Boards used to specify zreladdr in their Makefile.boot with
zreladdr-y := x, so conflicting zreladdrs were silently overwritten.
This patch changes this to zreladdr-y += x, so that we end
up with multiple words in zreladdr in such a case. We can
detect this later and complain if necessary.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The sclk_cam clocks are now controlled by the top level FIMC media
device driver bound to "s5p-fimc-md" platform device.
Rename sclk_cam clocks so they accessible by the corresponding
driver.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Some platforms (like OMAP not to name it) are doing rather complicated
hacks just to determine the base UART address to use.  Let's give their
addruart macro some slack by providing an extra work register which will
allow for much needed cleanups.

This is basically a no-op as this commit is only adding the extra argument
to the macro but no one is using it yet.
Signed-off-by: Nnicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: NKevin Hilman <khilman@ti.com>

The default plat_data struct for TSADC is added in devs-ts.c
and duplication is removed from the following machines.
Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Make the S5PV210 power management code depend directly on PM rather
than another S5PV210 specific symbol.
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch makes Samsung S5PV210 to use DMA PL330 driver
on DMADEVICE. The S5PV210 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch adds to support PL330-DMA driver on DMADEVICE for S5P SoCs.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
CC: Kukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Fixed the following warning for S5PV210.

arch/arm/mach-s5pv210/pm.c: In function 's5pv210_pm_add':
arch/arm/mach-s5pv210/pm.c:139: warning: assignment from
incompatible pointer type

Also, staticized the function.
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Rather than marking the mach/gpio.h header files which want to use the
trivial GPIOLIB implementation, mark those which do not want to use it
instead.  This means that by default, you get the trivial implementation
and only have to do something extra if you need to.  This should
encourage the use of the trivial default implementation.

As an additional bonus, several gpio.h header files become empty.
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: NJamie Iles <jamie@jamieiles.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Many of the gpio_to_irq implementations use the gpiolib version of this
function.  Provide the standard gpiolib gpio_to_irq() for everyone, but
allow platforms to override it if they wish.  Add the neccessary
overrides for those platforms which do not use the standard definition.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Consolidate 24 trivial gpiolib implementions out of mach/gpio.h
into asm/gpio.h.  This is basically the include of asm-generic/gpio.h
and the definition of gpio_get_value, gpio_set_value, and gpio_cansleep
as described in Documentation/gpio.txt
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: NDavid Brown <davidb@codeaurora.org>
Acked-by: NDavid Brown <davidb@codeaurora.org>
Tested-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add support for MFC device to plat-s5p, mach-exynos4, mach-s5pv210:
 - clock support
 - memory mapping and reserving
 - s5p_device_mfc platform device
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

To handle i2s0 interrupt and To fix compilation error
adds IRQ_I2S0 for exynos4, s3c64xx, s5p64x0
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
[kgene.kim@samsung.com: Fixed build failure due to inclusion]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Exynos4 and S5PC110(S5PV210) has Internal dma(idma) in AUDSS.
To support idma, register idma platform device.
and Exynos4 and S5PC110 has different IDMA address.
TO handle different IDMA address, register idma platform data
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Use plat/regs-fb-v4.h in machine files instead of mach/regs-fb.h.
Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds support for LCD backlight using PWM timer for
Samsung SMDKV210 board.
Signed-off-by: NBanajit Goswami <banajit.g@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Move the duplicated code for SPDIF ops from S5PV210 and S5PC100.
So, the same can be used in EXYNOS4.
Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This is temporary patch for building with clkdev.
Signed-off-by: NThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add a callback so that per-arch can do pre-sleep and post-resume
gpio configuration so that for the S3C64XX, the GPIO configuration
is restored before the sleep mode is cleared.

For the S3C64XX case, it means that the GPIOs get set back to normal
operation after the restore code puts the original configurations
back in after the
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

According to discussion of the ARM arch subsystem migration,
ARM cpufreq drivers move to drivers/cpufreq. So this patch
adds Kconfig.arm for ARM like x86 and adds Samsung S5PV210
and EXYNOS4210 cpufreq driver compile in there.
As a note, otherw will be moved.

Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NDave Jones <davej@redhat.com>

tx_st_done is required for checking the transmission status of SPI
channels with different fifo levels
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Move the call to cpu_suspend into C code, and noticing that all the
s3c_cpu_save implementations are now identical, we can move this
into the common samsung code.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

s3c_cpu_save does not need to save any registers with the new
cpu_suspend calling convention.  Remove these redundant instructions.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

cpu_suspend() has a weird calling method which makes it only possible to
call from assembly code: it returns with a modified stack pointer to
finish the suspend, but on resume, it 'returns' via a provided pointer.

We can make cpu_suspend() appear to be a normal function merely by
swapping the resume pointer argument and the link register.

Do so, and update all callers to take account of this more traditional
behaviour.
Acked-by: NFrank Hofmann <frank.hofmann@tomtom.com>
Tested-by: NKevin Hilman <khilman@ti.com>
Acked-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Move the Samsung s5pv210 SoC GPIO driver to drivers/gpio
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Replace sysdev classes and struct sys_device objects used for "core"
power management by Samsung platforms with struct syscore_ops objects
that are simpler.

This generally reduces the code size and the kernel memory footprint.
It also is necessary for removing sysdevs entirely from the kernel in
the future.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

Remove duplicated #include('s) in
  arch/arm/mach-s5pv210/mach-smdkv210.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This change is intended to correct security subsystem interrupt names
for Samsung S5PV210 and S5PC110 SoCs.
Signed-off-by: NVladimir Zapolskiy <vzapolskiy@gmail.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

None of the existing cpufreq drivers uses the second argument of
its .suspend() callback (which isn't useful anyway), so remove it.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NDave Jones <davej@redhat.com>

This patch removes all global data from common s5p gpio interrupt
handler code. This enables to reuse this code on EXYNOS4 platform.
Instead of global data (IRQ_GPIOINT interrupt number,
S5P_GPIOINT_GROUP_MAXNR groups count), a s5p_register_gpioint_bank()
function is introduced. It is aimed to be called from gpiolib init.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch updates s5pv210_defconfig and s5p64x0_defconfig for
HRT support and CONFIG_S5P_HRT is used for its configuration.
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds support HRT for machines of S5P64X0 and S5PV210.
Basically, PWM Timer3 is used for clockevent and PWM Timer4 is
used for clocksource. Since PWM Timer3 is used for other purpose,
PWM Timer2 is used on SMDKV210.
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add common code for MIPI-CSIS and MIPI-DSIM drivers to support
their corresponding D-PHY's enable and reset control.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>