- 16 1月, 2010 1 次提交
-
-
由 Amit Kumar Salecha 提交于
o Separate Ethernet driver for Qlogic CNA devices Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2010 1 次提交
-
-
由 Greg Rose 提交于
Modifications for the Kconfig and network device Makefile to add the ixgbevf driver module to the kernel plus basic driver documentation. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 12月, 2009 1 次提交
-
-
由 David Daney 提交于
The Octeon MGMT Ethernet ports are present in some members of the Octeon SOC family (cn52XX and cn56XX have them). The mdio bus connected to the MGMT PHYs is shared with the main octeon-ethernet driver, we force it to be loaded first by calling octeon_mdiobus_force_mod_depencency. The platform devices for the MGMT Ethernet ports are added in arch/mips/cavium-octeon/octeon-platform.c, and the register definitions for the ports live in arch/mips/include/asm/octeon/ along with their ilk. Although it currently is the only driver in drivers/net/octeon, the directory was created looking forward to the day that octeon-ethernet will move there from its current home in drivers/staging. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 15 10月, 2009 1 次提交
-
-
由 Giuseppe Cavallaro 提交于
This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers (Synopsys IP blocks). Driver documentation: o http://stlinux.com/drupal/kernel/network/stmmac Revisions: o http://stlinux.com/drupal/kernel/network/stmmac-driver-revisions Performances: o http://stlinux.com/drupal/benchmarks/networking/stmmacSigned-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2009 1 次提交
-
-
由 Shreyas Bhatewara 提交于
Ethernet NIC driver for VMware's vmxnet3 From: Shreyas Bhatewara <sbhatewara@vmware.com> This patch adds driver support for VMware's virtual Ethernet NIC: vmxnet3 Guests running on VMware hypervisors supporting vmxnet3 device will thus have access to improved network functionalities and performance. Signed-off-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NRonghua Zhang <ronghua@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 10月, 2009 1 次提交
-
-
由 David S. Miller 提交于
We need PHY drivers to initialize in a static kernel before the MAC drivers that use them. So link them in first. Based upon a report by Felix Radensky. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 10月, 2009 1 次提交
-
-
由 Choi, David 提交于
This is the first registration of ks8851 network driver with MLL(address/data multiplexed) interface. Signed-off-by : David J. Choi <david.choi@micrel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 9月, 2009 1 次提交
-
-
由 Maxime Bizon 提交于
Signed-off-by: NMaxime Bizon <mbizon@freebox.fr> Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 20 8月, 2009 1 次提交
-
-
由 John Linn 提交于
This patch adds support for the Xilinx Ethernet Lite device. The soft logic core from Xilinx is typically used on Virtex and Spartan designs attached to either a PowerPC or a Microblaze processor. Signed-off-by: NSadanand M <sadanan@xilinx.com> Signed-off-by: NJohn Linn <john.linn@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 7月, 2009 1 次提交
-
-
由 Ben Dooks 提交于
Network driver for the SPI version of the Micrel KS8851 network chip. Signed-off-by: NBen Dooks <ben@simtec.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 6月, 2009 1 次提交
-
-
由 Oskar Schirmer 提交于
The s6000 on-chip MAC supports 10/100/1000Mbit and is connected to an external PHY via MII or RGMII interface. [jw@emlix.com: don't use device->bus_id directly] Signed-off-by: NOskar Schirmer <os@emlix.com> Signed-off-by: NDaniel Glockner <dg@emlix.com> Acked-by: N"David S. Miller" <davem@davemloft.net> Signed-off-by: NJohannes Weiner <jw@emlix.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NChris Zankel <chris@zankel.net>
-
- 09 6月, 2009 1 次提交
-
-
由 Michael Chan 提交于
The CNIC driver controls BNX2 hardware rings and resources used by iSCSI. Most hardware resources for iSCSI are separate from those used for ethernet networking. iSCSI uses a separate MAC address and IP address. The CNIC driver creates a UIO interface to handle the non-offloaded packets such as ARP, etc in userspace. Signed-off-by: NMichael Chan <mchan@broadcom.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 08 6月, 2009 1 次提交
-
-
由 Richard Röjfors 提交于
This is a driver for the Micrel KS8842 ethernet switch. The supplied code is for driving the KS8842 through the Timberdale FPGA on the Russellville board, a development board for Intel Atom CPU in the automotive area. Signed-off-by: NRichard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 5月, 2009 1 次提交
-
-
由 Finn Thain 提交于
Changeset ca17584b ("mac8390: update to net_device_ops") broke mac8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in mac8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. They seem to be of no value since COMPAT_NET_DEV_OPS is going away soon. Tested with a Kinetics EtherPort card. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 5月, 2009 1 次提交
-
-
由 Anant Gole 提交于
Add support for TI DaVinci EMAC driver. TI DaVinci Ethernet Media Access Controller module is based upon TI CPPI 3.0 DMA engine and supports 10/100 Mbps on all and Gigabit modes on some TI devices. It supports MII/RMII and has up to 8Kbytes of internal descriptor memory. This driver has been working on several TI devices including DM644x, DM646x and DA830 platforms. The specs of this device are available at: http://www.ti.com/litv/pdf/sprue24aSigned-off-by: NAnant Gole <anantgole@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NChaithrika U S <chaithrika@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 4月, 2009 1 次提交
-
-
由 Ben Hutchings 提交于
These roughly mirror many of the MII library functions and are based on code from the sfc driver. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 4月, 2009 1 次提交
-
-
由 Grant Likely 提交于
This patch adds support for the Xilinx ll_temac 10/100/1000 Ethernet device. The ll_temac ipcore is typically used on Xilinx Virtex and Spartan designs attached to either a PowerPC 4xx or Microblaze processor. At the present moment, this driver only works with Virtex5 PowerPC designs because it assumes DCR is used to access the DMA registers. However, the low level access to DMA registers is abstracted and it should be easy to adapt for the other implementations. I'm posting this driver now as an RFC. There are still some things that need to be tightened up, but it does appear to be stable. Derived from driver code written by Yoshio Kashiwagi and David H. Lynch Jr. Tested on Xilinx ML507 eval board with Base System Builder generated FPGA design. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 4月, 2009 1 次提交
-
-
由 Alexander Duyck 提交于
This adds an igbvf driver to handle virtual functions provided by the igb driver when SR-IOV has been enabled. A virtual function is a lightweight pci-e function that supports a single queue and shares resources with the 82576 physical function contained within the igb driver. To spawn virtual functions from the igb driver all that is needed is to enable CONFIG_PCI_IOV and have an 82576 Ethernet adapter on a system that supports SR-IOV in the BIOS. The virtual functions will appear after the interface is loaded. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2009 1 次提交
-
-
由 Ramkrishna Vepa 提交于
- Kconfig and Makefile related changes for vxge driver. - No changes in current submission. - Changes from previous submission - - Incorporated the following review comments as per Bill Flink: - Add dependancy on INET along with PCI - Remove dependancy on INET_LRO and add GRO support. - Made this patch as last patch as per Ben Hutchings comments. Signed-off-by: NSivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: NRastapur Santosh <santosh.rastapur@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2009 1 次提交
-
-
由 Thierry Reding 提交于
This patch adds a platform device driver that supports the OpenCores 10/100 Mbps Ethernet MAC. The driver expects three resources: one IORESOURCE_MEM resource defines the memory region for the core's memory-mapped registers while a second IORESOURCE_MEM resource defines the network packet buffer space. The third resource, of type IORESOURCE_IRQ, associates an interrupt with the driver. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 3月, 2009 2 次提交
-
-
由 Sathya Perla 提交于
Signed-off-by: NSathya Perla <sathyap@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilya Yanok 提交于
Driver for Dave DNET ethernet controller found on Dave/DENX QongEVB-LITE FPGA. Heavily based on Dave sources, I've just adopted it to current kernel version and done some code cleanup. Signed-off-by: NIlya Yanok <yanok@emcraft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2009 1 次提交
-
-
由 Jie Yang 提交于
Supporting AR8131, and AR8132. Signed-off-by: NJie Yang <jie.yang@atheros.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2009 1 次提交
-
-
由 Andy Fleming 提交于
The MDIO bus drivers for the UCC and gianfar ethernet controllers are essentially the same. There's no reason to duplicate that much code. Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 1月, 2009 1 次提交
-
-
由 Inaky Perez-Gonzalez 提交于
Integrate the i2400m driver into the kernel's build and Kconfig. Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 12月, 2008 1 次提交
-
-
由 Steve Glendinning 提交于
This patch adds a driver for the LAN9240 PCI ethernet adapter. Changes since initial submission: - debug msg_level has been changed to use standard definitions - convert to use net_device_ops Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2008 3 次提交
-
-
由 Stephen Hemminger 提交于
Another device using 8390 library that needs converting. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Another device using 8390 library that needs converting. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Another device using 8390 library that needs converting. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2008 1 次提交
-
-
由 Stephen Hemminger 提交于
Another related 8390 driver. Since this is for nubus, not sure if anyone still has the hardware? Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 11月, 2008 1 次提交
-
-
由 Randy Dunlap 提交于
Fix hp-plus driver link errors. Builds as loadable module and kernel image driver. All drivers that use 8390.o or 8390p.o that will build on i386 with MCA/PCI/EISA/ISA were built successfully both =m and =y. drivers/built-in.o: In function `hpp_open': hp-plus.c:(.text+0xac06c): undefined reference to `eip_interrupt' hp-plus.c:(.text+0xac0d7): undefined reference to `eip_open' drivers/built-in.o: In function `hpp_close': hp-plus.c:(.text+0xac1bb): undefined reference to `eip_close' drivers/built-in.o: In function `hpp_probe1': hp-plus.c:(.init.text+0xa98a): undefined reference to `NS8390p_init' drivers/built-in.o: In function `hp_plus_probe': (.init.text+0xa9fe): undefined reference to `__alloc_eip_netdev' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 11月, 2008 1 次提交
-
-
由 Steve Glendinning 提交于
Attached is a driver for SMSC's LAN911x and LAN921x families of embedded ethernet controllers. There is an existing smc911x driver in the tree; this is intended to replace it. Dustin McIntire (the author of the smc911x driver) has expressed his support for switching to this driver. This driver contains workarounds for all known hardware issues, and has been tested on all flavours of the chip on multiple architectures. This driver now uses phylib, so this patch also adds support for the device's internal phy Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NBahadir Balban <Bahadir.Balban@arm.com> Signed-off-by: NDustin Mcintire <dustin@sensoria.com> Signed-off-by: NBill Gatliff <bgat@billgatliff.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 31 10月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 21 10月, 2008 1 次提交
-
-
由 Chris Zankel 提交于
Add support for the on-board Sonic Ethernet device for the XT2000 evaluation board. Signed-off-by: NChris Zankel <chris@zankel.net>
-
- 18 9月, 2008 4 次提交
-
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Guo-Fu Tseng 提交于
Supporting JMC250, and JMC260. Signed-off-by: NGuo-Fu Tseng <cooldavid@cooldavid.org> Acked-and-tested-by: NEthan Hsiao <ethanhsiao@jmicron.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Scott Feldman 提交于
Signed-off-by: NScott Feldman <scofeldm@cisco.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Chris Snook 提交于
Driver for Atheros L2 10/100 network device. Includes necessary changes for Kconfig, Makefile, and pci_ids.h. Signed-off-by: NChris Snook <csnook@redhat.com> Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 03 9月, 2008 1 次提交
-
-
由 Randy Dunlap 提交于
Fix hp-plus Makefile object file: drivers/built-in.o: In function `hpp_open': hp-plus.c:(.text+0xaf445): undefined reference to `ei_interrupt' hp-plus.c:(.text+0xaf4ac): undefined reference to `ei_open' drivers/built-in.o: In function `hpp_close': hp-plus.c:(.text+0xaf59d): undefined reference to `ei_close' drivers/built-in.o: In function `hpp_probe1': hp-plus.c:(.init.text+0x7314): undefined reference to `ei_poll' drivers/built-in.o: In function `hp_plus_probe': (.init.text+0x7407): undefined reference to `__alloc_ei_netdev' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 23 7月, 2008 1 次提交
-
-
由 Jie Yang 提交于
Full patch for the Atheros L1E Gigabit Ethernet driver. Supportring AR8121, AR8113 and AR8114 Signed-off-by: Jie Yang <jie.yang @atheros.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-