- 18 9月, 2015 5 次提交
-
-
由 Eric W. Biederman 提交于
This is immediately motivated by the bridge code that chains functions that call into netfilter. Without passing net into the okfns the bridge code would need to guess about the best expression for the network namespace to process packets in. As net is frequently one of the first things computed in continuation functions after netfilter has done it's job passing in the desired network namespace is in many cases a code simplification. To support this change the function dst_output_okfn is introduced to simplify passing dst_output as an okfn. For the moment dst_output_okfn just silently drops the struct net. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Pass a network namespace parameter into the netfilter hooks. At the call site of the netfilter hooks the path a packet is taking through the network stack is well known which allows the network namespace to be easily and reliabily. This allows the replacement of magic code like "dev_net(state->in?:state->out)" that appears at the start of most netfilter hooks with "state->net". In almost all cases the network namespace passed in is derived from the first network device passed in, guaranteeing those paths will not see any changes in practice. The exceptions are: xfrm/xfrm_output.c:xfrm_output_resume() xs_net(skb_dst(skb)->xfrm) ipvs/ip_vs_xmit.c:ip_vs_nat_send_or_cont() ip_vs_conn_net(cp) ipvs/ip_vs_xmit.c:ip_vs_send_or_cont() ip_vs_conn_net(cp) ipv4/raw.c:raw_send_hdrinc() sock_net(sk) ipv6/ip6_output.c:ip6_xmit() sock_net(sk) ipv6/ndisc.c:ndisc_send_skb() dev_net(skb->dev) not dev_net(dst->dev) ipv6/raw.c:raw6_send_hdrinc() sock_net(sk) br_netfilter_hooks.c:br_nf_pre_routing_finish() dev_net(skb->dev) before skb->dev is set to nf_bridge->physindev In all cases these exceptions seem to be a better expression for the network namespace the packet is being processed in then the historic "dev_net(in?in:out)". I am documenting them in case something odd pops up and someone starts trying to track down what happened. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
The !CONFIG_NETFILTER definition of nf_hook_thresh calls okfn when the CONFIG_NETFITLER defintion does not, making it buggy. As the !CONFIG_NETFILTER defintion of nf_hook_thresh is not used remove it rather than fix it. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 9月, 2015 1 次提交
-
-
由 Daniel Borkmann 提交于
Fengguang reported, that some randconfig generated the following linker issue with nf_ct_zone_dflt object involved: [...] CC init/version.o LD init/built-in.o net/built-in.o: In function `ipv4_conntrack_defrag': nf_defrag_ipv4.c:(.text+0x93e95): undefined reference to `nf_ct_zone_dflt' net/built-in.o: In function `ipv6_defrag': nf_defrag_ipv6_hooks.c:(.text+0xe3ffe): undefined reference to `nf_ct_zone_dflt' make: *** [vmlinux] Error 1 Given that configurations exist where we have a built-in part, which is accessing nf_ct_zone_dflt such as the two handlers nf_ct_defrag_user() and nf_ct6_defrag_user(), and a part that configures nf_conntrack as a module, we must move nf_ct_zone_dflt into a fixed, guaranteed built-in area when netfilter is configured in general. Therefore, split the more generic parts into a common header under include/linux/netfilter/ and move nf_ct_zone_dflt into the built-in section that already holds parts related to CONFIG_NF_CONNTRACK in the netfilter core. This fixes the issue on my side. Fixes: 308ac914 ("netfilter: nf_conntrack: push zone object into functions") Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 7月, 2015 1 次提交
-
-
由 Pablo Neira Ayuso 提交于
085db2c0 ("netfilter: Per network namespace netfilter hooks.") introduced a new nf_hook_list that is global, so let's avoid this overlap. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 16 7月, 2015 2 次提交
-
-
由 Florian Westphal 提交于
This prepares for a TEE like expression in nftables. We want to ensure only one duplicate is sent, so both will use the same percpu variable to detect duplication. The other use case is detection of recursive call to xtables, but since we don't want dependency from nft to xtables core its put into core.c instead of the x_tables core. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Eric W. Biederman 提交于
- Add a new set of functions for registering and unregistering per network namespace hooks. - Modify the old global namespace hook functions to use the per network namespace hooks in their implementation, so their remains a single list that needs to be walked for any hook (this is important for keeping the hook priority working and for keeping the code walking the hooks simple). - Only allow registering the per netdevice hooks in the network namespace where the network device lives. - Dynamically allocate the structures in the per network namespace hook list in nf_register_net_hook, and unregister them in nf_unregister_net_hook. Dynamic allocate is required somewhere as the number of network namespaces are not fixed so we might as well allocate them in the registration function. The chain of registered hooks on any list is expected to be small so the cost of walking that list to find the entry we are unregistering should also be small. Performing the management of the dynamically allocated list entries in the registration and unregistration functions keeps the complexity from spreading. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 15 7月, 2015 1 次提交
-
-
由 Eric W. Biederman 提交于
The function obscures what is going on in nf_hook_thresh and it's existence requires computing the hook list twice. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 19 6月, 2015 1 次提交
-
-
由 Pablo Neira Ayuso 提交于
This pulls the full hook netfilter definitions from all those that include net_namespace.h. Instead let's just include the bare minimum required in the new linux/netfilter_defs.h file, and use it from the netfilter netns header files. I also needed to include in.h and in6.h from linux/netfilter.h otherwise we hit this compilation error: In file included from include/linux/netfilter_defs.h:4:0, from include/net/netns/netfilter.h:4, from include/net/net_namespace.h:22, from include/linux/netdevice.h:43, from net/netfilter/nfnetlink_queue_core.c:23: include/uapi/linux/netfilter.h:76:17: error: field ‘in’ has incomplete type struct in_addr in; And also explicit include linux/netfilter.h in several spots. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
-
- 14 5月, 2015 4 次提交
-
-
由 Pablo Neira 提交于
This patch adds the Netfilter ingress hook just after the existing tc ingress hook, that seems to be the consensus solution for this. Note that the Netfilter hook resides under the global static key that enables ingress filtering. Nonetheless, Netfilter still also has its own static key for minimal impact on the existing handle_ing(). * Without this patch: Result: OK: 6216490(c6216338+d152) usec, 100000000 (60byte,0frags) 16086246pps 7721Mb/sec (7721398080bps) errors: 100000000 42.46% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 25.92% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.81% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.62% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.70% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.34% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.44% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch: Result: OK: 6214833(c6214731+d101) usec, 100000000 (60byte,0frags) 16090536pps 7723Mb/sec (7723457280bps) errors: 100000000 41.23% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 26.57% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.72% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.55% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.78% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.06% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.43% kpktgend_0 [kernel.kallsyms] [k] __build_skb * Without this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9269001(c9268821+d179) usec, 100000000 (60byte,0frags) 10788648pps 5178Mb/sec (5178551040bps) errors: 100000000 40.99% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.50% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.77% kpktgend_0 [cls_u32] [k] u32_classify 5.62% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.18% kpktgend_0 [pktgen] [k] pktgen_thread_worker 3.23% kpktgend_0 [kernel.kallsyms] [k] tc_classify 2.97% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 1.83% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.50% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 0.99% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9308218(c9308091+d126) usec, 100000000 (60byte,0frags) 10743194pps 5156Mb/sec (5156733120bps) errors: 100000000 42.01% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.78% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.70% kpktgend_0 [cls_u32] [k] u32_classify 5.46% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.16% kpktgend_0 [pktgen] [k] pktgen_thread_worker 2.98% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.84% kpktgend_0 [kernel.kallsyms] [k] tc_classify 1.96% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.57% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk Note that the results are very similar before and after. I can see gcc gets the code under the ingress static key out of the hot path. Then, on that cold branch, it generates the code to accomodate the netfilter ingress static key. My explanation for this is that this reduces the pressure on the instruction cache for non-users as the new code is out of the hot path, and it comes with minimal impact for tc ingress users. Using gcc version 4.8.4 on: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 [...] L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 8192K Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira 提交于
In preparation to have netfilter ingress per-device hook list. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira 提交于
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira 提交于
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 4月, 2015 3 次提交
-
-
由 David Miller 提交于
On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Miller 提交于
It is currently always set to NULL, but nf_queue is adjusted to be prepared for it being set to a real socket by taking and releasing a reference to that socket when necessary. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Miller 提交于
This way we can consolidate where we setup new nf_hook_state objects, to make sure the entire thing is initialized. The only other place an nf_hook_object is instantiated is nf_queue, wherein a structure copy is used. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 4月, 2015 2 次提交
-
-
由 David S. Miller 提交于
Pass the nf_hook_state all the way down into the hook functions themselves. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Instead of passing a large number of arguments down into the nf_hook() entry points, create a structure which carries this state down through the hook processing layers. This makes is so that if we want to change the types or signatures of any of these pieces of state, there are less places that need to be changed. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 8月, 2014 1 次提交
-
-
由 Zhouyi Zhou 提交于
Use HAVE_JUMP_LABEL as elsewhere in the kernel to ensure that the toolchain has the required support in addition to CONFIG_JUMP_LABEL being set. Signed-off-by: NZhouyi Zhou <yizhouzhou@ict.ac.cn> Reviewed-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 14 10月, 2013 2 次提交
-
-
由 Patrick McHardy 提交于
This patch adds nftables which is the intended successor of iptables. This packet filtering framework reuses the existing netfilter hooks, the connection tracking system, the NAT subsystem, the transparent proxying engine, the logging infrastructure and the userspace packet queueing facilities. In a nutshell, nftables provides a pseudo-state machine with 4 general purpose registers of 128 bits and 1 specific purpose register to store verdicts. This pseudo-machine comes with an extensible instruction set, a.k.a. "expressions" in the nftables jargon. The expressions included in this patch provide the basic functionality, they are: * bitwise: to perform bitwise operations. * byteorder: to change from host/network endianess. * cmp: to compare data with the content of the registers. * counter: to enable counters on rules. * ct: to store conntrack keys into register. * exthdr: to match IPv6 extension headers. * immediate: to load data into registers. * limit: to limit matching based on packet rate. * log: to log packets. * meta: to match metainformation that usually comes with the skbuff. * nat: to perform Network Address Translation. * payload: to fetch data from the packet payload and store it into registers. * reject (IPv4 only): to explicitly close connection, eg. TCP RST. Using this instruction-set, the userspace utility 'nft' can transform the rules expressed in human-readable text representation (using a new syntax, inspired by tcpdump) to nftables bytecode. nftables also inherits the table, chain and rule objects from iptables, but in a more configurable way, and it also includes the original datatype-agnostic set infrastructure with mapping support. This set infrastructure is enhanced in the follow up patch (netfilter: nf_tables: add netlink set API). This patch includes the following components: * the netlink API: net/netfilter/nf_tables_api.c and include/uapi/netfilter/nf_tables.h * the packet filter core: net/netfilter/nf_tables_core.c * the expressions (described above): net/netfilter/nft_*.c * the filter tables: arp, IPv4, IPv6 and bridge: net/ipv4/netfilter/nf_tables_ipv4.c net/ipv6/netfilter/nf_tables_ipv6.c net/ipv4/netfilter/nf_tables_arp.c net/bridge/netfilter/nf_tables_bridge.c * the NAT table (IPv4 only): net/ipv4/netfilter/nf_table_nat_ipv4.c * the route table (similar to mangle): net/ipv4/netfilter/nf_table_route_ipv4.c net/ipv6/netfilter/nf_table_route_ipv6.c * internal definitions under: include/net/netfilter/nf_tables.h include/net/netfilter/nf_tables_core.h * It also includes an skeleton expression: net/netfilter/nft_expr_template.c and the preliminary implementation of the meta target net/netfilter/nft_meta_target.c It also includes a change in struct nf_hook_ops to add a new pointer to store private data to the hook, that is used to store the rule list per chain. This patch is based on the patch from Patrick McHardy, plus merged accumulated cleanups, fixes and small enhancements to the nftables code that has been done since 2009, which are: From Patrick McHardy: * nf_tables: adjust netlink handler function signatures * nf_tables: only retry table lookup after successful table module load * nf_tables: fix event notification echo and avoid unnecessary messages * nft_ct: add l3proto support * nf_tables: pass expression context to nft_validate_data_load() * nf_tables: remove redundant definition * nft_ct: fix maxattr initialization * nf_tables: fix invalid event type in nf_tables_getrule() * nf_tables: simplify nft_data_init() usage * nf_tables: build in more core modules * nf_tables: fix double lookup expression unregistation * nf_tables: move expression initialization to nf_tables_core.c * nf_tables: build in payload module * nf_tables: use NFPROTO constants * nf_tables: rename pid variables to portid * nf_tables: save 48 bits per rule * nf_tables: introduce chain rename * nf_tables: check for duplicate names on chain rename * nf_tables: remove ability to specify handles for new rules * nf_tables: return error for rule change request * nf_tables: return error for NLM_F_REPLACE without rule handle * nf_tables: include NLM_F_APPEND/NLM_F_REPLACE flags in rule notification * nf_tables: fix NLM_F_MULTI usage in netlink notifications * nf_tables: include NLM_F_APPEND in rule dumps From Pablo Neira Ayuso: * nf_tables: fix stack overflow in nf_tables_newrule * nf_tables: nft_ct: fix compilation warning * nf_tables: nft_ct: fix crash with invalid packets * nft_log: group and qthreshold are 2^16 * nf_tables: nft_meta: fix socket uid,gid handling * nft_counter: allow to restore counters * nf_tables: fix module autoload * nf_tables: allow to remove all rules placed in one chain * nf_tables: use 64-bits rule handle instead of 16-bits * nf_tables: fix chain after rule deletion * nf_tables: improve deletion performance * nf_tables: add missing code in route chain type * nf_tables: rise maximum number of expressions from 12 to 128 * nf_tables: don't delete table if in use * nf_tables: fix basechain release From Tomasz Bursztyka: * nf_tables: Add support for changing users chain's name * nf_tables: Change chain's name to be fixed sized * nf_tables: Add support for replacing a rule by another one * nf_tables: Update uapi nftables netlink header documentation From Florian Westphal: * nft_log: group is u16, snaplen u32 From Phil Oester: * nf_tables: operational limit match Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Patrick McHardy 提交于
Pass the hook ops to the hookfn to allow for generic hook functions. This change is required by nf_tables. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 27 9月, 2013 1 次提交
-
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com>
-
- 28 8月, 2013 1 次提交
-
-
由 Patrick McHardy 提交于
Split out sequence number adjustments from NAT and move them to the conntrack core to make them usable for SYN proxying. The sequence number adjustment information is moved to a seperate extend. The extend is added to new conntracks when a NAT mapping is set up for a connection using a helper. As a side effect, this saves 24 bytes per connection with NAT in the common case that a connection does not have a helper assigned. Signed-off-by: NPatrick McHardy <kaber@trash.net> Tested-by: NMartin Topholm <mph@one.com> Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 13 8月, 2013 1 次提交
-
-
由 Pablo Neira Ayuso 提交于
This patch adds the capability to attach expectations via nfnetlink_queue. This is required by conntrack helpers that trigger expectations based on the first packet seen like the TFTP and the DHCPv6 user-space helpers. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 01 8月, 2013 1 次提交
-
-
由 Patrick McHardy 提交于
Using 16 bits is too small, when many adjustments happen the offsets might overflow and break the connection. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 31 7月, 2013 1 次提交
-
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 23 5月, 2013 1 次提交
-
-
由 Pablo Neira Ayuso 提交于
Don't panic if we hit an error while adding the nf_log or pernet netfilter support, just bail out. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Acked-by: NGao feng <gaofeng@cn.fujitsu.com>
-
- 06 4月, 2013 1 次提交
-
-
由 Pablo Neira Ayuso 提交于
Now that this supports net namespace for nflog and nfqueue, we can remove the global proc_net_netfilter which has no clients anymore. Based on patch from Gao feng. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 13 10月, 2012 1 次提交
-
-
由 David Howells 提交于
Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-
- 30 8月, 2012 1 次提交
-
-
由 Patrick McHardy 提交于
Convert the IPv4 NAT implementation to a protocol independent core and address family specific modules. Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
- 22 6月, 2012 1 次提交
-
-
由 Pablo Neira Ayuso 提交于
LD init/built-in.o net/built-in.o:(.data+0x4408): undefined reference to `nf_nat_tcp_seq_adjust' make: *** [vmlinux] Error 1 This patch adds a new pointer hook (nfq_ct_nat_hook) similar to other existing in Netfilter to solve our complicated configuration dependencies. Reported-by: NValdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 21 6月, 2012 1 次提交
-
-
由 Pablo Neira Ayuso 提交于
This removes some sparse warnings. Reported-by: NFengguang Wu <wfg@linux.intel.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 16 6月, 2012 2 次提交
-
-
由 Pablo Neira Ayuso 提交于
User-space programs that receive traffic via NFQUEUE may mangle packets. If NAT is enabled, this usually puzzles sequence tracking, leading to traffic disruptions. With this patch, nfnl_queue will make the corresponding NAT TCP sequence adjustment if: 1) The packet has been mangled, 2) the NFQA_CFG_F_CONNTRACK flag has been set, and 3) NAT is detected. There are some records on the Internet complaning about this issue: http://stackoverflow.com/questions/260757/packet-mangling-utilities-besides-iptables By now, we only support TCP since we have no helpers for DCCP or SCTP. Better to add this if we ever have some helper over those layer 4 protocols. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
This patch allows you to include the conntrack information together with the packet that is sent to user-space via NFQUEUE. Previously, there was no integration between ctnetlink and nfnetlink_queue. If you wanted to access conntrack information from your libnetfilter_queue program, you required to query ctnetlink from user-space to obtain it. Thus, delaying the packet processing even more. Including the conntrack information is optional, you can set it via NFQA_CFG_F_CONNTRACK flag with the new NFQA_CFG_FLAGS attribute. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 07 6月, 2012 1 次提交
-
-
由 Denys Fedoryshchenko 提交于
The mask option allows you put all address belonging that mask into the same recent slot. This can be useful in case that recent is used to detect attacks from the same network segment. Tested for backward compatibility. Signed-off-by: NDenys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 21 4月, 2012 1 次提交
-
-
由 Eric W. Biederman 提交于
We don't use struct ctl_path anymore so delete the exported constants. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 2月, 2012 1 次提交
-
-
由 Ingo Molnar 提交于
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NJason Baron <jbaron@redhat.com> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.huSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 11月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
On configs where CONFIG_JUMP_LABEL=y, we can replace in fast path a load/compare/conditional jump by a single jump with no dcache reference. Jump target is modified as soon as nf_hooks[pf][hook] switches from empty state to non empty states. jump_label state is kept outside of nf_hooks array so has no cost on cpu caches. This patch removes the test on CONFIG_NETFILTER_DEBUG : No need to call nf_hook_slow() at all if nf_hooks[pf][hook] is empty, this didnt give useful information, but slowed down things a lot. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Patrick McHardy <kaber@trash.net> CC: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-