Remove the error handling of bridge_node because the bridge_node is
optional.

For example, In case of Exynos SoC, a bridge device such as mDNIe and
MIC could be placed between Display Controller and MIPI DSI device but
the bridge device is optional.
Signed-off-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

It doesn't need to try to find a bridge if bridge node doesn't exist.
Reviewed-by: NShuah Khan <shuahkh@osg.samsung.com>
Tested-by: NShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

DSIM uses MIC bridge which is between DECON and DSIM, so the driver
should expect bridge node on input side.

Fixes: 86418f90 ("drm: convert drivers to use of_graph_get_remote_node")
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Since bridge node is referenced during in the probe, it should be
released on removal.
Suggested-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The dsi + panel is a parental relationship, so OF grpah is not needed.
Therefore, the current dsi_parse_dt function will throw an error,
because there is no linked OF graph for the case fimd + dsi + panel.

Parse the Pll burst and esc clock frequency properties in dsi_parse_dt()
and create a bridge_node only if there is an OF graph associated with dsi.
Signed-off-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Convert drivers to use the new of_graph_get_remote_node() helper
instead of parsing the endpoint node and then getting the remote device
node. Now drivers can just specify the device node and which
port/endpoint and get back the connected remote device node. The details
of the graph binding are nicely abstracted into the core OF graph code.

This changes some error messages to debug messages (in the graph core).
Graph connections are often "no connects" depending on the particular
board, so we want to avoid spurious messages. Plus the kernel is not a
DT validator.
Signed-off-by: NRob Herring <robh@kernel.org>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Tested-by: NLiviu Dudau <liviu.dudau@arm.com>
Tested-by: NEric Anholt <eric@anholt.net>
Tested-by: NJyri Sarha <jsarha@ti.com>
Tested by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>

DSI forwards te-gpios interrupts to display controller, but if display
controller works in HW-TRIGGER mode this interrupt is not necessary.
Making te-gpios property optional allows to avoid generating spare
interrupts.
And also if panel device node of command mode panel device doesn't provide
te-gpios property then the panel driver failed to probe. This was a critial
issue.

With this patch we can not only get rid of 60 interrupt callbacks per second
but also fix the critial issues.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Printing raw kernel pointers might reveal information which sometimes we
try to hide (e.g. with Kernel Address Space Layout Randomization).  Use
the "%pK" format so these pointers will be hidden for unprivileged
users.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Support for Exynos4415 is going away because there are no internal nor
external users.

Since commit 46dcf0ff ("ARM: dts: exynos: Remove exynos4415.dtsi"),
the platform cannot be instantiated so remove also the drivers.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Acked-by: NKukjin Kim <kgene@kernel.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The drm driver .load() operation is prone to race conditions as it
initializes the driver after registering the device nodes. Its usage is
deprecated, inline it in the probe function and call drm_dev_alloc() and
drm_dev_register() explicitly.

For consistency inline the .unload() handler in the remove function as
well.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Acked-by: NInki Dae <inki.dae@samsung.com>

Instead of linking encoders and bridges in every driver (and getting it
wrong half of the time, as many drivers forget to set the drm_bridge
encoder pointer), do so in core code. The drm_bridge_attach() function
needs the encoder and optional previous bridge to perform that task,
update all the callers.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Stefan Agner <stefan@agner.ch> # For DCU
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # For atmel-hlcdc
Acked-by: Vincent Abriou <vincent.abriou@st.com> # For STI
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # For sun4i
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> # For hisilicon
Acked-by: Jyri Sarha <jsarha@ti.com> # For tilcdc
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com

We have 1:1 relationship between connectors and encoders and the driver
is relying on the atomic helpers: we can drop the custom ->best_encoder()
implementations and let the core call drm_atomic_helper_best_encoder()
for us.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-5-git-send-email-boris.brezillon@free-electrons.com

This allows to remove the local of_graph_get_port_by_reg(),
of_graph_get_endpoint_by_reg(), and of_get_child_by_name_reg()
functions.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NInki Dae <inki.dae@samsung.com>

Simplify code by replacing custom code by generic helper and add missing
const qualifier to driver data structures.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Core provides generic helper to create DSI packet, use it instead of
custom code.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

All global variables are read only.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Functions are preferred over macros as more type-safe.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch supports mipi dsi for exynos5422. The dsi register
offsets of the exynos5422 are similar with exynos5433. However,
the values of the registers are quite different from the
exynos5433. For example, the exynos5422 uses sw reset like
previous chips.
Signed-off-by: NChanho Park <chanho61.park@samsung.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch fixes issue introduced by commit
cf67cc9a ("drm/exynos: remove struct
exynos_drm_display"), which removed assigning of drm bridge to drm
encoder. Lack of it caused that no bridge callbacks were called on
encoder enable/disable actions.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

This patch set nukes all the dummy mode_fixup implementations.

(made on top of Daniel topic/drm-misc branch)
Signed-off-by: NCarlos Palminha <palminha@synopsys.com>
[danvet: Squash in 2nd exynos patch.]
Link: http://patchwork.freedesktop.org/patch/msgid/3768b670931572de51fca1102efa18d20dd770ee.1455540137.git.palminha@synopsys.com
Link: http://patchwork.freedesktop.org/patch/msgid/4906a9925eebbe55489b1005c449b426a61c09bd.1455540137.git.palminha@synopsys.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch fixes issue introduced by commit
cf67cc9a ("drm/exynos: remove struct
exynos_drm_display"), which removed assigning of drm bridge to drm
encoder. Lack of it caused that no bridge callbacks were called on
encoder enable/disable actions.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The newly added runtime-pm support for exynos-drm encloses the
pm functions in an #ifdef, but not the functions that are called
from them and nowhere else, which produces warnings:

drm/exynos/exynos_drm_dsi.c:733:13: warning: 'exynos_dsi_disable_clock' defined but not used [-Wunused-function]
 static void exynos_dsi_disable_clock(struct exynos_dsi *dsi)
             ^
drm/exynos/exynos_drm_dsi.c:1291:13: warning: 'exynos_dsi_disable_irq' defined but not used [-Wunused-function]
 static void exynos_dsi_disable_irq(struct exynos_dsi *dsi)
             ^

This removes the #ifdef and instead marks the functions as
__maybe_unused, so gcc can silently discard them and all called
functions when CONFIG_PM is disabled.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/exynos/exynosdrm.ko:
-.text                       125792
+.text                       125788
-.rodata                      10972
+.rodata                      11748
-.data                         6720
+.data                         5944
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-19-git-send-email-boris.brezillon@free-electrons.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch makes it to return -EINVAL instead of -ENXIO
when getting a port or remote node failed.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>

This patch adds runtime pm interfaces to dsi driver.

Each sub driver should control not only its own clocks and
regulator but also its power domain.

For this, it removes existing exynos_dsi_poweron/poweroff interfaces
and uses runtime pm interfaces instead.
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.

@@
identifier dev, encoder, funcs;
@@
 int drm_encoder_init(struct drm_device *dev,
                      struct drm_encoder *encoder,
                      const struct drm_encoder_funcs *funcs,
                      int encoder_type
+                     ,const char *name, int DOTDOTDOT
                      )
{ ... }

@@
identifier dev, encoder, funcs;
@@
 int drm_encoder_init(struct drm_device *dev,
                      struct drm_encoder *encoder,
                      const struct drm_encoder_funcs *funcs,
                      int encoder_type
+                     ,const char *name, int DOTDOTDOT
                      );

@@
expression E1, E2, E3, E4;
@@
 drm_encoder_init(E1, E2, E3, E4
+                 ,NULL
                  )

v2: Add ', or NULL...' to @name kernel doc (Jani)
    Annotate the function with __printf() attribute (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com

struct exynos_drm_encoder was justing wrapping struct drm_encoder, it had
only a drm_encoder member and the internal exynos_drm_encoders ops that
was directly mapped to the drm_encoder helper funcs.

So now exynos DRM uses struct drm_encoder directly, this removes
completely the struct exynos_drm_encoder.

v2: add empty .mode_fixup() and .mode_set() to DSI and DPI to avoid null
pointer.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This functions was just hiding the encoder and connector creation in
a way that was less clean than if we get rid of it. For example,
exynos_encoder ops had .create_connector() defined only because we were
handing off the encoder and connector creation to
exynos_drm_create_enc_conn(). Without this function we can directly call
the create_connector function internally in the code, without the need of
any vtable access.

It also does some refactoring in the code like creating a bind function
for dpi devices.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This struct was just representing encoder information, it was a member of
struct exynos_drm_encoder, so any code trying to access encoder data would
have to go through the encoder struct, get the display struct and then get
the data it want.

During this patchset we also realized that the only data
exynos_drm_encoder needs to store is the drm_encoder parent and the
exynos_drm_encoder_ops.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The DRM Core doesn't have a dpms() operation anymore, everything
now is enable() or disable().
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

On some board, TE GPIO should be configured properly thoughout pinctrl driver
as an wakeup interrupt. So this gpio should be configurable in the board's DT,
not being requested as a input pin.
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

MIC must be initilized by MIPI DSI when it is being bound.
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds support for Exynos5433 mipi dsi.
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch make the driver to use an array for clock access. The number
of clocks are different from the existing MIPI DSI driver and Exynos5433
MIPI DSI driver. So this patch is needed before adding support for
Exynos5433 MIPI DSI driver.
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Exynos MIPI DSI driver uses some static values such as address offsets,
register setting values, and etc. This patch makes the driver get those
values from the driver data.
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds macros for register writing/reading. This is needed for
adding support Exynos5433 MIPI DSI driver, not by using if statement, but
by using driver data.
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch renames pll_clk to sclk_clk. The clock referenced by pll_clk
is actually not the pll input clock for dsi. The pll input clock comes
from the board's oscillator directly. But for the backward
compatibility, the old clock name "pll_clk" is also OK.
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

exynos_dsi_host_transfer() can be called through a panel driver while
DSI is turning down. It is possible because the function checks only
whether DSI is initialized or not, and there is a moment which DSI is
set by uninitialized, but DSI is still turning down. To prevent it,
DSI must be set by disabled before starting to be turned down, and
exynos_dsi_host_transfer() must check whether DSI is enabled or not.

Kernel dump:
[ 4721.351448] Unhandled fault: synchronous external abort (0x96000210) at 0xffffff800015e018
[ 4721.351809] Internal error: : 96000210 [#1] PREEMPT SMP
[ 4721.352031] Modules linked in:
[ 4721.352173] CPU: 2 PID: 300 Comm: deviced Tainted: G        W       4.0.4-01017-g7964a87 #1
[ 4721.353989] Hardware name: Samsung DRACO board (DT)
[ 4721.358852] task: ffffffc0a0b70000 ti: ffffffc0a00ec000 task.ti: ffffffc0a00ec000
[ 4721.366327] PC is at exynos_dsi_enable_lane+0x14/0x5c
[ 4721.371353] LR is at exynos_dsi_host_transfer+0x834/0x8d8
[ 4721.376731] pc : [<ffffffc000432bcc>] lr : [<ffffffc000434590>] pstate: 60000145
[ 4721.384107] sp : ffffffc0a00efbe0
[ 4721.387405] x29: ffffffc0a00efbe0 x28: ffffffc0a00ec000
[ 4721.392699] x27: ffffffc000968000 x26: 0000000000000040
[ 4721.397994] x25: ffffffc000f74dc0 x24: ffffffc0a00efec8
[ 4721.403290] x23: ffffffc0a4815400 x22: ffffffc0009f2729
[ 4721.408584] x21: ffffffc0a00efcc8 x20: ffffffc0a4a2a848
[ 4721.413879] x19: ffffffc0a4a2a818 x18: 0000000000000004
[ 4721.419173] x17: 0000007faa5cddf0 x16: ffffffc0001a40a8
[ 4721.424469] x15: 0000000000000009 x14: 000000000000000d
[ 4721.429762] x13: 6e6e6f63206b726f x12: 0000000000000010
[ 4721.435058] x11: 0101010101010101 x10: 0000000000000000
[ 4721.440353] x9 : 000000000000000a x8 : 8386838282818381
[ 4721.445648] x7 : ffffffc0a201efe8 x6 : 0000000000000000
[ 4721.450943] x5 : 00000000fffffffa x4 : ffffffc0a201f170
[ 4721.456237] x3 : ffffff800015e000 x2 : ffffff800015e018
[ 4721.461531] x1 : 000000000000000f x0 : ffffffc0a4a2a818
[ 4721.466826]
[ 4721.468305] Process deviced (pid: 300, stack limit = 0xffffffc0a00ec028)
[ 4721.474989] Stack: (0xffffffc0a00efbe0 to 0xffffffc0a00f0000)
[ 4721.480720] fbe0: a00efca0 ffffffc0 0042c944 ffffffc0 a0f2d680 ffffffc0 00000024 00000000
[ 4721.488895] fc00: a4b6d000 ffffffc0 009f2729 ffffffc0 a4815400 ffffffc0 a00efec8 ffffffc0
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

In case there are multiple pipelines and deferred probe occurs, only components
of the first pipeline were bound. As a result only one pipeline was available.
The main cause of this issue was dynamic generation of component match table -
every component driver during probe registered itself on helper list, if there
was at least one pipeline present on this list component match table were
created without deferred components.
This patch removes this helper list, instead it creates match table from
existing devices requiring exynos_drm KMS drivers. This way match table do not
depend on probe/deferral order and contains all KMS components.
As a side effect patch makes the code cleaner and significantly smaller.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Run dpms operations through the atomic intefaces. This basically removes
the .dpms() callback from econders and crtcs and use .disable() and
.enable() to turn the crtc on and off.

v2: Address comments by Joonyoung:
	- make hdmi code call ->disable() instead of ->dpms()
	- do not use WARN_ON on crtc enable/disable

v3: - Fix build failure after the hdmi change in v2
    - Change dpms helper of ptn3460 bridge

v4: - remove win_commit() call from .enable()

v5: - move .atomic_check() to the atomic PageFlip patch, and transform it
in .atomic_begin()
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>