Without vertical zoom, it is not possible to see all CPUs in a trace
taken on a larger machine. This patch parameterizes the height and
spacing of CPUs so that you can fit more cpus into the screen.

Ideally we should dynamically size/space the CPU rectangles with some
minimum threshold. Until then, this patch is a stop-gap.
Signed-off-by: NNikhil Rao <ncrao@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

EVT_KEY_DOWN and EVT_LEFT_DOWN events are not bound to the RootFrame
event handler. As a result, zoom/scroll via keyboard events do not
work. This patch adds the missing bindings.
Signed-off-by: NNikhil Rao <ncrao@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Stop printing an error message when we don't have the letter
for a given task state. All we need to know is if the task is
in the TASK_RUNNING state.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>

Migrate out events may happen on tasks that are not in the
runqueue, for example this is the case for tasks that are
sleeping. In this case, we don't want to log the migrate out
event in the source runqueue because the task is not eventually
in the runqueue and we have already logged its sleep event.

This fixes timeslices that spuriously propagate a sleep event
from the previous timeslice.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>

This brings a GUI tool that displays an overview of the load
of tasks proportion in each CPUs.

The CPUs forward progress is cut in timeslices. A new timeslice
is created for every runqueue event: a task gets pushed out or
pulled in the runqueue.

For each timeslice, every CPUs rectangle is colored with a red
power that describes the local load against the total load.
This more red is the rectangle, the higher is the given CPU load.
This load is the number of tasks running on the CPU, without
any distinction against the scheduler policy of the tasks, for
now.

Also for each timeslice, the event origin is depicted on the
CPUs that triggered it using a thin colored line on top of the
rectangle timeslice.

These events are:

* sleep: a task went to sleep and has then been pulled out the
  runqueue. The origin color in the thin line is dark blue.

* wake up: a task woke up and has then been pushed in the
  runqueue. The origin color is yellow.

* wake up new: a new task woke up and has then been pushed in the
  runqueue. The origin color is green.

* migrate in: a task migrated in the runqueue due to a load
  balancing operation. The origin color is violet.

* migrate out: reverse of the previous one. Migrate in events
  usually have paired migrate out events in another runqueue.
  The origin color is light blue.

Clicking on a timeslice provides the runqueue event details
and the runqueue state.

The CPU rectangles can be navigated using the usual arrow
controls. Horizontal zooming in/out is possible with the
"+" and "-" buttons.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Pierre Tardy <tardyp@gmail.com>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>

trace_unhandled() callback does not allow to access event fields, this patch
resolves the problem.

It can also been used as a more pythonic and flexible way for script writters
to demux event types

This will for example greatly simplify pytimechart event demux.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NTom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>,
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1275340329-2397-1-git-send-email-tardyp@gmail.com>
Signed-off-by: NPierre Tardy <tardyp@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

A small fix for the syscall counts script:

 - silence the match output in the shell script

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-10-git-send-email-tzanussi@gmail.com>
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

A small fix for the syscall counts by pid script:

- silence the match output in the shell script

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-9-git-send-email-tzanussi@gmail.com>
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

A small fixe for the failed syscalls by pid script:

 - silence the match output in the shell script

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-8-git-send-email-tzanussi@gmail.com>
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Some minor fixes for the workqueue-stats script:

 - Fix nuisance 'use of uninitialized value' warnings

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-6-git-send-email-tzanussi@gmail.com>
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Some minor fixes for the wakeup-latency script:

 - Fix nuisance 'use of uninitialized value' warnings

 - Avoid divide-by-zero error

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-5-git-send-email-tzanussi@gmail.com>
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

A couple of fixes for the rwtop script:

- printing the totals and clearing the hashes in the signal handler
  eventually leads to various random and serious problems when running
  the rwtop script continuously.  Moving the print_totals() calls to
  the event handlers solves that problem, and the event handlers are
  invoked frequently enough that it doesn't affect the timeliness of
  the output.

- Fix nuisance 'use of uninitialized value' warnings

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Message-Id: <1273466820-9330-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Some minor fixes for the rw-by-pid script:

- Fix nuisance 'use of uninitialized value' warnings

- Change the failed read/write sections to sort by error counts

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

A couple small fixes for the failed syscalls script:

- The script description says it can be restricted to a specific comm,
  make it so.

- silence the match output in the shell script

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

-f, -c 1, -R are now useless for trace events recording, moreover
-M is useless and event hurts.

Remove them from the documentation examples and from record scripts.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>

It should be possible to run any perf trace script in 'live
mode'. This requires being able to pass in e.g. '-i -' or other
args, which the current shell scripts aren't equipped to handle.
 In a few cases, there are required or optional args that also
need special handling. This patch makes changes the current set
of shell scripts as necessary.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-11-git-send-email-tzanussi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A couple of scripts, one in Python and the other in Perl, that
demonstrate 'live mode' tracing.  For each, the output of the
perf event stream is fed continuously to the script, which
continuously aggregates the data and reports the current results
every 3 seconds, or at the optionally specified interval.  After
the current results are displayed, the aggregations are cleared
and the cycle begins anew.

To run the scripts, simply pipe the output of the 'perf trace
record' step as input to the corresponding 'perf trace report'
step, using '-' as the filename to -o and -i:

 $ perf trace record sctop -o - | perf trace report sctop -i -

Also adds clear_term() utility functions to the Util.pm and
Util.py utility modules, for use by any script to clear the
screen.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-10-git-send-email-tzanussi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Adds a set of scripts that aggregate system call totals and system
call errors.  Most are Python scripts that also test basic
functionality of the new Python engine, but there's also one Perl
script added for comparison and for reference in some new
Documentation contained in a later patch.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-8-git-send-email-tzanussi@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Add base support for Python scripting to perf trace.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-6-git-send-email-tzanussi@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The check-perf-trace script only checks Perl functionality, and
doesn't really need to be listed as as user script anyway.

This only removes the '-report' shell script, so although it doesn't
appear in the listing, the '-record' shell script and the check perf
trace perl script itself is still available and can still be run
manually as such:

$ libexec/perf-core/scripts/perl/bin/check-perf-trace-record
$ perf trace -s libexec/perf-core/scripts/perl/check-perf-trace.pl
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-6-git-send-email-tzanussi@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

This stuff is needed by all scripting engines; move it from the Perl
engine source to a more common place.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Fix bogus calculation.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Lists the available perf trace scripts, one per line e.g.:

root@tropicana:~# perf trace -l
List of available trace scripts:
  workqueue-stats                      workqueue stats (ins/exe/create/destroy)
  wakeup-latency                       system-wide min/max/avg wakeup latency
  rw-by-file <comm>                    r/w activity for a program, by file
  check-perf-trace                     useless but exhaustive test script
  rw-by-pid                            system-wide r/w activity

To be consistent with the other listing options in perf, the
current latency trace option was changed to '-L', and '-l' is
now used to access the script listing as:

To create the list, it searches each scripts/*/bin directory for
files ending with "-report" and reads information found in
certain comment lines contained in those shell scripts:

  - if the comment line starts with "description:", the rest of the
    line is used as a 'half-line' description.  To keep each line in
    the list to a single line, the description should be limited to 40
    characters (the rest of the line contains the script name and
    args)

  - if the comment line starts with "args:", the rest of the line
    names the args the script supports.  Required args should be
    surrounded by <> brackets, optional args by [] brackets.

The current scripts in scripts/perl/bin have also been updated
with description: and args: comments.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
LKML-Reference: <1260867220-15699-5-git-send-email-tzanussi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

One oversight of the original scripting_ops patch was a lack of
support for passing args to handler scripts.  This adds
argc/argv to the start_script() scripting_op, and changes the
rw-by-file script to take 'comm' arg rather than the 'perf'
value currently hard-coded.  It also takes the opportunity to do
some related minor cleanup.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
LKML-Reference: <1260867220-15699-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fedora needs perl-ExtUtils-Embed for Perl scripting, which also
brings along libperl-devel; note this info for the convenience
of Fedora users.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259565529-6407-5-git-send-email-tzanussi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The common_* functions (e.g. common_pc(), etc) are exported as
common_* but named get_common_*, resulting in unresolved
subroutine errors when executing scripts.

Make the internal and external names match.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259565529-6407-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

To capture the relevant events for a given Perl script and to
avoid having to continually remember and type in long
command-lines, add a scripts/perl/bin directory containing two
simple shell scripts for each Perl script, one for recording and
one for processing/display. For example, to record perf data for
the rw-by-pid.pl script, run scripts/perl/bin/rw-by-pid-record
and to actually run the script and display the output run
scripts/perl/bin/rw-by-pid-report.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-8-git-send-email-tzanussi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The Perl scripting support for perf trace allows most of a trace
event's data to be accessed directly as handler arguments, but
not all of it e.g. the less common fields aren't passed in.  To
give scripts access to the other fields and/or any other data or
metadata in the main perf executable that might be useful, a way
to access the C data in perf from Perl is needed; this patch
uses the Perl XS facility to do it for the common_xxx event
fields not passed to handler functions.

Context.pm exports three functions to Perl scripts that access
fields for the current event by calling back into perf:
common_pc(), common_flags() and common_lock_depth().  Support
for common_flags() field values was added to Core.pm and a
script used to sanity check these and other basic scripting
features, check-perf-trace.pl, was also added.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-6-git-send-email-tzanussi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add Perf-Trace-Util Perl module and some scripts that use it.
Core.pm contains Perl code to define and access flag and
symbolic fields. Util.pm contains general-purpose utility
functions.

Also adds some makefile bits to install them in
libexec/perf-core/scripts/perl (or wherever perfexec_instdir
points).
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-5-git-send-email-tzanussi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>