- 03 5月, 2016 27 次提交
-
-
由 Monk Liu 提交于
Add two callbacks to scheduler to maintain jobs, and invoked for job timeout calculations. Now TDR measures time gap from job is processed by hw. v2: fix typo Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
original time out detect routine is incorrect, cuz it measures the gap from job scheduled, but we should only measure the gap from processed by hw. Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
the mirror_list will be used for later time out detect feature. This is needed to properly detect a GPU timeout with the scheduler. Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
for those jobs submitted through scheduler, do not free it immediately after scheduled, instead free it in global workqueue by its sched fence signaling callback function. v2: call uf's bo_undef after job_run() call job's sync free after job_run() no static inline __amdgpu_job_free() anymore, just use kfree(job) to replace it. Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Vitaly Prosyak 提交于
Fixed mc stop and resume hardware programming sequence. Signed-off-by: NVitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
Consolidate job initialization in one place rather than duplicating it in multiple places. Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
More ground work for conditional execution on SDMA necessary for preemption. Signed-off-by: NMonk Liu <monk.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
This adds the groundwork for conditional execution on SDMA which is necessary for preemption. Signed-off-by: NMonk Liu <monk.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Chunming Zhou 提交于
V2: the signaled items on the LRU maintain their order Signed-off-by: NChunming Zhou <David1.Zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Nils Wallménius 提交于
Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Nils Wallménius 提交于
It is only used locally in amdgpu_get_bios Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Nils Wallménius 提交于
Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Nils Wallménius 提交于
Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
Some GPU block like UVD and VCE require hard reset to be properly resume if there is no real powerdown of the asic like during various hibernation step. This patch perform such hard reset. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
In some cases, like when freezing for hibernation, we need to be able to force hard reset even if no engine are stuck. This patch add a bool option to current asic reset callback to allow to force hard reset on asic that supports it. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
Quite few suspend/hibernation bugs are related to this block. Add an option to disable those as a work around. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
Quite few suspend/hibernation bugs are related to this block. Add an option to disable those as a work around. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
This match the exact same control flow as existing code. It just use goto instead of multiple levels of if/else. It also clarify early initialization failures by clearing rdev->has_vce doing so does not change end result from hardware point of view, it only avoids printing more error messages down the line and thus only the original error is reported. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
This match the exact same control flow as existing code. It just use goto instead of multiple levels of if/else. It also clarify early initialization failures by clearing rdev->has_vce doing so does not change end result from hardware point of view, it only avoids printing more error messages down the line and thus only the original error is reported. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
This match the exact same control flow as existing code. It just use goto instead of multiple levels of if/else. It also clarify early initialization failures by clearing rdev->has_vce doing so does not change end result from hardware point of view, it only avoids printing more error messages down the line and thus only the original error is reported. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
This will later on serve for module option to disable vce. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
This match the exact same control flow as existing code. It just use goto instead of multiple levels of if/else. It also clarify early initialization failures by clearing rdev->has_uvd doing so does not change end result from hardware point of view, it only avoids printing more error messages down the line and thus only the original error is reported. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
This match the exact same control flow as existing code. It just use goto instead of multiple levels of if/else. It also clarify early initialization failures by clearing rdev->has_uvd doing so does not change end result from hardware point of view, it only avoids printing more error messages down the line and thus only the original error is reported. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
This match the exact same control flow as existing code. It just use goto instead of multiple levels of if/else. It also clarify early initialization failures by clearing rdev->has_uvd doing so does not change end result from hardware point of view, it only avoids printing more error messages down the line and thus only the original error is reported. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
This match the exact same control flow as existing code. It just use goto instead of multiple levels of if/else. It also clarify early initialization failures by clearing rdev->has_uvd doing so does not change end result from hardware point of view, it only avoids printing more error messages down the line and thus only the original error is reported. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
This match the exact same control flow as existing code. It just use goto instead of multiple levels of if/else. It also clarify early initialization failures by clearing rdev->has_uvd doing so does not change end result from hardware point of view, it only avoids printing more error messages down the line and thus only the original error is reported. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérome Glisse 提交于
This match the exact same control flow as existing code. It just use goto instead of multiple levels of if/else. It also clarify early initialization failures by clearing rdev->has_uvd doing so does not change end result from hardware point of view, it only avoids printing more error messages down the line and thus only the original error is reported. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 28 4月, 2016 5 次提交
-
-
由 Maxime Ripard 提交于
Add the settings to support the NTSC standard. Reviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
Now that we have support for the composite output, we can start adding new supported standards. Start with PAL, and we will add other eventually. Reviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
Some Allwinner SoCs have an IP called the TV encoder that is used to output composite and VGA signals. In such a case, we need to use the second TCON channel. Add support for that TV encoder. Reviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
One of the A10 display pipeline possible output is an RGB interface to drive LCD panels directly. This is done through the first channel of the TCON that will output our video signals directly. Reviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
The Allwinner A10 and subsequent SoCs share the same display pipeline, with variations in the number of controllers (1 or 2), or the presence or not of some output (HDMI, TV, VGA) or not. Add a driver with a limited set of features for now, and we will hopefully support all of them eventually Reviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 27 4月, 2016 4 次提交
-
-
由 Daniel Vetter 提交于
Need to move the free function around a bit, but otherwise mostly just removing code. Specifically we can nuke all the _locked variants since the weak idr reference is now protected by the idr_mutex, which we never hold anywhere expect in the lookup/reg/unreg functions. And those never call anything else. Another benefit of this is that this patch switches the weak reference logic from kref_put_mutex to kref_get_unless_zero. And the later is in general more flexible wrt accomodating multiple weak references protected by different locks, which might or might not come handy eventually. But one consequence of that switch is that we need to acquire the blob_lock from the free function for the list_del calls. That's a bit tricky to pull off, but works well if we pick the exact same scheme as is already used for framebuffers. Most important changes: - filp list is maintainer by create/destroy_blob ioctls directly (already the case, so we can just remove the redundant list_del from the free function). - filp close handler walks the filp-private list lockless - works because we know no one else can access it. I copied the same comment from the fb code over to explain this. - Otherwise we need to sufficiently restrict blob_lock critical sections to avoid all the unreference calls. Easy to do once the blob_lock only protects the list, and no longer the weak reference. Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
Random drive-by refactoring I spotted. Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
Dave Airlie had at least the refcount leak fixed in a later patch (but that patch does other things which need a bit more work). But we still have the trouble that silly userspace could hit the WARN_ON in drm_mode_object_find. Fix this all up to make sure we don't leak objects, and don't spew into demsg. Fixes: d0f37cf6 ("drm/mode: move framebuffer reference into object.") Testcase: igt/kms_addfb_basic/invalid-*-prop* Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
Slipped through the cracks in my review. The one issue I spotted is that drm_mode_object_find now acquires references and can be used on FB objects, which caused follow-on bugs in get/set_prop ioctls. Follow-up patches will fix that. [airlied: fixup some incr fb/decr object mixups] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 26 4月, 2016 4 次提交
-
-
由 Carlos Palminha 提交于
ARC PGU could be found on some development boards from Synopsys. This is a simple byte streamer that reads data from a framebuffer and sends data to the single encoder. Signed-off-by: NCarlos Palminha <palminha@synopsys.com> Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: linux-snps-arc@lists.infradead.org
-
由 Stefan Agner 提交于
The driver supports now a second platform and received several fixes, hence a version increment is justified. Signed-off-by: NStefan Agner <stefan@agner.ch>
-
由 Stefan Agner 提交于
Use CMA helper drm_fbdev_cma_restore_mode to restore fbdev mode in process which uses drm/kms dies. Signed-off-by: NStefan Agner <stefan@agner.ch>
-
由 Stefan Agner 提交于
Disabling output polling before unloading the driver. Signed-off-by: NStefan Agner <stefan@agner.ch>
-