Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 10 8月, 2009 3 次提交
  3. 08 8月, 2009 1 次提交
  5. 06 8月, 2009 12 次提交
  7. 26 7月, 2009 1 次提交
  9. 25 7月, 2009 8 次提交
    • P
      OMAP3 clock: correct module IDLEST bits: SSI; DSS; USBHOST; HSOTGUSB · 3c82e229
      由 Paul Walmsley 提交于 
      Fix two bugs in the OMAP3 clock tree pertaining to the SSI, DSS,
USBHOST, and HSOTGUSB devices.  These devices are both interconnect
initiators and targets.  Without this patch, clk_enable()s on clocks for
these modules can be very high latency (potentially up to ~200
milliseconds) and message such as the following are generated:

    Clock usbhost_48m_fck didn't enable in 100000 tries

Two bugs are fixed by this patch.  First, OMAP hardware only supports
target CM_IDLEST register bits on ES2+ chips and beyond.  ES1 chips
should not wait for these clocks to enable.  So, split the appropriate
clocks into ES1 and ES2+ variants, so that kernels running on ES1
devices won't try to wait.

Second, the current heuristic in omap2_clk_dflt_find_idlest() will
fail for these clocks.  It assumes that the CM_IDLEST bit to wait upon
is the same as the CM_*CLKEN bit, which is false[1].  Fix by
implementing custom clkops .find_idlest function pointers for the
appropriate clocks that return the correct slave IDLEST bit shift.

This was originally fixed in the linux-omap kernel during 2.6.29 in a
slightly different manner[2][3].

In the medium-term future, all of the module IDLEST code will
eventually be moved to the omap_hwmod code.

Problem reported by Jarkko Nikula <jhnikula@gmail.com>:

    http://marc.info/?l=linux-omap&m=124306184903679&w=2

...

1. See for example 34xx TRM Revision P Table 4-213 and 4-217 (for the
   DSS case).

2. http://www.spinics.net/lists/linux-omap/msg05512.html et seq.

3. http://lkml.indiana.edu/hypermail/linux/kernel/0901.3/01498.htmlSigned-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Jarkko Nikula <jhnikula@gmail.com>
      3c82e229
    • P
      OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register · 3dc21975
      由 Paul Walmsley 提交于 
      OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the CM_*CLKEN bits
are in CM_{I,F}CLKEN2_CORE [1].  Fix by implementing a custom clkops
.find_idlest function to return the correct slave IDLEST register.

...

1. OMAP2430 Multimedia Device Package-on-Package (POP) Silicon Revision 2.1
   (Rev. V) Technical Reference Manual, tables 4-99 and 4-105.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      3dc21975
    • P
      OMAP2/3 clock: split, rename omap2_wait_clock_ready() · 72350b29
      由 Paul Walmsley 提交于 
      Some OMAP2/3 hardware modules have CM_IDLEST attributes that are not
handled by the current omap2_wait_clock_ready() code.  In preparation
for patches that fix the unusual devices, rename the function
omap2_wait_clock_ready() to omap2_wait_module_ready() and split it
into three parts:

1. A clkops-specific companion clock return function (by default,
   omap2_clk_dflt_find_companion())

2. A clkops-specific CM_IDLEST register address and bit shift return
   function (by default, omap2_clk_dflt_find_idlest())

3. Code to wait for the CM to indicate that the module is ready
   (omap2_cm_wait_idlest())

Clocks can now specify their own custom find_companion() and find_idlest()
functions; used in subsequent patches.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      72350b29
    • R
      OMAP3 SDRC: Move the clk stabilization delay to the right place · df56556e
      由 Rajendra Nayak 提交于 
      The clock stabilization delay post a M2 divider change is needed
even before a SDRC interface clock re-enable and not only before
jumping back to SDRAM.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      df56556e
    • R
      OMAP3 SDRC: Fix freeze when scaling CORE dpll to < 83Mhz · 8ff120e5
      由 Rajendra Nayak 提交于 
      This patch fixes a bug in the CORE dpll scaling sequence which was
errouneously clearing some bits in the SDRC DLLA CTRL register and
hence causing a freeze.  The issue was observed only on platforms
which scale CORE dpll to < 83Mhz and hence program the DLL in fixed
delay mode.

Issue reported by Limei Wang <E12499@motorola.com>, with debugging
assistance from Richard Woodruff <r-woodruff2@ti.com> and Girish
Ghongdemath <girishsg@ti.com>.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Cc: Limei Wang <E12499@motorola.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Girish Ghongdemath <girishsg@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
[paul@pwsan.com: updated patch description to include collaboration credits]
      8ff120e5
    • P
      OMAP2/3 SDRC: don't set SDRC_POWER.PWDENA on boot · 75f251e3
      由 Paul Walmsley 提交于 
      Stop setting SDRC_POWER.PWDENA on boot.  There is a nasty erratum
(34xx erratum 1.150) that can cause memory corruption if PWDENA is
enabled.

Based originally on a patch from Samu P. Onkalo <samu.p.onkalo@nokia.com>.

Tested on BeagleBoard rev C2.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Samu P. Onkalo <samu.p.onkalo@nokia.com>
      75f251e3
    • J
      OMAP3: Setup MUX settings for SDRC CKE signals · 9fb97412
      由 Jean Pihet 提交于 
      This patches ensures the MUX settings are correct for the SDRC
CKE signals to SDRAM. This allows the self-refresh to work when
2 chip-selects are in use.

A warning is thrown away in case the initial muxing is incorrect,
in order to track faulty or old-dated bootloaders.
Note: The CONFIG_OMAP_MUX and CONFIG_OMAP_MUX_WARNINGS options
must be enabled for the mux code to have effect.
Signed-off-by: NJean Pihet <jpihet@mvista.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      9fb97412
    • J
      OMAP3 SDRC: add support for 2 SDRAM chip selects · 58cda884
      由 Jean Pihet 提交于 
      Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2
SDRAM parts connected to the SDRC.

This patch adds the following:
- add a new argument of type omap_sdrc_params struct*
to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params
- adapted the OMAP boards files to the new prototype of
omap2_init_common_hw
- add the SDRC 2nd CS registers offsets defines
- adapt the sram sleep code to configure the SDRC for the 2nd CS

Note: If the 2nd param to omap2_init_common_hw is NULL, then the
parameters are not programmed into the SDRC CS1 registers

Tested on 3430 SDP and Beagleboard rev C2 and B5, with
suspend/resume and frequency changes (cpufreq).
Signed-off-by: NJean Pihet <jpihet@mvista.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      58cda884
  11. 23 6月, 2009 5 次提交
  13. 20 6月, 2009 9 次提交
  15. 09 6月, 2009 1 次提交