Don't touch the non DMA members in the sg list in dma_map_sg in the IOMMU

Some drivers (in particular ST) ran into problems because they reused the sg
lists after passing them to pci_map_sg().  The merging procedure in the K8
GART IOMMU corrupted the state.  This patch changes it to only touch the dma*
entries during merging, but not the other fields.  Approach suggested by Dave
Miller.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We found a problem with x86_64 kernels with preemption enabled, where
having multiple tasks doing ptrace singlesteps around the same time will
cause the system to 'oops'.  The problem seems that a task can get
preempted out of the do_debug() processing while it is running on the
DEBUG_STACK stack.  If another task on that same cpu then enters do_debug()
and uses the same per-cpu DEBUG_STACK stack, the previous preempted tasks's
stack contents can be corrupted, and the system will oops when the
preempted task is context switched back in again.

The typical oops looks like the following:

  Unable to handle kernel paging request at ffffffffffffffae RIP: <ffffffff805452a1>{thread_return+34}
  PGD 103027 PUD 102429067 PMD 0
  Oops: 0002 [1] PREEMPT SMP
  CPU 0
  Modules linked in:
  Pid: 3786, comm: ssdd Not tainted 2.6.15.2 #1
  RIP: 0010:[<ffffffff805452a1>] <ffffffff805452a1>{thread_return+34}
  RSP: 0018:ffffffff80824058  EFLAGS: 000136c2
  RAX: ffff81017e12cea0 RBX: 0000000000000000 RCX: 00000000c0000100
  RDX: 0000000000000000 RSI: ffff8100f7856e20 RDI: ffff81017e12cea0
  RBP: 0000000000000046 R08: ffff8100f68a6000 R09: 0000000000000000
  R10: 0000000000000000 R11: ffff81017e12cea0 R12: ffff81000c2d53e8
  R13: ffff81017f5b3be8 R14: ffff81000c0036e0 R15: 000001056cbfc899
  FS:  00002aaaaaad9b00(0000) GS:ffffffff80883800(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: ffffffffffffffae CR3: 00000000f6fcf000 CR4: 00000000000006e0
  Process ssdd (pid: 3786, threadinfo ffff8100f68a6000, task ffff8100f7856e20)
  Stack: ffffffff808240d8 ffffffff8012a84a ffff8100055f6c00 0000000000000020
         0000000000000001 ffff81000c0036e0 ffffffff808240b8 0000000000000000
         0000000000000000 0000000000000000
  Call Trace: <#DB>
	<ffffffff8012a84a>{try_to_wake_up+985}
	<ffffffff8012c0d3>{kick_process+87}
        <ffffffff8013b262>{signal_wake_up+48}
	<ffffffff8013b5ce>{specific_send_sig_info+179}
        <ffffffff80546abc>{_spin_unlock_irqrestore+27}
	<ffffffff8013b67c>{force_sig_info+159}
        <ffffffff801103a0>{do_debug+289} <ffffffff80110278>{sync_regs+103}
        <ffffffff8010ed9a>{paranoid_userspace+35}
  Unable to handle kernel paging request at 00007fffffb7d000 RIP: <ffffffff8010f2e4>{show_trace+465}
  PGD f6f25067 PUD f6fcc067 PMD f6957067 PTE 0
  Oops: 0000 [2] PREEMPT SMP

This patch disables preemptions for the task upon entry to do_debug(), before
interrupts are reenabled, and then disables preemption before exiting
do_debug(), after disabling interrupts.  I've noticed that the task can be
preempted either at the end of an interrupt, or on the call to
force_sig_info() on the spin_unlock_irqrestore() processing.  It might be
better to attempt to code a fix in entry.S around the code that calls
do_debug().
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The orinoco wireless driver can support the SMC 2532W-B PC Card, so add the
id for it.
Signed-off-by: NJesse Allen <the3dfxdude@gmail.com>
Cc: Pavel Roskin <proski@gnu.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Unfortunately, the reiserfs_attrs_cleared bit in the superblock flag can
lie.  File systems have been observed with the bit set, yet still contain
garbage in the stat data field, causing unpredictable results.

This patch backs out the enable-by-default behavior.

It eliminates the changes from: d50a5cd860ce721dbeac6a4f3c6e42abcde68cd8,
and ef5e5414e7a83eb9b4295bbaba5464410b11e030.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

net/bridge/br_netfilter.c: In function `br_nf_post_routing':
net/bridge/br_netfilter.c:808: warning: implicit declaration of function `has_bridge_parent'
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Cc: Harald Welte <laforge@netfilter.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add fstatat64 support to s390 in order to follow changes with
commit cff2b760 .
Also fixes compilation for 31 bit.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update the module version defines.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Put all code for showing the card's boot info in
one sub-routine.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Rename get_support function to pcwd_check_temperature_support
so that it is clearer what the function does.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add Control Status #2 bits (with defines)
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

more private data of the card to one struct.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

When doing a __devexit from a card we should also
decrement the cards_found counter.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

add extra comments for the include files
changes spaces by tabs where it is appropriate.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The following makes drivers/char/watchdog/sa1100_wdt.c sparse clean.
(similar to the other watchdog drivers)
Signed-off-by: NIan Campbell <icampbell@arcom.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

drivers/video/fbmem.c:1567: warning: 'video_setup' defined but not used
Acked-by: N"Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for Geforce4 MX 4000 (0x185)
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The BUS_I2C option is neither available (since there is no VISWS option in
the kernel) nor does it have any effect - so why not remove it?

Based on a report by Jean-Luc Leger <reiga@dspnet.fr.eu.org>.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- tipar_open(): fix unsigned comparison

- tipar_open(): don't permit NULL pardevice (probably unneeded given the
  above fix).

- tipar_init_module(): handle the situation where parport_register_driver()
  failed to register any devices (parport_register_driver() drops the ->attach
  return value on the floor).

  This probably makes fixes #1 and #2 unneeded.

- tipar_init_module(): fix various error-path resource leaks.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Right now in __constant_test_bit for the s390 there is an extra set of ()
surrounding the calculation.  This patch simply removes one set of () that is
surrounding the whole clause.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Based on a patch from Maximilian Attems <maks@sternwelten.at> .  Nothing in
asm-s390/setup.h is of interest for user space.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for unshare system call.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add missing smp_cpu_not_running define to avoid build warnings in the non smp
case.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update URL for s390 and add maintainers for s390 networking and zfcp driver.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initiliazing of cpu_possible_map was done in smp_prepare_cpus which is way too
late.  Therefore assign a static value to cpu_possible_map, since we don't
have access to max_cpus in setup_arch.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When the sclp interface takes very long to serve a request, the sclp core
driver will report a failed request to the sclp tty driver even though the
request is still being processed by the sclp interface.  Eventually the sclp
interface completes the request and updates some fields in the request buffer
which leads to a corrupted tty pages list.  The next time function
sclp_tty_write_room is called, the corrupted list will be traversed, resulting
in an oops.

To avoid this remove the busy retry limit and increase retry intervals.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Switch on CONFIG_DEBUG_FS again.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix locking in __chp_add() and s390_subchannel_remove_chpid(): Need to
disable/enable because they are always called from a thread (and not
directly from a machine check...)
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Lost a few hours debugging an early-bootup fault within printk itself,
which manifested itself as a hard to debug early hang.

This patch makes it much easier by printing out early faults via
early_printk(), which function is a lot simpler than a full printk, and
hence more likely to succeed in emergencies.  (We do not recover from early
faults anyway, so there's no loss from not having these messages in the
normal printk buffer.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This puts the variables and the way to get to reclaim_mapped in one block.
And allows zone_reclaim or other things to skip the determination (maybe
this whole block of code does not belong into refill_inactive_zone()?)
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

shrink_zone() already increments reclaim_in_progress.  No need to do it in
balance_pgdat.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

shrink_list() and refill_inactive() check all ptes pointing to a page for
reference bits in order to decide if the page should be put on the active
list.  This is not necessary for zone_reclaim since we are only interested
in removing unmapped pages.  Skip the checks in both functions.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With David Woodhouse <dwmw2@infradead.org>

select() presently has a habit of increasing the value of the user's
`timeout' argument on return.

We were writing back a timeout larger than the original.  We _deliberately_
round up, since we know we must wait at _least_ as long as the caller asks
us to.

The patch adds a couple of helper functions for magnitude comparison of
timespecs and of timevals, and uses them to prevent the various poll and
select functions from returning a timeout which is larger than the one which
was passed in.

The patch also fixes a bug in compat_sys_pselect7(): it was adding the new
timeout value to the old one and was returning that.  It should just return
the new timeout value.

(We have various handy timespec/timeval-to-from-nsec conversion functions in
time.h.  But this code open-codes it all).

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andi Kleen <ak@muc.de>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: george anzinger <george@mvista.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[description from AK]

The IBM Summit 3 chipset doesn't implement the HPET timer replacement
option.  Since the current Linux code relies on it use a mixed mode with
both PIT for the interrupt and HPET counters for the time keeping.  That
was already implemented, but didn't work properly because it was still
using the last interrupt offset in HPET.  This resulted in x460 not
booting.  Fix this up by using the free running HPET counter.

Shouldn't affect any other machine because they either use full HPET mode
or no HPET at all.

TBD needs a similar 32bit fix.
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Cc: Bob Picco <bob.picco@hp.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NMatt Waddel <Matt.Waddel@freescale.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The *at patches introduced fstatat and, due to inusfficient research, I
used the newfstat functions generally as the guideline.  The result is that
on 32-bit platforms we don't have all the information needed to implement
fstatat64.

This patch modifies the code to pass up 64-bit information if
__ARCH_WANT_STAT64 is defined.  I renamed the syscall entry point to make
this clear.  Other archs will continue to use the existing code.  On x86-64
the compat code is implemented using a new sys32_ function.  this is what
is done for the other stat syscalls as well.

This patch might break some other archs (those which define
__ARCH_WANT_STAT64 and which already wired up the syscall).  Yet others
might need changes to accomodate the compatibility mode.  I really don't
want to do that work because all this stat handling is a mess (more so in
glibc, but the kernel is also affected).  It should be done by the arch
maintainers.  I'll provide some stand-alone test shortly.  Those who are
eager could compile glibc and run 'make check' (no installation needed).

The patch below has been tested on x86 and x86-64.
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Ben Dooks

Define the bits for the two board control latches
that control various items on the H1940 iPAQ.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>