The useful macros embed message level in the name. Thus, it cleans up the code
a bit. In cases when it was plain printk() the conversion was done to info
level.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSteve French <steve.french@primarydata.com>

This is a bigger patch, but its size is mostly due to
a single change for how we check for remapping illegal characters
in file names - a lot of repeated, small changes to
the way callers request converting file names.

The final patch in the series does the following:

1) changes default behavior for cifs to be more intuitive.
Currently we do not map by default to seven reserved characters,
ie those valid in POSIX but not in NTFS/CIFS/SMB3/Windows,
unless a mount option (mapchars) is specified.  Change this
to by default always map and map using the SFM maping
(like the Mac uses) unless the server negotiates the CIFS Unix
Extensions (like Samba does when mounting with the cifs protocol)
when the remapping of the characters is unnecessary.  This should
help SMB3 mounts in particular since Samba will likely be
able to implement this mapping with its new "vfs_fruit" module
as it will be doing for the Mac.
2) if the user specifies the existing "mapchars" mount option then
use the "SFU" (Microsoft Services for Unix, SUA) style mapping of
the seven characters instead.
3) if the user specifies "nomapposix" then disable SFM/MAC style mapping
(so no character remapping would be used unless the user specifies
"mapchars" on mount as well, as above).
4) change all the places in the code that check for the superblock
flag on the mount which is set by mapchars and passed in on all
path based operation and change it to use a small function call
instead to set the mapping type properly (and check for the
mapping type in the cifs unicode functions)
Signed-off-by: NSteve French <smfrench@gmail.com>

The "sfu" mount option did not work on SMB2/SMB3 mounts.
With these changes when the "sfu" mount option is passed in
on an smb2/smb2.1/smb3 mount the client can emulate (and
recognize) fifo and device (character and device files).

In addition the "sfu" mount option should not conflict
with "mfsymlinks" (symlink emulation) as we will never
create "sfu" style symlinks, but using "sfu" mount option
will allow us to recognize existing symlinks, created with
Microsoft "Services for Unix" (SFU and SUA).

To enable the "sfu" mount option for SMB2/SMB3 the calling
syntax of the generic cifs/smb2/smb3 sync_read and sync_write
protocol dependent function needed to be changed (we
don't have a file struct in all cases), but this actually
ended up simplifying the code a little.
Signed-off-by: NSteve French <smfrench@gmail.com>

The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp.  The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.

To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 52a36244.

Causes rmmod to fail for at least 7 seconds after unmount which
makes automated testing a little harder when reloading cifs.ko
between test runs.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
CC: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

There is no need to explicitly send SIGKILL to cifs_demultiplex_thread
as it is calling module_put_and_exit to exit cleanly.

socket sk_rcvtimeo is set to 7 HZ so the thread will wake up in 7 seconds and
clean itself.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAshish Sangwan <a.sangwan@samsung.com>
Acked-by: NJeff Layton <jlayton@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Unlikely but possible. When password is supplied multiple times, we have
to free the previous allocation.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAshish Sangwan <a.sangwan@samsung.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

that let us not mix it with EAGAIN.
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

The current "wait_on_bit" interface requires an 'action'
function to be provided which does the actual waiting.
There are over 20 such functions, many of them identical.
Most cases can be satisfied by one of just two functions, one
which uses io_schedule() and one which just uses schedule().

So:
 Rename wait_on_bit and        wait_on_bit_lock to
        wait_on_bit_action and wait_on_bit_lock_action
 to make it explicit that they need an action function.

 Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io
 which are *not* given an action function but implicitly use
 a standard one.
 The decision to error-out if a signal is pending is now made
 based on the 'mode' argument rather than being encoded in the action
 function.

 All instances of the old wait_on_bit and wait_on_bit_lock which
 can use the new version have been changed accordingly and their
 action functions have been discarded.
 wait_on_bit{_lock} does not return any specific error code in the
 event of a signal so the caller must check for non-zero and
 interpolate their own error code as appropriate.

The wait_on_bit() call in __fscache_wait_on_invalidate() was
ambiguous as it specified TASK_UNINTERRUPTIBLE but used
fscache_wait_bit_interruptible as an action function.
David Howells confirms this should be uniformly
"uninterruptible"

The main remaining user of wait_on_bit{,_lock}_action is NFS
which needs to use a freezer-aware schedule() call.

A comment in fs/gfs2/glock.c notes that having multiple 'action'
functions is useful as they display differently in the 'wchan'
field of 'ps'. (and /proc/$PID/wchan).
As the new bit_wait{,_io} functions are tagged "__sched", they
will not show up at all, but something higher in the stack.  So
the distinction will still be visible, only with different
function names (gds2_glock_wait versus gfs2_glock_dq_wait in the
gfs2/glock.c case).

Since first version of this patch (against 3.15) two new action
functions appeared, on in NFS and one in CIFS.  CIFS also now
uses an action function that makes the same freezer aware
schedule call as NFS.
Signed-off-by: NNeilBrown <neilb@suse.de>
Acked-by: David Howells <dhowells@redhat.com> (fscache, keys)
Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2)
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brownSigned-off-by: NIngo Molnar <mingo@kernel.org>

Dan Carpenter says:

The patch 04febabc: "cifs: sanitize username handling" from Jan
17, 2012, leads to the following static checker warning:

	fs/cifs/connect.c:2231 match_session()
	error: we previously assumed 'vol->username' could be null (see line 2228)

fs/cifs/connect.c
  2219                  /* NULL username means anonymous session */
  2220                  if (ses->user_name == NULL) {
  2221                          if (!vol->nullauth)
  2222                                  return 0;
  2223                          break;
  2224                  }
  2225
  2226                  /* anything else takes username/password */
  2227                  if (strncmp(ses->user_name,
  2228                              vol->username ? vol->username : "",
                                    ^^^^^^^^^^^^^
We added this check for vol->username here.

  2229                              CIFS_MAX_USERNAME_LEN))
  2230                          return 0;
  2231                  if (strlen(vol->username) != 0 &&
                                   ^^^^^^^^^^^^^
But this dereference is not checked.

  2232                      ses->password != NULL &&
  2233                      strncmp(ses->password,
  2234                              vol->password ? vol->password : "",
  2235                              CIFS_MAX_PASSWORD_LEN))
  2236                          return 0;

...fix this by ensuring that vol->username is not NULL before running
strlen on it.
Signed-off-by: NJeff Layton <jlayton@poochiereds.net>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

When mounting from a Windows 2012R2 server, we hit the following
problem:
1) Mount with any of the following versions - 2.0, 2.1 or 3.0
2) unmount
3) Attempt a mount again using a different SMB version >= 2.0.

You end up with the following failure:
Status code returned 0xc0000203 STATUS_USER_SESSION_DELETED
CIFS VFS: Send error in SessSetup = -5
CIFS VFS: cifs_mount failed w/return code = -5

I cannot reproduce this issue using a Windows 2008 R2 server.

This appears to be caused because we use the same client guid for the
connection on first mount which we then disconnect and attempt to mount
again using a different protocol version. By generating a new guid each
time a new connection is Negotiated, we avoid hitting this problem.
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Send a smb session logoff request before removing smb session off of the list.
On a signed smb session, remvoing a session off of the list before sending
a logoff request results in server returning an error for lack of
smb signature.

Never seen an error during smb logoff, so as per MS-SMB2 3.2.5.1,
not sure how an error during logoff should be retried. So for now,
if a server returns an error to a logoff request, log the error and
remove the session off of the list.
Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

makes ->d_hash(), ->d_compare() and ->permission() safety in RCU mode
independent from vfsmount_lock.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

and separate smb20_operations struct.
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Move the post (successful) session setup code to respective dialect routines.

For smb1, session key is per smb connection.
For smb2/smb3, session key is per smb session.

If client and server do not require signing, free session key for smb1/2/3.

If client and server require signing
  smb1 - Copy (kmemdup) session key for the first session to connection.
         Free session key of that and subsequent sessions on this connection.
  smb2 - For every session, keep the session key and free it when the
         session is being shutdown.
  smb3 - For every session, generate the smb3 signing key using the session key
         and then free the session key.

There are two unrelated line formatting changes as well.
Reviewed-by: NJeff Layton <jlayton@samba.org>
Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

The max string length definitions for user name, domain name, password,
and share name have been moved into their own header file in uapi so the
mount helper can use autoconf to define them instead of keeping the
kernel side and userland side definitions in sync manually.  The names
have also been standardized with a "CIFS" prefix and "LEN" suffix.
Signed-off-by: NScott Lovenberg <scott.lovenberg@gmail.com>
Reviewed-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Oleksii reported that he had seen an oops similar to this:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000088
IP: [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0
PGD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: ipt_MASQUERADE xt_REDIRECT xt_tcpudp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables carl9170 ath usb_storage f2fs nfnetlink_log nfnetlink md4 cifs dns_resolver hid_generic usbhid hid af_packet uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev rfcomm btusb bnep bluetooth qmi_wwan qcserial cdc_wdm usb_wwan usbnet usbserial mii snd_hda_codec_hdmi snd_hda_codec_realtek iwldvm mac80211 coretemp intel_powerclamp kvm_intel kvm iwlwifi snd_hda_intel cfg80211 snd_hda_codec xhci_hcd e1000e ehci_pci snd_hwdep sdhci_pci snd_pcm ehci_hcd microcode psmouse sdhci thinkpad_acpi mmc_core i2c_i801 pcspkr usbcore hwmon snd_timer snd_page_alloc snd ptp rfkill pps_core soundcore evdev usb_common vboxnetflt(O) vboxdrv(O)Oops#2 Part8
 loop tun binfmt_misc fuse msr acpi_call(O) ipv6 autofs4
CPU: 0 PID: 21612 Comm: kworker/0:1 Tainted: G        W  O 3.10.1SIGN #28
Hardware name: LENOVO 2306CTO/2306CTO, BIOS G2ET92WW (2.52 ) 02/22/2013
Workqueue: cifsiod cifs_echo_request [cifs]
task: ffff8801e1f416f0 ti: ffff880148744000 task.ti: ffff880148744000
RIP: 0010:[<ffffffff814dcc13>]  [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0
RSP: 0000:ffff880148745b00  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff880148745b78 RCX: 0000000000000048
RDX: ffff880148745c90 RSI: ffff880181864a00 RDI: ffff880148745b78
RBP: ffff880148745c48 R08: 0000000000000048 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff880181864a00
R13: ffff880148745c90 R14: 0000000000000048 R15: 0000000000000048
FS:  0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000088 CR3: 000000020c42c000 CR4: 00000000001407b0
Oops#2 Part7
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 ffff880148745b30 ffffffff810c4af9 0000004848745b30 ffff880181864a00
 ffffffff81ffbc40 0000000000000000 ffff880148745c90 ffffffff810a5aab
 ffff880148745bc0 ffffffff81ffbc40 ffff880148745b60 ffffffff815a9fb8
Call Trace:
 [<ffffffff810c4af9>] ? finish_task_switch+0x49/0xe0
 [<ffffffff810a5aab>] ? lock_timer_base.isra.36+0x2b/0x50
 [<ffffffff815a9fb8>] ? _raw_spin_unlock_irqrestore+0x18/0x40
 [<ffffffff810a673f>] ? try_to_del_timer_sync+0x4f/0x70
 [<ffffffff815aa38f>] ? _raw_spin_unlock_bh+0x1f/0x30
 [<ffffffff814dcc87>] kernel_sendmsg+0x37/0x50
 [<ffffffffa081a0e0>] smb_send_kvec+0xd0/0x1d0 [cifs]
 [<ffffffffa081a263>] smb_send_rqst+0x83/0x1f0 [cifs]
 [<ffffffffa081ab6c>] cifs_call_async+0xec/0x1b0 [cifs]
 [<ffffffffa08245e0>] ? free_rsp_buf+0x40/0x40 [cifs]
Oops#2 Part6
 [<ffffffffa082606e>] SMB2_echo+0x8e/0xb0 [cifs]
 [<ffffffffa0808789>] cifs_echo_request+0x79/0xa0 [cifs]
 [<ffffffff810b45b3>] process_one_work+0x173/0x4a0
 [<ffffffff810b52a1>] worker_thread+0x121/0x3a0
 [<ffffffff810b5180>] ? manage_workers.isra.27+0x2b0/0x2b0
 [<ffffffff810bae00>] kthread+0xc0/0xd0
 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120
 [<ffffffff815b199c>] ret_from_fork+0x7c/0xb0
 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120
Code: 84 24 b8 00 00 00 4c 89 f1 4c 89 ea 4c 89 e6 48 89 df 4c 89 60 18 48 c7 40 28 00 00 00 00 4c 89 68 30 44 89 70 14 49 8b 44 24 28 <ff> 90 88 00 00 00 3d ef fd ff ff 74 10 48 8d 65 e0 5b 41 5c 41
 RIP  [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0
 RSP <ffff880148745b00>
CR2: 0000000000000088

The client was in the middle of trying to send a frame when the
server->ssocket pointer got zeroed out. In most places, that we access
that pointer, the srv_mutex is held. There's only one spot that I see
that the server->ssocket pointer gets set and the srv_mutex isn't held.
This patch corrects that.

The upstream bug report was here:

    https://bugzilla.kernel.org/show_bug.cgi?id=60557

Cc: <stable@vger.kernel.org>
Reported-by: NOleksii Shevchuk <alxchk@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

For cifs_set_cifscreds() in "fs/cifs/connect.c", 'desc' buffer length
is 'CIFSCREDS_DESC_SIZE' (56 is less than 256), and 'ses->domainName'
length may be "255 + '\0'".

The related sprintf() may cause memory overflow, so need extend related
buffer enough to hold all things.

It is also necessary to be sure of 'ses->domainName' must be less than
256, and define the related macro instead of hard code number '256'.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: NScott Lovenberg <scott.lovenberg@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Updated patch to try to prevent allocation of cifs, smb2 or smb3 crypto
secmech structures unless needed.  Currently cifs allocates all crypto
mechanisms when the first session is established (4 functions and
4 contexts), rather than only allocating these when needed (smb3 needs
two, the rest of the dialects only need one).
Acked-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Fix build warning in Shirish's recent SMB3 signing patch
which occurs when SMB2 support is disabled in Kconfig.

fs/built-in.o: In function `cifs_setup_session':
>> (.text+0xa1767): undefined reference to `generate_smb3signingkey'

Pointed out by: automated 0-DAY kernel build testing backend
Intel Open Source Technology Center

CC: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

SMB3 uses a much faster method of signing (which is also better in other ways),
AES-CMAC.  With the kernel now supporting AES-CMAC since last release, we
are overdue to allow SMB3 signing (today only CIFS and SMB2 and SMB2.1,
but not SMB3 and SMB3.1 can sign) - and we need this also for checking
secure negotation and also per-share encryption (two other new SMB3 features
which we need to implement).

This patch needs some work in a few areas - for example we need to
move signing for SMB2/SMB3 from per-socket to per-user (we may be able to
use the "nosharesock" mount option in the interim for the multiuser case),
and Shirish found a bug in the earlier authentication overhaul
(setting signing flags properly) - but those can be done in followon
patches.
Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

for NUL terminated string, need alway set '\0' in the end.
Signed-off-by: NZhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

The new Windows update supports SMB3.02 dialect, a minor update to SMB3.
This patch adds support for mounting with vers=3.02
Signed-off-by: NSteve French <smfrench@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>

Now that we track what sort of NEGOTIATE response was received, stop
mandating that every session on a socket use the same type of auth.

Push that decision out into the session setup code, and make the sectype
a per-session property. This should allow us to mix multiple sectypes on
a socket as long as they are compatible with the NEGOTIATE response.

With this too, we can now eliminate the ses->secFlg field since that
info is redundant and harder to work with than a securityEnum.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Acked-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

Currently, we determine this according to flags in the sec_mode, flags
in the global_secflags and via other methods. That makes the semantics
very hard to follow and there are corner cases where we don't handle
this correctly.

Add a new bool to the TCP_Server_Info that acts as a simple flag to tell
us whether signing is enabled on this connection or not, and fix up the
places that need to determine this to use that flag.

This is a bit weird for the SMB2 case, where signing is per-session.
SMB2 needs work in this area already though. The existing SMB2 code has
similar logic to what we're using here, so there should be no real
change in behavior. These changes should make it easier to implement
per-session signing in the future though.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

We have this to some degree already in secFlgs, but those get "or'ed" so
there's no way to know what the last option requested was. Add new fields
that will eventually supercede the secFlgs field in the cifs_ses.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

Currently we have the overrideSecFlg field, but it's quite cumbersome
to work with. Add some new fields that will eventually supercede it.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

This field is completely unused:

CIFS_SES_W9X is completely unused. CIFS_SES_LANMAN and CIFS_SES_OS2
are set but never checked. CIFS_SES_NT4 is checked, but never set.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Acked-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Some servers set max_vcs to 1 and actually do enforce that limit. Add a
new mount option to work around this behavior that forces a mount
request to open a new socket to the server instead of reusing an
existing one.

I'd prefer to come up with a solution that doesn't require this, so
consider this a debug patch that you can use to determine whether this
is the real problem.

Cc: Jim McDonough <jmcd@samba.org>
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

commit 839db3d1 (cifs: fix up handling of prefixpath= option) changed
the code such that the vol->prepath no longer contained a leading
delimiter and then fixed up the places that accessed that field to
account for that change.

One spot in build_unc_path_to_root was missed however. When doing the
pointer addition on pos, that patch failed to account for the fact that
we had already incremented "pos" by one when adding the length of the
prepath. This caused a buffer overrun by one byte.

This patch fixes the problem by correcting the handling of "pos".

Cc: <stable@vger.kernel.org> # v3.8+
Reported-by: NMarcus Moeller <marcus.moeller@gmx.ch>
Reported-by: NKen Fallon <ken.fallon@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

When we allowed separate unc= and prefixpath= mount options, we could
ignore EINVAL errors from cifs_parse_devname. Now that they are
deprecated, we need to check for that as well and fail the mount if it's
malformed.

Also fix a later error message that refers to the unc= option.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

In the case of sec=none, we're not sending a username or password, so
there's little benefit to mandating NTLMSSP auth. Allow it to use
unencapsulated auth in that case.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

server and ses->server are the same, but it's a little bit ugly that we
lock &ses->server->srv_mutex and unlock &server->srv_mutex.  It causes
a false positive in Smatch about inconsistent locking.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

It's not obvious from reading the macro names that these macros
are for debugging.  Convert the names to a single more typical
kernel style cifs_dbg macro.

	cERROR(1, ...)   -> cifs_dbg(VFS, ...)
	cFYI(1, ...)     -> cifs_dbg(FYI, ...)
	cFYI(DBG2, ...)  -> cifs_dbg(NOISY, ...)

Move the terminating format newline from the macro to the call site.

Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the
"CIFS VFS: " prefix for VFS messages.

Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y)

$ size fs/cifs/cifs.ko*
   text    data     bss     dec     hex filename
 265245	   2525	    132	 267902	  4167e	fs/cifs/cifs.ko.new
 268359    2525     132  271016   422a8 fs/cifs/cifs.ko.old

Other miscellaneous changes around these conversions:

o Miscellaneous typo fixes
o Add terminating \n's to almost all formats and remove them
  from the macros to be more kernel style like.  A few formats
  previously had defective \n's
o Remove unnecessary OOM messages as kmalloc() calls dump_stack
o Coalesce formats to make grep easier,
  added missing spaces when coalescing formats
o Use %s, __func__ instead of embedded function name
o Removed unnecessary "cifs: " prefixes
o Convert kzalloc with multiply to kcalloc
o Remove unused cifswarn macro
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

...as advertised for 3.10.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Fixes a regression in cifs_parse_mount_options where a password
which begins with a delimitor is parsed incorrectly as being a blank
password.
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Acked-by: NJeff Layton <jlayton@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

...as promised for 3.9.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Setting this secFlg allows usage of dfs where some servers require
signing and others don't.
Signed-off-by: NMartijn de Gouw <martijn.de.gouw@prodrive.nl>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Cc: Steve French <smfrench@gmail.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Cc: Steve French <smfrench@gmail.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>