Combine the two quirks.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=109481Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

DP audio is derived from the dfs clock.
Signed-off-by: NSlava Grigorev <slava.grigorev@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This adds initial DP 1.2 MST support to radeon, on CAYMAN
and up in theory.

This is off by default.

v2: agd5f:
- add UNIPHY3 offsets
- move atom cmd table code into atombios_encoders.c
- whitespace cleanup
- replace some magic numbers with proper defines
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Missing parameter when fetching the real voltage values
from atom.  Fixes problems with dynamic clocking on
certain boards.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=87457Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

We need this in the dpm code.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need it for dpm.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Required for fan control support.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The tables:
 * supported_devices_connector_convert
 * supported_devices_connector_object_id_convert
 * object_connector_convert
are used in redeon_atombios.c only, so declare them as static.
Signed-off-by: NMichele Curti <michele.curti@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On systems with special thermal configurations make sure we make
note of the thermal setup.  This is required for proper firmware
configuration on these systems.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Vbios connector table lists non-existent VGA port.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83184Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Some hawaii boards use a different method for fetching the
voltage information from the vbios.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Looks like the lm63 driver supports the lm64 as well.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Some newer boards use SVI2 for voltage control rather
than GPIO.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set the default to 600Mhz if it's not set in the bios,
and bump the default to 600Mhz if it's lower than that.

This fixes display issues with certain 4k DP monitors when
using 5.4 Ghz DP clocks.

v2: fix typo.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The BlankCrtc table in some DCE8 boards has some
logic shortcuts for the vbios when this bit is set.
Clear it for driver use.

v2: fix typo

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73420Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Need to swap the data for big endian.
Notcied by sylware in IRC.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's either 100 or 1000 depending on the flags in the
table.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

crtc_clock is now supposed to be the actual pixel clock corresponding to
the other crtc_ timing values. Populate crtc_clock appropriately in
radeon_atom_get_tv_timings().

This was the only obvious place where we frob with the crtc_ timigns
directly instead of calling drm_mode_set_crtcinfo() which would also
update crtc_clock.

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

drivers: gpu: Move prototype declarations to header file radeon_mode.h from radeon_atombios.c and radeon_combios.c

Move prototype declarations of functions radeon_get_encoder_enum() and
radeon_link_encoder_connector() to header file drm/radeon/radeon_mode.h
because they are used by more than one file.

This eliminates the following warnings in drm/radeon/radeon_encoders.c:
drivers/gpu/drm/radeon/radeon_encoders.c:86:1: warning: no previous prototype for ‘radeon_get_encoder_enum’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_encoders.c:162:1: warning: no previous prototype for ‘radeon_link_encoder_connector’ [-Wmissing-prototypes]
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move prototype declaration of functions radeon_add_atom_connector() and
radeon_add_legacy_connector() to header file drm/radeon/radeon_mode.h
because  they are used by more than one file.

This eliminates the following warning in drm/radeon/radeon_connectors.c:
drivers/gpu/drm/radeon/radeon_connectors.c:1588:1: warning: no previous prototype for ‘radeon_add_atom_connector’ [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_connectors.c:2020:1: warning: no previous prototype for ‘radeon_add_legacy_connector’ [-Wmissing-prototypes]
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Copy-paste typo.  Value should be 0-2, not 0-1.
Noticed-by: NSylvain BERTRAND <sylware@legeek.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Newer versions of gcc seem to wander off into the weeds
when dealing with variable sizes arrays in structs.
Rather than indexing the arrays, use pointer arithmetic.

Fix up spread spectrum tables.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The table has the following format:

typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT         //usSrcDstTableOffset pointing to this structure
{
  UCHAR               ucNumberOfSrc;
  USHORT              usSrcObjectID[1];
  UCHAR               ucNumberOfDst;
  USHORT              usDstObjectID[1];
}ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT;

usSrcObjectID[] and usDstObjectID[] are variably sized, so we
can't access them directly.  Use pointers and update the offset
appropriately when accessing the Dst members.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

If the LCD table contains an EDID record, properly account
for the edid size when walking through the records.

This should fix error messages about unknown LCD records.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Check the overrides in the firmware info table before
enabling spread spectrum on the engine or memory clocks.

Some boards may have valid spread spectrum tables, but
shouldn't necessarily have it enabled.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for btc asics. This includes:
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen switching

Set radeon.dpm=1 to enable.

v2: remove unused radeon_atombios.c changes,
    make missing smc ucode non-fatal
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No support for reading temperature back yet.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Required for DPM on CIK.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For correctness.  The fb divider isn't actually used
in any of the relevant dpm code.  It's calculated
from the other parameters.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It seems gcc 4.8.1 generates bogus code for the old logic causing
part of the function to get skipped.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Parsing the table in incorrectly led to problems with
certain asics with mclk switching.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix patching of vddc values for SI and enable manually forcing
clocks to default levels as per NI.

This improves the out of the box performance with SI asics.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Bad pointer math.  Fixes hangs in state transitions with
BTC+ asics.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The arrays items are variable sized.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>