Pull hwmon updates from Guenter Roeck:
 "New drivers for DA9052/53 PMIC as well as HIH-6130/HIH-6131 humidity
  and temperature sensors.

  Convert drivers to use devm_ functions and to use dev_pm_ops.  Address
  a couple of Coverity errors/warnings as well as compile warnings.
  Some functional improvements in applesmc driver."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (72 commits)
  hwmon: (applesmc) Ignore some temperature registers
  hwmon: (applesmc) Allow negative temperature values
  hwmon: (s3c-hwmon) Use devm_kzalloc instead of kzalloc
  hwmon: (w83781d) Fix compile warning
  hwmon: (applesmc) Shorten minimum wait time
  hwmon: (exynos4_tmu) Use struct dev_pm_ops for power management
  hwmon: (gpio-fan) Use struct dev_pm_ops for power management
  hwmon: (abituguru3) Use struct dev_pm_ops for power management
  hwmon: (abituguru) Use struct dev_pm_ops for power management
  hwmon: (acpi_power_meter) Fix unintentional integer overflow
  hwmon: (acpi_power_meter) Cleanup and optimizations
  hwmon: Honeywell Humidicon HIH-6130/HIH-6131 humidity and temperature sensor driver
  hwmon: (applesmc) Skip sensor mapping
  hwmon: (ntc_thermistor) Ensure that data->name string is terminated
  hwmon: (w83l785ts) Convert to use devm_ functions
  hwmon: (w83l785ts) Simplify code and improve readability
  hwmon: (smsc47m192) Convert to use devm_ functions
  hwmon: (smsc47m1) Convert to use devm_ functions
  hwmon: (smsc47b397) Convert to use devm_ functions
  hwmon: (k8temp) Convert to use devm_ functions
  ...

Pull watchdog changes from Wim Van Sebroeck:
 - conversion of iTCO_wdt and orion_wdt to the generic watchdog API
 - uses module_platform_driver() for s3c2410_wdt
 - Adds support for Jetway JNF99 Motherboard
 - various fixes

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: orion_wdt: Convert driver to watchdog core
  watchdog: s3c2410_wdt: Use module_platform_driver()
  watchdog: sch311x_wdt: Fix Polarity when starting watchdog
  Watchdog: OMAP: Fix the runtime pm code to avoid module getting stuck intransition state.
  watchdog: ie6xx_wdt: section mismatch in ie6xx_wdt_probe()
  watchdog: bcm63xx_wdt: fix driver section mismatch
  watchdog: iTCO_wdt.c: convert to watchdog core
  char/ipmi: remove local ioctl defines replaced by generic ones
  watchdog: xilinx: Read clock frequency directly from DT node
  watchdog: coh901327_wdt: use clk_prepare/unprepare
  watchdog: f71808e_wdt: Add support for Jetway JNF99 motherboard

Pull frontswap updates from Konrad Rzeszutek Wilk:
 "Cleanups in code and documentation.  Little bit of refactoring for
  cleaner look."

* tag 'stable/for-linus-3.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm:
  mm/frontswap: cleanup doc and comment error
  mm: frontswap: remove unneeded headers
  mm: frontswap: split out function to clear a page out
  mm: frontswap: remove unnecessary check during initialization
  mm: frontswap: make all branches of if statement in put page consistent
  mm: frontswap: split frontswap_shrink further to simplify locking
  mm: frontswap: split out __frontswap_unuse_pages
  mm: frontswap: split out __frontswap_curr_pages
  mm: frontswap: trivial coding convention issues
  mm: frontswap: remove casting from function calls through ops structure

Merge tag 'stable/for-linus-3.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen update from Konrad Rzeszutek Wilk:
 "Features:
   * Performance improvement to lower the amount of traps the hypervisor
     has to do 32-bit guests.  Mainly for setting PTE entries and
     updating TLS descriptors.
   * MCE polling driver to collect hypervisor MCE buffer and present
     them to /dev/mcelog.
   * Physical CPU online/offline support.  When an privileged guest is
     booted it is present with virtual CPUs, which might have an 1:1 to
     physical CPUs but usually don't.  This provides mechanism to
     offline/online physical CPUs.
  Bug-fixes for:
   * Coverity found fixes in the console and ACPI processor driver.
   * PVonHVM kexec fixes along with some cleanups.
   * Pages that fall within E820 gaps and non-RAM regions (and had been
     released to hypervisor) would be populated back, but potentially in
     non-RAM regions."

* tag 'stable/for-linus-3.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: populate correct number of pages when across mem boundary (v2)
  xen PVonHVM: move shared_info to MMIO before kexec
  xen: simplify init_hvm_pv_info
  xen: remove cast from HYPERVISOR_shared_info assignment
  xen: enable platform-pci only in a Xen guest
  xen/pv-on-hvm kexec: shutdown watches from old kernel
  xen/x86: avoid updating TLS descriptors if they haven't changed
  xen/x86: add desc_equal() to compare GDT descriptors
  xen/mm: zero PTEs for non-present MFNs in the initial page table
  xen/mm: do direct hypercall in xen_set_pte() if batching is unavailable
  xen/hvc: Fix up checks when the info is allocated.
  xen/acpi: Fix potential memory leak.
  xen/mce: add .poll method for mcelog device driver
  xen/mce: schedule a workqueue to avoid sleep in atomic context
  xen/pcpu: Xen physical cpus online/offline sys interface
  xen/mce: Register native mce handler as vMCE bounce back point
  x86, MCE, AMD: Adjust initcall sequence for xen
  xen/mce: Add mcelog support for Xen platform

Pull KVM updates from Avi Kivity:
 "Highlights include
  - full big real mode emulation on pre-Westmere Intel hosts (can be
    disabled with emulate_invalid_guest_state=0)
  - relatively small ppc and s390 updates
  - PCID/INVPCID support in guests
  - EOI avoidance; 3.6 guests should perform better on 3.6 hosts on
    interrupt intensive workloads)
  - Lockless write faults during live migration
  - EPT accessed/dirty bits support for new Intel processors"

Fix up conflicts in:
 - Documentation/virtual/kvm/api.txt:

   Stupid subchapter numbering, added next to each other.

 - arch/powerpc/kvm/booke_interrupts.S:

   PPC asm changes clashing with the KVM fixes

 - arch/s390/include/asm/sigp.h, arch/s390/kvm/sigp.c:

   Duplicated commits through the kvm tree and the s390 tree, with
   subsequent edits in the KVM tree.

* tag 'kvm-3.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
  KVM: fix race with level interrupts
  x86, hyper: fix build with !CONFIG_KVM_GUEST
  Revert "apic: fix kvm build on UP without IOAPIC"
  KVM guest: switch to apic_set_eoi_write, apic_write
  apic: add apic_set_eoi_write for PV use
  KVM: VMX: Implement PCID/INVPCID for guests with EPT
  KVM: Add x86_hyper_kvm to complete detect_hypervisor_platform check
  KVM: PPC: Critical interrupt emulation support
  KVM: PPC: e500mc: Fix tlbilx emulation for 64-bit guests
  KVM: PPC64: booke: Set interrupt computation mode for 64-bit host
  KVM: PPC: bookehv: Add ESR flag to Data Storage Interrupt
  KVM: PPC: bookehv64: Add support for std/ld emulation.
  booke: Added crit/mc exception handler for e500v2
  booke/bookehv: Add host crit-watchdog exception support
  KVM: MMU: document mmu-lock and fast page fault
  KVM: MMU: fix kvm_mmu_pagetable_walk tracepoint
  KVM: MMU: trace fast page fault
  KVM: MMU: fast path of handling guest page fault
  KVM: MMU: introduce SPTE_MMU_WRITEABLE bit
  KVM: MMU: fold tlb flush judgement into mmu_spte_update
  ...

Pull networking changes from David S Miller:

 1) Remove the ipv4 routing cache.  Now lookups go directly into the FIB
    trie and use prebuilt routes cached there.

    No more garbage collection, no more rDOS attacks on the routing
    cache.  Instead we now get predictable and consistent performance,
    no matter what the pattern of traffic we service.

    This has been almost 2 years in the making.  Special thanks to
    Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who
    have helped along the way.

    I'm sure that with a change of this magnitude there will be some
    kind of fallout, but such things ought the be simple to fix at this
    point.  Luckily I'm not European so I'll be around all of August to
    fix things :-)

    The major stages of this work here are each fronted by a forced
    merge commit whose commit message contains a top-level description
    of the motivations and implementation issues.

 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on
    input.

 3) TCP SYN/ACK performance tweaks from Eric Dumazet.

 4) Add namespace support for netfilter L4 conntrack helpers, from Gao
    Feng.

 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from
    Yuval Mintz.

 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet.

 7) Support for connection tracker helpers in userspace, from Pablo
    Neira Ayuso.

 8) Allow userspace driven TX load balancing functions in TEAM driver,
    from Jiri Pirko.

 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with
    embedded gotos.

10) TCP Small Queues, essentially minimize the amount of TCP data queued
    up in the packet scheduler layer.  Whereas the existing BQL (Byte
    Queue Limits) limits the pkt_sched --> netdevice queuing levels,
    this controls the TCP --> pkt_sched queueing levels.

    From Eric Dumazet.

11) Reduce the number of get_page/put_page ops done on SKB fragments,
    from Alexander Duyck.

12) Implement protection against blind resets in TCP (RFC 5961), from
    Eric Dumazet.

13) Support the client side of TCP Fast Open, basically the ability to
    send data in the SYN exchange, from Yuchung Cheng.

    Basically, the sender queues up data with a sendmsg() call using
    MSG_FASTOPEN, then they do the connect() which emits the queued up
    fastopen data.

14) Avoid all the problems we get into in TCP when timers or PMTU events
    hit a locked socket.  The TCP Small Queues changes added a
    tcp_release_cb() that allows us to queue work up to the
    release_sock() caller, and that's what we use here too.  From Eric
    Dumazet.

15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits)
  genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP
  r8169: revert "add byte queue limit support".
  ipv4: Change rt->rt_iif encoding.
  net: Make skb->skb_iif always track skb->dev
  ipv4: Prepare for change of rt->rt_iif encoding.
  ipv4: Remove all RTCF_DIRECTSRC handliing.
  ipv4: Really ignore ICMP address requests/replies.
  decnet: Don't set RTCF_DIRECTSRC.
  net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse.
  ipv4: Remove redundant assignment
  rds: set correct msg_namelen
  openvswitch: potential NULL deref in sample()
  tcp: dont drop MTU reduction indications
  bnx2x: Add new 57840 device IDs
  tcp: avoid oops in tcp_metrics and reset tcpm_stamp
  niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value
  niu: Fix to check for dma mapping errors.
  net: Fix references to out-of-scope variables in put_cmsg_compat()
  net: ethernet: davinci_emac: add pm_runtime support
  net: ethernet: davinci_emac: Remove unnecessary #include
  ...

Pull s390 changes from Martin Schwidefsky:
 "No new functions, a few changes to make the code more robust, some
  cleanups and bug fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (21 commits)
  s390/vtimer: rework virtual timer interface
  s390/dis: Add the servc instruction to the disassembler.
  s390/comments: unify copyright messages and remove file names
  s390/lgr: Add init check to lgr_info_log()
  s390/cpu init: use __get_cpu_var instead of per_cpu
  s390/idle: reduce size of s390_idle_data structure
  s390/idle: fix sequence handling vs cpu hotplug
  s390/ap: resend enable adapter interrupt request.
  s390/hypfs: Add missing get_next_ino()
  s390/dasd: add shutdown action
  s390/ipl: Fix ipib handling for "dumpreipl" shutdown action
  s390/smp: make absolute lowcore / cpu restart parameter accesses more robust
  s390/vmlogrdr: cleanup driver attribute usage
  s390/vmlogrdr: cleanup device attribute usage
  s390/ccwgroup: remove unused ccwgroup_device member
  s390/cio/chp: cleanup attribute usage
  s390/sigp: use sigp order code defines in assembly code
  s390/smp: use sigp cpu status definitions
  s390/smp/kvm: unifiy sigp definitions
  s390/smp: remove redundant check
  ...

Pull blackfin changes from Bob Liu:
 "The big changes are adding PM and HDMI support for bf60x, other
  patches are various bug fix and code cleanup."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: (48 commits)
  bf60x: fix build warning
  PM: add BF60x flash suspend and resume support
  blackfin: twi: read twi mmr via bfin_read macro
  dpm: deepsleep: reserve stack
  bf60x: cpufreq: fix anomaly 05000273
  bf609: add adv7511 display support
  blackfin: cplb-nompu: fix ROM cplb size for bf609-ezkit
  bf60x: Add double fault, hardware error and NMI SEC handler
  bf60x: update anomaly id in serial and twi driver headers.
  bf60x: vs6624 pin update
  bf60x: add default anomaly setting.
  bf60x: update bf60x anomaly list.
  bf60x: sec: Enable sec interrupt source priority configuration.
  bf60x: sec: Clean up interrupt initialization code for SEC.
  bf609: reuse bf5xx-i2s-pcm.c as i2s pcm driver
  bf561: add capabilities in adv7183_inputs
  bf609: convert vs6624 blank_clocks to black_pixels
  blackfin: fix musb macro name
  cleanup: sec and linkport only built on bf60x
  bfin: pint: add pint suspend and resume
  ...

Pull C6X changes from Mark Salter:

  - remove use of legacy irqs which really wasn't needed
  - add support for C66x SoC on EVMC6678 board
  - clean up compiler warning

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  C6X: clean up compiler warning
  C6X: add basic support for TMS320C6678 SoC
  C6X: remove dependence on legacy IRQs
  C6X: remove megamod-pic requirement on direct-mapped core pic

lockdep_is_held() is defined when CONFIG_LOCKDEP, not CONFIG_PROVE_LOCKING.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jesse Gross <jesse@nicira.com>
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix several build warning while using bf609-ezkit_defconfig.
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Reserve 12 bytes on the stack for deepsleep use.
Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Anomaly 05000273 doesn't apply to bf60x.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

In user xip test, there is a cplb error when ROMKERNEL try to mount romfs
using 'mount -t romfs /dev/mtdblock2 /mnt', becasue the CPLB setting is not
correct.
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Change ce pin to PE4 according to new adaptor board and re-define ppi for vs6624
to avoid gpio conflict.
Signed-off-by: NVivi Li <vivi.li@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Customize the SEC interrupt priority array in machine ints-priority.c.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Turn SEC related macro CONFIG_BF60x into SEC_GCTL.
Move machine specific GPIO_PINT macros to machine gpio header.
Split SEC init_arch_irq() and vec_to_irq() from old SIC.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

It's the same for both bf5xx and bf6xx soc.
Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Add capabilities in adv7183_inputs to indicate that S_STD is supported.
Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

PPI driver has changed blank units from clocks to pixels.
Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Musb can't work since the marco name has been changed.
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Add pint suspend and resume if defined BFIN_GPIO_PINT.
Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

save and restore pint sec CTL
save and restore pint registers
add pint suspend and resume when suspend to mem
Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Pass wake up source mask and wakeup source polarity to deepsleep and
hibernate.
Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Set .probe_type = "map_rom" for norflash so that xip_test can run
correctly.
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Otherwise, the compiler may optimize assemble code into 8bit access instruction
when target register is 8 bit width.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>