This patch implements Xen save/restore and migration.

Saving is triggered via xenbus, which is polled in
drivers/xen/manage.c.  When a suspend request comes in, the kernel
prepares itself for saving by:

1 - Freeze all processes.  This is primarily to prevent any
    partially-completed pagetable updates from confusing the suspend
    process.  If CONFIG_PREEMPT isn't defined, then this isn't necessary.

2 - Suspend xenbus and other devices

3 - Stop_machine, to make sure all the other vcpus are quiescent.  The
    Xen tools require the domain to run its save off vcpu0.

4 - Within the stop_machine state, it pins any unpinned pgds (under
    construction or destruction), performs canonicalizes various other
    pieces of state (mostly converting mfns to pfns), and finally

5 - Suspend the domain

Restore reverses the steps used to save the domain, ending when all
the frozen processes are thawed.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

When saving a domain, the Xen tools need to remap all our mfns to
portable pfns.  In order to remap our p2m table, it needs to know
where all its pages are, so maintain the references to the p2m table
for it to use.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Rename dummy_shared_info to xen_dummy_shared_info and make it
non-static, in anticipation of users outside of enlighten.c
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

When using sparsemem and memory hotplug, the kernel's pseudo-physical
address space can be discontigious.  Previously this was dealt with by
having the upper parts of the radix tree stubbed off.  Unfortunately,
this is incompatible with save/restore, which requires a complete p2m
table.

The solution is to have a special distinguished all-invalid p2m leaf
page, which we can point all the hole areas at.  This allows the tools
to see a complete p2m table, but it only costs a page for all memory
holes.

It also simplifies the code since it removes a few special cases.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add a config option to set the max size of a Xen domain.  This is used
to scale the size of the physical-to-machine array; it ends up using
around 1 page/GByte, so there's no reason to be very restrictive.

For a 32-bit guest, the default value of 8GB is probably sufficient;
there's not much point in giving a 32-bit machine much more memory
than that.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We now support the use of memory hotplug, so the physical to machine
page mapping structure must be dynamic.  This is implemented as a
two-level radix tree structure, which allows us to efficiently
incrementally allocate memory for the p2m table as new pages are
added.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Make sure resched interrupts appear in /proc/interrupts in the proper
place.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

move arch/x86/xen/manage.c under drivers/xen/to share codes
with x86 and ia64.
ia64/xen also uses manage.c
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

For some perverse reason, if you call add_preferred_console() it prevents
setup_early_printk() from successfully enabling the boot console -
unless you make it a preferred console too...

Also, make xenboot console output distinct from normal console output,
since it gets repeated when the console handover happens, and the
duplicated output is confusing without disambiguation.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>

Without console= arguments on the kernel command line, the first
console to register becomes enabled and the preferred console (the one
behind /dev/console).  This is normally tty (assuming
CONFIG_VT_CONSOLE is enabled, which it commonly is).

This is okay as long tty is a useful console.  But unless we have the
PV framebuffer, and it is enabled for this domain, tty0 in domU is
merely a dummy.  In that case, we want the preferred console to be the
Xen console hvc0, and we want it without having to fiddle with the
kernel command line.  Commit b8c2d3df
did that for us.

Since we now have the PV framebuffer, we want to enable and prefer tty
again, but only when PVFB is enabled.  But even then we still want to
enable the Xen console as well.

Problem: when tty registers, we can't yet know whether the PVFB is
enabled.  By the time we can know (xenstore is up), the console setup
game is over.

Solution: enable console tty by default, but keep hvc as the preferred
console.  Change the preferred console to tty when PVFB probes
successfully, unless we've been given console kernel parameters.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add pte_flags() to extract the flags from a pte.  This is a special
case of pte_val() which is only guaranteed to return the pte's flags
correctly; the page number may be corrupted or missing.

The intent is to allow paravirt implementations to return pte flags
without having to do any translation of the page number (most notably,
Xen).
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

When enabling interrupts, we don't need to worry about preemption,
because we either enter with interrupts disabled - so no preemption -
or the caller is confused and is re-enabling interrupts on some
indeterminate processor.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The guest can legitimately change things like cr4.OSFXSR and
OSXMMEXCPT, so let it.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Use the new sched_op hypercall, mainly because xenner doesn't support
the old one.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Xen will trap and emulate clts, but its better to use a hypercall.
Also, xenner doesn't handle clts.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Non-PAE operation has been deprecated in Xen for a while, and is
rarely tested or used.  xen-unstable has now officially dropped
non-PAE support.  Since Xen/pvops' non-PAE support has also been
broken for a while, we may as well completely drop it altogether.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Xen uses bitops to manipulate page flags.  Make it use proper page flag
functions.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cpu_online(), cpu_present(), for_each_possible_cpu(), num_possible_cpus()
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There's no real reason we can't support sparsemem/discontigmem, so do so.
This is mostly useful to support hotplug memory.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

xen_sysexit and xen_iret were doing essentially the same thing.  Rather
than having a separate implementation for xen_sysexit, we can just strip
the stack back to an iret frame and jump into xen_iret.  This removes
a lot of code and complexity - specifically, another critical region.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The usual pagetable locking protocol doesn't seem to apply to updates
to init_mm, so don't rely on preemption being disabled in xen_set_pte_at
on init_mm.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Various places in the kernel flush the tlb even though preemption doens't
guarantee the tlb flush is happening on any particular CPU.  In many cases
this doesn't seem to matter, so don't make a fuss about it.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

split out x86 specific part from grant-table.c and
allow ia64/xen specific initialization.
ia64/xen grant table is based on pseudo physical address
(guest physical address) unlike x86/xen. On ia64 init_mm
doesn't map identity straight mapped area.
ia64/xen specific grant table initialization is necessary.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

move arch/x86/xen/events.c undedr drivers/xen to share codes
with x86 and ia64. And minor adjustment to compile.
ia64/xen also uses events.c
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

ia64/xen also uses it too. Move it into common place so that
ia64/xen can share the code.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Use jmp rather than call for the iret fixup, so its consistent with
the sysexit fixup, and it simplifies the stack (which is already
complex).
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Mask MCE/MCA out of cpu caps.  Its harmless to leave them there, but
it does prevent the kernel from starting an unnecessary thread.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

If an event comes in while events are currently being processed, then
just increment the counter and have the outer event loop reprocess the
pending events.  This prevents unbounded recursion on heavy event
loads (of course massive event storms will cause infinite loops).
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

retrigger_dynirq() was incomplete, and didn't properly set the event
to be pending again.  It doesn't seem to actually get used.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Xen supports the notion of a debug interrupt which can be triggered
from the console.  For now this is implemented to show pending events,
masks and each CPU's pending event set.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

64-bit Xen supports sysenter for 32-bit guests, so support its
use.  (sysenter is faster than int $0x80 in 32-on-64.)

sysexit is still not supported, so we fake it up using iret.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We can fold the essentially common pte functions together now.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

pte_t always contains a "pte" field for the whole pte value, so make
use of it.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Convert Xen pagetable handling to use appropriate *val_t types.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Rename (alloc|release)_(pt|pd) to pte/pmd to explicitly match the name
of the appropriate pagetable level structure.

[ x86.git merge work by Mark McLoughlin <markmc@redhat.com> ]
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

xen does not use the global cpu_initialized mask, but rather,
a specific one. So we change its name so it won't conflict with the upcoming
movement of cpu_initialized_mask from smp_64.h to smp_32.h.
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
CC: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Change iret implementation to not be dependent on direct-access vcpu
structure.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This makes the Xen console just work.  Before, you had to ask for it
on the kernel command line with console=hvc0
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Before:
   total: 2 errors, 2 warnings, 138 lines checked
After:
   total: 0 errors, 2 warnings, 138 lines checked

No code changed:

arch/x86/xen/multicalls.o:

   text	   data	    bss	    dec	    hex	filename
    887	   2832	      0	   3719	    e87	multicalls.o.before
    887	   2832	      0	   3719	    e87	multicalls.o.after

md5:
   cf6d72d9db6dc5a3ebe01eec9f05e95f  multicalls.o.before.asm
   cf6d72d9db6dc5a3ebe01eec9f05e95f  multicalls.o.after.asm
Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>