The SERR_INT register is very similar to the other IIR registers, so
let's zero it at preinstall/uninstall and WARN for a non-zero value at
postinstall, just like we do with the other IIR registers. For this
one, there's no need to double-clear since it can't store more than
one interrupt.

v2: - Remove the is_zero assertion (Ben).
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It should already be masked and disabled and zeroed at the preinstall
and uninstall stages. Also, the current code just writes to IIR once,
and this is not a guarantee that it will be cleared, so it's wrong
anyway.

The whole reason for the paranoia is that we're going to start calling
the IRQ preinstall/postinstall/uninstall from the runtime PM
callbacks, so we need to make sure everything is behaving as expected.

v2: - Change the original DRM_ERROR to WARN and clear IIR in case it's
      not zero (Ben).
    - Improve commit message (Daniel).
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And the equivalent GEN8_IRQ_INIT_NDX macro. These macros are for the
postinstall functions. The next patch will improve this macro.

v2: - Adjust to the new POSTING_READ scheme (Ben).

Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The IRQ_INIT and IRQ_FINI macros are basically the same thing, with
the exception that IRQ_FINI doesn't properly clear IIR twice and
doesn't have as many POSTING_READs as IRQ_INIT. So rename the INIT
macro to IRQ_RESET and use it everywhere.

v2: - Fix error in the commit message (Chris).
    - Adjust to the new POSTING_READ scheme (Ben).
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's the only thing missing, apparently.

v2: - Fix typo (Ben).
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Same as the _INIT macro: the goal is to reuse the GEN8 macros, but
there are still some slight differences.

v2: - Rebase.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And rename it to GEN5_IRQ_INIT.

We have discussed doing equivalent changes on July 2013, and I even
sent a patch series for this: "[PATCH 00/15] Unify interrupt register
init/reset". Now that the BDW code was merged, I have one more
argument in favor of these changes.

Here's what really changes with the Gen 5 IRQ init code:
  - We now clear the IIR registers at preinstall (they are also
    cleared at postinstall, but we will change that later).
  - We have an additional POSTING_READ at the IMR register.

v2: - Fix typo in commit message.
    - Add POSTING_READ calls to the macros (Ben, Daniel, Jani).

Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This interrupt gets initialized with a different IER value, so it was
not using the macro. The problem is that we plan to modify the macro
to make it do additional things, and we want the SDE interrupts
updated too. So let's make sure we call the macro, then, after it, we
do the necessary SDE-specific changes.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The goal is to reuse the GEN8 macros, but a few changes are needed, so
let's make things easier to review.

I could also use these macros on older code, but since I plan to
change how the interrupts are initialized, we'll risk breaking the
older code in the next commits, so I'll leave this out for now.

v2: - Rebase.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch reads the DRRS support and Mode type from VBT fields.
The read information will be stored in VBT struct during BIOS
parsing. The above functionality is needed for decision making
whether DRRS feature is supported in i915 driver for eDP panels.
This information helps us decide if seamless DRRS can be done
at runtime to support certain power saving features. This patch
was tested by setting necessary bit in VBT struct and merging
the new VBT with system BIOS so that we can read the value.

v2: Incorporated review comments from Chris Wilson
Removed "intel_" as a prefix for DRRS specific declarations.

v3: Incorporated Jani's review comments
Removed function which deducts drrs mode from panel_type. Modified some
print statements. Made changes to use DRRS_NOT_SUPPORTED as 0 instead of -1.

v4: Incorporated Jani's review comments.
Modifications around setting vbt drrs_type.
Signed-off-by: NPradeep Bhat <pradeep.bhat@intel.com>
Signed-off-by: NVandana Kannan <vandana.kannan@intel.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
[danvet: Drop the misleading/redundant comment about the added drrs
field in the vbt struct as discussed with Jani on irc.]
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently drm_cflush_virt_rage() takes a char* so the caller probably
has to do pointless casting to avoid compiler warnings. Make the
argument void* instead to avoid such issues.

v2: Use void* arithmetic (Chris)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Pull all the gmch platform hotplug interrupt handling into one
function.

v2: Move the IIR check to the caller
    s/drm_i915_private_t/struct drm_i915_private/
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: Add posting read comment suggested by Chris.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We have a need for duplicated parsing of the RP_STATE_CAPS register (and
the setting of the associated fields). To reuse some code, we can
extract the function into a simple helper.

This patch also addresses the fact that we missed doing this for gen8,
something we should have done anyway.

This could be two patches, one to extract, and one to add gen8, but it's
trivial enough that I think one is fine. I will accept a request to
split it. Please notice the fix addressed by v2 below.

Valleyview is left untouched because it is different.

v2: Logically rebased on top of
commit dd0a1aa1
Author: Jeff McGee <jeff.mcgee@intel.com>
Date:   Tue Feb 4 11:32:31 2014 -0600

    drm/i915: Restore rps/rc6 on reset

Note with the above change the fix for gen8 is also handled (which was
not the case in Jeff's original patch).
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Programming it outside of the rp0-rp1 range is considered a programming
error. Since we do not know that the previous value would actually be in
the range, program something we've read from the hardware, and therefore
know will work.

This is potentially an issue for platforms whose ranges are outside the
norms given in the programming guide (ie. early silicon)

v2: Use RP1 instead of RPn
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Split the post_disable hooks for DP to g4x and vlv variants. We'll
need another variant soon, so this should make it look a bit cleaner.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These were apparently meant to protect the SAREA which only has
room for two pipes, but things clearly went a bit wonky when
first the .update_plane() hooks were split up and then pipe C
got introduced.

The checks actually protecting the SAREA live in
intel_crtc_update_sarea() these days, so the checks in the primary
plane update hooks are just historical leftovers which are to be
eliminated.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Progess according to the deprecation plan laid out in

commit b30324ad
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Nov 13 22:11:25 2013 +0100

    drm/i915: Deprecated UMS support

and disable UMS for 3.16. Note that it has been over 5 years since the
last UMS-supporting piece of userspace was released.
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There are no longer users of drm_i915_private_t. Drop the typedef. Good
riddance.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NChris Wilson <chris@chris-wislon.co.uk>
[danvet: Add the hunk in i915_cmd_parser.c here which had to be
relocated to the how this was merged.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The reg_read whitelist has a gen bitmask to code the gens we're allowing
the register to be read on. Until now, it was a literal, but we can be
a bit more expressive.

To ease the review, a small test program:

  $ cat bit-range.c
  #include <stdio.h>
  #include <stdint.h>

  #define U32_C(x)		x ## U
  #define GENMASK(h, l)		(((U32_C(1) << ((h) - (l) + 1)) - 1) << (l))
  #define GEN_RANGE(l, h)	GENMASK(h, l)

  int main(int argc, char **argv)
  {
	printf("0x%08x\n", GEN_RANGE(1, 1));
	printf("0x%08x\n", GEN_RANGE(1, 2));
	printf("0x%08x\n", GEN_RANGE(4, 4));
	printf("0x%08x\n", GEN_RANGE(4, 5));
	printf("0x%08x\n", GEN_RANGE(1, 31));
	printf("0x%08x\n", GEN_RANGE(4, 8));

	return 0;
  }
  $ ./bit-range
  0x00000002
  0x00000006
  0x00000010
  0x00000030
  0xfffffffe
  0x000001f0
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Let's change the i915_cur_delayinfo to i915_frequency_info to be in sync
with new RPS naming convention.

v2: Add "i915_frequency_info" as debugfs interface name (Ben)
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These defines are only used in intel_uncore.c.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

That function isn't used outside this file anymore.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

DRM_DEBUG_KMS includes printing the function name.
Signed-off-by: NChristoph Jaeger <christophjaeger@linux.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Those values are, global, only used in one function and already stored
in mode_config.cursor_{width,height}.

As a result, this initialization code has been moved from the
crtc_init() function to the global modeset_init() one.

I also renamed CURSOR_{WIDTH,HEIGHT} to MAX_CURSOR_{WIDTH,HEIGHT} to be
more accurate about what these value really are.

Cc: Sagar Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Besides D0 device state we need the proper power wells to be on on
some platforms, so get the port power domain reference instead of an RPM
reference.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAntti Koskipää <antti.koskipaa@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Instead of reading out the CD clock rate from the HW at each modeset, do
this only during driver init and resume and use the cached value during
modeset. This moves things towards a state where the sw and hw side
setup is separated. It's also needed for VLV RPM, where we don't put
device into D0 state until modeset_global_resources is called and thus
can't access any display/gfx registers.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAntti Koskipää <antti.koskipaa@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When trying to determine whether RPS is working as intended, more
information is better. In particular, what interrupts are being
generated and the various thresholds for generating them.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Mesa needs to be able to write OACONTROL in order to expose the
Observability Architecture's performance counters via OpenGL.
Signed-off-by: NKenneth Graunke <kenneth@whitecape.org>
[danvet: Add comment that this is just a temporary work-around and
that we need to check more things before we can allow OACONTROL writes
for real everywhere.]
[danvet 2: Squash in fixup to avoid a DRM_ERROR due to unsorted reg
list, spotted by Jani.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: rebased

OTC-Tracker: AXIA-4631
Change-Id: I6747457e1fe7494bd42787af51198fcba398ad78
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
[danvet: Resolve tiny conflict in module option text.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So userspace can query the kernel for command parser support.

v2: Add i915_cmd_parser_get_version(), history log, and kerneldoc

OTC-Tracker: AXIA-4631
Change-Id: I58af650db9f6753c2dcac9c54ab432fd31db302f
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

PIPE_CONTROL and MI_FLUSH_DW have bits that would write to the
hardware status page. The driver stores request tracking info
there, so don't let userspace overwrite it.

v2: trailing comma fix, rebased
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Various commands that access memory have a bit to determine whether
the graphics address specified in the command should use the GGTT or
PPGTT for translation. These checks ensure that the bit indicates
PPGTT translation.

Most of these checks use the existing bit-checking infrastructure.
The PIPE_CONTROL and MI_FLUSH_DW commands, however, are multi-function
commands. The GGTT/PPGTT bit is only relevant for certain uses of the
command. As such, this change also extends the bit-checking code to
include a "condition" mask and offset. If the condition mask is non-zero
then the parser only performs the bit check when the bits specified by
the condition mask/offset are also non-zero.

NOTE: At this point in the series PPGTT must be enabled for the parser
to work correctly. If it's not enabled, userspace will not be setting
the PPGTT bits the way the parser requires. VLV is the only platform
where this is a problem, so at this point, we disable parsing for VLV.

v2: whitespace and trailing commas fixes, rebased

OTC-Tracker: AXIA-4631
Change-Id: I3f4c76b6734f1956ec47e698230f97d0998ff92b
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
[danvet: Drop the unecessary cast Jani spotted.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The driver leaves most interrupts masked during normal operation,
so there would have to be additional work to enable userspace to
safely request/receive an interrupt.

v2: trailing commas, rebased
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

MI_STORE_REGISTER_MEM, MI_LOAD_REGISTER_MEM, and MI_LOAD_REGISTER_IMM
commands allow userspace access to registers. Only certain registers
should be allowed for such access, so enable checking for those commands.
Each ring gets its own register whitelist.

MI_LOAD_REGISTER_REG on HSW also allows register access but is currently
unused by userspace components. Leave it rejected.

PIPE_CONTROL and MEDIA_VFE_STATE allow register access based on certain
bits being set. Reject those as well.

v2: trailing commas, rebased

OTC-Tracker: AXIA-4631
Change-Id: Ie614a2f0eb2e5917de809e5a17957175d24cc44f
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These are used to implement scanline waits in the X server.

v2: Use #defines instead of magic numbers
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These registers are currently used by mesa for blitting,
transform feedback extensions, and performance monitoring
extensions.

v2: REG64 macro
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The Intel DDX uses these to implement scanline waits in the X server.
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The spec defines most of these commands as privileged. A few others,
like the semaphore mbox command and some display commands, are also
reserved for the driver's use. Subsequent patches relax some of
these restrictions.

v2: Rebased
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add command tables defining irregular length commands for each ring.
This requires a few new command opcode definitions.

v2: Whitespace adjustment in command definitions, sparse fix for !F

OTC-Tracker: AXIA-4631
Change-Id: I064bceb457e15f46928058352afe76d918c58ef5
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>