My PL2303HX works at 500kbps after applying this patch.
I suppose that it could work at other non standard speeds since this fix

"correctly handle baudrates above 115200"
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/usb/serial/pl2303.c?id=8d48fdf689fed2c73c493e5146d1463689246442

came after this one

"fix baud rate handling in case of unsupported values"
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/usb/serial/pl2303.c?id=25b8286805e856c8c7fda127018e31032c918015

but I only can test it with 500000.
Patch made against mainline but tested with 3.4.45
Signed-off-by: NLuca Olivetti <luca@ventoso.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds an ohci->priv field for private use by OHCI
platform drivers.

Until now none of the platform drivers has used this private space,
but that's about to change in the next patch of this series.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch splits the ohci-platform code from ohci-hcd out
into its own separate driver module.This work is part of enabling
multi-platform kernels on ARM.

In V2:
  -Passed "hcd" argument instead of "ohci" in ohci_setup() because it is
   using "struct usb_hcd" argument.
In V3:
  -Directly passed "hcd" argument not required to call ohci_to_hcd() function.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pci_enable_device() will set device power state to D0,
so it's no need to do it again in ci13xxx_pci_probe().
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The usb3503 driver sleeps a flat 100ms when resetting the chip, with a
comment about waiting for the reference clock. This seems to be a
board-specific detail that should not hold up boot across all platforms.
This patch reduces the sleep to the 4ms initialization delay that the
chip itself actually requires (as per its data sheet). If certain boards
require more time to set up the reference clock, they should change this
through local patches or add a proper, configurable synchronization
mechanism.
Signed-off-by: NJulius Werner <jwerner@chromium.org>
Signed-off-by: NDongjin Kim <tobetter@gmail.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove an erroneous tab that should be a space.
Signed-off-by: NJulius Werner <jwerner@chromium.org>
Signed-off-by: NDongjin Kim <tobetter@gmail.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds Wireless USB root hub support to the USB HCD.  It allows
the HWA to create its root hub which previously failed because the HCD
treated wireless root hubs the same as USB2 high speed hubs.  The creation
of the root hub would fail in that case due to lack of TTs which wireless
root hubs do not support.
Signed-off-by: NThomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove redundant "_fusbh200_" from fusbh200_hcd_fusbh200_probe
and fusbh200_hcd_fusbh200_remove
Signed-off-by: NYuan-Hsin Chen <yhchen@faraday-tech.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If you want to download Infineon modem via USB, this Infineon USB
flashloader driver is required.
Signed-off-by: NWei Shuai <cpuwolf@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch splits the PCI portion of ohci-hcd out into its
own separate driver module, called ohci-pci.

The major point of difficulty lies in ohci-pci's many vendor- and
device-specific workarounds.  Some of them have to be applied before
calling ohci_start() some after, which necessitates a fair amount of
code motion.  The other platform drivers require much smaller changes.

The complete sb800_prefetch() function moved to ohci-q.c,because its
only related to ohci-pci driver.

USB_OHCI_HCD_PCI symbol no longer dependence on STB03xxx, PPC_MPC52xx and
USB_OHCI_HCD_PPC_OF that's what removed.

V2:
  - few specific content of pci related code in ohci_pci_start function has been moved to ohci_pci_reset
    and rest of the generic code is written in ohci_start of ohci-hcd.c file.
V3:
 - ohci_restart() has been called in ohci_pci_reset() function for to reset the ohci pci.

V4:
 -sb800_prefetch() moved to ohci-q.c,because its only related to ohci-pci.
 -no longer _creating_ CONFIG_USB_OHCI_PCI,creating CONFIG_USB_OHCI_HCD_PCI.
 -overrides renamed with pci_override,its giving proper meaning.

V5:
 -sb800_prefetch() moved to pci-quirks.c,because its only related to pci.

V6:
 -sb800_prefetch() function has been moved to pci-quirks.c made as separate patch in 2/3.
 -Most of the generic ohci pci changes moved in 2/3 patch,now this is complete  ohci-pci separation patch.

V7:
 -Unrelated include file has been removed from ohci.h file.

V8:
 -USB_OHCI_HCD_PCI symbol does not dependence on STB03xxx, PPC_MPC52xx and USB_OHCI_HCD_PPC_OF.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Note that this changes is part of separating the ohci pci host controller
driver from ohci-hcd host code.
This contains :
     -Moved sb800_prefetch() function from ohci-pci.c to pci-quirks.c file
      and EXPORTed, this is part of the effort to move the ohci pci related
      code to generic pci code.
     -Passed "device" argument instead  of "ohci_hcd" in sb800_prefetch()
      function to avoid extra include file in pci-quirks.c.

V2:
     -Passed "device" argment instead of "pci_dev", then we use to_pci_dev()
      to get the "pci_dev" structure.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch prepares ohci-hcd for being split up into a core
library and separate platform driver modules.  A generic
ohci_hc_driver structure is created, containing all the "standard"
values, and a new mechanism is added whereby a driver module can
specify a set of overrides to those values.  In addition the
ohci_restart(),ohci_suspend() and ohci_resume() routines need
to be EXPORTed for use by the drivers.

Added ohci_setip(() and ohci_start() routine for to start the generic
controller rather than each having its own idiosyncratic approach.
This allow to clean duplicated code in most of SOC driver

In V2:
 -ohci_hcd_init() ohci_run() and ohci_stop() are not made non-static.
 -Adds the ohci_setup() and ohci_start() routine.

In V3:
 -purpose of ohci_setup() and ohci_start() function description written in the patch
  description.
 -ohci_init() are not made non-static but now called beginning of the ohci_restart().
 -ohci_run() signature change reverted back.
 -unrelated changes removed.
 -duplicate comment line removed.
 -inline ohci_suspend() and ohci_resume() is not needed so removed from ohci.h file.

In V4:
 -ohci-init() EXPORTed because it is called by all bus glue modules.
 -ohci-setup() removed from 1/2 added into 2/2 patch.

In V5:
 -Again ohci_setup() is added and EXPORTed because to replace the ohci_init() from
  all bus glues.
 -ohci_init() is not made non-static function.

In V6:
  -ohci_init() call is removed from ohci_quirk_nec_worker(), because it is already called in ohci_restart().

In V8:
  -ohci_hcd_init() is called by ohci_setup() to make generic ohci initialization in all ohci drivers.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch attempts to fix the isochronous API in the fhci-hcd
driver.  There are two problems with the current code:

	ed->last_iso is used but not set anywhere.  The patch changes
	its name to ed->next_iso and uses it to store the frame number
	of the next available slot in the isochronous stream.

	urb->start_frame isn't set when the URB_ISO_ASAP flag is off.
	The patch sets it to the next available slot if the stream is
	in use, or the current frame otherwise.

This won't give the right behavior when an underrun occurs, but I
don't know enough about the driver to handle that case.

Unfortunately, I don't have any way to test these changes.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: Anton Vorontsov <avorontsov@ru.mvista.com>
CC: Li Yang <leoli@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch attempts to update the imx21-hcd driver to the current
standard for the isochronous API.  Firstly, urb->start_frame should
always be set by the driver; it is not an input parameter.  Secondly,
the URB_ISO_ASAP flag matters only when an URB is submitted to a
stream that has gotten an underrun.  It causes the URB to be scheduled
for the next available slot in the future, rather than the earliest
unused (and expired) slot.

Unfortunately, I don't have any way to test these changes.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: Sascha Hauer <kernel@pengutronix.de>
CC: Martin Fuzzey <mfuzzey@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch attempts to fix the isochonour API in the musb host
driver.  In particular, the urb->start_frame field should always be
set by the driver; it isn't an input parameter.

The simplest way to accomplish this is to treat all URBs as though the
URB_ISO_ASAP flag was set.  This won't give the right behavior when an
underrun occurs, but I don't know enough about the musb driver to
handle that case.

Unfortunately, I have no way to test this change.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Exynos5440 does not require any explict USB phy configuration. So skip
the USB phy configuration for Exynos5440 based platforms.
Signed-off-by: NThomas Abraham <thomas.ab@samsung.com>
Ackked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a specifier we may use to dump small buffers.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.

Also, unnecessary dev_set_drvdata() is removed, because the driver core
clears the driver data to NULL after device_release or on probe failure.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

'hcd' can never be NULL and the spear_ehci_hcd_drv_remove routine
will never be called in_interrupt. Hence remove these checks.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When converting this driver to devm_ioremap_resource, the removal of this now
unneeded function has been forgotten.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is to add a property 'disabled-ports' representing the unused port
of USB3503. USB3503 can support up to 3 USB host port and each ports can be
controlled to be enabled or disabled. Do not describe this property if all
ports must be enabled.

You can represent the ports to disable in the device tree.

	usb3503@08{
		...
		disabled-ports = <2 3>;
		...
	};
Signed-off-by: NDongjin Kim <tobetter@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is to disable the USB ports unconnected to USB3503. In order to
disable the port, 'port_off_mask' must be set.

* Disable PORT1 only
	.port_off_mask = USB3503_OFF_PORT1;

* Disable PORT1 and PORT3 only
	.port_off_mask = USB3503_OFF_PORT1 | USB3503_OFF_PORT3;

* Enables all ports
	.port_off_mask = 0;
Signed-off-by: NDongjin Kim <tobetter@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

convert list_for_each() to list_for_each_entry() where
applicable.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix to release all resources when fusbh200_setup() fail instead of only
return error.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

'nop_xceiv_dt_ids' is always compiled in. Hence use of
of_match_ptr is unnecessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

'platform_uhci_ids' is always compiled in. Hence use of
of_match_ptr is unnecessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Tony Prisk <linux@prisktech.co.nz>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

'spear_ohci_id_table' is always compiled in. Hence use of
of_match_ptr is unnecessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

'omap_ohci_dt_ids' is always compiled in. Hence use of
of_match_ptr is unnecessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

'ehci_orion_dt_ids' is always compiled in. Hence use of
of_match_ptr is unnecessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Tzachi Perelstein <tzachi@marvell.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

'spear_ehci_id_table' is always compiled in. Hence use of
of_match_ptr is unnecessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

'vt8500_ehci_ids' is always compiled in. Hence use of
of_match_ptr is unnecessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

'omap_ehci_dt_ids' is always compiled in. Hence use of
of_match_ptr is unnecessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The value of "offd" comes off the instance->rcv_buf[] and we used it as
the offset into an array.  The problem is that we check the upper bound
but not for negative values.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Local symbols referenced only in this file are made static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The current EHCI code sleeps a flat 110ms in the resume path if there
was a USB 1.1 device connected to its companion controller during
suspend, waiting for the device to reappear and reset so that it can be
handed back to the companion. This is necessary if the device uses
persist, so that the companion controller can actually see it during its
own resume path.

However, if the device doesn't use persist, this is entirely
unnecessary. We might just as well ignore it and have the normal device
detection/reset/handoff code handle it asynchronously when it eventually
shows up. As USB 1.1 devices are almost exclusively HIDs these days (for
which persist has no value), this can allow distros to shave another
tenth of a second off their resume time.

In order to enable this optimization, the patch also adds a new
usb_for_each_dev() iterator that is exported by the USB core and wraps
bus_for_each_dev() with the logic to differentiate between struct
usb_device and struct usb_interface on the usb_bus_type bus.
Signed-off-by: NJulius Werner <jwerner@chromium.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>

devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>