An image sequence number is added to the UBI erase-counter header
to be able determine if the root file system contains a mixture
of old and new images (because the flashing failed to complete).

A change to nolo is also needed for this to take effect.
Signed-off-by: NAdrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

The 'paranoid_check_empty()' is bogus because, which is easilly
seen on NOR flash, which has long erase cycles, and which may
easilly end-up with half-erased eraseblocks. In this case the
paranoid check fails. I is just wrong to assume that PEBs which
do not have EC headers always contain all 0xFF. Such assumption
should not be made on the I/O level, which is quite low.

Thus, just kill the check.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch adds code which makes sure eraseblocks contain all 0xFF
bytes before starting using them. The verification is done only when
debugging checks are enabled.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Terminate the UBI background thread prior to restarting the system.

[Artem: amended comments a little]
Signed-off-by: NKevin Cernekee <kpc.mtd@gmail.com>
Tested-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

The UBIFS WL worker may encounter read errors and there is logic
which makes a decision whether we should do one of:

1. cancel the operation and move the PEB with the read errors to
   the 'erroneous' list;
2. switch to R/O mode.

ATM, only -EIO errors trigger 1., other errors trigger 2. The idea
is that if we know we encountered an I/O error, do 1. Otherwise,
we do not know how to react, and do 2., just in case. E.g., if
the underlying driver became crazy because of a bug, we do not
want to harm any data, and switch to R/O mode.

This patch does 2 things:
1. Makes sure reads from the source PEB always cause 1. This is
   more consistent with other reads which come from the upper
   layers and never cause R/O.
2. Teaches UBI to do 1. also on -EBADMSG, UBI_IO_BAD_VID_HDR,
   -ENOMEM, and -ETIMEOUT. But this is only when reading the
   target PEB.

This preblems were hunted by Adrian Hunter.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Some of the typos were indicated by Adrian Hunter,
some by 'aspell'.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

'kmem_cache_free()' oopeses if NULL is passed, and there is
one error-path place where UBI may call it with NULL object.
This problem was pointed to by Adrian Hunter.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

When marking a PEB as bad, print how many PEBs are left reserved.
This is very useful information.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Print not only the PEB number, but also the LEB number and volume id,
which is very useful for bug hunting.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

[Artem: re-worked the patch: made it release resources when the
module is unloaded, made it do module referencing, made it really
independent on UBI, tested it with the UBI test-suite which can
be found in ubi-2.6.git/tests/ubi-tests, re-named most of the
funcs/variables to get rid of the "ubi" word and make names
consistent.]
Signed-off-by: NDmitry Pervushin <dpervushin@embeddedalley.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Remove built-in gluebi support. This is a preparation for a
standalone glubi module support
Signed-off-by: NDmitry Pervushin <dpervushin@embeddedalley.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

UBI volume notifications are intended to create the API to get clients
notified about volume creation/deletion, renaming and re-sizing. A
client can subscribe to these notifications using 'ubi_volume_register()'
and cancel the subscription using 'ubi_volume_unregister()'. When UBI
volumes change, a blocking notifier is called. Clients also can request
"added" events on all volumes that existed before client subscribed
to the notifications.

If we use notifications instead of calling functions like 'ubi_gluebi_xxx()',
we can make the MTD emulation layer to be more flexible: build it as a
separate module and load/unload it on demand.

[Artem: many cleanups, rework locking, add "updated" event, provide
 device/volume info in notifiers]
Signed-off-by: NDmitry Pervushin <dpervushin@embeddedalley.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch improves UBI errors handling. ATM UBI switches to
R/O mode when the WL worker fails to read the source PEB.
This means that the upper layers (e.g., UBIFS) has no
chances to unmap the erroneous PEB and fix the error.
This patch changes this behaviour and makes UBI put PEBs
like this into a separate RB-tree, thus preventing the
WL worker from hitting the same read errors again and
again.

But there is a 10% limit on a maximum amount of PEBs like this.
If there are too much of them, UBI switches to R/O mode.

Additionally, this patch teaches UBI not to panic and
switch to R/O mode if after a PEB has been copied, the
target LEB cannot be read back. Instead, now UBI cancels
the operation and schedules the target PEB for torturing.

The error paths has been tested by ingecting errors
into 'ubi_eba_copy_leb()'.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch fixes the error path in the WL worker - in same cases
UBI oopses when 'goto out_error' happens and e1 or e2 are NULL.
This patch also cleans up the error paths a little. And I have
tested nearly all error paths in the WL worker.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch is a clean-up and a preparation for the following
patches. It introduece constants for the return values of the
'ubi_eba_copy_leb()' function.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch fixes a minor problem where we may fail to wake
upe the UBI background thread. This is not fatal at all,
it may just result at sligtly worse performace for a short
period of time, just because the thread will be woken up
when real I/O on the UBI starts.

Anywey, the issue is the race condition between
'ubi_attach_mtd_dev()' and 'ubi_thread()'. If we do not
serialize them, the 'wake_up_process()' call may be done
before 'ubi_thread()' went seep, but after it checked
'ubi->thread_enabled'.

This issue was spotted by Shin Hong <hongshin@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

The @vol->upd_marker should be protected by the @ubi->device_mutex,
otherwise 'paranoid_check_volume()' complains sometimes because
vol->upd_marker is 1 while vtbl_rec->upd_marker is 0.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

If a volume paranoid check fails, do not return an error
code to the caller, but just print error messages and go
forward. The primary reason for this is that it is difficult
to recover and cancel the operation at that stage.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

I am experiencing an error in 'paranoid_check_volume()'. Add
dump_stack() there to make it easier to identify the reasons
of the error.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

When paranoid checs are enabled, the 'io_paral' test from the
'mtd-utils' package fails. The symptoms are:

UBI error: paranoid_check_all_ff: flash region at PEB 3973:512, length 15872 does not contain all 0xFF bytes
UBI error: paranoid_check_all_ff: paranoid check failed for PEB 3973
UBI: hex dump of the 512-16384 region

It turned out to be a bug in the checking function. Suppose there
are 2 tasks - A and B. Task A is the wear-levelling working
('wear_leveling_worker()'). It is reading the VID header to find
which LEB this PEB belongs to. Say, task A is reading header
of PEB X. Suppose PEB X is unmapped, and has no VID header.
Task B is trying to write to PEB X.

Task A: in 'ubi_io_read_vid_hdr()': reads the VID header from PEB X.
        The read data contain all 0xFF bytes.
Task B: writes VID header and some data to PEB X
Task A: assumes PEB X is empty, calls 'paranoid_check_all_ff()', which
        fails.

The solution for this problem is to make 'paranoid_check_all_ff()'
re-read the VID header, re-check it, and only if it is not there,
check the rest. This now implemented by the 'paranoid_check_empty()'
function.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

The @ubi->dbg_peb_buf is needed only when paranoid checks are
enabled, not when debugging in general is enabled.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Various minor improvements to the debugging messages which
I found useful while hunting problems.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

The mutex essencially protects the entire UBI device, so the
old @volumes_mutex name is a little misleading.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

The @mult_mutex does not serve any purpose. We already have
@volumes_mutex and it is enough. The @volume mutex is pushed
down to the 'ubi_rename_volumes()', because we want first
to open all volumes in the exclusive mode, and then lock the
mutex, just like all other ioctl's (remove, re-size, etc) do.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Now, we can call fsync() on an UBI volume.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Introduce a new ioctl UBI_IOCSETPROP to set properties
on a volume. Also add the first property:
UBI_PROP_DIRECT_WRITE, this property is used to set the
ability to use direct writes in userspace
Signed-off-by: NSidney Amani <seed@uffs.org>
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

GregKH asked to fix UBI which has fake device release method. Indeed,
we have to free UBI device description object from the release method,
because otherwise we'll oops is someone opens a UBI device sysfs file,
then the device is removed, and he reads the file. With this fix, he
will get -ENODEV instead of an oops.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Get rid of 'do_div()' and use more user-friendly primitives from
'linux/math64.h'.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

UBI ioctl's do not work when running 64-bit kernel and 32-bit
user-land. Fix this by adding the compat_ioctl method.

Also, UBI serializes all ioctls, so more than one ioctl at a time
is not a problem. Amd UBI does not seem to depend on anything else,
so use unlocked_ioctl instead of ioctl (no BKL needed).
Reported-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>

Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Some ioctl's in UBI are enabled only when debugging is switched
on. There is not particular reason for this, just noone needed
them. However, some people need the now for their user-space
development. Thus, allow these ioctl's even if UBI debugging
is disabled.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch adds ioctl to check if an LEB is mapped or not (as a
debugging option so far).

[Re-named ioctl to make it look the same as the other one and made
 some minor stylistic changes. Artem Bityutskiy.]
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch adds ioctl for the LEB unmap operation (as a debugging
option so far).

[Re-named ioctl to make it look the same as the other one and made
 some minor stylistic changes. Artem Bityutskiy.]
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch adds ioctl for the LEB map operation (as a debugging
option so far).

[Re-named ioctl to make it look the same as the other one and made
 some minor stylistic changes. Artem Bityutskiy.]
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

When I review ocfs2 code, find there are 2 typos to "successfull".  After
doing grep "successfull " in kernel tree, 22 typos found totally -- great
minds always think alike :)

This patch fixes all the similar typos. Thanks for Randy's ack and comments.
Signed-off-by: NColy Li <coyli@suse.de>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NRoland Dreier <rolandd@cisco.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Vlad Yasevich <vladislav.yasevich@hp.com>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CC: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- (better, more, bigger ...) then -> (...) than
Signed-off-by: NFrederik Schwarzer <schwarzerf@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Just minor indentation and "over 80 characters" fixes.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>