- 18 4月, 2013 1 次提交
-
-
由 Daniel Mack 提交于
This patch adds two formats for Direct Stream Digital (DSD), a pulse-density encoding format which is described here: https://en.wikipedia.org/wiki/Direct_Stream_Digital DSD operates on 2.8, 5.6 or 11.2MHz sample rates and as a 1-bit stream. The two new types added by this patch describe streams that are capable of handling DSD samples in DOP format as 8-bit or in 16-bit (or at a x8 or x16 data rate, respectively). DSD itself specifies samples in *bit*, while DOP and ALSA handle them as *bytes*. Hence, a factor of 8 or 16 has to be applied for the sample rare configuration, according to the following table: configured hardware 176.4KHz 352.8kHz 705.6KHz <---- sample rate 8-bit 2.8MHz 5.6MHz 16-bit 2.8Mhz 5.6MHz 11.2MHz `-----------------------------' actual DSD sample rates Signed-off-by: NDaniel Mack <zonque@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 11月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
USB audio class 2 has more channel map positions than we currently have. Let's add missing definitions. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 10月, 2012 1 次提交
-
-
由 Clemens Ladisch 提交于
Commit 4eeaaeae (ALSA: core: add hooks for audio timestamps) added the new audio_tstamp field to struct snd_pcm_status. However, struct timespec requires 64-bit alignment, so the 64-bit compiler would insert 32 bits of padding before this field, which broke SNDRV_PCM_IOCTL_STATUS with error messages like this: kernel: unknown ioctl = 0x80984120 To solve this, insert the padding explicitly so that it can be taken into account when calculating the ABI structure size. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 10月, 2012 1 次提交
-
-
由 Pierre-Louis Bossart 提交于
ALSA did not provide any direct means to infer the audio time for A/V sync and system/audio time correlations (eg. PulseAudio). Applications had to track the number of samples read/written and add/subtract the number of samples queued in the ring buffer. This accounting led to small errors, typically several samples, due to the two-step process. Computing the audio time in the kernel is more direct, as all the information is available in the same routines. Also add new .audio_wallclock routine to enable fine-grain synchronization between monotonic system time and audio hardware time. Using the wallclock, if supported in hardware, allows for a much better sub-microsecond precision and a common drift tracking for all devices sharing the same wall clock (master clock). Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 10月, 2012 1 次提交
-
-
由 David Howells 提交于
Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-
- 13 9月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
For following the standard, define more channel map positions and shuffle the items a bit: - As both PulseAudio and gstreamer define MONO channel position explicitly, we should follow that, too. The mono streams point to this channel position unless they are explicitly assigned to certain channel positions. - Top-front-* and Top-rear-* positions are added, carried from PulseAudio's definitions. - Move NA and MONO definitions at the top of table right after UNKNOWN, since these are more abstract in comparison with other practical positions. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 9月, 2012 2 次提交
-
-
由 Takashi Iwai 提交于
There is already a set of channel position definitions in alsa-lib mixer.h, and it'd be more practical to keep the same order for the PCM channel map, too. The value is shifted with 1 to keep zero for UNKNOWN. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This patch implements the basic data types for the standard channel mapping API handling. - The definitions of the channel positions and the new TLV types are added in sound/asound.h and sound/tlv.h, so that they can be referred from user-space. - Introduced a new helper function snd_pcm_add_chmap_ctls() to create control elements representing the channel maps for each PCM (sub)stream. - Some standard pre-defined channel maps are provided for convenience. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 4月, 2012 1 次提交
-
-
由 Ricardo Neri 提交于
Along with the IEC-60958 channel status word, CEA-861 Audio InfoFrames are used in HDMI and DisplayPort to describe the parameters of the audio stream. Hence, drivers for such devices may use these definitions to, for instance, fill a CEA-861 data structure and pass it to a display driver to configure an IP. Signed-off-by: NRicardo Neri <ricardo.neri@ti.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 10月, 2011 1 次提交
-
-
由 Clemens Ladisch 提交于
Handling of user control elements was implemented for all types except ENUMERATED. This type will be needed for the device-specific mixers of upcoming FireWire drivers. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 11月, 2010 1 次提交
-
-
由 Clemens Ladisch 提交于
This patch allows to disable period interrupts which are not needed when the application relies on a system timer to wake-up and refill the ring buffer. The behavior of the driver is left unchanged, and interrupts are only disabled if the application requests this configuration. The behavior in case of underruns is slightly different, instead of being detected during the period interrupts the underruns are detected when the application calls snd_pcm_update_avail, which in turns forces a refresh of the hw pointer and shows the buffer is empty. More specifically this patch makes a lot of sense when PulseAudio relies on timer-based scheduling to access audio devices such as HDAudio or Intel SST. Disabling interrupts removes two unwanted wake-ups due to period elapsed events in low-power playback modes. It also simplifies PulseAudio voice modules used for speech calls. To quote Lennart "This patch looks very interesting and desirable. This is something have long been waiting for." Support for this in hardware drivers is optional. Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@intel.com> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 5月, 2010 1 次提交
-
-
由 Ben Collins 提交于
This defines the 24bps and 40bps (8khz sample rate) G.723 codec formats. They are going to be used once I submit the driver for an mpeg4/g723 compression card. I've updated the signed value to -1 as per Takashi's comments since these are non-linear formats. Signed-off-by: NBen Collins <bcollins@bluecherry.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 5月, 2010 1 次提交
-
-
由 Daniel Mack 提交于
This fixes some whitespace/indentation flaws I stumbled over. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 3月, 2010 1 次提交
-
-
由 Jaroslav Kysela 提交于
Do not use hardcoded SNDRV_TIMER_EVENT_START value. Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 8月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Increase the PCM protocol version to indicate the drain ioctl behavior change. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 5月, 2009 1 次提交
-
-
由 Jaroslav Kysela 提交于
Move the fifo_size assignment to hw->ioctl callback to allow lowlevel drivers overwrite the default behaviour. fifo_size is in frames not bytes as specified in asound.h and alsa-lib's documentation, but most hardware have fixed byte based FIFOs. Introduce internal SNDRV_PCM_INFO_FIFO_IN_FRAMES. Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 3月, 2009 2 次提交
-
-
由 Arnd Bergmann 提交于
This takes care of all files that have only a small number of non-strict integer type uses. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Cc: linux-ppp@vger.kernel.org Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnd Bergmann 提交于
A number of standard posix types are used in exported headers, which is not allowed if __STRICT_KERNEL_NAMES is defined. In order to get rid of the non-__STRICT_KERNEL_NAMES part and to make sane headers the default, we have to change them all to safe types. There are also still some leftovers in reiserfs_fs.h, elfcore.h and coda.h, but these files have not compiled in user space for a long time. This leaves out the various integer types ({u_,u,}int{8,16,32,64}_t), which we take care of separately. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Cc: linux-ppp@vger.kernel.org Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 3月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
Use define instead of enum for ioctl definitions since strace can't parse ioctls defined via enum properly. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Removed obsleted snd_xferv struct and ioctls that are no longer used in the current codebase. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 10月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Added the hrtimer backend for ALSA timer interface. It can be used for the sequencer timer source. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 10月, 2008 2 次提交
-
-
由 Takashi Iwai 提交于
Increase the card components[] (and thus snd_card_info.components[], too) array size from 80 to 128 chars so that more strings can be stored. The 80 chars aren't enough for more than 2 HD-audio codecs, and this hits an ugly snd_BUG() as reported by Wu Fegguang for HP 2230s. The control protocol number is increased to 2.0.6 as well, in case it matters. Reported-by: NWu Fengguang <wfg@linux.intel.com> Acked-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
We have some arithmetic operations against snd_pcm_hw_param_t, thus bitwise isn't correct for it. Better to remove the flag to shut up sparse warnings. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 01 8月, 2008 1 次提交
-
-
由 Karsten Wiese 提交于
Added a new US122L usb-audio driver. This driver works together with a dedicated alsa-lib plugin. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 26 6月, 2008 1 次提交
-
-
由 Jaroslav Kysela 提交于
This reverts commit 36b34d2437104f323e09d7c6af6451d3c0b9c0cd. From: Al Viro <viro@ZenIV.linux.org.uk> WIW, *all* this stuff is not bitwise at all. For crying out loud, half of these types are routinely used as array indices and loop variables... If anything, we want a different set of allowed operations - subtraction between elements of type (yielding integer), addition/subtraction of integer types not bigger than ours (yielding our type), comparisons, assignments (=, +=, -=, passing to function as argument, return from function, initializers) and second/third arguments in ?:. With 0 *not* being allowed as a constant of such type. It's not bitwise; we may use the same infrastructure in sparse, but it should be a separate class of types (__attribute__((affine))). dma_addr_t is another candidate for the same treatment, but there we'll need helpers for conversions to hw-acceptable form (dma_to_le32(), etc.) and gradual conversion of drivers. ALSA ones and pm mess are absolutely straightforward cases, though. Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 19 6月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
Fully half of all alsa sparse warnings are from snd_pcm_hw_param_t degrading to integer type, this goes a long way towards eliminating them. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 01 2月, 2008 6 次提交
-
-
由 Jaroslav Kysela 提交于
Change semantics for SNDRV_PCM_TSTAMP_MMAP. Doing timestamping only in the interrupt handler might cause that hw_ptr is not related to actual timestamp. With this change, grab timestamp at every hw_ptr update to have always valid timestamp + ring buffer position pair. With this change, SNDRV_PCM_TSTAMP_MMAP was renamed to SNDRV_PCM_TSTAMP_ENABLE. It's no regression (I think). Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
The xfer_align sw_params parameter has never been used in a sane manner, and no one understands what this does exactly. The current implementation looks also buggy because it allows write of shorter size than xfer_align. So, if you do partial writes, the write isn't actually aligned at all. Removing this parameter will make some pcm_lib_* code more readable (and less buggy). Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
This patch removes the indirect control access to the control elements. The indirect access has never been used and is even broken on 32bit ioctl wrapper. Let's clean it up. The pointers still remain in snd_ctl_elem_* structs just to make sure that the struct size won't change. Once after checking the size consistency, we can get rid of them, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jaroslav Kysela 提交于
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jaroslav Kysela 提交于
We need an accurate and continuous (monotonic) time sources to do accurate synchronization among more timing sources. This patch allows to enable monotonic timestamps for ALSA PCM devices and enables monotonic timestamps for ALSA timer devices. Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Updated the forgotten SNDRV_HWDEP_IFACE_LAST to point the really last member. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 16 10月, 2007 2 次提交
-
-
由 Jaroslav Kysela 提交于
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Added a hwdep interface for each codec (enabled per kconfig). This interface can be used for reading/writing HD-audio verbs and other purposes as future extensions. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 23 9月, 2006 2 次提交
-
-
由 Jaroslav Kysela 提交于
- added callback option - added READ/WRITE/COMMAND flags to access member - added WRITE/COMMAND ioctls - added SNDRV_CTL_EVENT_MASK_TLV for TLV change notifications - added TLV support to ELEM_ADD ioctl Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Jaroslav Kysela 提交于
This patch implements a TLV mechanism to transfer an additional information like dB scale to the user space. The types might be extended in future. Acked-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 23 6月, 2006 1 次提交
-
-
由 Takashi Iwai 提交于
Added O_APPEND flag support to PCM to enable shared substreams among multiple processes. This mechanism is used by dmix and dsnoop plugins. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 1月, 2006 2 次提交
-
-
由 Takashi Iwai 提交于
Modules: ALSA Core Remove xxx_t typedefs from the core component. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ALSA sequencer,ALSA Core Clean up includes in asound.h and asequencer.h. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 8月, 2005 1 次提交
-
-
由 Jaroslav Kysela 提交于
ALSA Core Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-