Add dev_dbg statements for easier future debugging; also change the warning
about packet ID mismatches to debug output to avoid flooding the logs. This
warning is only important in a very specific/rare use case when trying to
correlate input events with video data.
Signed-off-by: NMartin Kaltenbrunner <modin@yuri.at>
Signed-off-by: NFlorian Echtler <floe@butterbrot.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add missing functions to query the single fixed frame size (960x540) and
supported frame rates. Technically, the SUR40 supports any arbitrary frame
rate up to 60 FPS, as it is polled and not interrupt-driven. For now, we
just report 30 and 60 FPS, which is sufficient to make most V4L2 tools work.
Signed-off-by: NMartin Kaltenbrunner <modin@yuri.at>
Signed-off-by: NFlorian Echtler <floe@butterbrot.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The SUR40 hardware can deliver images at up to 60 FPS; at full USB2 bandwidth,
one raw frame will take about 11 ms to transmit. If the poll interval is above
5 ms, fully handling one frame will take longer than 16 ms and the overall
frame rate will drop below 60 FPS. To get the full frame rate without blocking
all the time and still allowing for a bit of timing jitter, we reduce the poll
interval to 4 ms.
Signed-off-by: NMartin Kaltenbrunner <modin@yuri.at>
Signed-off-by: NFlorian Echtler <floe@butterbrot.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

U8 and U16LE format human readable names were translated with string
containing emulated word. These strings were taken from msi2500 driver,
where those formats were emulated (after module parameter is set). But
on API correct names should be used, without any special case notes.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add complex unsigned 8-bit sample format for SDR capture.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use these defines instead of hardcoding this in any driver that needs it.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The mapping of COLORSPACE_DEFAULT, YCBCR_ENC_DEFAULT or QUANTIZATION_DEFAULT
to proper non-default values is fairly complex, and it is something that
needs to be done both in the kernel and in userspace.

So add macros that can do this conversion, making this available to both
kernel and userspace.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Document this new colorspace define.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

V4L2_COLORSPACE_RAW is added for raw image formats where the picture
is minimally processed and is in the internal colorspace of the sensor.

This is typically used in digital cameras where the image processing is
done later.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Document this new colorspace define.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

V4L2_COLORSPACE_DEFAULT is added so we have a specific define for
the default case where applications do not set it but leave it to 0.
In that case the driver will set the colorspace based on what it
captures.

This is already used, but we never had a define for the value 0.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The log_status ioctl should report if the audio input has mode Bilingual. However, the
check against the itv->dualwatch_stereo_mode is completely wrong and is a left-over from
the distant past. Not only is the bitmask obviously wrong, the test itself is broken too
since itv->dualwatch_stereo_mode is no longer a bitmask at all.

Fix this code properly.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This format was added but not documented. Do this now.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Support for V4L2_PIX_FMT_Y16_BE, a 16 bit big endian greyscale format.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

16 bit greyscale format, structured in Big Endian. Such a format can be
converted into a PMN image just by adding a header.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

dma_map_sg returns the number of areas mapped by the hardware,
which could be different than the areas given as an input.
The output must be saved to nent.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

dma_map_sg returns the number of areas mapped by the hardware,
which could be different than the areas given as an input.
The output must be saved to nent.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

When sg_alloc_table_from_pages() does not fail it returns a sg_table
structure with nents and nents_orig initialized to the same value.

dma_map_sg returns the number of areas mapped by the hardware,
which could be different than the areas given as an input.
The output must be saved to nent.

The output of dma_map, should be used to transverse the scatter list.

dma_unmap_sg needs the value passed to dma_map_sg (nents_orig).

sg_free_tables uses also orig_nent.

This patch fix the file to follow this paradigm.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The adv7604 driver depends on GPIOLIB, and therefore cobalt depends
on it as well.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/saa7164/saa7164-i2c.c:45:33: warning: Using plain integer as NULL pointer
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/dvb-frontends/cx24120.c:837:6: warning: symbol 'cx24120_calculate_ber_window' was not declared. Should it be static?
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/cobalt/cobalt-v4l2.c:189:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:191:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:192:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:193:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:194:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:195:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:196:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:197:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:198:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:199:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:201:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:202:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:203:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:234:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:240:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:246:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:266:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:267:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:271:28: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:275:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:276:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:312:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:313:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:314:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:315:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:317:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:320:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:321:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:321:36: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:324:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:327:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:328:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:328:41: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:329:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:331:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:332:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:334:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:335:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:336:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:362:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:367:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:368:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:420:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:421:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:422:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:423:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:516:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:516:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:518:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:518:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:518:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:525:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:525:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:546:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:546:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:548:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:549:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:550:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:551:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:552:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:553:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:554:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:555:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:556:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:556:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:556:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:563:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:564:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:564:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:569:9: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:595:16: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-v4l2.c:602:9: warning: dereference of noderef expression
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/cobalt/cobalt-i2c.c:130:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:147:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:151:26: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:156:34: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:206:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:210:26: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:215:34: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:225:27: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:335:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:336:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:337:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:348:34: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:352:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:353:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:356:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:357:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-i2c.c:359:17: warning: dereference of noderef expression
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/cobalt/cobalt-irq.c:62:33: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:64:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:65:23: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:72:21: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:73:25: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:74:25: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:82:33: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:83:33: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:91:25: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:94:23: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:103:25: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:107:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:109:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:116:13: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:119:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:120:17: warning: dereference of noderef expression
drivers/media/pci/cobalt/cobalt-irq.c:122:17: warning: dereference of noderef expression
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/cobalt/cobalt-flash.c:101:5: warning: symbol 'cobalt_flash_probe' was not declared. Should it be static?
drivers/media/pci/cobalt/cobalt-flash.c:126:6: warning: symbol 'cobalt_flash_remove' was not declared. Should it be static?
drivers/media/pci/cobalt/cobalt-cpld.c:101:6: warning: symbol 'cobalt_cpld_status' was not declared. Should it be static?
drivers/media/pci/cobalt/cobalt-cpld.c:240:6: warning: symbol 'cobalt_cpld_set_freq' was not declared. Should it be static?
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/cobalt/cobalt-flash.c:39:36: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/cobalt/cobalt-flash.c:54:36: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/cobalt/cobalt-flash.c:63:36: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/cobalt/cobalt-flash.c:82:36: warning: incorrect type in initializer (different address spaces)
drivers/media/pci/cobalt/cobalt-flash.c:107:19: warning: incorrect type in assignment (different address spaces)
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/tuners/e4000.c:287:3: warning: this decimal constant is unsigned only in ISO C90
   .rangehigh  =  2208000000L,
   ^
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fixes these warnings:

drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'omni_sg_dma_start':
drivers/media/pci/cobalt/cobalt-omnitek.c:112:28: warning: right shift count >= width of type [-Wshift-count-overflow]
  iowrite32((u32)(desc->bus >> 32), DESCRIPTOR(s->dma_channel) + 4);
                            ^
drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'descriptor_list_create':
drivers/media/pci/cobalt/cobalt-omnitek.c:222:28: warning: right shift count >= width of type [-Wshift-count-overflow]
     d->next_h = (u32)(next >> 32);
                            ^
drivers/media/pci/cobalt/cobalt-omnitek.c:268:32: warning: right shift count >= width of type [-Wshift-count-overflow]
    d->next_h = (u32)(desc->bus >> 32);
                                ^
drivers/media/pci/cobalt/cobalt-omnitek.c:275:27: warning: right shift count >= width of type [-Wshift-count-overflow]
    d->next_h = (u32)(next >> 32);
                           ^
drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'descriptor_list_chain':
drivers/media/pci/cobalt/cobalt-omnitek.c:293:31: warning: right shift count >= width of type [-Wshift-count-overflow]
   d->next_h = (u32)(next->bus >> 32);
                               ^
drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'descriptor_list_loopback':
drivers/media/pci/cobalt/cobalt-omnitek.c:332:30: warning: right shift count >= width of type [-Wshift-count-overflow]
  d->next_h = (u32)(desc->bus >> 32);
                              ^
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

[linuxtv-media:master 1023/1029] ERROR: "__aeabi_uldivmod" [drivers/media/pci/cobalt/cobalt.ko] undefined!
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The interrupt bit assignments use for the adv7511 were off by one.
This means that the current scheme (bit << (4 * stream_index)) can
no longer be used.

Fix this by precalculating and storing the correct masks in the
cobalt_stream struct.

This wasn't noticed before because the adv7511 interrupts are very
rare. But for CEC support these interrupts are essential, so this made
me realize that it wasn't working correctly.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The DVB part of the media API documentation has several
legacy things on it:
	- Examples that don't work;
	- APIs unused and deprecated;
	- places mentioning the wrong API version.

Fix them and bump the documentation version, in order to
reflect the cleanup efforts to make it more consistent with
the current status of the API.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Due to a cut-and-paste error, the argument is missing or wrong
on 3 ioctl documentation. Fix them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The notes there are somewhat confusing and assumes that the
reader would have read the DVBv3 way. This is not true anymore,
as the DVBv3 is now on a separate section that is marked as
deprecated.

So, cleanup the notes.

While here, add a note about using libdvbv5, instead of using
the DVBv5 API directly.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

In order to make it clearer about how to use the DVBv5 calls,
add an example of its usage. That should make it clearer about
what's actually required for the DVBv5 calls to work.

While here, also mentions the libdvbv5 library.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Rename the tytle of the struct documentation to reflect
the name of the structures, and use links to do cross-ref.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Format it as a table and links it with the legacy API xml.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Format it as a table and add more details, in special for
DTMB guard intervals.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Format it as a table and add more details. Also, remove the
duplicated occurrences.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

fe_bandwidth/fe_bandwidth_t is used only on DVBv3 API. So, move
it to the frontend legacy xml, and convert it into a table.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Format it as a table and add more details, in special, for
the DTMB modes.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>