...and also remove the associated nfs_v4_clientops entry.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

It is only used internally by the RPC code.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

rpc_sockaddr2uaddr is only used by net/sunrpc/rpcb_clnt.c, where
it is used in a non-blockable context in at least one case.

Add non-blocking capability by adding a gfp_t argument
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

commit ae50c0b5 "pnfs: client stats" added additional information to
the output of /proc/self/mountstats. The new functions introduced are
only used in this file and should be marked static.

If CONFIG_NFS_V4_1 is not defined, empty stub functions are used.  If
CONFIG_NFS_V4 is not defined these stub functions are not used at all.
Adding static for the functions results in compile warnings:

fs/nfs/super.c:743: warning: 'show_sessions' defined but not used
fs/nfs/super.c:756: warning: 'show_pnfs' defined but not used

Fix this by adding a #ifdef CONFIG_NFS_V4 guard around the two
show_ functions.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We should check if the sector is already initialized before
trying to grab the page from page cache. Otherwise when two
pages of the same block are written back by two threads each
calling from writepage_locked, it can cause deadlock like bellow.

 [ 1080.972099] INFO: task kswapd0:25 blocked for more than 120 seconds.
 [ 1080.972377] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 [ 1080.972812] kswapd0         D ffff88000c4926c0     0    25      2 0x00000000
 [ 1080.972816]  ffff88000df276b0 0000000000000046 ffff88000df27640 ffffffff81013ba7
 [ 1080.972821]  ffff88000c492310 ffff88000df27fd8 ffff88000df27fd8 00000000001d3440
 [ 1080.972824]  ffff88000c378000 ffff88000c492310 ffff8800175d3d40 ffff880017fc75a8
 [ 1080.972828] Call Trace:
 [ 1080.972860]  [<ffffffff81013ba7>] ? read_tsc+0x9/0x19
 [ 1080.972877]  [<ffffffff810e0b23>] ? lock_page+0x2b/0x2b
 [ 1080.972899]  [<ffffffff81475a1d>] io_schedule+0x63/0x7e
 [ 1080.972902]  [<ffffffff810e0b31>] sleep_on_page+0xe/0x12
 [ 1080.972905]  [<ffffffff81475fe8>] __wait_on_bit_lock+0x46/0x8f
 [ 1080.972916]  [<ffffffff810822d7>] ? lock_release_holdtime.part.7+0x6b/0x72
 [ 1080.972919]  [<ffffffff810e0af6>] __lock_page+0x66/0x68
 [ 1080.972928]  [<ffffffff81072705>] ? autoremove_wake_function+0x3d/0x3d
 [ 1080.972932]  [<ffffffff810e0b1f>] lock_page+0x27/0x2b
 [ 1080.972934]  [<ffffffff810e0bcf>] find_lock_page+0x34/0x57
 [ 1080.972937]  [<ffffffff810e1738>] find_or_create_page+0x34/0x8a
 [ 1080.972947]  [<ffffffffa034245b>] bl_write_pagelist+0x205/0x6da [blocklayoutdriver]
 [ 1080.972951]  [<ffffffffa034145d>] ? bl_free_lseg+0x38/0x38 [blocklayoutdriver]
 [ 1080.972995]  [<ffffffffa02e27b9>] ? nfs_write_rpcsetup+0x118/0x123 [nfs]
 [ 1080.973033]  [<ffffffffa030246b>] pnfs_generic_pg_writepages+0x10b/0x1f4 [nfs]
 [ 1080.973089]  [<ffffffffa02deaae>] nfs_pageio_doio+0x1a/0x43 [nfs]
 [ 1080.973098]  [<ffffffffa02df035>] nfs_pageio_complete+0x16/0x2d [nfs]
 [ 1080.973108]  [<ffffffffa02e2d8f>] nfs_writepage_locked+0xa0/0xbf [nfs]
 [ 1080.973119]  [<ffffffffa02e36a1>] nfs_writepage+0x16/0x2b [nfs]
 [ 1080.973122]  [<ffffffff810e8762>] ? clear_page_dirty_for_io+0x87/0x9a
 [ 1080.973133]  [<ffffffff810efc5b>] shrink_page_list+0x39b/0x6c8
 [ 1080.973139]  [<ffffffff810f03bb>] shrink_inactive_list+0x22c/0x39e
 [ 1080.973144]  [<ffffffff810822d7>] ? lock_release_holdtime.part.7+0x6b/0x72
 [ 1080.973148]  [<ffffffff810f0c33>] shrink_zone+0x445/0x588
 [ 1080.973152]  [<ffffffff810f1a11>] balance_pgdat+0x2c2/0x56b
 [ 1080.973170]  [<ffffffff81254208>] ? __bitmap_weight+0x34/0x80
 [ 1080.973175]  [<ffffffff810f1f78>] kswapd+0x2be/0x2fa
 [ 1080.973179]  [<ffffffff810726c8>] ? __init_waitqueue_head+0x4b/0x4b
 [ 1080.973183]  [<ffffffff810f1cba>] ? balance_pgdat+0x56b/0x56b
 [ 1080.973187]  [<ffffffff81071f69>] kthread+0xa8/0xb0
 [ 1080.973200]  [<ffffffff814806b4>] kernel_thread_helper+0x4/0x10
 [ 1080.973205]  [<ffffffff81071ec1>] ? __init_kthread_worker+0x5a/0x5a
 [ 1080.973210]  [<ffffffff814806b0>] ? gs_change+0x13/0x13
 [ 1080.973213] no locks held by kswapd0/25.
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

bl_add_page_to_bio returns error pointer. bio should be reset to
NULL in failure cases as the out path always calls bl_submit_bio.
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

For pnfs pagelist read failure, we need to pg_recoalesce and resend IO to
mds.
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

For pnfs pagelist write failure, we need to pg_recoalesce and resend IO to
mds.
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

file layout and block layout both use it to set mark layout io failure
bit. So make it generic.
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The same function is used by idmap, gss and blocklayout code. Make it
generic.
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Make the status field explicitly 32 bits.  "...it's unlikely that the kernel
and userspace would differ on the size of an int here, but it might be a
good idea to go ahead and make that explicitly 32 bits in case we end up
dealing with more exotic arches at some point in the future."
Suggested-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Cc: stable@kernel.org [3.0]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Always return PTR_ERR, not NULL, from nfs4_blk_get_deviceinfo and
nfs4_blk_decode_device.

Check for IS_ERR, not NULL, in bl_set_layoutdriver when calling
nfs4_blk_get_deviceinfo.
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Cc: stable@kernel.org [3.0]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

nfs_find_and_lock_request will take a reference to the nfs_page and
will then put it if the req is already locked. It's possible though
that the reference will be the last one. That put then can kick off
a whole series of reference puts:

nfs_page
   nfs_open_context
      dentry
          inode

If the inode ends up being deleted, then the VFS will call
truncate_inode_pages. That function will try to take the page lock, but
it was already locked when migrate_page was called. The code
deadlocks.

Fix this by simply refusing the migration request if PagePrivate is
already set, indicating that the page is already associated with an
active read or write request.

We've had a customer test a backported version of this patch and
the preliminary results seem good.

Cc: stable@kernel.org
Cc: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: NHarshula Jayasuriya <harshula@redhat.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The result from ipv6_addr_scope() always not be a single SCOPE,
so we can't use equal to compare the result with IPV6_ADDR_SCOPE_LINKLOCAL
at nfs_sockaddr_match_ipaddr6.

This patch fixs the problem, and lets checking address before scope_id.
Signed-off-by: NMi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

commit 420e3646 allowed the kernel to reduce the number of unnecessary
commit calls by skipping the commit when there are a large number of
outstanding pages.

However, the current test in nfs_commit_unstable_pages does not handle
the edge condition properly. When ncommit == 0, then that means that the
kernel doesn't need to do anything more for the inode. The current test
though in the WB_SYNC_NONE case will return true, and the inode will end
up being marked dirty. Once that happens the inode will never be clean
until there's a WB_SYNC_ALL flush.

Fix this by immediately returning from nfs_commit_unstable_pages when
ncommit == 0.

Mike noticed this problem initially in RHEL5 (2.6.18-based kernel) which
has a backported version of 420e3646. The inode cache there was growing
very large. The inode cache was unable to be shrunk since the inodes
were all marked dirty. Calling sync() would essentially "fix" the
problem -- the WB_SYNC_ALL flush would result in the inodes all being
marked clean.

What I'm not clear on is how big a problem this is in mainline kernels
as the writeback code there is very different. Either way, it seems
incorrect to re-mark the inode dirty in this case.
Reported-by: NMike McLean <mikem@redhat.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Cc: stable@kernel.org [2.6.34+]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This reverts commit b80c3cb6.

The reverted commit was rendered obsolete by a VFS fix: commit
5547e8aa (writeback: Update dirty flags in
two steps). We now no longer need to worry about writeback_single_inode()
missing our marking the inode for COMMIT in 'do_writepages()' call.

Reverting this patch, fixes a performance regression in which the inode
would continuously get queued to the dirty list, causing the writeback
code to unnecessarily try to send a COMMIT.

Signed-off-by: Trond Myklebust <Trond.Myklebust>
Tested-by: NSimon Kirby <sim@hostway.ca>
Cc: stable@kernel.org [2.6.35+]

The size is always valid, but variable-length arrays generate worse code
for no good reason (unless the function happens to be inlined and the
compiler sees the length for the simple constant it is).

Also, there seems to be some code generation problem on POWER, where
Henrik Bakken reports that register r28 can get corrupted under some
subtle circumstances (interrupt happening at the wrong time?).  That all
indicates some seriously broken compiler issues, but since variable
length arrays are bad regardless, there's little point in trying to
chase it down.

"Just don't do that, then".
Reported-by: NHenrik Grindal Bakken <henribak@cisco.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: 7128/1: vic: Don't write to the read-only register VIC_IRQ_STATUS
  ARM: 7122/1: localtimer: add header linux/errno.h explicitly
  ARM: 7117/1: perf: fix HW_CACHE_* events on Cortex-A9
  ARM: 7113/1: mm: Align bank start to MAX_ORDER_NR_PAGES

This is unneeded and causes an abort on the SPMP8000 platform.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NZoltan Devai <zoss@devai.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Per the text in  Documentation/SubmitChecklist as below, we should
explicitly have header linux/errno.h in localtimer.h for ENXIO
reference.

1: If you use a facility then #include the file that defines/declares
   that facility.  Don't depend on other header files pulling in ones
   that you use.

Otherwise, we may run into some compiling error like the following one,
if any file includes localtimer.h without CONFIG_LOCAL_TIMERS defined.

  arch/arm/include/asm/localtimer.h: In function ‘local_timer_setup’:
  arch/arm/include/asm/localtimer.h:53:10: error: ‘ENXIO’ undeclared (first use in this function)
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Using COHERENT_LINE_{MISS,HIT} for cache misses and references
respectively is completely wrong. Instead, use the L1D events which
are a better and more useful approximation despite ignoring instruction
traffic.
Reported-by: NAlasdair Grant <alasdair.grant@arm.com>
Reported-by: NMatt Horsnell <matt.horsnell@arm.com>
Reported-by: NMichael Williams <michael.williams@arm.com>
Cc: stable@kernel.org
Cc: Jean Pihet <j-pihet@ti.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (w83627ehf) Properly report thermal diode sensors

* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
  gpio-pca953x: fix gpio_base
  gpio/omap: fix build error with certain OMAP1 configs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: revert to using a kthread for AIL pushing
  xfs: force the log if we encounter pinned buffers in .iop_pushbuf
  xfs: do not update xa_last_pushed_lsn for locked items

* 'stable' of git://github.com/cmetcalf-tilera/linux-tile:
  tile: revert change from <asm/atomic.h> to <linux/atomic.h> in asm files

* 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  x86: Default to vsyscall=native for now

SFI tables reside in RAM and should not be modified once they are
written.  Current code went to set pentry->irq to zero which causes
subsequent reads to fail with invalid SFI table checksum.  This will
break kexec as the second kernel fails to validate SFI tables.

To fix this we use temporary variable for irq number.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The w83627ehf driver is improperly reporting thermal diode sensors as
type 2, instead of 3. This caused "sensors" and possibly other
monitoring tools to report these sensors as "transistor" instead of
"thermal diode".

Furthermore, diode subtype selection (CPU vs. external) is only
supported by the original W83627EHF/EHG. All later models only support
CPU diode type, and some (NCT6776F) don't even have the register in
question so we should avoid reading from it.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

gpio_base was set to 0 if no system platform data or open firmware
platform data was provided. This led to conflicts, if any other gpiochip
with a gpiobase of 0 was instantiated already. Setting it to -1 will
automatically use the first one available.
Signed-off-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

With commit f64ad1a0, "gpio/omap: cleanup _set_gpio_wakeup(), remove
ifdefs", access to build time conditionally omitted 'suspend_wakeup'
member of the 'gpio_bank' structure has been placed unconditionally in
function _set_gpio_wakeup(), which is always built. This resulted in the
driver compilation broken for certain OMAP1, i.e., non-OMAP16xx,
configurations.

Really required or not in previously excluded cases, define this
structure member unconditionally as a fix.

Tested with a custom OMAP1510 only configuration.
Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NKevin Hilman <khilman@ti.com>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

The 32-bit TILEPro support uses some #defines in <asm/atomic_32.h>
for atomic support routines in assembly.  To make this more explicit,
I've turned those includes into includes of <asm/atomic_32.h>, which
should hopefully make it clear that they shouldn't be bombed into
<linux/atomic.h> in any cleanups.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  mscan: too much data copied to CAN frame due to 16 bit accesses
  gro: refetch inet6_protos[] after pulling ext headers
  bnx2x: fix cl_id allocation for non-eth clients for NPAR mode
  mlx4_en: fix endianness with blue frame support

Fix file references in drivers/ide/

There are a lot of file references to now moved or deleted files in the
whole tree, especially in documentation and Kconfig files.  This patch
fixes the references in drivers/ide/.
Signed-off-by: NJohann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'btrfs-3.0' of git://github.com/chrismason/linux:
  Btrfs: make sure not to defrag extents past i_size
  Btrfs: fix recursive auto-defrag

Currently we have a few issues with the way the workqueue code is used to
implement AIL pushing:

 - it accidentally uses the same workqueue as the syncer action, and thus
   can be prevented from running if there are enough sync actions active
   in the system.
 - it doesn't use the HIGHPRI flag to queue at the head of the queue of
   work items

At this point I'm not confident enough in getting all the workqueue flags and
tweaks right to provide a perfectly reliable execution context for AIL
pushing, which is the most important piece in XFS to make forward progress
when the log fills.

Revert back to use a kthread per filesystem which fixes all the above issues
at the cost of having a task struct and stack around for each mounted
filesystem.  In addition this also gives us much better ways to diagnose
any issues involving hung AIL pushing and removes a small amount of code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NStefan Priebe <s.priebe@profihost.ag>
Tested-by: NStefan Priebe <s.priebe@profihost.ag>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

We need to check for pinned buffers even in .iop_pushbuf given that inode
items flush into the same buffers that may be pinned directly due operations
on the unlinked inode list operating directly on buffers.  To do this add a
return value to .iop_pushbuf that tells the AIL push about this and use
the existing log force mechanisms to unpin it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NStefan Priebe <s.priebe@profihost.ag>
Tested-by: NStefan Priebe <s.priebe@profihost.ag>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

If an item was locked we should not update xa_last_pushed_lsn and thus skip
it when restarting the AIL scan as we need to be able to lock and write it
out as soon as possible.  Otherwise heavy lock contention might starve AIL
pushing too easily, especially given the larger backoff once we moved
xa_last_pushed_lsn all the way to the target lsn.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NStefan Priebe <s.priebe@profihost.ag>
Tested-by: NStefan Priebe <s.priebe@profihost.ag>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>