1) Reduce the size of (struct fdtable) to exactly 64 bytes on 32bits
   platforms, lowering kmalloc() allocated space by 50%.

2) Reduce the size of (files_struct), using a special 32 bits (or
   64bits) embedded_fd_set, instead of a 1024 bits fd_set for the
   close_on_exec_init and open_fds_init fields.  This save some ram (248
   bytes per task) as most tasks dont open more than 32 files.  D-Cache
   footprint for such tasks is also reduced to the minimum.

3) Reduce size of allocated fdset.  Currently two full pages are
   allocated, that is 32768 bits on x86 for example, and way too much.  The
   minimum is now L1_CACHE_BYTES.

UP and SMP should benefit from this patch, because most tasks will touch
only one cache line when open()/close() stdin/stdout/stderr (0/1/2),
(next_fd, close_on_exec_init, open_fds_init, fd_array[0 ..  2] being in the
same cache line)
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Linus points out that ext3_readdir's readahead only cuts in when
ext3_readdir() is operating at the very start of the directory.  So for large
directories we end up performing no readahead at all and we suck.

So take it all out and use the core VM's page_cache_readahead().  This means
that ext3 directory reads will use all of readahead's dynamic sizing goop.

Note that we're using the directory's filp->f_ra to hold the readahead state,
but readahead is actually being performed against the underlying blockdev's
address_space.  Fortunately the readahead code is all set up to handle this.

Tested with printk.  It works.  I was struggling to find a real workload which
actually cared.

(The patch also exports page_cache_readahead() to GPL modules)

Cc: "Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is unsafe to suspend devices if the hardware is controlled by X.  Add an
extra check to prevent this from happening.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move externs from C source files to header files.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce the low level interface that can be used for handling the
snapshot of the system memory by the in-kernel swap-writing/reading code of
swsusp and the userland interface code (to be introduced shortly).

Also change the way in which swsusp records the allocated swap pages and,
consequently, simplifies the in-kernel swap-writing/reading code (this is
necessary for the userland interface too).  To this end, it introduces two
helper functions in mm/swapfile.c, so that the swsusp code does not refer
directly to the swap internals.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Both R1BIO_Barrier and R1BIO_Returned are 4 !!!!

This means that barrier requests don't get returned (i.e.  b_endio called)
because it looks like they already have been.
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch moves {ip,ip6,arp}t_entry_{match,target} definitions to
x_tables.h. This move simplifies code and future compatibility fixes.
Signed-off-by: NDmitry Mishin <dim@openvz.org>
Acked-off-by: NKirill Korotaev <dev@openvz.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set the family field in xt_[matches|targets] registered.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Centralize the page migration functions in anticipation of additional
tinkering.  Creates a new file mm/migrate.c

1. Extract buffer_migrate_page() from fs/buffer.c

2. Extract central migration code from vmscan.c

3. Extract some components from mempolicy.c

4. Export pageout() and remove_from_swap() from vmscan.c

5. Make it possible to configure NUMA systems without page migration
   and non-NUMA systems with page migration.

I had to so some #ifdeffing in mempolicy.c that may need a cleanup.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Quite a long time back, prepare_hugepage_range() replaced
is_aligned_hugepage_range() as the callback from mm/mmap.c to arch code to
verify if an address range is suitable for a hugepage mapping.
is_aligned_hugepage_range() stuck around, but only to implement
prepare_hugepage_range() on archs which didn't implement their own.

Most archs (everything except ia64 and powerpc) used the same
implementation of is_aligned_hugepage_range().  On powerpc, which
implements its own prepare_hugepage_range(), the custom version was never
used.

In addition, "is_aligned_hugepage_range()" was a bad name, because it
suggests it returns true iff the given range is a good hugepage range,
whereas in fact it returns 0-or-error (so the sense is reversed).

This patch cleans up by abolishing is_aligned_hugepage_range().  Instead
prepare_hugepage_range() is defined directly.  Most archs use the default
version, which simply checks the given region is aligned to the size of a
hugepage.  ia64 and powerpc define custom versions.  The ia64 one simply
checks that the range is in the correct address space region in addition to
being suitably aligned.  The powerpc version (just as previously) checks
for suitable addresses, and if necessary performs low-level MMU frobbing to
set up new areas for use by hugepages.

No libhugetlbfs testsuite regressions on ppc64 (POWER5 LPAR).
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NZhang Yanmin <yanmin.zhang@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The optional hugepage callback, hugetlb_free_pgd_range() is presently
implemented non-trivially only on ia64 (but I plan to add one for powerpc
shortly).  It has its own prototype for the function in asm-ia64/pgtable.h.
 However, since the function is called from generic code, it make sense for
its prototype to be in the generic hugetlb.h header file, as the protypes
other arch callbacks already are (prepare_hugepage_range(),
set_huge_pte_at(), etc.).  This patch makes it so.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

free_pgtables() has special logic to call hugetlb_free_pgd_range() instead
of the normal free_pgd_range() on hugepage VMAs.  However, the test it uses
to do so is incorrect: it calls is_hugepage_only_range on a hugepage sized
range at the start of the vma.  is_hugepage_only_range() will return true
if the given range has any intersection with a hugepage address region, and
in this case the given region need not be hugepage aligned.  So, for
example, this test can return true if called on, say, a 4k VMA immediately
preceding a (nicely aligned) hugepage VMA.

At present we get away with this because the powerpc version of
hugetlb_free_pgd_range() is just a call to free_pgd_range().  On ia64 (the
only other arch with a non-trivial is_hugepage_only_range()) we get away
with it for a different reason; the hugepage area is not contiguous with
the rest of the user address space, and VMAs are not permitted in between,
so the test can't return a false positive there.

Nonetheless this should be fixed.  We do that in the patch below by
replacing the is_hugepage_only_range() test with an explicit test of the
VMA using is_vm_hugetlb_page().

This in turn changes behaviour for platforms where is_hugepage_only_range()
returns false always (everything except powerpc and ia64).  We address this
by ensuring that hugetlb_free_pgd_range() is defined to be identical to
free_pgd_range() (instead of a no-op) on everything except ia64.  Even so,
it will prevent some otherwise possible coalescing of calls down to
free_pgd_range().  Since this only happens for hugepage VMAs, removing this
small optimization seems unlikely to cause any trouble.

This patch causes no regressions on the libhugetlbfs testsuite - ppc64
POWER5 (8-way), ppc64 G5 (2-way) and i386 Pentium M (UP).
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Acked-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Originally, mm/hugetlb.c just handled the hugepage physical allocation path
and its {alloc,free}_huge_page() functions were used from the arch specific
hugepage code.  These days those functions are only used with mm/hugetlb.c
itself.  Therefore, this patch makes them static and removes their
prototypes from hugetlb.h.  This requires a small rearrangement of code in
mm/hugetlb.c to avoid a forward declaration.

This patch causes no regressions on the libhugetlbfs testsuite (ppc64,
POWER5).
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These days, hugepages are demand-allocated at first fault time.  There's a
somewhat dubious (and racy) heuristic when making a new mmap() to check if
there are enough available hugepages to fully satisfy that mapping.

A particularly obvious case where the heuristic breaks down is where a
process maps its hugepages not as a single chunk, but as a bunch of
individually mmap()ed (or shmat()ed) blocks without touching and
instantiating the pages in between allocations.  In this case the size of
each block is compared against the total number of available hugepages.
It's thus easy for the process to become overcommitted, because each block
mapping will succeed, although the total number of hugepages required by
all blocks exceeds the number available.  In particular, this defeats such
a program which will detect a mapping failure and adjust its hugepage usage
downward accordingly.

The patch below addresses this problem, by strictly reserving a number of
physical hugepages for hugepage inodes which have been mapped, but not
instatiated.  MAP_SHARED mappings are thus "safe" - they will fail on
mmap(), not later with an OOM SIGKILL.  MAP_PRIVATE mappings can still
trigger an OOM.  (Actually SHARED mappings can technically still OOM, but
only if the sysadmin explicitly reduces the hugepage pool between mapping
and instantiation)

This patch appears to address the problem at hand - it allows DB2 to start
correctly, for instance, which previously suffered the failure described
above.

This patch causes no regressions on the libhugetblfs testsuite, and makes a
test (designed to catch this problem) pass which previously failed (ppc64,
POWER5).
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

2.6.16-rc3 uses hugetlb on-demand paging, but it doesn_t support hugetlb
mprotect.

From: David Gibson <david@gibson.dropbear.id.au>

  Remove a test from the mprotect() path which checks that the mprotect()ed
  range on a hugepage VMA is hugepage aligned (yes, really, the sense of
  is_aligned_hugepage_range() is the opposite of what you'd guess :-/).

  In fact, we don't need this test.  If the given addresses match the
  beginning/end of a hugepage VMA they must already be suitably aligned.  If
  they don't, then mprotect_fixup() will attempt to split the VMA.  The very
  first test in split_vma() will check for a badly aligned address on a
  hugepage VMA and return -EINVAL if necessary.

From: "Chen, Kenneth W" <kenneth.w.chen@intel.com>

  On i386 and x86-64, pte flag _PAGE_PSE collides with _PAGE_PROTNONE.  The
  identify of hugetlb pte is lost when changing page protection via mprotect.
  A page fault occurs later will trigger a bug check in huge_pte_alloc().

  The fix is to always make new pte a hugetlb pte and also to clean up
  legacy code where _PAGE_PRESENT is forced on in the pre-faulting day.
Signed-off-by: NZhang Yanmin <yanmin.zhang@intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Optimise page_count compound page test and make it consistent with similar
functions.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

set_page_count usage outside mm/ is limited to setting the refcount to 1.
Remove set_page_count from outside mm/, and replace those users with
init_page_count() and set_page_refcounted().

This allows more debug checking, and tighter control on how code is allowed
to play around with page->_count.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that compound page handling is properly fixed in the VM, move nommu
over to using compound pages rather than rolling their own refcounting.

nommu vm page refcounting is broken anyway, but there is no need to have
divergent code in the core VM now, nor when it gets fixed.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: David Howells <dhowells@redhat.com>

(Needs testing, please).
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove __put_page from outside the core mm/.  It is dangerous because it does
not handle compound pages nicely, and misses 1->0 transitions.  If a user
later appears that really needs the extra speed we can reevaluate.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Turn basically everything in vmscan.c into `unsigned long'.  This is to avoid
the possibility that some piece of code in there might decide to operate upon
more than 4G (or even 2G) of pages in one hit.

This might be silly, but we'll need it one day.

Cc: Christoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When on_each_cpu() runs the callback on other CPUs, it runs with local
interrupts disabled.  So we should run the function with local interrupts
disabled on this CPU, too.

And do the same for UP, so the callback is run in the same environment on both
UP and SMP.  (strictly it should do preempt_disable() too, but I think
local_irq_disable is sufficiently equivalent).

Also uninlines on_each_cpu().  softirq.c was the most appropriate file I could
find, but it doesn't seem to justify creating a new file.

Oh, and fix up that comment over (under?) x86's smp_call_function().  It
drives me nuts.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

SLAB_NO_REAP is documented as an option that will cause this slab not to be
reaped under memory pressure.  However, that is not what happens.  The only
thing that SLAB_NO_REAP controls at the moment is the reclaim of the unused
slab elements that were allocated in batch in cache_reap().  Cache_reap()
is run every few seconds independently of memory pressure.

Could we remove the whole thing?  Its only used by three slabs anyways and
I cannot find a reason for having this option.

There is an additional problem with SLAB_NO_REAP.  If set then the recovery
of objects from alien caches is switched off.  Objects not freed on the
same node where they were initially allocated will only be reused if a
certain amount of objects accumulates from one alien node (not very likely)
or if the cache is explicitly shrunk.  (Strangely __cache_shrink does not
check for SLAB_NO_REAP)

Getting rid of SLAB_NO_REAP fixes the problems with alien cache freeing.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since size_t has the same size as a long on all architectures, it's enough
for overflow checks to check against ULONG_MAX.

This change could allow a compiler better optimization (especially in the
n=1 case).

The practical effect seems to be positive, but quite small:

    text           data     bss      dec            hex filename
21762380        5859870 1848928 29471178        1c1b1ca vmlinux-old
21762211        5859870 1848928 29471009        1c1b121 vmlinux-patched
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clarify that preemption needs to be guarded against with the
__xxx_page_state functions.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Have an explicit mm call to split higher order pages into individual pages.
 Should help to avoid bugs and be more explicit about the code's intention.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

atomic_add_unless (atomic_inc_not_zero) no longer requires an offset refcount
to function correctly.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The VM has an interesting race where a page refcount can drop to zero, but it
is still on the LRU lists for a short time.  This was solved by testing a 0->1
refcount transition when picking up pages from the LRU, and dropping the
refcount in that case.

Instead, use atomic_add_unless to ensure we never pick up a 0 refcount page
from the LRU, thus a 0 refcount page will never have its refcount elevated
until it is allocated again.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Atomic operation removal from slab
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

More atomic operation removal from page allocator
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In the page release paths, we can be sure that nobody will mess with our
page->flags because the refcount has dropped to 0.  So no need for atomic
operations here.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

PG_active is protected by zone->lru_lock, it does not need TestSet/TestClear
operations.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

PG_lru is protected by zone->lru_lock. It does not need TestSet/TestClear
operations.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Git patch 52dfa9a64cfb3dd01fa1ee1150d589481e54e28e

	[PATCH] move rtc_interrupt() prototype to rtc.h

broke strace(1) builds.  The below moves the kernel-only additions lower,
under the already provided #ifdef __KERNEL__ statement.

Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch introduces the DMA_28BIT_MASK constant in dma-mapping.h
ALSA drivers using this mask are changed to use the new constant.
Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NJaroslav Kysela <perex@suse.cz>

Allows use of the optional user facility to insert ITU-T
(http://www.itu.int/ITU-T/) specified DTE facilities in call set-up x25
packets.  This feature is optional; no facilities will be added if the ioctl
is not used, and call setup packet remains the same as before.

If the ioctls provided by the patch are used, then a facility marker will be
added to the x25 packet header so that the called dte address extension
facility can be differentiated from other types of facilities (as described in
the ITU-T X.25 recommendation) that are also allowed in the x25 packet header.

Facility markers are made up of two octets, and may be present in the x25
packet headers of call-request, incoming call, call accepted, clear request,
and clear indication packets.  The first of the two octets represents the
facility code field and is set to zero by this patch.  The second octet of the
marker represents the facility parameter field and is set to 0x0F because the
marker will be inserted before ITU-T type DTE facilities.

Since according to ITU-T X.25 Recommendation X.25(10/96)- 7.1 "All networks
will support the facility markers with a facility parameter field set to all
ones or to 00001111", therefore this patch should work with all x.25 networks.

While there are many ITU-T DTE facilities, this patch implements only the
called and calling address extension, with placeholders in the
x25_dte_facilities structure for the rest of the facilities.

Testing:

This patch was tested using a cisco xot router connected on its serial ports
to an X.25 network, and on its lan ports to a host running an xotd daemon.

It is also possible to test this patch using an xotd daemon and an x25tap
patch, where the xotd daemons work back-to-back without actually using an x.25
network.  See www.fyonne.net for details on how to do this.
Signed-off-by: NShaun Pereira <spereira@tusc.com.au>
Acked-by: NAndrew Hendry <ahendry@tusc.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the register_ioctl32_conversion() patch in the kernel is now obsolete,
provide another method to allow 32 bit user space ioctls to reach the kernel.
Signed-off-by: NShaun Pereira <spereira@tusc.com.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add prototypes for stuff recently added by Alan.

HPA presence/enabled
HPA commands

Also add ata_id_is_cfa() as that is needed to detect and handle CF cards
which currently we reject.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add some dummy noop functions for use by libata clients
that do not need to do anything. Future SAS patches will
utilize these functions.
Signed-off-by: NBrian King <brking@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Remove the ATA_PROT_PIO_MULT protocol.
Signed-off-by: NAlbert Lee <albertcc@tw.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>