- 08 4月, 2013 26 次提交
-
-
由 Guenter Roeck 提交于
VID is not always enabled (NCT6775, NCT6776) or supported (NCT6779). Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
Scan all temperature sources used for fan control and report if additional monitoring registers are available. Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
The NCT677X series support weighted fan control. In this mode, a secondary temperature source is used in addition to the primary temperature source to control fan speed. Add support for this feature. Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
If set, fan debounce is enabled when loading the driver. Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
This driver will replace the w83627ehf driver for NCT6775F and NCT6776F, and provides support for NCT6779D. This patch provides support for voltage monitor attributes. Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
Fix: ERROR: Macros with complex values should be enclosed in parenthesis when it is seen due to complex code and not due to multi-line variable declarations. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Alistair John Strachan <alistair@devzero.co.uk> Acked-by: NAlistair John Strachan <alistair@devzero.co.uk> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
Cc: Hans de Goede <hdegoede@redhat.com> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Henrik Rydberg <rydberg@euromail.se> Acked-by: NAlistair John Strachan <alistair@devzero.co.uk> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Naveen Krishna Chatradhi 提交于
This patch adds DT support to NTC driver to parse the platform data. Also adds the support to work as an iio device client. During the probe ntc driver gets the respective channels of ADC and uses iio_raw_read calls to get the ADC converted value. Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com> [Guenter Roeck: fixed Kconfig dependencies; use ERR_CAST] Tested-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Lars-Peter Clausen 提交于
This allows an userspace application to poll() on the alarm files to get notified in case of a temperature threshold event. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Reviewed-by: NHartmut Knaack <knaack.h@gmx.de> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Lars-Peter Clausen 提交于
The adt7310/adt7320 is the SPI version of the adt7410/adt7420. The register map layout is a bit different, i.e. the register addresses differ between the two variants, but the bit layouts of the individual registers are identical. So both chip variants can easily be supported by the same driver. The issue of non matching register address layouts is solved by a simple look-up table which translates the I2C addresses to the SPI addresses. The patch moves the bulk of the adt7410 driver to a common module that will be shared by the adt7410 and adt7310 drivers. This common module implements the driver logic and uses a set of virtual functions to perform IO access. The adt7410 and adt7310 driver modules provide proper implementations of these IO accessor functions for I2C respective SPI. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Reviewed-by: NHartmut Knaack <knaack.h@gmx.de> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Lars-Peter Clausen 提交于
Currently each time the temperature register is read the driver also reads the threshold and hysteresis registers. This increases the amount of I2C traffic and time needed to read the temperature by a factor of ~5. Neither the threshold nor the hysteresis change on their own, so once we have read them, we should be able to just use the cached value of the registers. This patch modifies the code accordingly and only reads the threshold and hysteresis registers once during probe. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Jingoo Han 提交于
This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fix from Gleb Natapov: "Bugfix for the regression introduced by commit c300aa64" * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Allow cross page reads and writes from cached translations.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Peter Anvin: "Two quite small fixes: one a build problem, and the other fixes seccomp filters on x32." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix rebuild with EFI_STUB enabled x86: remove the x32 syscall bitmask from syscall_get_nr()
-
由 Will Deacon 提交于
Interrupt handlers are always invoked with interrupts disabled, so remove all uses of the deprecated IRQF_DISABLED flag. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by: NMatt Turner <mattst88@gmail.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Will Deacon 提交于
Linux has expected that interrupt handlers are executed with local interrupts disabled for a while now, so ensure that this is the case on Alpha even for non-device interrupts such as IPIs. Without this patch, secondary boot results in the following backtrace: warning: at kernel/softirq.c:139 __local_bh_enable+0xb8/0xd0() trace: __local_bh_enable+0xb8/0xd0 irq_enter+0x74/0xa0 scheduler_ipi+0x50/0x100 handle_ipi+0x84/0x260 do_entint+0x1ac/0x2e0 irq_exit+0x60/0xa0 handle_irq+0x98/0x100 do_entint+0x2c8/0x2e0 ret_from_sys_call+0x0/0x10 load_balance+0x3e4/0x870 cpu_idle+0x24/0x80 rcu_eqs_enter_common.isra.38+0x0/0x120 cpu_idle+0x40/0x80 rest_init+0xc0/0xe0 _stext+0x1c/0x20 A similar dump occurs if you try to reboot using magic-sysrq. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Reviewed-by: NMatt Turner <mattst88@gmail.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Will Deacon 提交于
Due to all of the goodness being packed into today's kernels, the resulting image isn't as slim as it once was. In light of this, don't pass -msmall-data to gcc, which otherwise results in link failures due to impossible relocations when compiling anything but the most trivial configurations. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by: NMatt Turner <mattst88@gmail.com> Tested-by: NThorsten Kranzkowski <dl8bcu@dl8bcu.de> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jay Estabrook 提交于
Fixes a NULL pointer dereference at boot on UP1500. Cc: stable@vger.kernel.org Reviewed-and-Tested-by: NMatt Turner <mattst88@gmail.com> Signed-off-by: NJay Estabrook <jay.estabrook@gmail.com> Signed-off-by: NMatt Turner <mattst88@gmail.com> Signed-off-by: NMichael Cree <mcree@orcon.net.nz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 4月, 2013 1 次提交
-
-
由 Andrew Honig 提交于
This patch adds support for kvm_gfn_to_hva_cache_init functions for reads and writes that will cross a page. If the range falls within the same memslot, then this will be a fast operation. If the range is split between two memslots, then the slower kvm_read_guest and kvm_write_guest are used. Tested: Test against kvm_clock unit tests. Signed-off-by: NAndrew Honig <ahonig@google.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
- 06 4月, 2013 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm由 Linus Torvalds 提交于
Pull device-mapper fixes from Alasdair Kergon: "A pair of patches to fix the writethrough mode of the device-mapper cache target when the device being cached is not itself wrapped with device-mapper." * tag 'dm-3.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm cache: reduce bio front_pad size in writeback mode dm cache: fix writes to cache device in writethrough mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: "PCI updates for v3.9: ASPM Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" kexec PCI: Don't try to disable Bus Master on disconnected PCI devices Platform ROM images PCI: Add PCI ROM helper for platform-provided ROM images nouveau: Attempt to use platform-provided ROM image radeon: Attempt to use platform-provided ROM image Hotplug PCI/ACPI: Always resume devices on ACPI wakeup notifications PCI/PM: Disable runtime PM of PCIe ports EISA EISA/PCI: Fix bus res reference EISA/PCI: Init EISA early, before PNP" * tag 'pci-v3.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PM: Disable runtime PM of PCIe ports PCI/ACPI: Always resume devices on ACPI wakeup notifications PCI: Don't try to disable Bus Master on disconnected PCI devices Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" radeon: Attempt to use platform-provided ROM image nouveau: Attempt to use platform-provided ROM image EISA/PCI: Init EISA early, before PNP EISA/PCI: Fix bus res reference PCI: Add PCI ROM helper for platform-provided ROM images
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix erroneous sock_orphan() leading to crashes and double kfree_skb() in NFC protocol. From Thierry Escande and Samuel Ortiz. 2) Fix use after free in remain-on-channel mac80211 code, from Johannes Berg. 3) nf_reset() needs to reset the NF tracing cookie, otherwise we can leak it from one namespace into another. Fix from Gao Feng and Patrick McHardy. 4) Fix overflow in channel scanning array of mwifiex driver, from Stone Piao. 5) Fix loss of link after suspend/shutdown in r8169, from Hayes Wang. 6) Synchronization of unicast address lists to the undelying device doesn't work because whether to sync is maintained as a boolean rather than a true count. Fix from Vlad Yasevich. 7) Fix corruption of TSO packets in atl1e by limiting the segmented packet length. From Hannes Frederic Sowa. 8) Revert bogus AF_UNIX credential passing change and fix the coalescing issue properly, from Eric W Biederman. 9) Changes of ipv4 address lifetime settings needs to generate a notification, from Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) netfilter: don't reset nf_trace in nf_reset() net: ipv4: notify when address lifetime changes ixgbe: fix registration order of driver and DCA nofitication af_unix: If we don't care about credentials coallesce all messages Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL" bonding: remove sysfs before removing devices atl1e: limit gso segment size to prevent generation of wrong ip length fields net: count hw_addr syncs so that unsync works properly. r8169: fix auto speed down issue netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths mwifiex: limit channel number not to overflow memory NFC: microread: Fix build failure due to a new MEI bus API iwlwifi: dvm: fix the passive-no-RX workaround netfilter: nf_conntrack: fix error return code NFC: llcp: Keep the connected socket parent pointer alive mac80211: fix idle handling sequence netfilter: nfnetlink_acct: return -EINVAL if object name is empty netfilter: nfnetlink_queue: fix error return code in nfnetlink_queue_init() netfilter: reset nf_trace in nf_reset mac80211: fix remain-on-channel cancel crash ...
-
由 Jan Beulich 提交于
eboot.o and efi_stub_$(BITS).o didn't get added to "targets", and hence their .cmd files don't get included by the build machinery, leading to the files always getting rebuilt. Rather than adding the two files individually, take the opportunity and add $(VMLINUX_OBJS) to "targets" instead, thus allowing the assignment at the top of the file to be shrunk quite a bit. At the same time, remove a pointless flags override line - the variable assigned to was misspelled anyway, and the options added are meaningless for assembly sources. [ hpa: the patch is not minimal, but I am taking it for -urgent anyway since the excess impact of the patch seems to be small enough. ] Signed-off-by: NJan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/515C5D2502000078000CA6AD@nat28.tlf.novell.com Cc: Matthew Garrett <mjg@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Patrick McHardy 提交于
Commit 130549fe ("netfilter: reset nf_trace in nf_reset") added code to reset nf_trace in nf_reset(). This is wrong and unnecessary. nf_reset() is used in the following cases: - when passing packets up the the socket layer, at which point we want to release all netfilter references that might keep modules pinned while the packet is queued. nf_trace doesn't matter anymore at this point. - when encapsulating or decapsulating IPsec packets. We want to continue tracing these packets after IPsec processing. - when passing packets through virtual network devices. Only devices on that encapsulate in IPv4/v6 matter since otherwise nf_trace is not used anymore. Its not entirely clear whether those packets should be traced after that, however we've always done that. - when passing packets through virtual network devices that make the packet cross network namespace boundaries. This is the only cases where we clearly want to reset nf_trace and is also what the original patch intended to fix. Add a new function nf_reset_trace() and use it in dev_forward_skb() to fix this properly. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "Fixes for a number of small glitches in various corners of the MIPS tree. No particular areas is standing out. With this applied all MIPS defconfigs are building fine. No merge conflicts are expected." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Delete definition of SA_RESTORER. MIPS: Fix ISA level which causes secondary cache init bypassing and more MIPS: Fix build error cavium-octeon without CONFIG_SMP MIPS: Kconfig: Rename SNIPROM too MIPS: Alchemy: Fix typo "CONFIG_DEBUG_PCI" MIPS: Unbreak function tracer for 64-bit kernel.
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes由 Linus Torvalds 提交于
Pull GFS2 fixes from Steven Whitehouse: "There are two patches which fix up a couple of minor issues in the DLM interface code, a missing error path in gfs2_rs_alloc(), one patch which fixes a problem during "withdraw" and a fix for discards/FITRIM when using 4k sector sized devices." * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Issue discards in 512b sectors GFS2: Fix unlock of fcntl locks during withdrawn state GFS2: return error if malloc failed in gfs2_rs_alloc() GFS2: use memchr_inv GFS2: use kmalloc for lvb bitmap
-
由 Mike Marciniszyn 提交于
Commit e2eed58b ("IB/qib: change QLogic to Intel") moved a firmware file potentially breaking the ABI. This patch reverts that aspect of the fix as well as reverting the firmware name as used in qib. Reported-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc由 Linus Torvalds 提交于
Pull spi fixes from Mark Brown: "A bunch of small driver fixes plus a fix for error handling in the core - nothing too exciting overall." * tag 'spi-fix-v3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts spi: Unlock a spinlock before calling into the controller driver. spi/s3c64xx: modified error interrupt handling and init spi/bcm63xx: don't disable non enabled clocks in probe error path spi/bcm63xx: Remove unused variable spi: slink-tegra20: move runtime pm calls to transfer_one_message
-
由 Bob Peterson 提交于
This patch changes GFS2's discard issuing code so that it calls function sb_issue_discard rather than blkdev_issue_discard. The code was calling blkdev_issue_discard and specifying the correct sector offset and sector size, but blkdev_issue_discard expects these values to be in terms of 512 byte sectors, even if the native sector size for the device is different. Calling sb_issue_discard with the BLOCK size instead ensures the correct block-to-512b-sector translation. I verified that "minlen" is specified in blocks, so comparing it to a number of blocks is correct. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Johan Hovold 提交于
This reverts commit 0ef1594c. This patch introduced a few races which cannot be easily fixed with a small follow-up patch. Furthermore, the SoC with the broken hardware register, which this patch intended to add support for, can only be used with device trees, which this driver currently does not support. [ Here is the discussion that led to this "revert" patch: https://lkml.org/lkml/2013/4/3/176 ] Cc: stable <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://gitorious.org/linux-omap-dss2/linux由 Linus Torvalds 提交于
Pull fbdev fixes from Tomi Valkeinen: "Fix uvesafb crash bug and typoed flag name in fbmon's new videomode code" * tag 'fbdev-fixes-3.9-rc6' of git://gitorious.org/linux-omap-dss2/linux: video:uvesafb: Fix dereference NULL pointer code path fbmon: use VESA_DMT_VSYNC_HIGH to fix typo
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "This contains slightly more volumes than usual at this stage, mostly because of my vacation in the last week. Nothing to scare, all small and/or trivial fixes: - Fix loop path handling in ASoC DAPM - Some memory handling fixes in ASoC core - Fix spear_pcm to adapt to the updated API - HD-audio HDMI ELD handling fixes - Fix for CM6331 USB-audio SRC change bugs - Revert power_save_controller option change due to user-space usage - A few other small ASoC and HD-audio fixes" * tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/generic - fix uninitialized variable Revert "ALSA: hda - Allow power_save_controller option override DCAPS" ALSA: hda - fix typo in proc output ALSA: hda - Enabling Realtek ALC 671 codec ALSA: usb: Work around CM6631 sample rate change bug ALSA: hda - bug fix on HDMI ELD debug message ALSA: hda - bug fix on return value when getting HDMI ELD info ASoC: dma-sh7760: Fix compile error ASoC: core: fix invalid free of devm_ allocated data ASoC: spear_pcm: Update to new pcm_new() API ASoC:: max98090: Remove executable bit ASoC: dapm: Fix pointer dereference in is_connected_output_ep() ASoC: pcm030 audio fabric: remove __init from probe ASoC: imx-ssi: Fix occasional AC97 reset failure ASoC: core: fix possible memory leak in snd_soc_bytes_put() ASoC: wm_adsp: fix possible memory leak in wm_adsp_load_coeff() ASoC: dapm: Fix handling of loops ASoC: si476x: Add missing break for SNDRV_PCM_FORMAT_S8 switch case
-