DMA control IPC structure wrong config array length,
So corrected the size
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

While converting to new core hda capability parsing, one instance of
check had inverted logic which was converted wrongly.

Fixes: ec8ae570 (ALSA: convert users to core bus_parse_capabilities)
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For some platforms manifest data may not be defined, thus the private
data would not be defined as well.

So check the size of private data and proceed only if it is valid.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Topology manifest has lib names and lib count info. So,
define tokens to represent module private data and parse
these tokens to fill up the manifest structure in the driver
accordingly.
Signed-off-by: NShreyas NC <shreyas.nc@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The skl_dfw_config structure is no longer required as the module
config is populated by parsing and reading the token values.

So, remove the structure.
Signed-off-by: NShreyas NC <shreyas.nc@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Skl topology data is preceded by a descriptor for number of data
blocks, the size of the data block and type of data block. The
type of the data block can be either a tuple or a binary blob.

Private data is parsed based on data block type and module data
is filled accordingly.
Signed-off-by: NShreyas NC <shreyas.nc@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

With recent topology changes in alsa-lib, driver data for
modules can now be passed in topology conf file using tuples.

This patch defines vendor specific tokens to describe private
data with tuples.

The allowed token types are UUID, string, bool, byte, short and
word. These tokens will be referenced by the vendor tuples in
the conf file.

In the topology conf file, multiple data blocks can be defined
for a widget which can be either tuple vendor array or blob. So,
each data block will be preceded by a descriptor to identify
size and type of block. These descriptors will be token
value pairs.

Tokens for module_id and loadable flag are not defined as these
are read from the DSP FW manifest.
Signed-off-by: NShreyas NC <shreyas.nc@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

trivial fix to spelling mistake in dev_err message and reformat code
to avoid being over 80 chars wide per line
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Baytrail-CR platform needing SSP0-AIF1 routing
Also fix SSP0 while we are at it.
Suggested-by: NAndrei Lavreniyuk <andy.lavr@gmail.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

spurious __initconst copy/pasted from other drivers
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

use dev_info to provide better support for autodetection
and DMI-based quirks, no functional changes
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add DMI-based quirk, routing from SSP0 to AIF1 is not very
usual
Suggested-by: NAntonio Ospite <ao2@ao2.it>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

I2S MCLK has been routed to LSE connector on the MinnowBoard
starting with HW version 3. Older versions of the board do
not have MCLK wired.

Add dmi quirk to disable MCLK for MinnowBoard MAX (v2).
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Use platform clocks "pmc_plt_clk_3" when MCLK quirk is defined.
By default always enable the 19.2 MHz PLL.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some platforms have the analog mic connected to IN3,
add route accordingly
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Auto routing based on Baytrail/Baytrail-CR detection
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

SSP0 uses 16 bits 2ch, SSP2 24 bits 2ch
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Allow for all possible combinations of SSP0,SSP2, AIF1, AIF2
combination (only one at a time)
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add quirk to model routing on Baytrail-CR devices
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Existing code used SSP2, make selection of SSP id
dependent on port name. This is required when the
machine driver uses non-default settings
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The Atom DPCM driver only allowed for the SSP2 interface, add
definitions for modem/SSP0.

These definitions might be used to route audio to a codec
connected to SSP0 (instead of a modem in traditional usages),
but there is a restriction to 2ch I2S. SSP2 is capable of
handling up to 4 slot TDM.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

BYT-CR needs special handling to deal with BIOS issues.
For some reason the IPC interrupt index is also modified from
the Baytrail-T reference.

Use PUNIT BIOS config bits to infer platform details.
Assume regular Baytrail configs if status is incorrect or
CONFIG_IOSF_MBI is not enabled.

SSP0 routing issues are solved without dedicated firmware
in following patches

Tested on Asus T100TA and T100TAF.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some Baytrail-CR devices rely on analog mics connected with
differential pairs and not the single-ended default
Add quirk and enable it for T00TAF
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some Baytrail devices only have a mono speaker, add quirk and enable
it for T100TAF.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add quirk based on DMI string matching
Also fix matching to use DMI_EXACT_MATCH otherwise T100TA and T100TAF
will be using same quirk
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Merge branch 'topic/rt5640' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel

Adding missing definitions and flags to select internal
clock source as system clock, needed for jack detection.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Now that we have balanced loading of the topology file and split of init
and fw_init and fill module data during asoc probe.

So remove it from runtime, but keep error check in case things fall apart.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Once topology and firmware are loaded, we can parse the manifest. Use driver
pipe and widget list to get list of all modules and populate the data.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

snd_skl_get_module_info() takes skl_dfw_module as an argument. The users
then updates the topology data, so instead pass skl_module_cfg and let
snd_skl_get_module_info() fill that up.
Signed-off-by: NDharageswari R <dharageswari.r@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Merge branch 'topic/hda-link-time' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-intel

The HDA controller from SKL onwards support additional timestamp
reporting of the link time. The link time is read from HW
registers and converted to audio values.
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NHardik T Shah <hardik.t.shah@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Skylake onwards HDA controller supports new capabilities like
Global Time Stamping (GTS) capability. So add support to parse
these new capabilities.
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NHardik T Shah <hardik.t.shah@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove the unused one as we have moved it up to hdac core.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now that we have the bus parse capabilities moved to core, we need to
convert users.

The SKL driver and HDA extended lib needs to converted in single patch,
otherwise we regress on the functionality.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA capability introduced recently are move to hdac core so that it can
be used by legacy driver as well. Also move the capability pointers up
to hdac_bus object.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A module can be scheduled in deferent processing domains in DSP. Topology
specifies the module domain.
Signed-off-by: NSenthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

While changing code notice bad comment style, so fix it up.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The library load is added as one of the ops in skl_dsp_fw_ops().

The manifest load gives the files to be loaded which are loaded during
the fw_init()
Signed-off-by: NRamesh Babu <ramesh.babu@intel.com>
Signed-off-by: NKranthi G <gudishax.kranthikumar@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

sound/soc/intel/skylake/skl-topology.c:480:24-30: ERROR: application of sizeof to pointer

 sizeof when applied to a pointer typed expression gives the size of
 the pointer

Generated by: scripts/coccinelle/misc/noderef.cocci
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>