A new style serial driver for the Freescale ColdFire UART to replace
the old style one currently in the tree (drivers/serial/mcfserial.c).

Currently this UART is only found in the ColdFire CPU family of parts
(thus I prefixed this patch [M68KNOMMU]).

This has been around for a long while now, tested on all available
platforms.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Improve the readability of mii_do_cmd().
Signed-off-by: NPhilippe De Muyter <phdm@macqel.be>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Indent all the `else' the same way.
Remove some unecesary white space.
Signed-off-by: NPhilippe De Muyter <phdm@macqel.be>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ztxdone is jumped to even if tty is NULL and tty_wakeup placed after
this label doesn't expect NULLed parameter, so this will cause an oops
in some situations (why they scheduled a wakeup there before remove
bottom half processing patch?).

wakeup only in the case when we have non-null tty struct.

Spotted by Adrian Bunk.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ops_complete_biofill() runs outside of spin_lock(&sh->lock) and clears the
'pending' and 'ack' bits.  Since the test_and_ack_op() macro only checks
against 'complete' it can get an inconsistent snapshot of pending work.

Move the clearing of these bits to handle_stripe5(), under the lock.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Tested-by: NJoel Bertrand <joel.bertrand@systella.fr>
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: Stable <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As page->index is unsigned, this all becomes an unsigned comparison,
which almost always returns an error.
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: Stable <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch solves kernel deadlock issue seen on JFFF2 simultaneous 
operations. Detailed investigation of the issue showed that the kernel 
deadlock is caused by tons of recursive get_chip calls.
Signed-off-by: NAlexey Korolev <akorolev@infradead.org>
Acked-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

arch/parisc/kernel/pci-dma.c: In function 'pa11_dma_map_sg':
arch/parisc/kernel/pci-dma.c:487: error: 'struct scatterlist' has no member named 'page'
arch/parisc/kernel/pci-dma.c: In function 'pa11_dma_unmap_sg':
arch/parisc/kernel/pci-dma.c:508: error: 'struct scatterlist' has no member named 'page'
arch/parisc/kernel/pci-dma.c:508: error: 'struct scatterlist' has no member named 'page'
arch/parisc/kernel/pci-dma.c: In function 'pa11_dma_sync_sg_for_cpu':
arch/parisc/kernel/pci-dma.c:535: error: 'struct scatterlist' has no member named 'page'
arch/parisc/kernel/pci-dma.c:535: error: 'struct scatterlist' has no member named 'page'
arch/parisc/kernel/pci-dma.c: In function 'pa11_dma_sync_sg_for_device':
arch/parisc/kernel/pci-dma.c:545: error: 'struct scatterlist' has no member named 'page'
arch/parisc/kernel/pci-dma.c:545: error: 'struct scatterlist' has no member named 'page'
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

git-drivers/ide/ide-probe.c: In function 'hwif_init':
drivers/ide/ide-probe.c:1327: error: implicit declaration of function
'sg_init_table'
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Based on initial patch from Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Fix fallout from 18dabf47:

In file included from include/linux/dma-mapping.h:52,
                 from drivers/base/dma-mapping.c:10:
include/asm/dma-mapping.h: In function 'dma_map_sg':
include/asm/dma-mapping.h:288: error: 'struct scatterlist' has no member named 'page'
include/asm/dma-mapping.h:288: error: 'struct scatterlist' has no member named 'page'
include/asm/dma-mapping.h:288: error: 'struct scatterlist' has no member named 'page'
include/asm/dma-mapping.h:289: error: 'struct scatterlist' has no member named 'page'
include/asm/dma-mapping.h:290: error: 'struct scatterlist' has no member named 'page'
include/asm/dma-mapping.h: In function 'dma_sync_sg_for_cpu':
include/asm/dma-mapping.h:331: error: 'struct scatterlist' has no member named 'page'

drivers/scsi/ps3rom.c: In function 'fetch_to_dev_buffer':
drivers/scsi/ps3rom.c:150: error: 'struct scatterlist' has no member named 'page'
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

More fallout from sg_page changes:

drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf_user1':
drivers/infiniband/hw/ehca/ehca_mrmw.c:1779: error: 'struct scatterlist' has no member named 'page'
drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_check_kpages_per_ate':
drivers/infiniband/hw/ehca/ehca_mrmw.c:1835: error: 'struct scatterlist' has no member named 'page'
drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf_user2':
drivers/infiniband/hw/ehca/ehca_mrmw.c:1870: error: 'struct scatterlist' has no member named 'page'
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Jes complains that page table code still uses lgread_u32 even though
it now uses general kernel pte types.  The best thing to do is to
generalize lgread_u32 and lgwrite_u32.

This means we lose the efficiency of getuser().  We could potentially
regain it if we used __copy_from_user instead of copy_from_user, but
I'm not certain that our range check is equivalent to access_ok() on
all platforms.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NJes Sorensen <jes@sgi.com>

This makes lguest able to use the virtio devices.

We change the device descriptor page from a simple array to a variable
length "type, config_len, status, config data..." format, and
implement virtio_config_ops to read from that config data.

We use the virtio ring implementation for an efficient Guest <-> Host
virtqueue mechanism, and the new LHCALL_NOTIFY hypercall to kick the
host when it changes.

We also use LHCALL_NOTIFY on kernel addresses for very very early
console output.  We could have another hypercall, but this hack works
quite well.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This patch gets rid of the old lguest host I/O infrastructure and
replaces it with a single hypercall "LHCALL_NOTIFY" which takes an
address.

The main change is the removal of io.c: that mainly did inter-guest
I/O, which virtio doesn't yet support.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This gets rid of the lguest bus, drivers and DMA mechanism, to make
way for a generic virtio mechanism.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

These helper routines supply most of the virtqueue_ops for hypervisors
which want to use a ring for virtio.  Unlike the previous lguest
implementation:

1) The rings are variable sized (2^n-1 elements).
2) They have an unfortunate limit of 65535 bytes per sg element.
3) The page numbers are always 64 bit (PAE anyone?)
4) They no longer place used[] on a separate page, just a separate
   cacheline.
5) We do a modulo on a variable.  We could be tricky if we cared.
6) Interrupts and notifies are suppressed using flags within the rings.

Users need only get the ring pages and provide a notify hook (KVM
wants the guest to allocate the rings, lguest does it sanely).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Dor Laor <dor.laor@qumranet.com>

This adds the logic to convert the virtio ids into module aliases, and
includes a modalias entry in sysfs and the env var to make probing work.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This is an hvc-based virtio console driver.  It's suboptimal becuase
hvc expects to have raw access to interrupts and virtio doesn't assume
that, so it currently polls.

There are two solutions: expose hvc's "kick" interface, or wean off hvc.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The block driver uses scatter-gather lists with sg[0] being the
request information (struct virtio_blk_outhdr) with the type, sector
and inbuf id.  The next N sg entries are the bio itself, then the last
sg is the status byte.  Whether the N entries are in or out depends on
whether it's a read or a write.

We accept the normal (SCSI) ioctls: they get handed through to the other
side which can then handle it or reply that it's unsupported.  It's
not clear that this actually works in general, since I don't know
if blk_pc_request() requests have an accurate rq_data_dir().

Although we try to reply -ENOTTY on unsupported commands, ioctl(fd,
CDROMEJECT) returns success to userspace.  This needs a separate
patch.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <jens.axboe@oracle.com>

The network driver uses two virtqueues: one for input packets and one
for output packets.  This has nice locking properties (ie. we don't do
any for recv vs send).

TODO:
	1) Big packets.
	2) Multi-client devices (maybe separate driver?).
	3) Resolve freeing of old xmit skbs (Christian Borntraeger)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: netdev@vger.kernel.org

This attempts to implement a "virtual I/O" layer which should allow
common drivers to be efficiently used across most virtual I/O
mechanisms.  It will no-doubt need further enhancement.

The virtio drivers add buffers to virtio queues; as the buffers are consumed
the driver "interrupt" callbacks are invoked.

There is also a generic implementation of config space which drivers can query
to get setup information from the host.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Dor Laor <dor.laor@qumranet.com>
Cc: Arnd Bergmann <arnd@arndb.de>

1) This allows us to get alot closer to booting bzImages.

2) It means we don't have to know page_offset.

3) The Guest needs to modify the boot pagetables to create the
   PAGE_OFFSET mapping before jumping to C code.

4) guest_pa() walks the page tables rather than using page_offset.

5) We don't use page_offset to figure out whether to emulate: it was
   always kinda quesationable, and won't work for instructions done
   before remapping (bzImage unpacking in particular).

6) We still want the kernel address for tlb flushing: have the initial
   hypercall give us that, too.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

(Based on Ron Minnich's LGUEST_PLAN9_SYSCALL patch).

This patch allows Guests to specify what system call vector they want,
and we try to reserve it.  We only allow one non-Linux system call
vector, to try to avoid DoS on the Host.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This is my first step in the migration of page_tables.c to the kernel
types and functions/macros (2.6.23-rc3).  Seems to be working OK.
Signed-off-by: NMatias Zabaljauregui <matias.zabaljauregui@cern.ch>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Move setup_regs() to lguest_arch_setup_regs() in i386_core.c given
that this is very architecture specific.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Apply Clue 2x4 to lguest userland<->kernel handling code and the
lguest launcher. Pointers are not to be passed in u32's!

Basic rule of thumb: Anything passing u32's back and forth should be
passing unsigned longs to be portable to 64 bit archs.

For those who forgotten already, I repeat: NO POINTERS IN u32!
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Clean up the hypercall code to make the code in hypercalls.c
architecture independent. First process the common hypercalls and
then call lguest_arch_do_hcall() if the call hasn't been handled.
Rename struct hcall_ring to hcall_args.

This patch requires the previous patch which reorganize the layout of
struct lguest_regs on i386 so they match the layout of struct
hcall_args.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Currently we look at the "trapnum" to see if the Guest wants a
hypercall.  But once the hypercall is done we have to reset trapnum to
a bogus value, otherwise if we exit to userspace and return, we'd run
the same hypercall twice (that was a nasty bug to find!).

This has two main effects:

1) When Jes's patch changes the hypercall args to be a generic "struct
   hcall_args" we simply change the type of "lg->hcall".  It's set by
   arch code, so if it has to copy args or something it can do so, and
   point "hcall" into lg->arch somewhere.

2) Async hypercalls only get run when an actual hypercall is pending.
   This simplfies the code a little and is a more logical semantic.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Move eax next to ebx/ecx/edx in struct lguest_regs on i386, so they
will be located together and allow it to map directly to a struct
hcall_ring entry (which will be renamed struct hcall_args as in a
subsequent patch).

This is in preparation for making the code hcall code architecture
independent.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Separate i386 architecture specific from core.c and move it to
x86/core.c and add x86/lguest.h header file to match.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This simplifies the code a little, in preparation for allowing
alternate system call vectors in guests (Plan 9 uses 0x40).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Back when we had all the Guest state in the switcher, we had a fixed
array of them.  This is no longer necessary.

If we switch the network code to using random_ether_addr (46 bits is
enough to avoid clashes), we can get rid of the concept of "guest id"
altogether.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

In order to avoid problematic special linking of the Launcher, we give
the Host an offset: this means we can use any memory region in the
Launcher as Guest memory rather than insisting on mmap() at 0.

The result is quite pleasing: a number of casts are replaced with
simple additions.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

lguest uses a "switcher" shim mapped high to bounce between host and
guest.  As lguest becomes less i386-centric, we separate this code
into a subdir.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Lguest has two sides: host support (to launch guests) and guest
support (replacement boot path and paravirt_ops).  This moves the
guest side to arch/x86/lguest where it's closer to related code.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>

Currently lguest will spend a lot of of time waking up the host, as it
cannot go tickless (if the [host] TSC has been marked unstable). On my
laptop I was getting ~40% of wakeups from lguest.

With this patch applied, my laptop is much happier!
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>