1. 09 10月, 2008 5 次提交
    • A
      Wrapper for lower-level revalidate_disk routines. · 0c002c2f
      Andrew Patterson 提交于
      This is a wrapper for the lower-level revalidate_disk call-backs such
      as sd_revalidate_disk(). It allows us to perform pre and post
      operations when calling them.
      
      We will use this wrapper in a later patch to adjust block device sizes
      after an online resize (a _post_ operation).
      Signed-off-by: NAndrew Patterson <andrew.patterson@hp.com>
      Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      0c002c2f
    • T
      block: adjust formatting for large minors and add ext_range sysfs attr · 1f014290
      Tejun Heo 提交于
      With extended minors and the soon-to-follow debug feature, large minor
      numbers for block devices will be common.  This patch does the
      followings to make printouts pretty.
      
      * Adapt print formats such that large minors don't break the
        formatting.
      
      * For extended MAJ:MIN, %02x%02x for MAJ:MIN used in
        printk_all_partitions() doesn't cut it anymore.  Update it such that
        %03x:%05x is used if either MAJ or MIN doesn't fit in %02x.
      
      * Implement ext_range sysfs attribute which shows total minors the
        device can use including both conventional minor space and the
        extended one.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      1f014290
    • D
      Allow elevators to sort/merge discard requests · e17fc0a1
      David Woodhouse 提交于
      But blkdev_issue_discard() still emits requests which are interpreted as
      soft barriers, because naïve callers might otherwise issue subsequent
      writes to those same sectors, which might cross on the queue (if they're
      reallocated quickly enough).
      
      Callers still _can_ issue non-barrier discard requests, but they have to
      take care of queue ordering for themselves.
      Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      e17fc0a1
    • D
      Add BLKDISCARD ioctl to allow userspace to discard sectors · d30a2605
      David Woodhouse 提交于
      We may well want mkfs tools to use this to mark the whole device as
      unwanted before they format it, for example.
      
      The ioctl takes a pair of uint64_ts, which are start offset and length
      in _bytes_. Although at the moment it might make sense for them both to
      be in 512-byte sectors, I don't want to limit the ABI to that.
      Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      d30a2605
    • D
      Add 'discard' request handling · fb2dce86
      David Woodhouse 提交于
      Some block devices benefit from a hint that they can forget the contents
      of certain sectors. Add basic support for this to the block core, along
      with a 'blkdev_issue_discard()' helper function which issues such
      requests.
      
      The caller doesn't get to provide an end_io functio, since
      blkdev_issue_discard() will automatically split the request up into
      multiple bios if appropriate. Neither does the function wait for
      completion -- it's expected that callers won't care about when, or even
      _if_, the request completes. It's only a hint to the device anyway. By
      definition, the file system doesn't _care_ about these sectors any more.
      
      [With feedback from OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> and
      Jens Axboe <jens.axboe@oracle.com]
      Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      fb2dce86
  2. 29 7月, 2008 1 次提交
    • H
      vfs: pagecache usage optimization for pagesize!=blocksize · 8ab22b9a
      Hisashi Hifumi 提交于
      When we read some part of a file through pagecache, if there is a
      pagecache of corresponding index but this page is not uptodate, read IO
      is issued and this page will be uptodate.
      
      I think this is good for pagesize == blocksize environment but there is
      room for improvement on pagesize != blocksize environment.  Because in
      this case a page can have multiple buffers and even if a page is not
      uptodate, some buffers can be uptodate.
      
      So I suggest that when all buffers which correspond to a part of a file
      that we want to read are uptodate, use this pagecache and copy data from
      this pagecache to user buffer even if a page is not uptodate.  This can
      reduce read IO and improve system throughput.
      
      I wrote a benchmark program and got result number with this program.
      
      This benchmark do:
      
        1: mount and open a test file.
      
        2: create a 512MB file.
      
        3: close a file and umount.
      
        4: mount and again open a test file.
      
        5: pwrite randomly 300000 times on a test file.  offset is aligned
           by IO size(1024bytes).
      
        6: measure time of preading randomly 100000 times on a test file.
      
      The result was:
      	2.6.26
              330 sec
      
      	2.6.26-patched
              226 sec
      
      Arch:i386
      Filesystem:ext3
      Blocksize:1024 bytes
      Memory: 1GB
      
      On ext3/4, a file is written through buffer/block.  So random read/write
      mixed workloads or random read after random write workloads are optimized
      with this patch under pagesize != blocksize environment.  This test result
      showed this.
      
      The benchmark program is as follows:
      
      #include <stdio.h>
      #include <sys/types.h>
      #include <sys/stat.h>
      #include <fcntl.h>
      #include <unistd.h>
      #include <time.h>
      #include <stdlib.h>
      #include <string.h>
      #include <sys/mount.h>
      
      #define LEN 1024
      #define LOOP 1024*512 /* 512MB */
      
      main(void)
      {
      	unsigned long i, offset, filesize;
      	int fd;
      	char buf[LEN];
      	time_t t1, t2;
      
      	if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
      		perror("cannot mount\n");
      		exit(1);
      	}
      	memset(buf, 0, LEN);
      	fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC);
      	if (fd < 0) {
      		perror("cannot open file\n");
      		exit(1);
      	}
      	for (i = 0; i < LOOP; i++)
      		write(fd, buf, LEN);
      	close(fd);
      	if (umount("/root/test1/") < 0) {
      		perror("cannot umount\n");
      		exit(1);
      	}
      	if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
      		perror("cannot mount\n");
      		exit(1);
      	}
      	fd = open("/root/test1/testfile", O_RDWR);
      	if (fd < 0) {
      		perror("cannot open file\n");
      		exit(1);
      	}
      
      	filesize = LEN * LOOP;
      	for (i = 0; i < 300000; i++){
      		offset = (random() % filesize) & (~(LEN - 1));
      		pwrite(fd, buf, LEN, offset);
      	}
      	printf("start test\n");
      	time(&t1);
      	for (i = 0; i < 100000; i++){
      		offset = (random() % filesize) & (~(LEN - 1));
      		pread(fd, buf, LEN, offset);
      	}
      	time(&t2);
      	printf("%ld sec\n", t2-t1);
      	close(fd);
      	if (umount("/root/test1/") < 0) {
      		perror("cannot umount\n");
      		exit(1);
      	}
      }
      Signed-off-by: NHisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
      Cc: Nick Piggin <nickpiggin@yahoo.com.au>
      Cc: Christoph Hellwig <hch@infradead.org>
      Cc: Jan Kara <jack@ucw.cz>
      Cc: <linux-ext4@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8ab22b9a
  3. 27 7月, 2008 10 次提交
  4. 26 7月, 2008 1 次提交
    • M
      locks: add special return value for asynchronous locks · bde74e4b
      Miklos Szeredi 提交于
      Use a special error value FILE_LOCK_DEFERRED to mean that a locking
      operation returned asynchronously.  This is returned by
      
        posix_lock_file() for sleeping locks to mean that the lock has been
        queued on the block list, and will be woken up when it might become
        available and needs to be retried (either fl_lmops->fl_notify() is
        called or fl_wait is woken up).
      
        f_op->lock() to mean either the above, or that the filesystem will
        call back with fl_lmops->fl_grant() when the result of the locking
        operation is known.  The filesystem can do this for sleeping as well
        as non-sleeping locks.
      
      This is to make sure, that return values of -EAGAIN and -EINPROGRESS by
      filesystems are not mistaken to mean an asynchronous locking.
      
      This also makes error handling in fs/locks.c and lockd/svclock.c slightly
      cleaner.
      Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
      Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
      Cc: "J. Bruce Fields" <bfields@fieldses.org>
      Cc: Matthew Wilcox <matthew@wil.cx>
      Cc: David Teigland <teigland@redhat.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bde74e4b
  5. 25 7月, 2008 4 次提交
    • U
      flag parameters: NONBLOCK in pipe · be61a86d
      Ulrich Drepper 提交于
      This patch adds O_NONBLOCK support to pipe2.  It is minimally more involved
      than the patches for eventfd et.al but still trivial.  The interfaces of the
      create_write_pipe and create_read_pipe helper functions were changed and the
      one other caller as well.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_pipe2
      # ifdef __x86_64__
      #  define __NR_pipe2 293
      # elif defined __i386__
      #  define __NR_pipe2 331
      # else
      #  error "need __NR_pipe2"
      # endif
      #endif
      
      int
      main (void)
      {
        int fds[2];
        if (syscall (__NR_pipe2, fds, 0) == -1)
          {
            puts ("pipe2(0) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            int fl = fcntl (fds[i], F_GETFL);
            if (fl == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if (fl & O_NONBLOCK)
              {
                printf ("pipe2(0) set non-blocking mode for fds[%d]\n", i);
                return 1;
              }
            close (fds[i]);
          }
      
        if (syscall (__NR_pipe2, fds, O_NONBLOCK) == -1)
          {
            puts ("pipe2(O_NONBLOCK) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            int fl = fcntl (fds[i], F_GETFL);
            if (fl == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if ((fl & O_NONBLOCK) == 0)
              {
                printf ("pipe2(O_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i);
                return 1;
              }
            close (fds[i]);
          }
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: NUlrich Drepper <drepper@redhat.com>
      Acked-by: NDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      be61a86d
    • U
      flag parameters: pipe · ed8cae8b
      Ulrich Drepper 提交于
      This patch introduces the new syscall pipe2 which is like pipe but it also
      takes an additional parameter which takes a flag value.  This patch implements
      the handling of O_CLOEXEC for the flag.  I did not add support for the new
      syscall for the architectures which have a special sys_pipe implementation.  I
      think the maintainers of those archs have the chance to go with the unified
      implementation but that's up to them.
      
      The implementation introduces do_pipe_flags.  I did that instead of changing
      all callers of do_pipe because some of the callers are written in assembler.
      I would probably screw up changing the assembly code.  To avoid breaking code
      do_pipe is now a small wrapper around do_pipe_flags.  Once all callers are
      changed over to do_pipe_flags the old do_pipe function can be removed.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_pipe2
      # ifdef __x86_64__
      #  define __NR_pipe2 293
      # elif defined __i386__
      #  define __NR_pipe2 331
      # else
      #  error "need __NR_pipe2"
      # endif
      #endif
      
      int
      main (void)
      {
        int fd[2];
        if (syscall (__NR_pipe2, fd, 0) != 0)
          {
            puts ("pipe2(0) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            int coe = fcntl (fd[i], F_GETFD);
            if (coe == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if (coe & FD_CLOEXEC)
              {
                printf ("pipe2(0) set close-on-exit for fd[%d]\n", i);
                return 1;
              }
          }
        close (fd[0]);
        close (fd[1]);
      
        if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0)
          {
            puts ("pipe2(O_CLOEXEC) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            int coe = fcntl (fd[i], F_GETFD);
            if (coe == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if ((coe & FD_CLOEXEC) == 0)
              {
                printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i);
                return 1;
              }
          }
        close (fd[0]);
        close (fd[1]);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: NUlrich Drepper <drepper@redhat.com>
      Acked-by: NDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ed8cae8b
    • K
      fix soft lock up at NFS mount via per-SB LRU-list of unused dentries · da3bbdd4
      Kentaro Makita 提交于
      [Summary]
      
       Split LRU-list of unused dentries to one per superblock to avoid soft
       lock up during NFS mounts and remounting of any filesystem.
      
       Previously I posted here:
       http://lkml.org/lkml/2008/3/5/590
      
      [Descriptions]
      
      - background
      
        dentry_unused is a list of dentries which are not referenced.
        dentry_unused grows up when references on directories or files are
        released.  This list can be very long if there is huge free memory.
      
      - the problem
      
        When shrink_dcache_sb() is called, it scans all dentry_unused linearly
        under spin_lock(), and if dentry->d_sb is differnt from given
        superblock, scan next dentry.  This scan costs very much if there are
        many entries, and very ineffective if there are many superblocks.
      
        IOW, When we need to shrink unused dentries on one dentry, but scans
        unused dentries on all superblocks in the system.  For example, we scan
        500 dentries to unmount a filesystem, but scans 1,000,000 or more unused
        dentries on other superblocks.
      
        In our case , At mounting NFS*, shrink_dcache_sb() is called to shrink
        unused dentries on NFS, but scans 100,000,000 unused dentries on
        superblocks in the system such as local ext3 filesystems.  I hear NFS
        mounting took 1 min on some system in use.
      
      * : NFS uses virtual filesystem in rpc layer, so NFS is affected by
        this problem.
      
        100,000,000 is possible number on large systems.
      
        Per-superblock LRU of unused dentried can reduce the cost in
        reasonable manner.
      
      - How to fix
      
        I found this problem is solved by David Chinner's "Per-superblock
        unused dentry LRU lists V3"(1), so I rebase it and add some fix to
        reclaim with fairness, which is in Andrew Morton's comments(2).
      
        1) http://lkml.org/lkml/2006/5/25/318
        2) http://lkml.org/lkml/2006/5/25/320
      
        Split LRU-list of unused dentries to each superblocks.  Then, NFS
        mounting will check dentries under a superblock instead of all.  But
        this spliting will break LRU of dentry-unused.  So, I've attempted to
        make reclaim unused dentrins with fairness by calculate number of
        dentries to scan on this sb based on following way
      
        number of dentries to scan on this sb =
        count * (number of dentries on this sb / number of dentries in the machine)
      
      - ToDo
       - I have to measuring performance number and do stress tests.
      
       - When unmount occurs during prune_dcache(), scanning on same
        superblock, It is unable to reach next superblock because it is gone
        away.  We restart scannig superblock from first one, it causes
        unfairness of reclaim unused dentries on first superblock.  But I think
        this happens very rarely.
      
      - Test Results
      
        Result on 6GB boxes with excessive unused dentries.
      
      Without patch:
      
      $ cat /proc/sys/fs/dentry-state
      10181835        10180203        45      0       0       0
      # mount -t nfs 10.124.60.70:/work/kernel-src nfs
      real    0m1.830s
      user    0m0.001s
      sys     0m1.653s
      
       With this patch:
      $ cat /proc/sys/fs/dentry-state
      10236610        10234751        45      0       0       0
      # mount -t nfs 10.124.60.70:/work/kernel-src nfs
      real    0m0.106s
      user    0m0.002s
      sys     0m0.032s
      
      [akpm@linux-foundation.org: fix comments]
      Signed-off-by: NKentaro Makita <k-makita@np.css.fujitsu.com>
      Cc: Neil Brown <neilb@suse.de>
      Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
      Cc: David Chinner <dgc@sgi.com>
      Cc: "J. Bruce Fields" <bfields@fieldses.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      da3bbdd4
    • A
      move memory_read_from_buffer() from fs.h to string.h · e108526e
      Akinobu Mita 提交于
      James Bottomley warns that inclusion of linux/fs.h in a low level
      driver was always a danger signal.  This patch moves
      memory_read_from_buffer() from fs.h to string.h and fixes includes in
      existing memory_read_from_buffer() users.
      Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
      Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Zhang Rui <rui.zhang@intel.com>
      Cc: Bob Moore <robert.moore@intel.com>
      Cc: Thomas Renninger <trenn@suse.de>
      Cc: Len Brown <lenb@kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e108526e
  6. 15 7月, 2008 1 次提交
  7. 14 7月, 2008 1 次提交
  8. 12 7月, 2008 1 次提交
  9. 03 7月, 2008 1 次提交
    • A
      Remove BKL from remote_llseek v2 · 9465efc9
      Andi Kleen 提交于
      - Replace remote_llseek with generic_file_llseek_unlocked (to force compilation
      failures in all users)
      - Change all users to either use generic_file_llseek_unlocked directly or
      take the BKL around. I changed the file systems who don't use the BKL
      for anything (CIFS, GFS) to call it directly. NCPFS and SMBFS and NFS
      take the BKL, but explicitely in their own source now.
      
      I moved them all over in a single patch to avoid unbisectable sections.
      
      Open problem: 32bit kernels can corrupt fpos because its modification
      is not atomic, but they can do that anyways because there's other paths who
      modify it without BKL.
      
      Do we need a special lock for the pos/f_version = 0 checks?
      
      Trond says the NFS BKL is likely not needed, but keep it for now
      until his full audit.
      
      v2: Use generic_file_llseek_unlocked instead of remote_llseek_unlocked
          and factor duplicated code (suggested by hch)
      
      Cc: Trond.Myklebust@netapp.com
      Cc: swhiteho@redhat.com
      Cc: sfrench@samba.org
      Cc: vandrove@vc.cvut.cz
      Signed-off-by: NAndi Kleen <ak@suse.de>
      Signed-off-by: NAndi Kleen <ak@linux.intel.com>
      Signed-off-by: NJonathan Corbet <corbet@lwn.net>
      9465efc9
  10. 01 7月, 2008 1 次提交
    • J
      Properly notify block layer of sync writes · 18ce3751
      Jens Axboe 提交于
      fsync_buffers_list() and sync_dirty_buffer() both issue async writes and
      then immediately wait on them. Conceptually, that makes them sync writes
      and we should treat them as such so that the IO schedulers can handle
      them appropriately.
      
      This patch fixes a write starvation issue that Lin Ming reported, where
      xx is stuck for more than 2 minutes because of a large number of
      synchronous IO in the system:
      
      INFO: task kjournald:20558 blocked for more than 120 seconds.
      "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
      message.
      kjournald     D ffff810010820978  6712 20558      2
      ffff81022ddb1d10 0000000000000046 ffff81022e7baa10 ffffffff803ba6f2
      ffff81022ecd0000 ffff8101e6dc9160 ffff81022ecd0348 000000008048b6cb
      0000000000000086 ffff81022c4e8d30 0000000000000000 ffffffff80247537
      Call Trace:
      [<ffffffff803ba6f2>] kobject_get+0x12/0x17
      [<ffffffff80247537>] getnstimeofday+0x2f/0x83
      [<ffffffff8029c1ac>] sync_buffer+0x0/0x3f
      [<ffffffff8066d195>] io_schedule+0x5d/0x9f
      [<ffffffff8029c1e7>] sync_buffer+0x3b/0x3f
      [<ffffffff8066d3f0>] __wait_on_bit+0x40/0x6f
      [<ffffffff8029c1ac>] sync_buffer+0x0/0x3f
      [<ffffffff8066d48b>] out_of_line_wait_on_bit+0x6c/0x78
      [<ffffffff80243909>] wake_bit_function+0x0/0x23
      [<ffffffff8029e3ad>] sync_dirty_buffer+0x98/0xcb
      [<ffffffff8030056b>] journal_commit_transaction+0x97d/0xcb6
      [<ffffffff8023a676>] lock_timer_base+0x26/0x4b
      [<ffffffff8030300a>] kjournald+0xc1/0x1fb
      [<ffffffff802438db>] autoremove_wake_function+0x0/0x2e
      [<ffffffff80302f49>] kjournald+0x0/0x1fb
      [<ffffffff802437bb>] kthread+0x47/0x74
      [<ffffffff8022de51>] schedule_tail+0x28/0x5d
      [<ffffffff8020cac8>] child_rip+0xa/0x12
      [<ffffffff80243774>] kthread+0x0/0x74
      [<ffffffff8020cabe>] child_rip+0x0/0x12
      
      Lin Ming confirms that this patch fixes the issue. I've run tests with
      it for the past week and no ill effects have been observed, so I'm
      proposing it for inclusion into 2.6.26.
      Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      18ce3751
  11. 23 6月, 2008 1 次提交
  12. 07 6月, 2008 1 次提交
    • A
      introduce memory_read_from_buffer() · 93b07113
      Akinobu Mita 提交于
      This patch introduces memory_read_from_buffer().
      
      The only difference between memory_read_from_buffer() and
      simple_read_from_buffer() is which address space the function copies to.
      
      simple_read_from_buffer copies to user space memory.
      memory_read_from_buffer copies to normal memory.
      Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Doug Warzecha <Douglas_Warzecha@dell.com>
      Cc: Zhang Rui <rui.zhang@intel.com>
      Cc: Matt Domsch <Matt_Domsch@dell.com>
      Cc: Abhay Salunke <Abhay_Salunke@dell.com>
      Cc: Greg Kroah-Hartman <gregkh@suse.de>
      Cc: Markus Rechberger <markus.rechberger@amd.com>
      Cc: Kay Sievers <kay.sievers@vrfy.org>
      Cc: Bob Moore <robert.moore@intel.com>
      Cc: Thomas Renninger <trenn@suse.de>
      Cc: Len Brown <lenb@kernel.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: "Antonino A. Daplas" <adaplas@pol.net>
      Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
      Cc: Michael Holzheu <holzheu@de.ibm.com>
      Cc: Brian King <brking@us.ibm.com>
      Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
      Cc: Andrew Vasquez <linux-driver@qlogic.com>
      Cc: Seokmann Ju <seokmann.ju@qlogic.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      93b07113
  13. 07 5月, 2008 2 次提交
  14. 29 4月, 2008 2 次提交
  15. 28 4月, 2008 2 次提交
  16. 26 4月, 2008 1 次提交
    • J
      locks: don't call ->copy_lock methods on return of conflicting locks · 1a747ee0
      J. Bruce Fields 提交于
      The file_lock structure is used both as a heavy-weight representation of
      an active lock, with pointers to reference-counted structures, etc., and
      as a simple container for parameters that describe a file lock.
      
      The conflicting lock returned from __posix_lock_file is an example of
      the latter; so don't call the filesystem or lock manager callbacks when
      copying to it.  This also saves the need for an unnecessary
      locks_init_lock in the nfsv4 server.
      
      Thanks to Trond for pointing out the error.
      Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
      Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
      1a747ee0
  17. 25 4月, 2008 2 次提交
  18. 22 4月, 2008 1 次提交
  19. 19 4月, 2008 2 次提交