Signed-off-by: NNikolay Borisov <kernel@kyup.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNikolay Borisov <kernel@kyup.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNikolay Borisov <kernel@kyup.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNikolay Borisov <kernel@kyup.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor and consolidate cwnd and rate updates into a new function
tcp_cong_control().
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change enables congestion control to update cwnd based on
not only packet cumulatively acked but also packets delivered
out-of-order. This makes congestion control robust against packet
reordering because it may raise cwnd as long as packets are being
delivered once reordering has been detected (i.e., it only cares
the amount of packets delivered, not the ordering among them).
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A small refactoring that gets number of packets cumulatively acked
from tcp_clean_rtx_queue() directly.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the accounting of how many packets are
newly acked or sacked when the sender receives an ACK.

The current approach basically computes

   newly_acked_sacked = (prior_packets - prior_sacked) -
                        (tp->packets_out - tp->sacked_out)

   where prior_packets and prior_sacked out are snapshot
   at the beginning of the ACK processing.

The new approach tracks the delivery information via a new
TCP state variable "delivered" which monotically increases
as new packets are delivered in order or out-of-order.

The reason for this change is that the current approach is
brittle that produces negative or inaccurate estimate.

   1) For non-SACK connections, an ACK that advances the SND.UNA
   could reset the DUPACK counters (tp->sacked_out) in
   tcp_process_loss() or tcp_fastretrans_alert(). This inflates
   the inflight suddenly and causes under-estimate or even
   negative estimate. Here is a real example:

                   before   after (processing ACK)
   packets_out     75       73
   sacked_out      23        0
   ca state        Loss     Open

   The old approach computes (75-23) - (73 - 0) = -21 delivered
   while the new approach computes 1 delivered since it
   considers the 2nd-24th packets are delivered OOO.

   2) MSS change would re-count packets_out and sacked_out so
   the estimate is in-accurate and can even become negative.
   E.g., the inflight is doubled when MSS is halved.

   3) Spurious retransmission signaled by DSACK is not accounted

The new approach is simpler and more robust. For SACK connections,
tp->delivered increments as packets are being acked or sacked in
SACK and ACK processing.

For non-sack connections, it's done in tcp_remove_reno_sacks() and
tcp_add_reno_sack(). When an ACK advances the SND.UNA, tp->delivered
is incremented by the number of packets ACKed (less the current
number of DUPACKs received plus one packet hole).  Upon receiving
a DUPACK, tp->delivered is incremented assuming one out-of-order
packet is delivered.

Upon receiving a DSACK, tp->delivered is incremtened assuming one
retransmission is delivered in tcp_sacktag_write_queue().
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the cwnd is reduced and increased in various different
places. The reduction happens in various places in the recovery
state processing (tcp_fastretrans_alert) while the increase
happens afterward.

A better sequence is to identify lost packets and update
the congestion control state (icsk_ca_state) first. Then base
on the new state, up/down the cwnd in one central place. It's
more clear to reason cwnd changes.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The retransmission and F-RTO transmission currently happen inside
recovery state processing (tcp_fastretrans_alert) but before
congestion control.  This refactoring moves the logic after both
s.t. we can determine how much to send (cwnd) before deciding what to
send.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove a write-only stack variable from unix_attach_fds(). This is a
left-over from the security fix in:

    commit 712f4aad
    Author: willy tarreau <w@1wt.eu>
    Date:   Sun Jan 10 07:54:56 2016 +0100

        unix: properly account for FDs passed over unix sockets
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we acknowledge a FIN, it is not enough to ack the sequence number
and queue the skb into receive queue. We also have to call tcp_fin()
to properly update socket state and send proper poll() notifications.

It seems we also had the problem if we received a SYN packet with the
FIN flag set, but it does not seem an urgent issue, as no known
implementation can do that.

Fixes: 61d2bcae ("tcp: fastopen: accept data/FIN present in SYNACK message")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, tipc_rcv and tipc_send workqueues in server are allocated
with parameters WQ_UNBOUND & max_active = 1.
This parameters passed to this function makes it equivalent to
alloc_ordered_workqueue(). The later form is more explicit and
can inherit future ordered_workqueue changes.

In this commit we replace alloc_workqueue() with more readable
alloc_ordered_workqueue().
Acked-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, we create timers even for the subscription requests
with timeout = TIPC_WAIT_FOREVER.
This can be improved by avoiding timer creation when the timeout
is set to TIPC_WAIT_FOREVER.

In this commit, we introduce a check to creates timers only
when timeout != TIPC_WAIT_FOREVER.
Acked-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, during subscription creation the mod_time() &
tipc_subscrb_get() are called after releasing the subscriber
spin lock.

In a SMP system when performing a subscription creation, if the
subscription timeout occurs simultaneously (the timer is
scheduled to run on another CPU) then the timer thread
might decrement the subscribers refcount before the create
thread increments the refcount.

This can be simulated by creating subscription with timeout=0 and
sometimes the timeout occurs before the create request is complete.
This leads to the following message:
[30.702949] BUG: spinlock bad magic on CPU#1, kworker/u8:3/87
[30.703834] general protection fault: 0000 [#1] SMP
[30.704826] CPU: 1 PID: 87 Comm: kworker/u8:3 Not tainted 4.4.0-rc8+ #18
[30.704826] Workqueue: tipc_rcv tipc_recv_work [tipc]
[30.704826] task: ffff88003f878600 ti: ffff88003fae0000 task.ti: ffff88003fae0000
[30.704826] RIP: 0010:[<ffffffff8109196c>]  [<ffffffff8109196c>] spin_dump+0x5c/0xe0
[...]
[30.704826] Call Trace:
[30.704826]  [<ffffffff81091a16>] spin_bug+0x26/0x30
[30.704826]  [<ffffffff81091b75>] do_raw_spin_lock+0xe5/0x120
[30.704826]  [<ffffffff81684439>] _raw_spin_lock_bh+0x19/0x20
[30.704826]  [<ffffffffa0096f10>] tipc_subscrb_rcv_cb+0x1d0/0x330 [tipc]
[30.704826]  [<ffffffffa00a37b1>] tipc_receive_from_sock+0xc1/0x150 [tipc]
[30.704826]  [<ffffffffa00a31df>] tipc_recv_work+0x3f/0x80 [tipc]
[30.704826]  [<ffffffff8106a739>] process_one_work+0x149/0x3c0
[30.704826]  [<ffffffff8106aa16>] worker_thread+0x66/0x460
[30.704826]  [<ffffffff8106a9b0>] ? process_one_work+0x3c0/0x3c0
[30.704826]  [<ffffffff8106a9b0>] ? process_one_work+0x3c0/0x3c0
[30.704826]  [<ffffffff8107029d>] kthread+0xed/0x110
[30.704826]  [<ffffffff810701b0>] ? kthread_create_on_node+0x190/0x190
[30.704826]  [<ffffffff81684bdf>] ret_from_fork+0x3f/0x70

In this commit,
1. we remove the check for the return code for mod_timer()
2. we protect tipc_subscrb_get() using the subscriber spin lock.
   We increment the subscriber's refcount as soon as we add the
   subscription to subscriber's subscription list.
Acked-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, while creating a subscription the subscriber lock
protects only the subscribers subscription list and not the
nametable. The call to tipc_nametbl_subscribe() is outside
the lock. However, at subscription timeout and cancel both
the subscribers subscription list and the nametable are
protected by the subscriber lock.

This asymmetric locking mechanism leads to the following problem:
In a SMP system, the timer can be fire on another core before
the create request is complete.
When the timer thread calls tipc_nametbl_unsubscribe() before create
thread calls tipc_nametbl_subscribe(), we get a nullptr exception.

This can be simulated by creating subscription with timeout=0 and
sometimes the timeout occurs before the create request is complete.

The following is the oops:
[57.569661] BUG: unable to handle kernel NULL pointer dereference at (null)
[57.577498] IP: [<ffffffffa02135aa>] tipc_nametbl_unsubscribe+0x8a/0x120 [tipc]
[57.584820] PGD 0
[57.586834] Oops: 0002 [#1] SMP
[57.685506] CPU: 14 PID: 10077 Comm: kworker/u40:1 Tainted: P OENX 3.12.48-52.27.1.     9688.1.PTF-default #1
[57.703637] Workqueue: tipc_rcv tipc_recv_work [tipc]
[57.708697] task: ffff88064c7f00c0 ti: ffff880629ef4000 task.ti: ffff880629ef4000
[57.716181] RIP: 0010:[<ffffffffa02135aa>]  [<ffffffffa02135aa>] tipc_nametbl_unsubscribe+0x8a/   0x120 [tipc]
[...]
[57.812327] Call Trace:
[57.814806]  [<ffffffffa0211c77>] tipc_subscrp_delete+0x37/0x90 [tipc]
[57.821357]  [<ffffffffa0211e2f>] tipc_subscrp_timeout+0x3f/0x70 [tipc]
[57.827982]  [<ffffffff810618c1>] call_timer_fn+0x31/0x100
[57.833490]  [<ffffffff81062709>] run_timer_softirq+0x1f9/0x2b0
[57.839414]  [<ffffffff8105a795>] __do_softirq+0xe5/0x230
[57.844827]  [<ffffffff81520d1c>] call_softirq+0x1c/0x30
[57.850150]  [<ffffffff81004665>] do_softirq+0x55/0x90
[57.855285]  [<ffffffff8105aa35>] irq_exit+0x95/0xa0
[57.860290]  [<ffffffff815215b5>] smp_apic_timer_interrupt+0x45/0x60
[57.866644]  [<ffffffff8152005d>] apic_timer_interrupt+0x6d/0x80
[57.872686]  [<ffffffffa02121c5>] tipc_subscrb_rcv_cb+0x2a5/0x3f0 [tipc]
[57.879425]  [<ffffffffa021c65f>] tipc_receive_from_sock+0x9f/0x100 [tipc]
[57.886324]  [<ffffffffa021c826>] tipc_recv_work+0x26/0x60 [tipc]
[57.892463]  [<ffffffff8106fb22>] process_one_work+0x172/0x420
[57.898309]  [<ffffffff8107079a>] worker_thread+0x11a/0x3c0
[57.903871]  [<ffffffff81077114>] kthread+0xb4/0xc0
[57.908751]  [<ffffffff8151f318>] ret_from_fork+0x58/0x90

In this commit, we do the following at subscription creation:
1. set the subscription's subscriber pointer before performing
   tipc_nametbl_subscribe(), as this value is required further in
   the call chain ex: by tipc_subscrp_send_event().
2. move tipc_nametbl_subscribe() under the scope of subscriber lock
Acked-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, the subscribers endianness for a subscription
create/cancel request is determined as:
    swap = !(s->filter & (TIPC_SUB_PORTS | TIPC_SUB_SERVICE))
The checks are performed only for port/service subscriptions.

The swap calculation is incorrect if the filter in the subscription
cancellation request is set to TIPC_SUB_CANCEL (it's a malformed
cancel request, as the corresponding subscription create filter
is missing).
Thus, the check if the request is for cancellation fails and the
request is treated as a subscription create request. The
subscription creation fails as the request is illegal, which
terminates this connection.

In this commit we determine the endianness by including
TIPC_SUB_CANCEL, which will set swap correctly and the
request is processed as a cancellation request.
Acked-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In 'commit 7fe8097c ("tipc: fix nullpointer bug when subscribing
to events")', we terminate the connection if the subscription
creation fails.
In the same commit, the subscription creation result was based on
the value of subscription pointer (set in the function) instead of
the return code.

Unfortunately, the same function also handles subscription
cancellation request. For a subscription cancellation request,
the subscription pointer cannot be set. Thus the connection is
terminated during cancellation request.

In this commit, we move the subcription cancel check outside
of tipc_subscrp_create(). Hence,
- tipc_subscrp_create() will create a subscripton
- tipc_subscrb_rcv_cb() will subscribe or cancel a subscription.

Fixes: 'commit 7fe8097c ("tipc: fix nullpointer bug when subscribing to events")'
Acked-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In this commit, we split tipc_subscrp_create() into two:
1. tipc_subscrp_create() creates a subscription
2. A new function tipc_subscrp_subscribe() adds the
   subscription to the subscriber subscription list,
   activates the subscription timer and subscribes to
   the nametable updates.

In future commits, the purpose of tipc_subscrb_rcv_cb() will
be to either subscribe or cancel a subscription.

There is no functional change in this commit.
Acked-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, struct tipc_subscriber has duplicate fields for
type, upper and lower (as member of struct tipc_name_seq) at:
1. as member seq in struct tipc_subscription
2. as member seq in struct tipc_subscr, which is contained
   in struct tipc_event
The former structure contains the type, upper and lower
values in network byte order and the later contains the
intact copy of the request.
The struct tipc_subscription contains a field swap to
determine if request needs network byte order conversion.
Thus by using swap, we can convert the request when
required instead of duplicating it.

In this commit,
1. we remove the references to these elements as members of
   struct tipc_subscription and replace them with elements
   from struct tipc_subscr.
2. provide new functions to convert the user request into
   network byte order.
Acked-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, struct tipc_subscription has duplicate timeout and filter
attributes present:
1. directly as members of struct tipc_subscription
2. in struct tipc_subscr, which is contained in struct tipc_event

In this commit, we remove the references to these elements as
members of struct tipc_subscription and replace them with elements
from struct tipc_subscr.
Acked-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now, during subscription creation we set sub->timeout by
converting the timeout request value in milliseconds to jiffies.
This is followed by setting the timeout value in the timer if
sub->timeout != TIPC_WAIT_FOREVER.

For a subscription create request with a timeout value of
TIPC_WAIT_FOREVER, msecs_to_jiffies(TIPC_WAIT_FOREVER)
returns MAX_JIFFY_OFFSET (0xfffffffe). This is not equal to
TIPC_WAIT_FOREVER (0xffffffff).

In this commit, we remove this check.
Acked-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netdev_rss_key is written to once and thereafter is read by
drivers when they are initialising. The fact that it is mostly
read and not written to makes it a candidate for a __read_mostly
declaration.
Signed-off-by: NKim Jones <kim-marie.jones@intel.com>
Signed-off-by: NAlan Carey <alan.carey@intel.com>
Acked-by: NRami Rosen <rami.rosen@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we remove the SYN flag from the skbs that tcp_fastopen_add_skb()
places in socket receive queue, then we can remove the test that
tcp_recvmsg() has to perform in fast path.

All we have to do is to adjust SEQ in the slow path.

For the moment, we place an unlikely() and output a message
if we find an skb having SYN flag set.
Goal would be to get rid of the test completely.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RFC 7413 (TCP Fast Open) 4.2.2 states that the SYNACK message
MAY include data and/or FIN

This patch adds support for the client side :

If we receive a SYNACK with payload or FIN, queue the skb instead
of ignoring it.

Since we already support the same for SYN, we refactor the existing
code and reuse it. Note we need to clone the skb, so this operation
might fail under memory pressure.

Sara Dickinson pointed out FreeBSD server Fast Open implementation
was planned to generate such SYNACK in the future.

The server side might be implemented on linux later.
Reported-by: NSara Dickinson <sara@sinodun.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds an rx_nohandler stat counter, along with a sysfs statistics
node, and copies the counter out via netlink as well.

CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jiri Pirko <jiri@mellanox.com>
CC: Daniel Borkmann <daniel@iogearbox.net>
CC: Tom Herbert <tom@herbertland.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <gospo@cumulusnetworks.com>
CC: netdev@vger.kernel.org
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The netdev_stats_to_stats64 function copies the deprecated
net_device_stats format stats into rtnl_link_stats64 for legacy support
purposes, but with the BUILD_BUG_ON as it was, it wasn't possible to
extend rtnl_link_stats64 without also extending net_device_stats. Relax
the BUILD_BUG_ON to only require that rtnl_link_stats64 is larger, and
zero out all the stat counters that aren't present in net_device_stats.

CC: Eric Dumazet <edumazet@google.com>
CC: netdev@vger.kernel.org
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently link priority changes isn't handled for active links. In
this patch we resolve this by changing our priority if the peer passes
a valid priority in a state message.
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Changing certain link attributes (link tolerance and link priority)
from the TIPC management tool is supposed to automatically take
effect at both endpoints of the affected link.

Currently the media address is not instantiated for the link and is
used uninstantiated when crafting protocol messages designated for the
peer endpoint. This means that changing a link property currently
results in the property being changed on the local machine but the
protocol message designated for the peer gets lost. Resulting in
property discrepancy between the endpoints.

In this patch we resolve this by using the media address from the
link entry and using the bearer transmit function to send it. Hence,
we can now eliminate the redundant function tipc_link_prot_xmit() and
the redundant field tipc_link::media_addr.

Fixes: 2af5ae37 (tipc: clean up unused code and structures)
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Reported-by: NJason Hu <huzhijiang@gmail.com>
Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

open-mesh.org and its subdomains can only be accessed via HTTPS. HTTP-only
requests are currently redirected automatically to HTTPS but references in
the source code should be only https.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

Signed-off-by: NSimon Wunderlich <simon@open-mesh.com>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

Signed-off-by: NAntonio Quartulli <a@unstable.cc>

Signed-off-by: NAntonio Quartulli <a@unstable.cc>

Signed-off-by: NAntonio Quartulli <a@unstable.cc>

Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>