Use of_device_get_match_data() instead of open-coding it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use of_device_get_match_data() instead of open-coding it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use of_device_get_match_data() instead of open-coding it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use of_device_get_match_data() instead of open-coding it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use of_device_get_match_data() instead of open-coding it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use of_device_get_match_data() instead of open-coding it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use of_device_get_match_data() instead of open-coding it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use of_device_get_match_data() instead of open-coding it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use of_device_get_match_data() instead of open-coding it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use of_device_get_match_data() instead of open-coding it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use of_device_get_match_data() instead of open-coding it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use of_device_get_match_data() instead of open-coding it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use the SPDX license identifier for GPLv2.0 or later and remove the
license boilerplate.
Signed-off-by: NBartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The DesignWare GPIO IP can be configured for either 1 interrupt or 1
per GPIO in port A, but the driver currently only supports 1 interrupt.
See the DesignWare DW_apb_gpio Databook description of the
'GPIO_INTR_IO' parameter.

This change allows the driver to work with up to 32 interrupts, it will
get as many interrupts as specified in the DT 'interrupts' property.
It doesn't do anything clever with the different interrupts, it just calls
the same handler used for single interrupt hardware.

ACPI companion code provided by Hoan Tran <hotran@apm.com>. This was tested
on X-Gene by Hoan.
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NHoan Tran <hotran@apm.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Don't populate the const read-only arrays 'port' on the stack but
instead make them static. Makes the object code smaller:

Before:
  text    data     bss     dec    hex filename
  8542    4088     672   13302   33f6 drivers/gpio/gpio-gpio-mm.o
 10959    4952     832   16743   4167 drivers/gpio/gpio-104-dio-48e.o
  9022    5064    1408   15494   3c86 drivers/gpio/gpio-104-idi-48.o

After:
  text    data     bss     dec    hex filename
  8372    4144     672   13188   3384 drivers/gpio/gpio-gpio-mm.o
 10790    5008     832   16630   40f6 drivers/gpio/gpio-104-dio-48e.o
  8853    5152    1408   15413   3c35 linux/drivers/gpio/gpio-104-idi-48.o

(gcc version 7.2.0 x86_64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add compatible string for R-Car M3-N (r8a77965) in gpio-rcar.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is a driver so we should only include <linux/gpio/driver.h>.
However this driver was using gpio_get_value() to fetch the
current value of a GPIO used as IRQ line to determine trigger
direction, so we need a better way than looping over the
global GPIO numberspace.

Fix this by just calling the .get() function in the GPIO chip,
as we don't want to end up creating a consumer dependency
on ourselves.

Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The MVEBU driver is requesting GPIO descriptors from itself, which
is fine, but we have proper APIs to do this in a controlled way, so
stop calling into the private functions of the GPIO library and use
the gpiochip_* functions instead. Only include <linux/gpio/driver.h>
and <linux/gpio/consumer.h> since we are both producers and consumers
in this case.

Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is a driver so only include <linux/gpio/driver.h>.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is a driver so include only <linux/gpio/driver.h>.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is a driver so include only <linux/gpio/driver.h>.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is a driver so only include <linux/gpio/driver.h>.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is a driver so only include <linux/gpio/driver.h>.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is a driver so only include <linux/gpio/driver.h>.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is a driver so only include <linux/gpio/driver.h>.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is a driver so only include <linux/gpio/driver.h>.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is a driver so include only <linux/gpio/driver.h>.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is a driver so only include <linux/gpio/driver.h>.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This switches the Loongson driver over to using the bitops BIT()
macros and drops some local variables and make the code easier
to read (in my opinion).

Cc: Keguang Zhang <keguang.zhang@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

It is pretty helpful to create some kind of device for backing the
GPIO chips, especially when preparing the driver for using
GENERIC_GPIO, so let's create a simple platform device and a simple
platform device driver and create the gpiochip in the .probe() routine
for the device driver. Keep all at the core initcall so the behaviour
is the same as before.

Cc: Keguang Zhang <keguang.zhang@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The driver includes <linux/gpio.h> which is wrong, rely on
<linux/gpio/driver.h> and remove to call to gpio_set_value() in
favor of calling the internal function. Move functions around to
avoid forward declarations.

Cc: Keguang Zhang <keguang.zhang@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Board files constitute a significant part of the users of the legacy
GPIO framework. In many cases they only export a line and set its
desired value. We could use GPIO hogs for that like we do for DT and
ACPI but there's no support for that in machine code.

This patch proposes to extend the machine.h API with support for
registering hog tables in board files.
Signed-off-by: NBartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Don't populate the const read-only array 'ports' on the stack but instead
make it static. Makes the object code smaller by over 100 buytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  10959	   4952	    832	  16743	   4167	drivers/gpio/gpio-104-dio-48e.o

After:
   text	   data	    bss	    dec	    hex	filename
  10790	   5008	    832	  16630	   40f6	drivers/gpio/gpio-104-dio-48e.o

(gcc version 7.2.0 x86_64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Renesas RZ/G1C (R8A77470) SoC GPIO blocks are identical to the R-Car Gen2
family. Add support for its GPIO controllers.
Signed-off-by: NBiju Das <biju.das@bp.renesas.com>
Reviewed-by: NChris Paterson <chris.paterson2@renesas.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This patch will toggle the EIC level to emulate the edge trigger to
support PMIC EIC egdge trigger function, which is required by gpio-keys
driver.
Signed-off-by: NBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The Spreadtrum debounce EIC and latch EIC can not support edge trigger,
but most GPIO users (like gpio-key driver) only use the edge trigger,
thus the EIC driver need add some support to emulate the edge trigger
to satisfy this requirement.
Signed-off-by: NBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This adds a pointer to the CEC GPIO driver from the GPIO list of
examples of drivers on top of GPIO.

Cc: linux-media@vger.kernel.org
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Geert Uytterhoeven pointed out that the number of register was a
fixed upper bound so there's no need to use a dynamically allocated
array in place of a VLA. Use the defined upper bound.
Suggested-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Pull more btrfs updates from David Sterba:
 "We have queued a few more fixes (error handling, log replay,
  softlockup) and the rest is SPDX updates that touche almost all files
  so the diffstat is long"

* tag 'for-4.17-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: Only check first key for committed tree blocks
  btrfs: add SPDX header to Kconfig
  btrfs: replace GPL boilerplate by SPDX -- sources
  btrfs: replace GPL boilerplate by SPDX -- headers
  Btrfs: fix loss of prealloc extents past i_size after fsync log replay
  Btrfs: clean up resources during umount after trans is aborted
  btrfs: Fix possible softlock on single core machines
  Btrfs: bail out on error during replay_dir_deletes
  Btrfs: fix NULL pointer dereference in log_dir_items