- 03 11月, 2015 8 次提交
-
-
由 Eliad Peller 提交于
Scheduled scan has to be reconfigured only if wowlan wasn't configured, since otherwise it should continue to run (with the 'any' trigger) or be aborted. The current code will end up asking the driver to start a new scheduled scan without stopping the previous one, and leaking some memory (from the previous request.) Fix this by doing the abort/restart under the proper conditions. Signed-off-by: NEliad Peller <eliadx.peller@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Eliad Peller 提交于
If drv_start() fails during hw_restart, all the running interfaces are being closed/stopped, which results in drv_stop() being called, although the driver was never started successfully. This might cause drivers to perform operations on uninitialized memory (as they assume it was initialized on drv_start) Consider the local->started flag, and call the driver's stop() op only if drv_start() succeeded before. Move drv_start() and drv_stop() to driver-ops.c, as they are no longer simple wrappers. Signed-off-by: NEliad Peller <eliadx.peller@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Andrei Otcheretianski 提交于
The recalc_smps work can run after the station disassociates. At this stage we already released the channel, but the work will be cancelled only when the interface stops. In this scenario we can hit the warning in ieee80211_recalc_smps, so just remove it. Signed-off-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Eliad Peller 提交于
Requesting hw restart during suspend might result in the restart work being executed after mac80211 and the hw are suspended. Solve the race by simply scheduling the restart work on a freezable workqueue. Note that there can be some cases of reconfiguration on resume (besides the hardware restart): * wowlan is not configured - All the interfaces removed were removed on suspend, and drv_stop() was called. At this point the driver shouldn't expect for hw_restart anyway, so we can simply cancel it (on resume). * wowlan is configured, drv_resume() == 1 There is no definitive expected behavior in this case, as each driver might have different expectations (e.g. setting some flags on suspend/restart vs. not handling spurious recovery). For now, simply let the hw_restart work run again after resume, and hope the driver will handle it well (or at least initiate another hw restart). Signed-off-by: NEliad Peller <eliadx.peller@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Andrei Otcheretianski 提交于
Local request to deauthenticate wasn't handled while associating, thus the association could continue even when the user space required to disconnect. Cc: stable@vger.kernel.org Signed-off-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Arik Nemtsov 提交于
In TDLS channel-switch operations the chandef can sometimes be NULL. Avoid an oops in the trace code for these cases and just print a chandef full of zeros. Cc: stable@vger.kernel.org Fixes: a7a6bdd0 ("mac80211: introduce TDLS channel switch ops") Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Ola Olsson 提交于
If parse_acl_data succeeds but the subsequent parsing of smps attributes fails, there will be a memory leak due to early returns. Fix that by moving the ACL parsing later. Cc: stable@vger.kernel.org Fixes: 18998c38 ("cfg80211: allow requesting SMPS mode on ap start") Signed-off-by: NOla Olsson <ola.olsson@sonymobile.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
In case of one shot NOA the interval can be 0, catch that instead of potentially (depending on the driver) crashing like this: divide error: 0000 [#1] SMP [...] Call Trace: <IRQ> [<ffffffffc08e891c>] ieee80211_extend_absent_time+0x6c/0xb0 [mac80211] [<ffffffffc08e8a17>] ieee80211_update_p2p_noa+0xb7/0xe0 [mac80211] [<ffffffffc069cc30>] ath9k_p2p_ps_timer+0x170/0x190 [ath9k] [<ffffffffc070adf8>] ath_gen_timer_isr+0xc8/0xf0 [ath9k_hw] [<ffffffffc0691156>] ath9k_tasklet+0x296/0x2f0 [ath9k] [<ffffffff8107ad65>] tasklet_action+0xe5/0xf0 [...] Cc: stable@vger.kernel.org [3.16+, due to d463af4a using it] Signed-off-by: NJanusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 22 10月, 2015 25 次提交
-
-
由 David S. Miller 提交于
Merge tag 'mac80211-next-for-davem-2015-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Here's another set of patches for the current cycle: * I merged net-next back to avoid a conflict with the * cfg80211 scheduled scan API extensions * preparations for better scan result timestamping * regulatory cleanups * mac80211 statistics cleanups * a few other small cleanups and fixes ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 yankejian 提交于
the global Soc configuration is treated by syscon, and sub ctrl bus is Soc bus. it has to be treated by syscon. Signed-off-by: Nyankejian <yankejian@huawei.com> Signed-off-by: Nlisheng <lisheng011@huawei.com> Signed-off-by: Nlipeng <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Hariprasad Shenai says: ==================== Trivial fixes for cxgb4 driver This patch series updates driver description for next gen. adapters, updates firmware info., returns error for setup_rss error case, restores L1 configuration in case of FW rejects new config, updates and aligns ethtool get stats settings, etc This patch series has been created against net-next tree and includes patches on cxgb4 and cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Update ethtool get_drvinfo to display regdump len and also update firmware string version print to display N/A in case FW isn't present Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
In the ethtool set_settings() routine we need to remember our old L1 Configuration in case the firmware rejects the request and then restore that. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
For {1, 10, 40} Gb/s. Prohibiting turning off autonegotiation isn't anywhere in the standard. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Align the ethtool get stats settings with the rest so it looks uniform Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
With use of lwtunnel, we can directly call dev_queue_xmit() rather than calling netdev vport send operation. Following change make tunnel vport code bit cleaner. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Patch fixes following sparse warning. net/openvswitch/flow_netlink.c:583:30: warning: incorrect type in assignment (different base types) net/openvswitch/flow_netlink.c:583:30: expected restricted __be16 [usertype] ipv4 net/openvswitch/flow_netlink.c:583:30: got int Fixes: 6b26ba3a ("openvswitch: netlink attributes for IPv6 tunneling") Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Alexei Starovoitov says: ==================== bpf_perf_event_output helper Over the last year there were multiple attempts to let eBPF programs output data into perf events by He Kuang and Wangnan. The last one was: https://lkml.org/lkml/2015/7/20/736 It was almost perfect with exception that all bpf programs would sent data into one global perf_event. This patch set takes different approach by letting user space open independent PERF_COUNT_SW_BPF_OUTPUT events, so that program output won't collide. Wangnan is working on corresponding perf patches. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
Performance test and example of bpf_perf_event_output(). kprobe is attached to sys_write() and trivial bpf program streams pid+cookie into userspace via PERF_COUNT_SW_BPF_OUTPUT event. Usage: $ sudo ./bld_x64/samples/bpf/trace_output recv 2968913 events per sec Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
This helper is used to send raw data from eBPF program into special PERF_TYPE_SOFTWARE/PERF_COUNT_SW_BPF_OUTPUT perf_event. User space needs to perf_event_open() it (either for one or all cpus) and store FD into perf_event_array (similar to bpf_perf_event_read() helper) before eBPF program can send data into it. Today the programs triggered by kprobe collect the data and either store it into the maps or print it via bpf_trace_printk() where latter is the debug facility and not suitable to stream the data. This new helper replaces such bpf_trace_printk() usage and allows programs to have dedicated channel into user space for post-processing of the raw data collected. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
Instead of WARN_ON in perf_event_output() on unpaded raw samples, pad them automatically. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brenden Blanco 提交于
In the ipv4 outbound path of an ipvlan device in l3 mode, the ifindex is being grabbed from dev_get_iflink. This works for the physical device case, since as the documentation of that function notes: "Physical interfaces have the same 'ifindex' and 'iflink' values.". However, if the master device is a veth, and the pairs are in separate net namespaces, the route lookup will fail with -ENODEV due to outer veth pair being in a separate namespace from the ipvlan master/routing namespace. ns0 | ns1 | ns2 veth0a--|--veth0b--|--ipvl0 In ipvlan_process_v4_outbound(), a packet sent from ipvl0 in the above configuration will pass fl.flowi4_oif == veth0a to ip_route_output_flow(), but *net == ns1. Notice also that ipv6 processing is not using iflink. Since there is a discrepancy in usage, fixup both v4 and v6 case to use local dev variable. Tested this with l3 ipvlan on top of veth, as well as with single physical interface in the top namespace. Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com> Reviewed-by: NJiri Benc <jbenc@redhat.com> Acked-by: NMahesh Bandewar <maheshb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Allowing an application to set whatever limit for the list of recently RST fastopen sessions [1] is not wise, as it open ways to deplete kernel memory. Cap the user provided limit by somaxconn sysctl, like listen() backlog. [1] https://tools.ietf.org/html/rfc7413#section-5.1Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
This header file only contains the platform data structure definition, so move it to the include/linux/platform_data/ directory. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Remove the inclusion of linux/mdio-gpio.h in nas4220b, wbd111 and wbd222 boards since mdio-gpio is not used. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wu Fengguang 提交于
drivers/net/ethernet/hisilicon/hns/hnae.c:442:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Tom Herbert added SIT support to GRO with commit 19424e05 ("sit: Add gro callbacks to sit_offload"), later reverted by Herbert Xu. The problem came because Tom patch was building GRO packets without proper meta data : If packets were locally delivered, we would not care. But if packets needed to be forwarded, GSO engine was not able to segment individual segments. With the following patch, we correctly set skb->encapsulation and inner network header. We also update gso_type. Tested: Server : netserver modprobe dummy ifconfig dummy0 8.0.0.1 netmask 255.255.255.0 up arp -s 8.0.0.100 4e:32:51:04:47:e5 iptables -I INPUT -s 10.246.7.151 -j TEE --gateway 8.0.0.100 ifconfig sixtofour0 sixtofour0 Link encap:IPv6-in-IPv4 inet6 addr: 2002:af6:798::1/128 Scope:Global inet6 addr: 2002:af6:798::/128 Scope:Global UP RUNNING NOARP MTU:1480 Metric:1 RX packets:411169 errors:0 dropped:0 overruns:0 frame:0 TX packets:409414 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20319631739 (20.3 GB) TX bytes:29529556 (29.5 MB) Client : netperf -H 2002:af6:798::1 -l 1000 & Checked on server traffic copied on dummy0 and verify segments were properly rebuilt, with proper IP headers, TCP checksums... tcpdump on eth0 shows proper GRO aggregation takes place. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
While testing my SIT/GRO patch using netfilter TEE module and a dummy device, I found some features were missing : TSO IPv6, UFO, and encapsulated traffic. ethtool -k dummy0 now gives : ... tcp-segmentation-offload: on tx-tcp-segmentation: on tx-tcp-ecn-segmentation: on tx-tcp6-segmentation: on udp-fragmentation-offload: on ... tx-gre-segmentation: on tx-ipip-segmentation: on tx-sit-segmentation: on tx-udp_tnl-segmentation: on Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arad, Ronen 提交于
if_nlmsg_size() overestimates the minimum allocation size of netlink dump request (when called from rtnl_calcit()) or the size of the message (when called from rtnl_getlink()). This is because ext_filter_mask is not supported by rtnl_link_get_af_size() and rtnl_link_get_size(). The over-estimation is significant when at least one netdev has many VLANs configured (8 bytes for each configured VLAN). This patch-set "rightsizes" the protocol specific attribute size calculation by propagating ext_filter_mask to rtnl_link_get_af_size() and adding this a argument to get_link_af_size op in rtnl_af_ops. Bridge module already used filtering aware sizing for notifications. br_get_link_af_size_filtered() is consistent with the modified get_link_af_size op so it replaces br_get_link_af_size() in br_af_ops. br_get_link_af_size() becomes unused and thus removed. Signed-off-by: NRonen Arad <ronen.arad@intel.com> Acked-by: NSridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 10月, 2015 7 次提交
-
-
由 Elad Raz 提交于
Configure ageing time to the HW for newly bridged device CC: Scott Feldman <sfeldma@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: NElad Raz <eladr@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NScott Feldman <sfeldma@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Yuchung Cheng says: ==================== RACK loss detection RACK (Recent ACK) loss recovery uses the notion of time instead of packet sequence (FACK) or counts (dupthresh). It's inspired by the FACK heuristic in tcp_mark_lost_retrans(): when a limited transmit (new data packet) is sacked in recovery, then any retransmission sent before that newly sacked packet was sent must have been lost, since at least one round trip time has elapsed. But that existing heuristic from tcp_mark_lost_retrans() has several limitations: 1) it can't detect tail drops since it depends on limited transmit 2) it's disabled upon reordering (assumes no reordering) 3) it's only enabled in fast recovery but not timeout recovery RACK addresses these limitations with a core idea: an unacknowledged packet P1 is deemed lost if a packet P2 that was sent later is is s/acked, since at least one round trip has passed. Since RACK cares about the time sequence instead of the data sequence of packets, it can detect tail drops when a later retransmission is s/acked, while FACK or dupthresh can't. For reordering RACK uses a dynamically adjusted reordering window ("reo_wnd") to reduce false positives on ever (small) degree of reordering, similar to the delayed Early Retransmit. In the current patch set RACK is only a supplemental loss detection and does not trigger fast recovery. However we are developing RACK to replace or consolidate FACK/dupthresh, early retransmit, and thin-dupack. These heuristics all implicitly bear the time notion. For example, the delayed Early Retransmit is simply applying RACK to trigger the fast recovery with small inflight. RACK requires measuring the minimum RTT. Tracking a global min is less robust due to traffic engineering pathing changes. Therefore it uses a windowed filter by Kathleen Nichols. The min RTT can also be useful for various other purposes like congestion control or stat monitoring. This patch has been used on Google servers for well over 1 year. RACK has also been implemented in the QUIC protocol. We are submitting an IETF draft as well. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
This patch implements the second half of RACK that uses the the most recent transmit time among all delivered packets to detect losses. tcp_rack_mark_lost() is called upon receiving a dubious ACK. It then checks if an not-yet-sacked packet was sent at least "reo_wnd" prior to the sent time of the most recently delivered. If so the packet is deemed lost. The "reo_wnd" reordering window starts with 1msec for fast loss detection and changes to min-RTT/4 when reordering is observed. We found 1msec accommodates well on tiny degree of reordering (<3 pkts) on faster links. We use min-RTT instead of SRTT because reordering is more of a path property but SRTT can be inflated by self-inflicated congestion. The factor of 4 is borrowed from the delayed early retransmit and seems to work reasonably well. Since RACK is still experimental, it is now used as a supplemental loss detection on top of existing algorithms. It is only effective after the fast recovery starts or after the timeout occurs. The fast recovery is still triggered by FACK and/or dupack threshold instead of RACK. We introduce a new sysctl net.ipv4.tcp_recovery for future experiments of loss recoveries. For now RACK can be disabled by setting it to 0. Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
This patch is the first half of the RACK loss recovery. RACK loss recovery uses the notion of time instead of packet sequence (FACK) or counts (dupthresh). It's inspired by the previous FACK heuristic in tcp_mark_lost_retrans(): when a limited transmit (new data packet) is sacked, then current retransmitted sequence below the newly sacked sequence must been lost, since at least one round trip time has elapsed. But it has several limitations: 1) can't detect tail drops since it depends on limited transmit 2) is disabled upon reordering (assumes no reordering) 3) only enabled in fast recovery ut not timeout recovery RACK (Recently ACK) addresses these limitations with the notion of time instead: a packet P1 is lost if a later packet P2 is s/acked, as at least one round trip has passed. Since RACK cares about the time sequence instead of the data sequence of packets, it can detect tail drops when later retransmission is s/acked while FACK or dupthresh can't. For reordering RACK uses a dynamically adjusted reordering window ("reo_wnd") to reduce false positives on ever (small) degree of reordering. This patch implements tcp_advanced_rack() which tracks the most recent transmission time among the packets that have been delivered (ACKed or SACKed) in tp->rack.mstamp. This timestamp is the key to determine which packet has been lost. Consider an example that the sender sends six packets: T1: P1 (lost) T2: P2 T3: P3 T4: P4 T100: sack of P2. rack.mstamp = T2 T101: retransmit P1 T102: sack of P2,P3,P4. rack.mstamp = T4 T205: ACK of P4 since the hole is repaired. rack.mstamp = T101 We need to be careful about spurious retransmission because it may falsely advance tp->rack.mstamp by an RTT or an RTO, causing RACK to falsely mark all packets lost, just like a spurious timeout. We identify spurious retransmission by the ACK's TS echo value. If TS option is not applicable but the retransmission is acknowledged less than min-RTT ago, it is likely to be spurious. We refrain from using the transmission time of these spurious retransmissions. The second half is implemented in the next patch that marks packet lost using RACK timestamp. Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
a helper to prepare the first main RACK patch. Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
a helper to prepare the main RACK patch Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
Remove the existing lost retransmit detection because RACK subsumes it completely. This also stops the overloading the ack_seq field of the skb control block. Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-