- 11 6月, 2009 1 次提交
-
-
由 Harald Welte 提交于
The e_powersaver driver for VIA's C7 CPU's needs to be marked as DANGEROUS as it configures the CPU to power states that are out of specification. According to Centaur, all systems with C7 and Nano CPU's support the ACPI p-state method. Thus, the acpi-cpufreq driver should be used instead. Signed-off-by: NHarald Welte <HaraldWelte@viatech.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 2月, 2009 1 次提交
-
-
由 Thomas Renninger 提交于
powernow-k8 driver should always try to get cpufreq info from ACPI. Otherwise it will not be able to detect the transition latency correctly which results in ondemand governor taking a wrong sampling rate which will then result in sever performance loss. Let the user not shoot himself in the foot and always compile in ACPI support for powernow-k8. This also fixes a wrong message if ACPI_PROCESSOR is compiled as a module and #ifndef CONFIG_ACPI_PROCESSOR path is chosen. Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 04 2月, 2009 1 次提交
-
-
由 Thomas Renninger 提交于
They were long enough set deprecated... Update Documentation/cpu-freq/users-guide.txt: The deprecated files listed there seen not to exist for some time anymore already. Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 09 8月, 2008 1 次提交
-
-
由 Dave Jones 提交于
This has been pretty solid, and doesn't see much change at all. Noticed by Harald Welte. Signed-off-by: NDave Jones <davej@redhat.com>
-
- 07 2月, 2008 1 次提交
-
-
由 Dave Jones 提交于
X86_ELAN already depends on X86_32 Signed-off-by: NDave Jones <davej@redhat.com>
-
- 13 11月, 2007 1 次提交
-
-
由 Sam Ravnborg 提交于
Merge the two Kconfig files to a single file. Checked using make allmodconfig for x86_64. No changes in build. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Dave Jones <davej@codemonkey.org.uk>
-
- 20 10月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
Move the 64bit Kconfig file to arch/x86/kernel/cpu/cpufreq, so we can unify them. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 11 10月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 27 7月, 2007 1 次提交
-
-
由 Adrian Bunk 提交于
This patch fixes the following compile error introduced by commit e8666b27 and reported by Alexey Dobriyan: <-- snip --> CC arch/i386/kernel/acpi/cstate.o In file included from arch/i386/kernel/acpi/cstate.c:17: include/acpi/processor.h:88: error: expected specifier-qualifier-list before 'acpi_integer' <-- snip --> If you select something you must ensure that the dependencies of what you are selecting are fulfilled. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Joshua Hoblitt <jhoblitt@ifa.hawaii.edu> Cc: Dave Jones <davej@redhat.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 7月, 2007 1 次提交
-
-
由 Adrian Bunk 提交于
This patch contains the overdue removal of X86_SPEEDSTEP_CENTRINO_ACPI. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 07 6月, 2007 1 次提交
-
-
由 Joshua Hoblitt 提交于
powernow-k8 really needs to use ACPI to function on SMP systems. The current Kconfig allows us to build kernels which fail mysteriously for some users due to us trying to automatically enable this, and getting it wrong. It's easier to just present this as an option to the user. Signed-off-by: NJoshua Hoblitt <jhoblitt@ifa.hawaii.edu> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 21 2月, 2007 1 次提交
-
-
由 Thomas Renninger 提交于
Revert default on deprecated config X86_SPEEDSTEP_CENTRINO_ACPI Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NDave Jones <davej@redhat.com> arch/i386/kernel/cpu/cpufreq/Kconfig | 1 - arch/x86_64/kernel/cpufreq/Kconfig | 1 - 2 files changed, 2 deletions(-)
-
- 11 2月, 2007 1 次提交
-
-
由 Rafa Bilski 提交于
This is driver for Enhanced Powersaver which is present in VIA C7 processors. Beta tested by Jorgen (jorgen (at) greven dot dk). Thanks! Based on documentation provided by Dave Jones (Thanks!) and C7 Eden datasheet available from www.via.com.tw. Looks like all these C7 Eden CPU's don't have P-states in BIOS. I know that 2 p-states is low, but Jorgen finds it usefull anyway because board is passive cooled. There are 3 different types of C7 processors (called brands): 0. C7-M - these processors can set any maultiplier between min and max, any voltage between min and max. 1. C7 - only min and max states are supported. Voltage is different for min and max states. 2. Eden - only min and max states are supported. Looks like this brand can only change multiplier. Voltage seems to be the same for min and max frequency. Signed-off-by: NRafal Bilski <rafalbilski@interia.pl> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 16 10月, 2006 1 次提交
-
-
由 Venkatesh Pallipadi 提交于
Mark ACPI hooks in speedstep-centrino as deprecated. Change the order in which speedstep-centrino and acpi-cpufreq (when both are in kernel) will be added. First driver to be tried is now acpi-cpufreq, followed by speedstep-centrino. Add a note in feature-removal-schedule to mark this deprecation. Signed-off-by: NDenis Sadykov <denis.m.sadykov@intel.com> Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAlexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 01 8月, 2006 2 次提交
-
-
由 Adrian Bunk 提交于
It seems commit 32ee8c3e accidentially reverted cdc9cc1d, IOW, it reintroduced the following compile error with CONFIG_PCI=n: <-- snip --> ... CC arch/i386/kernel/cpu/cpufreq/gx-suspmod.o arch/i386/kernel/cpu/cpufreq/gx-suspmod.c: In function ‘gx_detect_chipset’: arch/i386/kernel/cpu/cpufreq/gx-suspmod.c:193: error: implicit declaration of function ‘pci_match_id’ arch/i386/kernel/cpu/cpufreq/gx-suspmod.c:193: warning: comparison between pointer and integer make[3]: *** [arch/i386/kernel/cpu/cpufreq/gx-suspmod.o] Error 1 <-- snip --> This patch therefore re-adds the dependency of X86_GX_SUSPMOD on PCI. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Rafa Bilski 提交于
Minimal change necessary for hardware support. Changes in longhaul.c: - most important - now C3 state is causing transition, - code responsible for clearing "bus master" bit removed, - protect bcr2 transition in the same way as longhaul. Signed-off-by: NRafa³ Bilski <rafalbilski@interia.pl> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 12 3月, 2006 2 次提交
-
-
由 Dave Jones 提交于
Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Dave Jones 提交于
This seems to work for a short period of time, but when used in conjunction with a userspace governor that changes the frequency regularly, it's only a matter of time before everything just locks up. Signed-off-by: NDave Jones <davej@redhat.com>
-
- 28 2月, 2006 1 次提交
-
-
由 Dave Jones 提交于
Signed-off-by: NDave Jones <davej@redhat.com>
-
- 20 1月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
This patch fixes the following compile error: ... CC arch/i386/kernel/cpu/cpufreq/gx-suspmod.o arch/i386/kernel/cpu/cpufreq/gx-suspmod.c: In function 'gx_detect_chipset': arch/i386/kernel/cpu/cpufreq/gx-suspmod.c:193: error: implicit declaration of function 'pci_match_id' arch/i386/kernel/cpu/cpufreq/gx-suspmod.c:193: warning: comparison between pointer and integer make[3]: *** [arch/i386/kernel/cpu/cpufreq/gx-suspmod.o] Error 1 <-- snip --> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 01 6月, 2005 1 次提交
-
-
由 Dave Jones 提交于
From: Sean Young <sean@mess.org> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-