When restoring the PPR value, we incorrectly access the thread structure
at a time where MSR:RI is clear, which means we cannot recover from nested
faults. However the thread structure isn't covered by the "bolted" SLB
entries and thus accessing can fault.

This fixes it by splitting the code so that the PPR value is loaded into
a GPR before MSR:RI is cleared.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We're assigning PE numbers after the completion of PCI probe. During
the PCI probe, we had PE#0 as the super container to encompass all
PCI devices. However, that's inappropriate since PELTM has ascending
order of priority on search on P7IOC. So we need PE#127 takes the
role that PE#0 has previously. For PHB3, we still have PE#0 as the
reserved PE.

The patch supposes that the underly firmware has built the RID to
PE# mapping after resetting IODA tables: all PELTM entries except
last one has invalid mapping on P7IOC, but all RTEs have binding
to PE#0. The reserved PE# is being exported by firmware by device
tree.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We need add PE to its own PELTV. Otherwise, the errors originated
from the PE might contribute to other PEs. In the result, we can't
clear up the error successfully even we're checking and clearing
errors during access to PCI config space.

Cc: stable@vger.kernel.org
Reported-by: kalshett@in.ibm.com
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Indirect XSCOM addresses normally have the top bit set (of the 64-bit
address). This doesn't work via the normal debugfs interface, so we use
a different encoding, which we need to convert before calling OPAL.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The current debugfs interface to scom is essentially unused
and racy. It uses two different files "address" and "data"
to perform accesses which is at best impractical for anything
but manual use by a developer.

This replaces it with an "access" file which represent the entire
scom address space which can be lseek/read/writen too.

This file only supports accesses that are 8 bytes aligned and
multiple of 8 bytes in size. The offset is logically the SCOM
address multiplied by 8.

Since nothing in userspace exploits that file at the moment, the ABI
change is a no-brainer.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On P8, XSCOM addresses has a special "indirect" form that
requires more than 32-bits, so let's use u64 everywhere in
the code instead of u32.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The wrapper script needs an explicit rule for the "of" boot
wrapper (generic wrapper, similar to pseries). Before
0c9fa291 it was hanlded
implicitly by the statement:

platformo=$object/"$platform".o

But now that epapr.o needs to be added, that doesn't work
and an explicit rule must be added.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

commit b6069a95 (filter: add MOD operation) added generic
support for modulus operation in BPF.

This patch brings JIT support for PPC64
Signed-off-by: NVladimir Murzin <murzin.v@gmail.com>
Acked-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently DIVWU stands for *signed* divw opcode:

7d 2a 4b 96 	divwu   r9,r10,r9
7d 2a 4b d6 	divw    r9,r10,r9

Use the *unsigned* divw opcode for DIVWU.
Suggested-by: NVassili Karpov <av1474@comtv.ru>
Reviewed-by: NVassili Karpov <av1474@comtv.ru>
Signed-off-by: NVladimir Murzin <murzin.v@gmail.com>
Acked-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Since the definition of_find_next_cache_node is architecture independent,
the existing definition in powerpc can be moved to driver/of/base.c

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: NSudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently big endianness of the device tree data is assumed in
of_find_next_cache_node for 'handle' when calling of_find_node_by_phandle.

In preparation to move this function to common code, this patch fixes
the endianness using 'be32_to_cpup'

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: NSudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We currently turn IRQs off in __switch_to(0 but this is unnecessary as it's
already disabled in the caller.

This removes the IRQ disable but adds a check to make sure it is really off
in case this changes in future.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This is an optimization for the PowerPC in 64-bit
little-endian. Bit counting is used in find_zero(), instead
of the multiply and shift.

It is modelled after Alan Modra's PowerPC LE strlen patch
http://sourceware.org/ml/libc-alpha/2013-08/msg00097.html.
Signed-off-by: NPhilippe Bergheaud <felix@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This enables the Berkeley Packet Filter JIT compiler
for the PowerPC running in 64bit Little Endian.
Signed-off-by: NPhilippe Bergheaud <felix@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently, when not in hypervisor mode the kernel
Oopses during suspend or hibernation when accessing
the SDR1 register, because it is only available
in hypervisor mode.  Access to it needs to be
protected in BEGIN/END_FW_FTR_SECTION.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-by: NJimmy Pan <jipan@redhat.com>
Tested-by: NJimmy Pan <jipan@redhat.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When reading partitions, the length has to be translated from
big endian to the endian order of the host. Similarly, when writing
partitions, the length needs to be in big endian order.

The userspace tool 'nvram' needs a similar fix as it is reading
and writing partitions through /dev/nram :

    http://sourceforge.net/p/powerpc-utils/mailman/message/31571277/Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

nvram_scan_partitions() is called twice when initializing the "lnx,oops-log"
partition and the "ibm,rtas-log" partition. This fills the partition list
with duplicate entries. This patch moves the partition scan in the init
routine pseries_nvram_init_log_partitions() which is called only once.
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Several functions are only ever referenced locally, so make them static.
Of those functions, many of them are protected by an #if. However, the
code which can compile fine in either case.

Now that (1) the unneeded code is marked 'static' and (2) the code is
only used under a C 'if (IS_ENABLED(CONFIG_FB_FSL_DIU))', the compiler
can automatically remove the unneeded code, and we don't need the #if or
the empty stub functions.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

The MPC5200 LPBFIFO driver requires the bestcomm module to be
enabled, otherwise building will fail. Fix it.

Cc: <stable@vger.kernel.org> # 3.10+
Reported-by: NWolfgang Denk <wd@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

This more or less reverts commit 6391f697.
Instead of adding an unneeded 'default', mark the variable to prevent
the false positive 'uninitialized var'. The other change (fixing the
printout) needs revert, too. We want to know WHICH critical irq failed,
not which level it had.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Anatolij Gustschin <agust@denx.de>
Acked-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

a disabled Kconfig option results in a reference to a not implemented
routine when the IS_ENABLED() macro is used for both conditional
implementation of the routine as well as a C language source code test
at the call site -- the "if (0) func();" construct only gets eliminated
later by the optimizer, while the compiler already has emitted its
warning about "func()" being undeclared

provide an empty implementation for the mpc512x_setup_diu() and
mpc512x_init_diu() routines in case of the disabled option, to avoid the
compiler warning which is considered fatal and breaks compilation

the bug appeared with commit 2abbbb63
"powerpc/mpc512x: move common code to shared.c file", how to reproduce:

  make mpc512x_defconfig
  echo CONFIG_FB_FSL_DIU=n >> .config && make olddefconfig
  make

    CC      arch/powerpc/platforms/512x/mpc512x_shared.o
  .../arch/powerpc/platforms/512x/mpc512x_shared.c: In function 'mpc512x_init_early':
  .../arch/powerpc/platforms/512x/mpc512x_shared.c:456:3: error: implicit declaration of function 'mpc512x_init_diu' [-Werror=implicit-function-declaration]
  .../arch/powerpc/platforms/512x/mpc512x_shared.c: In function 'mpc512x_setup_arch':
  .../arch/powerpc/platforms/512x/mpc512x_shared.c:469:3: error: implicit declaration of function 'mpc512x_setup_diu' [-Werror=implicit-function-declaration]
  cc1: all warnings being treated as errors
  make[4]: *** [arch/powerpc/platforms/512x/mpc512x_shared.o] Error 1
Signed-off-by: NGerhard Sittig <gsi@denx.de>
CC: <stable@vger.kernel.org> # v3.11
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Code update interface for powernv platform. This provides
sysfs interface to pass new image, validate, update and
commit images.

This patch includes:
  - Below OPAL APIs for code update
    - opal_validate_flash()
    - opal_manage_flash()
    - opal_update_flash()

  - Create below sysfs files under /sys/firmware/opal
    - image		: Interface to pass new FW image
    - validate_flash	: Validate candidate image
    - manage_flash	: Commit/Reject operations
    - update_flash	: Flash new candidate image

Updating Image:
  "update_flash" is an interface to indicate flash new FW.
It just passes image SG list to FW. Actual flashing is done
during system reboot time.

Note:
  - SG entry format:
    I have kept version number to keep this list similar to what
    PAPR is defined.
Signed-off-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Create /sys/firmware/opal directory. We wil use this
interface to fetch opal error logs, firmware update, etc.
Signed-off-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add a VMX optimised xor, used primarily for RAID5. On a POWER7 blade
this is a decent win:

   32regs    : 17932.800 MB/sec
   altivec   : 19724.800 MB/sec

The bigger gain is when the same test is run in SMT4 mode, as it
would if there was a lot of work going on:

   8regs     :  8377.600 MB/sec
   altivec   : 15801.600 MB/sec

I tested this against an array created without the patch, and also
verified it worked as expected on a little endian kernel.

[ Fix !CONFIG_ALTIVEC build -- BenH ]
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Correct reference to the location of the kexec_sequence() assembly helper.
There never was a kexec_stub.S in mainline.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The condition register (CR) is a 32 bit quantity so we should use
32 bit loads and stores.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Enable a few modules required to boot on a POWER multipath
box.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Run savedefconfig over the ppc64, ppc64e and pseries config
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Using -mcpu=power7 allows gcc to use a number of new instructions
including 64 bit byte reversed loads.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

commit f13c13a0 (powerpc: Stop using non-architected shared_proc
field in lppaca) fixed a potential issue with shared/dedicated
partition detection. The old method of detection relied on an
unarchitected field (shared_proc), and this patch switched
to using something architected (a non zero yield_count).

Unfortunately the assertion in the Linux header that yield_count
is only non zero on shared processor partitions is not true. It
turns out dedicated processor partitions can increment yield_count
and as such we falsely detect dedicated partitions as shared.

Fix the comment, and switch back to using the old method.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch addresses unaligned single precision floating point loads
and stores in the single-step code.  The old implementation
improperly treated an 8 byte structure as an array of two 4 byte
words, which is a classic little endian bug.
Signed-off-by: NTom Musta <tmusta@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch modifies the unaligned access routines of the sstep.c
module so that it properly reverses the bytes of storage operands
in the little endian kernel kernel.   This is implemented by
breaking an unaligned little endian access into a combination of
single byte accesses plus an overal byte reversal operation.
Signed-off-by: NTom Musta <tmusta@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch enables alignment handling for the load/store floating point
pair instructions (lfdp, lfdpx, stfdp, stfdpx).  The handler routine
is properly coded and only needs to be enabled.
Signed-off-by: NTom Musta <tmusta@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The alignment handler is incorrect for unaligned string instructions
in little endian mode.  These instructions access data as arrays of
bytes and thus are endian neutral.  However, the routine also handles
the load/store multiple instructions, which are NOT endian neutral.

This patch toggles the byte swapping flag for the string instructions
in little endian builds.  This effectively disables the byte swapping
logic.
Signed-off-by: NTom Musta <tmusta@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This issue was causing the QEMU emulated USB device to fail dring
PCI probe.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit e82b89a6 used strcat instead of
strcpy which can result in an overflow of newlines on the buffer.

Signed-off-by: Prarit Bhargava
Cc: benh@kernel.crashing.org
Cc: ben@decadent.org.uk
Cc: stable@vger.kernel.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

PPC44x supports page sizes other than 4K however when 64K page sizes
are selected compilation fails. This is due to a change in the
definition of pgtable_t introduced by the following patch:

commit 5c1f6ee9
Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
powerpc: Reduce PTE table memory wastage

The above patch only implements the new layout for PPC64 so it doesn't
compile for PPC32 with a 64K page size. Ideally we should implement
the same layout for PPC32 however for the meantime this patch reverts
the definition of pgtable_t for PPC32.
Signed-off-by: NAlistair Popple <alistair@popple.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>