- 22 7月, 2011 11 次提交
-
-
由 Lin Ming 提交于
No need to define a new "cfs_rq" variable in the "for" block. Just use the one at the top of the function. Signed-off-by: NLin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1311297271.3938.1352.camel@minggr.sh.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephan Baerwolf 提交于
"entity_key()" is only used in "__enqueue_entity()" and its only function is to subtract a tasks vruntime by its groups minvruntime. Before this patch a rbtree enqueue-decision is done by comparing two tasks in the style: "if (entity_key(cfs_rq, se) < entity_key(cfs_rq, entry))" which would be "if (se->vruntime-cfs_rq->min_vruntime < entry->vruntime-cfs_rq->min_vruntime)" or (if reducing cfs_rq->min_vruntime out) "if (se->vruntime < entry->vruntime)" which is "if (entity_before(se, entry))" So we do not need "entity_key()". If "entity_before()" is inline we will also save one subtraction (only one, because "entity_key(cfs_rq, se)" was cached in "key") Signed-off-by: NStephan Baerwolf <stephan.baerwolf@tu-ilmenau.de> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-ns12mnd2h5w8rb9agd8hnsfk@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan H. Schönherr 提交于
Clean up cfs/rt runqueue initialization by moving group scheduling related code into the corresponding functions. Also, keep group scheduling as an add-on, so that things are only done additionally, i. e. remove the init_*_rq() calls from init_tg_*_entry(). (This removes a redundant initalization during sched_init()). In case of group scheduling rt_rq->highest_prio.curr is now initialized twice, but adding another #ifdef seems not worth it. Signed-off-by: NJan H. Schönherr <schnhrr@cs.tu-berlin.de> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1310661163-16606-1-git-send-email-schnhrr@cs.tu-berlin.deSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Richard Kennedy 提交于
Reorder root_domain to remove 8 bytes of alignment padding on 64 bit builds, this shrinks the size from 1736 to 1728 bytes, therefore using one fewer cachelines. Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1310726492.1977.5.camel@castor.rskSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Bianca Lutz 提交于
If a task group is to be created and alloc_fair_sched_group() fails, then the rt_bandwidth of the corresponding task group is not yet initialized. The caller, sched_create_group(), starts a clean up procedure which calls free_rt_sched_group() which unconditionally destroys the not yet initialized rt_bandwidth. This crashes or hangs the system in lock_hrtimer_base(): UP systems dereference a NULL pointer, while SMP systems loop endlessly on a condition that cannot become true. This patch simply avoids the destruction of rt_bandwidth when the initialization code path was not reached. (This was discovered by accident with a custom kernel modification.) Signed-off-by: NBianca Lutz <sowilo@cs.tu-berlin.de> Signed-off-by: NJan Schoenherr <schnhrr@cs.tu-berlin.de> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1310580816-10861-7-git-send-email-schnhrr@cs.tu-berlin.deSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Schoenherr 提交于
The last reference to cpu_cfs_rq() was removed with commit 88ec22d3 ("sched: Remove the cfs_rq dependency from set_task_cpu()"). Thus, remove this function, too. Signed-off-by: NJan Schoenherr <schnhrr@cs.tu-berlin.de> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1310580816-10861-3-git-send-email-schnhrr@cs.tu-berlin.deSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Schoenherr 提交于
This patch fixes a typo located in a comment. Signed-off-by: NJan Schoenherr <schnhrr@cs.tu-berlin.de> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1310580816-10861-2-git-send-email-schnhrr@cs.tu-berlin.deSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Use for_each_leaf_cfs_rq() instead of list_for_each_entry_rcu(), this achieves that load_balance_fair() only iterates those task_groups that actually have tasks on busiest, and that we iterate bottom-up, trying to move light groups before the heavier ones. No idea if it will actually work out to be beneficial in practice, does anybody have a cgroup workload that might show a difference one way or the other? [ Also move update_h_load to sched_fair.c, loosing #ifdef-ery ] Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: NPaul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/1310557009.2586.28.camel@twinsSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Paul Turner 提交于
In dequeue_task_fair() we bail on dequeue when we encounter a parenting entity with additional weight. However, we perform a double shares update on this entity as we continue the shares update traversal from this point, despite dequeue_entity() having already updated its queuing cfs_rq. Avoid this by starting from the parent when we resume. Signed-off-by: NPaul Turner <pjt@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110707053059.797714697@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Paul Turner 提交于
While looking at check_preempt_wakeup() I realized that we are potentially updating the wrong entity in the fair-group scheduling case. In this case the current task's cfs_rq may not be the same as the one used for the comparison between the waking task and the existing task's vruntime. This potentially results in us using a stale vruntime in the pre-emption decision, providing a small false preference for the previous task. The effects of this are bounded since we always perform a hierarchal update on the tick. Signed-off-by: NPaul Turner <pjt@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/CAPM31R+2Ke2urUZKao5W92_LupdR4AYEv-EZWiJ3tG=tEes2cw@mail.gmail.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Merge reason: pick up the latest scheduler fixes. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 7月, 2011 11 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: signal: align __lock_task_sighand() irq disabling and RCU softirq,rcu: Inform RCU of irq_exit() activity sched: Add irq_{enter,exit}() to scheduler_ipi() rcu: protect __rcu_read_unlock() against scheduler-using irq handlers rcu: Streamline code produced by __rcu_read_unlock() rcu: Fix RCU_BOOST race handling current->rcu_read_unlock_special rcu: decrease rcu_report_exp_rnp coupling with scheduler
-
由 Linus Torvalds 提交于
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Avoid creating superfluous NUMA domains on non-NUMA systems sched: Allow for overlapping sched_domain spans sched: Break out cpu_power from the sched_group structure
-
由 Linus Torvalds 提交于
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86. reboot: Make Dell Latitude E6320 use reboot=pci x86, doc only: Correct real-mode kernel header offset for init_size x86: Disable AMD_NUMA for 32bit for now
-
由 Ingo Molnar 提交于
Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu into core/urgent
-
由 Paul E. McKenney 提交于
The __lock_task_sighand() function calls rcu_read_lock() with interrupts and preemption enabled, but later calls rcu_read_unlock() with interrupts disabled. It is therefore possible that this RCU read-side critical section will be preempted and later RCU priority boosted, which means that rcu_read_unlock() will call rt_mutex_unlock() in order to deboost itself, but with interrupts disabled. This results in lockdep splats, so this commit nests the RCU read-side critical section within the interrupt-disabled region of code. This prevents the RCU read-side critical section from being preempted, and thus prevents the attempt to deboost with interrupts disabled. It is quite possible that a better long-term fix is to make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's ->wait_lock. Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Peter Zijlstra 提交于
The rcu_read_unlock_special() function relies on in_irq() to exclude scheduler activity from interrupt level. This fails because exit_irq() can invoke the scheduler after clearing the preempt_count() bits that in_irq() uses to determine that it is at interrupt level. This situation can result in failures as follows: $task IRQ SoftIRQ rcu_read_lock() /* do stuff */ <preempt> |= UNLOCK_BLOCKED rcu_read_unlock() --t->rcu_read_lock_nesting irq_enter(); /* do stuff, don't use RCU */ irq_exit(); sub_preempt_count(IRQ_EXIT_OFFSET); invoke_softirq() ttwu(); spin_lock_irq(&pi->lock) rcu_read_lock(); /* do stuff */ rcu_read_unlock(); rcu_read_unlock_special() rcu_report_exp_rnp() ttwu() spin_lock_irq(&pi->lock) /* deadlock */ rcu_read_unlock_special(t); Ed can simply trigger this 'easy' because invoke_softirq() immediately does a ttwu() of ksoftirqd/# instead of doing the in-place softirq stuff first, but even without that the above happens. Cure this by also excluding softirqs from the rcu_read_unlock_special() handler and ensuring the force_irqthreads ksoftirqd/# wakeup is done from full softirq context. [ Alternatively, delaying the ->rcu_read_lock_nesting decrement until after the special handling would make the thing more robust in the face of interrupts as well. And there is a separate patch for that. ] Cc: Thomas Gleixner <tglx@linutronix.de> Reported-and-tested-by: NEd Tomlinson <edt@aei.ca> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Peter Zijlstra 提交于
Ensure scheduler_ipi() calls irq_{enter,exit} when it does some actual work. Traditionally we never did any actual work from the resched IPI and all magic happened in the return from interrupt path. Now that we do do some work, we need to ensure irq_{enter,exit} are called so that we don't confuse things. This affects things like timekeeping, NO_HZ and RCU, basically everything with a hook in irq_enter/exit. Explicit examples of things going wrong are: sched_clock_cpu() -- has a callback when leaving NO_HZ state to take a new reading from GTOD and TSC. Without this callback, time is stuck in the past. RCU -- needs in_irq() to work in order to avoid some nasty deadlocks Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Paul E. McKenney 提交于
The addition of RCU read-side critical sections within runqueue and priority-inheritance lock critical sections introduced some deadlock cycles, for example, involving interrupts from __rcu_read_unlock() where the interrupt handlers call wake_up(). This situation can cause the instance of __rcu_read_unlock() invoked from interrupt to do some of the processing that would otherwise have been carried out by the task-level instance of __rcu_read_unlock(). When the interrupt-level instance of __rcu_read_unlock() is called with a scheduler lock held from interrupt-entry/exit situations where in_irq() returns false, deadlock can result. This commit resolves these deadlocks by using negative values of the per-task ->rcu_read_lock_nesting counter to indicate that an instance of __rcu_read_unlock() is in flight, which in turn prevents instances from interrupt handlers from doing any special processing. This patch is inspired by Steven Rostedt's earlier patch that similarly made __rcu_read_unlock() guard against interrupt-mediated recursion (see https://lkml.org/lkml/2011/7/15/326), but this commit refines Steven's approach to avoid the need for preemption disabling on the __rcu_read_unlock() fastpath and to also avoid the need for manipulating a separate per-CPU variable. This patch avoids need for preempt_disable() by instead using negative values of the per-task ->rcu_read_lock_nesting counter. Note that nested rcu_read_lock()/rcu_read_unlock() pairs are still permitted, but they will never see ->rcu_read_lock_nesting go to zero, and will therefore never invoke rcu_read_unlock_special(), thus preventing them from seeing the RCU_READ_UNLOCK_BLOCKED bit should it be set in ->rcu_read_unlock_special. This patch also adds a check for ->rcu_read_unlock_special being negative in rcu_check_callbacks(), thus preventing the RCU_READ_UNLOCK_NEED_QS bit from being set should a scheduling-clock interrupt occur while __rcu_read_unlock() is exiting from an outermost RCU read-side critical section. Of course, __rcu_read_unlock() can be preempted during the time that ->rcu_read_lock_nesting is negative. This could result in the setting of the RCU_READ_UNLOCK_BLOCKED bit after __rcu_read_unlock() checks it, and would also result it this task being queued on the corresponding rcu_node structure's blkd_tasks list. Therefore, some later RCU read-side critical section would enter rcu_read_unlock_special() to clean up -- which could result in deadlock if that critical section happened to be in the scheduler where the runqueue or priority-inheritance locks were held. This situation is dealt with by making rcu_preempt_note_context_switch() check for negative ->rcu_read_lock_nesting, thus refraining from queuing the task (and from setting RCU_READ_UNLOCK_BLOCKED) if we are already exiting from the outermost RCU read-side critical section (in other words, we really are no longer actually in that RCU read-side critical section). In addition, rcu_preempt_note_context_switch() invokes rcu_read_unlock_special() to carry out the cleanup in this case, which clears out the ->rcu_read_unlock_special bits and dequeues the task (if necessary), in turn avoiding needless delay of the current RCU grace period and needless RCU priority boosting. It is still illegal to call rcu_read_unlock() while holding a scheduler lock if the prior RCU read-side critical section has ever had either preemption or irqs enabled. However, the common use case is legal, namely where then entire RCU read-side critical section executes with irqs disabled, for example, when the scheduler lock is held across the entire lifetime of the RCU read-side critical section. Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Peter Zijlstra 提交于
When creating sched_domains, stop when we've covered the entire target span instead of continuing to create domains, only to later find they're redundant and throw them away again. This avoids single node systems from touching funny NUMA sched_domain creation code and reduces the risks of the new SD_OVERLAP code. Requested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Anton Blanchard <anton@samba.org> Cc: mahesh@linux.vnet.ibm.com Cc: benh@kernel.crashing.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1311180177.29152.57.camel@twinsSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Allow for sched_domain spans that overlap by giving such domains their own sched_group list instead of sharing the sched_groups amongst each-other. This is needed for machines with more than 16 nodes, because sched_domain_node_span() will generate a node mask from the 16 nearest nodes without regard if these masks have any overlap. Currently sched_domains have a sched_group that maps to their child sched_domain span, and since there is no overlap we share the sched_group between the sched_domains of the various CPUs. If however there is overlap, we would need to link the sched_group list in different ways for each cpu, and hence sharing isn't possible. In order to solve this, allocate private sched_groups for each CPU's sched_domain but have the sched_groups share a sched_group_power structure such that we can uniquely track the power. Reported-and-tested-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-08bxqw9wis3qti9u5inifh3y@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
In order to prepare for non-unique sched_groups per domain, we need to carry the cpu_power elsewhere, so put a level of indirection in. Reported-and-tested-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-qkho2byuhe4482fuknss40ad@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 7月, 2011 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: fix file mode calculation
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: davinci: DM365 EVM: fix video input mux bits ARM: davinci: Check for NULL return from irq_alloc_generic_chip arm: davinci: Fix low level gpio irq handlers' argument
-
由 Shaohua Li 提交于
I'm running a workload which triggers a lot of swap in a machine with 4 nodes. After I kill the workload, I found a kswapd livelock. Sometimes kswapd3 or kswapd2 are keeping running and I can't access filesystem, but most memory is free. This looks like a regression since commit 08951e54 ("mm: vmscan: correct check for kswapd sleeping in sleeping_prematurely"). Node 2 and 3 have only ZONE_NORMAL, but balance_pgdat() will return 0 for classzone_idx. The reason is end_zone in balance_pgdat() is 0 by default, if all zones have watermark ok, end_zone will keep 0. Later sleeping_prematurely() always returns true. Because this is an order 3 wakeup, and if classzone_idx is 0, both balanced_pages and present_pages in pgdat_balanced() are 0. We add a special case here. If a zone has no page, we think it's balanced. This fixes the livelock. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Acked-by: NMel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
Assume that /sys/kernel/debug/dummy64 is debugfs file created by debugfs_create_x64(). # cd /sys/kernel/debug # echo 0x1234567812345678 > dummy64 # cat dummy64 0x0000000012345678 # echo 0x80000000 > dummy64 # cat dummy64 0xffffffff80000000 A value larger than INT_MAX cannot be written to the debugfs file created by debugfs_create_u64 or debugfs_create_x64 on 32bit machine. Because simple_attr_write() uses simple_strtol() for the conversion. To fix this, use simple_strtoll() instead. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: vfs: fix race in rcu lookup of pruned dentry Fix cifs_get_root() [ Edited the last commit to get rid of a 'unused variable "seq"' warning due to Al editing the patch. - Linus ]
-
由 Linus Torvalds 提交于
Don't update *inode in __follow_mount_rcu() until we'd verified that there is mountpoint there. Kudos to Hugh Dickins for catching that one in the first place and eventually figuring out the solution (and catching a braino in the earlier version of patch). Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Paul E. McKenney 提交于
Given some common flag combinations, particularly -Os, gcc will inline rcu_read_unlock_special() despite its being in an unlikely() clause. Use noinline to prohibit this misoptimization. In addition, move the second barrier() in __rcu_read_unlock() so that it is not on the common-case code path. This will allow the compiler to generate better code for the common-case path through __rcu_read_unlock(). Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
-
由 Paul E. McKenney 提交于
The RCU_BOOST commits for TREE_PREEMPT_RCU introduced an other-task write to a new RCU_READ_UNLOCK_BOOSTED bit in the task_struct structure's ->rcu_read_unlock_special field, but, as noted by Steven Rostedt, without correctly synchronizing all accesses to ->rcu_read_unlock_special. This could result in bits in ->rcu_read_unlock_special being spuriously set and cleared due to conflicting accesses, which in turn could result in deadlocks between the rcu_node structure's ->lock and the scheduler's rq and pi locks. These deadlocks would result from RCU incorrectly believing that the just-ended RCU read-side critical section had been preempted and/or boosted. If that RCU read-side critical section was executed with either rq or pi locks held, RCU's ensuing (incorrect) calls to the scheduler would cause the scheduler to attempt to once again acquire the rq and pi locks, resulting in deadlock. More complex deadlock cycles are also possible, involving multiple rq and pi locks as well as locks from multiple rcu_node structures. This commit fixes synchronization by creating ->rcu_boosted field in task_struct that is accessed and modified only when holding the ->lock in the rcu_node structure on which the task is queued (on that rcu_node structure's ->blkd_tasks list). This results in tasks accessing only their own current->rcu_read_unlock_special fields, making unsynchronized access once again legal, and keeping the rcu_read_unlock() fastpath free of atomic instructions and memory barriers. The reason that the rcu_read_unlock() fastpath does not need to access the new current->rcu_boosted field is that this new field cannot be non-zero unless the RCU_READ_UNLOCK_BLOCKED bit is set in the current->rcu_read_unlock_special field. Therefore, rcu_read_unlock() need only test current->rcu_read_unlock_special: if that is zero, then current->rcu_boosted must also be zero. This bug does not affect TINY_PREEMPT_RCU because this implementation of RCU accesses current->rcu_read_unlock_special with irqs disabled, thus preventing races on the !SMP systems that TINY_PREEMPT_RCU runs on. Maybe-reported-by: NDave Jones <davej@redhat.com> Maybe-reported-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Paul E. McKenney 提交于
PREEMPT_RCU read-side critical sections blocking an expedited grace period invoke rcu_report_exp_rnp(). When the last such critical section has completed, rcu_report_exp_rnp() invokes the scheduler to wake up the task that invoked synchronize_rcu_expedited() -- needlessly holding the root rcu_node structure's lock while doing so, thus needlessly providing a way for RCU and the scheduler to deadlock. This commit therefore releases the root rcu_node structure's lock before calling wake_up(). Reported-by: NEd Tomlinson <edt@aei.ca> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Sage Weil 提交于
open(2) must always include one of O_RDONLY, O_WRONLY, or O_RDWR. No need for any O_APPEND special case. Passing O_WRONLY|O_RDWR is undefined according to the man page, but the Linux VFS interprets this as O_RDWR, so we'll do the same. This fixes open(2) with flags O_RDWR|O_APPEND, which was incorrectly being translated to readonly. Reported-by: NFyodor Ustinov <ufm@ufm.su> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 19 7月, 2011 8 次提交
-
-
由 Jon Povey 提交于
Video input mux settings for tvp7002 and imager inputs were swapped. Comment was correct. Tested on EVM with tvp7002 input. Signed-off-by: NJon Povey <jon.povey@racelogic.co.uk> Acked-by: NManjunath Hadli <manjunath.hadli@ti.com> Cc: stable@kernel.org Signed-off-by: NSekhar Nori <nsekhar@ti.com>
-
由 Todd Poynor 提交于
Avoid NULL dereference of irq_alloc_generic_chip return in low memory conditions. Signed-off-by: NTodd Poynor <toddpoynor@google.com> Signed-off-by: NSekhar Nori <nsekhar@ti.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: pppoe: Must flush connections when MAC address changes too. include/linux/sdla.h: remove the prototype of sdla() tulip: dmfe: Remove old log spamming pr_debugs
-
由 David S. Miller 提交于
Kernel bugzilla: 39252 Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
`make headers_check` complains that linux-2.6/usr/include/linux/sdla.h:116: userspace cannot reference function or variable defined in the kernel this is due to that there is no such a kernel function, void sdla(void *cfg_info, char *dev, struct frad_conf *conf, int quiet); I don't know why we have it in a kernel header, so remove it. Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Add missing ->i_mutex, convert to lookup_one_len() instead of (broken) open-coded analog, cope with getting something like a//b as relative pathname. Simplify the hell out of it, while we are there... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Reviewed-by: NJeff Layton <jlayton@redhat.com>
-
由 Joe Perches 提交于
Commit 726b65ad ("tulip: Convert uses of KERN_DEBUG") enabled some old previously inactive uses of pr_debug converted by commit dde7c8ef ("tulip/dmfe.c: Use dev_<level> and pr_<level>"). Remove these pr_debugs. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mauro Carvalho Chehab 提交于
While compiling it with Fedora 15, I noticed this issue: inlined from ‘si4713_write_econtrol_string’ at drivers/media/radio/si4713-i2c.c:1065:24: arch/x86/include/asm/uaccess_32.h:211:26: error: call to ‘copy_from_user_overflow’ declared with attribute error: copy_from_user() buffer size is not provably correct Cc: stable@kernel.org Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com> Acked-by: NSakari Ailus <sakari.ailus@maxwell.research.nokia.com> Acked-by: NEduardo Valentin <edubezval@gmail.com> Reviewed-by: NEugene Teo <eugeneteo@kernel.sg> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-