ops in
favor of read/write callbacks performing range checks internally.

This allows aliasing (mostly for in-kernel virtio), as well as better error
handling by making it possible to pass errors up to userspace.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Use slots_lock to protect device list on the bus.  slots_lock is already
taken for read everywhere, so we only need to take it for write when
registering devices.  This is in preparation to removing in_range and
kvm->lock around it.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Use it instead of open code "vcpu_id zero is BSP" assumption.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce irq_lock, and use to protect ioapic data structures.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We modernize the io_device code so that we use container_of() instead of
dev->private, and move the vtable to a separate ops structure
(theoretically allows better caching for multiple instances of the same
ops structure)
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Acked-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The check for an edge is broken in current ioapic code. ioapic->irr is
cleared on each edge interrupt by ioapic_service() and this makes
old_irr != ioapic->irr condition in kvm_ioapic_set_irq() to be always
true. The patch fixes the code to properly recognise edge.

Some HW emulation calls set_irq() without level change. If each such
call is propagated to an OS it may confuse a device driver. This is the
case with keyboard device emulation and Windows XP x64  installer on SMP VM.
Each keystroke produce two interrupts (down/up) one interrupt is
submitted to CPU0 and another to CPU1. This confuses Windows somehow
and it ignores keystrokes.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Deliver interrupt during destination matching loop.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use kvm_apic_match_dest() in kvm_get_intr_delivery_bitmask() instead
of duplicating the same code. Use kvm_get_intr_delivery_bitmask() in
apic_send_ipi() to figure out ipi destination instead of reimplementing
the logic.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

ioapic_deliver() and kvm_set_msi() have code duplication. Move
the code into ioapic_deliver_entry() function and call it from
both places.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Get rid of ioapic_inj_irq() and ioapic_inj_nmi() functions.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>