The Ethernet controller available in Meson6 and Meson8 SoCs is a
Synopsys DesignWare MAC IP core, already supported by the stmmac
driver.

This glue layer implements some platform-specific settings needed by
the Amlogic variant.
Signed-off-by: NBeniamino Galvani <b.galvani@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds and modifies code to support multiple Multicast and Unicast
Synopsys MAC filter configurations. The default configuration is defined to
support legacy driver behavior, which is 64 Multicast bins. The Unicast
filter code previously assumed all controllers support 32 or 16 Unicast
addresses based on controller version number, but this has been corrected
to support a default of 1 Unicast address. The filter configuration may
be specified through the devicetree using a Synopsys specific device tree
entry. This information was verified with Synopsys through
Synopsys Support Case #8000684337 and shared with the maintainer.
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following patch moved device tree interrupt resolution into
platform_get_irq_byname:

  ad69674e of/irq: do irq resolution in platform_get_irq_byname()

As a result, the function no longer only return -ENXIO on error.
This breaks DT based probing of stmmac, as seen in test runs of
linux-next next-20140526 cubie2-sunxi_defconfig:

  http://lists.linaro.org/pipermail/kernel-build-reports/2014-May/003659.html

This patch makes the stmmac_platform probe function properly handle
error codes, such as returning for deferred probing, and other codes
returned by of_irq_get_by_name.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like the STi and sunxi series SOCs, Altera's SOCFPGA also needs a glue layer
on top of the Synopsys gmac IP.

This patch adds the platform driver for the glue layer which configures the IP
before the generic STMMAC driver takes over.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is to fix the compatibility to the STiD127 SoC.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

STi series SOCs have a glue layer on top of the synopsis gmac IP, this
glue layer needs to be configured before the gmac driver starts using
the IP.

This patch adds a support to this glue layer which is configured via
stmmac setup, init, exit callbacks.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These changes correct the following issues with jumbo frames on the
stmmac driver:

1) The Synopsys EMAC can be configured to support different FIFO
sizes at core configuration time. There's no way to query the
controller and know the FIFO size, so the driver needs to get this
information from the device tree in order to know how to correctly
handle MTU changes and setting up dma buffers. The default
max-frame-size is as currently used, which is the size of a jumbo
frame.

2) The driver was enabling Jumbo frames by default, but was not allocating
dma buffers of sufficient size to handle the maximum possible packet
size that could be received. This led to memory corruption since DMAs were
occurring beyond the extent of the allocated receive buffers for certain types
of network traffic.

kernel BUG at net/core/skbuff.c:126!
Internal error: Oops - BUG: 0 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 563 Comm: sockperf Not tainted 3.13.0-rc6-01523-gf7111b9 #31
task: ef35e580 ti: ef252000 task.ti: ef252000
PC is at skb_panic+0x60/0x64
LR is at skb_panic+0x60/0x64
pc : [<c03c7c3c>]    lr : [<c03c7c3c>]    psr: 60000113
sp : ef253c18  ip : 60000113  fp : 00000000
r10: ef3a5400  r9 : 00000ebc  r8 : ef3a546c
r7 : ee59f000  r6 : ee59f084  r5 : ee59ff40  r4 : ee59f140
r3 : 000003e2  r2 : 00000007  r1 : c0b9c420  r0 : 0000007d
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5387d  Table: 2e8ac04a  DAC: 00000015
Process sockperf (pid: 563, stack limit = 0xef252248)
Stack: (0xef253c18 to 0xef254000)
3c00:                                                       00000ebc ee59f000
3c20: ee59f084 ee59ff40 ee59f140 c04a9cd8 ee8c50c0 00000ebc ee59ff40 00000000
3c40: ee59f140 c02d0ef0 00000056 ef1eda80 ee8c50c0 00000ebc 22bbef29 c0318f8c
3c60: 00000056 ef3a547c ffe2c716 c02c9c90 c0ba1298 ef3a5838 ef3a5838 ef3a5400
3c80: 000020c0 ee573840 000055cb ef3f2050 c053f0e0 c0319214 22b9b085 22d92813
3ca0: 00001c80 004b8e00 ef3a5400 ee573840 ef3f2064 22d92813 ef3f2064 000055cb
3cc0: ef3f2050 c031a19c ef252000 00000000 00000000 c0561bc0 00000000 ff00ffff
3ce0: c05621c0 ef3a5400 ef3f2064 ee573840 00000020 ef3f2064 000055cb ef3f2050
3d00: c053f0e0 c031cad0 c053e740 00000e60 00000000 00000000 ee573840 ef3a5400
3d20: ef0a6e00 00000000 ef3f2064 c032507c 00010000 00000020 c0561bc0 c0561bc0
3d40: ee599850 c032799c 00000000 ee573840 c055a380 ef3a5400 00000000 ef3f2064
3d60: ef3f2050 c032799c 0101c7c0 2b6755cb c059a280 c030e4d8 000055cb ffffffff
3d80: ee574fc0 c055a380 ee574000 ee573840 00002b67 ee573840 c03fe9c4 c053fa68
3da0: c055a380 00001f6f 00000000 ee573840 c053f0e0 c0304fdc ef0a6e01 ef3f2050
3dc0: ee573858 ef031000 ee573840 c03055d8 c0ba0c40 ef000f40 00100100 c053f0dc
3de0: c053ffdc c053f0f0 00000008 00000000 ef031000 c02da948 00001140 00000000
3e00: c0563c78 ef253e5f 00000020 ee573840 00000020 c053f0f0 ef313400 ee573840
3e20: c053f0e0 00000000 00000000 c05380c0 ef313400 00001000 00000015 c02df280
3e40: ee574000 ef001e00 00000000 00001080 00000042 005cd980 ef031500 ef031500
3e60: 00000000 c02df824 ef031500 c053e390 c0541084 f00b1e00 c05925e8 c02df864
3e80: 00001f5c ef031440 c053e390 c0278524 00000002 00000000 c0b9eb48 c02df280
3ea0: ee8c7180 00000100 c0542ca8 00000015 00000040 ef031500 ef031500 ef031500
3ec0: c027803c ef252000 00000040 000000ec c05380c0 c0b9eb40 c0b9eb48 c02df940
3ee0: ef060780 ffffa4dd c0564a9c c056343c 002e80a8 00000080 ef031500 00000001
3f00: c053808c ef252000 fffec100 00000003 00000004 002e80a8 0000000c c00258f0
3f20: 002e80a8 c005e704 00000005 00000100 c05634d0 c0538080 c05333e0 00000000
3f40: 0000000a c0565580 c05380c0 ffffa4dc c05434f4 00400100 00000004 c0534cd4
3f60: 00000098 00000000 fffec100 002e80a8 00000004 002e80a8 002a20e0 c0025da8
3f80: c0534cd4 c000f020 fffec10c c053ea60 ef253fb0 c0008530 0000ffe2 b6ef67f4
3fa0: 40000010 ffffffff 00000124 c0012f3c 0000ffe2 002e80f0 0000ffe2 00004000
3fc0: becb6338 becb6334 00000004 00000124 002e80a8 00000004 002e80a8 002a20e0
3fe0: becb6300 becb62f4 002773bb b6ef67f4 40000010 ffffffff 00000000 00000000
[<c03c7c3c>] (skb_panic+0x60/0x64) from [<c02d0ef0>] (skb_put+0x4c/0x50)
[<c02d0ef0>] (skb_put+0x4c/0x50) from [<c0318f8c>] (tcp_collapse+0x314/0x3ec)
[<c0318f8c>] (tcp_collapse+0x314/0x3ec) from [<c0319214>]
(tcp_try_rmem_schedule+0x1b0/0x3c4)
[<c0319214>] (tcp_try_rmem_schedule+0x1b0/0x3c4) from [<c031a19c>]
(tcp_data_queue+0x480/0xe6c)
[<c031a19c>] (tcp_data_queue+0x480/0xe6c) from [<c031cad0>]
(tcp_rcv_established+0x180/0x62c)
[<c031cad0>] (tcp_rcv_established+0x180/0x62c) from [<c032507c>]
(tcp_v4_do_rcv+0x13c/0x31c)
[<c032507c>] (tcp_v4_do_rcv+0x13c/0x31c) from [<c032799c>]
(tcp_v4_rcv+0x718/0x73c)
[<c032799c>] (tcp_v4_rcv+0x718/0x73c) from [<c0304fdc>]
(ip_local_deliver+0x98/0x274)
[<c0304fdc>] (ip_local_deliver+0x98/0x274) from [<c03055d8>]
(ip_rcv+0x420/0x758)
[<c03055d8>] (ip_rcv+0x420/0x758) from [<c02da948>]
(__netif_receive_skb_core+0x44c/0x5bc)
[<c02da948>] (__netif_receive_skb_core+0x44c/0x5bc) from [<c02df280>]
(netif_receive_skb+0x48/0xb4)
[<c02df280>] (netif_receive_skb+0x48/0xb4) from [<c02df824>]
(napi_gro_flush+0x70/0x94)
[<c02df824>] (napi_gro_flush+0x70/0x94) from [<c02df864>]
(napi_complete+0x1c/0x34)
[<c02df864>] (napi_complete+0x1c/0x34) from [<c0278524>]
(stmmac_poll+0x4e8/0x5c8)
[<c0278524>] (stmmac_poll+0x4e8/0x5c8) from [<c02df940>]
(net_rx_action+0xc4/0x1e4)
[<c02df940>] (net_rx_action+0xc4/0x1e4) from [<c00258f0>]
(__do_softirq+0x12c/0x2e8)
[<c00258f0>] (__do_softirq+0x12c/0x2e8) from [<c0025da8>] (irq_exit+0x78/0xac)
[<c0025da8>] (irq_exit+0x78/0xac) from [<c000f020>] (handle_IRQ+0x44/0x90)
[<c000f020>] (handle_IRQ+0x44/0x90) from [<c0008530>]
(gic_handle_irq+0x2c/0x5c)
[<c0008530>] (gic_handle_irq+0x2c/0x5c) from [<c0012f3c>]
(__irq_usr+0x3c/0x60)

3) The driver was setting the dma buffer size after allocating dma buffers,
which caused a system panic when changing the MTU.

BUG: Bad page state in process ifconfig  pfn:2e850
page:c0b72a00 count:0 mapcount:0 mapping:  (null) index:0x0
page flags: 0x200(arch_1)
Modules linked in:
CPU: 0 PID: 566 Comm: ifconfig Not tainted 3.13.0-rc6-01523-gf7111b9 #29
[<c001547c>] (unwind_backtrace+0x0/0xf8) from [<c00122dc>]
(show_stack+0x10/0x14)
[<c00122dc>] (show_stack+0x10/0x14) from [<c03c793c>] (dump_stack+0x70/0x88)
[<c03c793c>] (dump_stack+0x70/0x88) from [<c00b2620>] (bad_page+0xc8/0x118)
[<c00b2620>] (bad_page+0xc8/0x118) from [<c00b302c>]
(get_page_from_freelist+0x744/0x870)
[<c00b302c>] (get_page_from_freelist+0x744/0x870) from [<c00b40f4>]
(__alloc_pages_nodemask+0x118/0x86c)
[<c00b40f4>] (__alloc_pages_nodemask+0x118/0x86c) from [<c00b4858>]
(__get_free_pages+0x10/0x54)
[<c00b4858>] (__get_free_pages+0x10/0x54) from [<c00cba1c>]
(kmalloc_order_trace+0x24/0xa0)
[<c00cba1c>] (kmalloc_order_trace+0x24/0xa0) from [<c02d199c>]
(__kmalloc_reserve.isra.21+0x24/0x70)
[<c02d199c>] (__kmalloc_reserve.isra.21+0x24/0x70) from [<c02d240c>]
(__alloc_skb+0x68/0x13c)
[<c02d240c>] (__alloc_skb+0x68/0x13c) from [<c02d3930>]
(__netdev_alloc_skb+0x3c/0xe8)
[<c02d3930>] (__netdev_alloc_skb+0x3c/0xe8) from [<c0279378>]
(stmmac_open+0x63c/0x1024)
[<c0279378>] (stmmac_open+0x63c/0x1024) from [<c02e18cc>]
(__dev_open+0xa0/0xfc)
[<c02e18cc>] (__dev_open+0xa0/0xfc) from [<c02e1b40>]
(__dev_change_flags+0x94/0x158)
[<c02e1b40>] (__dev_change_flags+0x94/0x158) from [<c02e1c24>]
(dev_change_flags+0x18/0x48)
[<c02e1c24>] (dev_change_flags+0x18/0x48) from [<c0337bc0>]
(devinet_ioctl+0x638/0x700)
[<c0337bc0>] (devinet_ioctl+0x638/0x700) from [<c02c7aec>]
(sock_ioctl+0x64/0x290)
[<c02c7aec>] (sock_ioctl+0x64/0x290) from [<c0100890>]
(do_vfs_ioctl+0x78/0x5b8)
[<c0100890>] (do_vfs_ioctl+0x78/0x5b8) from [<c0100e0c>] (SyS_ioctl+0x3c/0x5c)
[<c0100e0c>] (SyS_ioctl+0x3c/0x5c) from [<c000e760>]

The fixes have been verified using reproducible, automated testing.
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Allwinner A20 has an ethernet controller that seems to be
an early version of Synopsys DesignWare MAC 10/100/1000 Universal,
which is supported by the stmmac driver.

Allwinner's GMAC requires setting additional registers in the SoC's
clock control unit.

The exact version of the DWMAC IP that Allwinner uses is unknown,
thus the exact feature set is unknown.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The stmmac driver core allows passing feature flags and callbacks via
platform data. Add a similar stmmac_of_data to pass flags and callbacks
tied to compatible strings. This allows us to extend stmmac with glue
layers for different SoCs.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The snps,phy-addr device tree property is non-standard, and should be
removed in favor of proper phy node support. Remove it from the binding
documents and warn if the property is still used.

Most PHYs respond to address 0, but a few don't, so auto-detect PHY
address by default, to make up for the lack of explicit address selection.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

"snps,force_sf_dma_mode" is documented in stmmac device tree bindings,
but is never handled by the driver.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current .init and .exit callbacks requires access to driver
private data structures. This is not a good seperation and abstraction.

Instead, we add a new .setup callback for allocating private data, and
pass the returned pointer to the other callbacks.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The DWMAC has a reset assert line, which is used on some SoCs. Add an
optional reset control to stmmac driver core.

To support reset control deferred probing, this patch changes the driver
probe function to return the actual error, instead of just -EINVAL.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In hibernation freeze case the driver just releases the resources like
dma buffers, irqs, unregisters the drivers and during restore it does
register, request the resources. This is not really necessary, as part
of power management all the data structures are intact, all the
previously allocated resources can be used after coming out of low
power.

This patch uses the suspend and resume callbacks for freeze and
restore which initializes the hardware correctly without unregistering
or releasing the resources, this should also help in reducing the time
to restore.

Also this patch fixes a bug in stmmac_pltfr_restore and
stmmac_pltfr_freeze where it tries to get hold of platform data via
dev_get_platdata call, which would return NULL in device tree cases and
the next if statement would crash as there is no NULL check.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support to "max-speed" property which is a standard
Ethernet device tree property. max-speed specifies maximum speed
(specified in megabits per second) supported the device.

Depending on the clocking schemes some of the boards can only support
few link speeds, so having a way to limit the link speed in the mac
driver would allow such setups to work reliably.

Without this patch there is no way to tell the driver to limit the
link speed.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch marks the function stmmac_pltfr_freeze() and
stmmac_pltfr_restore() in stmmac_platform.c as static because they are
not used outside this file.

Thus, it also removes the following warnings in
ethernet/stmicro/stmmac/stmmac_platform.c:

drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:222:5: warning: no previous prototype for ‘stmmac_pltfr_freeze’ [-Wmissing-prototypes]
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:236:5: warning: no previous prototype for ‘stmmac_pltfr_restore’ [-Wmissing-prototypes]
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge commit 06c54055 did a bad conflict resolution accidentally
leaving out a closing brace.  Add it back.

This breaks a handful of defconfigs on ARM, so it'd be good to see it
applied pretty quickly.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

driver:net:stmmac: Disable DMA store and forward mode if platform data force_thresh_dma_mode is set.

Some synopsys ip implementation doesn't support DMA store and forward mode,
such as BF60x. So, set force_thresh_dma_mode to use DMA thresholds only.
Update document and devicetree as well.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixed the pbl(programmable burst length) setting
using DT. Even though the default pbl is 8, If there is no
pbl property in device tree file, pbl is set 0 and it causes
bandwidth degradation.
Signed-off-by: NByungho An <bh74.an@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds dt support to dwmac version 3.610 and 3.710 these
versions are integrated in STiH415 and STiH416 ARM A9 SOCs.
To support these IP version, some of the device tree properties are
extended.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In some DT use-cases platform data might be already allocated and passed
via AUXDATA. These are the cases where machine level code populates few
callbacks in the platform data.

This patch adds check and reuses platform_data if its valid, before
allocating a new one.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d063
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NRoland Stigge <stigge@antcom.de>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: NRoland Stigge <stigge@antcom.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert  use of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.

devm_ioremap_resource() provides its own error messages so all explicit
error messages can be removed from the failure code paths.

This was found with coccinelle.
Signed-off-by: NSilviu-Mihai Popescu <silviupopescu1990@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The __dev* removal patches for the network drivers ended up messing up
the function prototypes for a bunch of drivers.  This patch fixes all of
them back up to be properly aligned.

Bonus is that this almost removes 100 lines of code, always a nice
surprise.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves calls to ioremap and request_mem_region to
devm_request_and_ioremap call.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes stmmac_pltfr_remove function, which is broken because,
it is accessing plat variable via freed memory priv pointer which gets
freed by free_netdev called from stmmac_dvr_remove.

In short this patch caches the plat pointer in local variable before
calling stmmac_dvr_remove to prevent code accessing freed memory.

Without this patch any attempt to remove the stmmac device will fail as
below:

Unregistering eth 0 ...
Unable to handle kernel paging request at virtual address 6b6b6bab
pgd = de5dc000
[6b6b6bab] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP
Modules linked in: cdev(O+)
CPU: 0    Tainted: G           O  (3.3.1_stm24_0210-b2000+ #25)
PC is at stmmac_pltfr_remove+0x2c/0xa0
LR is at stmmac_pltfr_remove+0x28/0xa0
pc : [<c01b8908>]    lr : [<c01b8904>]    psr: 60000013
sp : def6be78  ip : de6c5a00  fp : 00000000
r10: 00000028  r9 : c082d81d  r8 : 00000001
r7 : de65a600  r6 : df81b240  r5 : c0413fd8  r4 : 00000000
r3 : 6b6b6b6b  r2 : def6be6c  r1 : c0355e2b  r0 : 00000020
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c53c7d  Table: 5e5dc04a  DAC: 00000015
Process insmod (pid: 738, stack limit = 0xdef6a2f0)
Stack: (0xdef6be78 to 0xdef6c000)
be60:                                                       c0413fe0
c0403658
be80: c0400bb0 c019270c c01926f8 c0191478 00000000 c0414014 c0413fe0
c01914d8
bea0: 00000000 c0413fe0 df8045d0 c019109c c0413fe0 c0400bf0 c0413fd8
c018f04c
bec0: 00000000 bf000000 c0413fd8 c01929a0 c0413fd8 bf000000 00000000
c0192bfc
bee0: bf00009c bf000014 def6a000 c000859c 00000000 00000001 bf00009c
bf00009c
bf00: 00000001 bf00009c 00000001 bf0000e4 de65a600 00000001 c082d81d
c0058cd0
bf20: bf0000a8 c004fbd8 c0056414 c082d815 c02aea20 bf0001f0 00b0b008
e0846208
bf40: c03ec8a0 e0846000 0000db0d e0850604 e08504de e0853a24 00000204
000002d4
bf60: 00000000 00000000 0000001c 0000001d 00000009 00000000 00000006
00000000
bf80: 00000003 f63d4e2e 0000db0d bef02ed8 00000080 c000d2e8 def6a000
00000000
bfa0: 00000000 c000d140 f63d4e2e 0000db0d 00b0b018 0000db0d 00b0b008
b6f4f298
bfc0: f63d4e2e 0000db0d bef02ed8 00000080 00000003 00000000 00010000
00000000
bfe0: 00b0b008 bef02c64 00008d20 b6ef3784 60000010 00b0b018 5a5a5a5a
5a5a5a5a
[<c01b8908>] (stmmac_pltfr_remove+0x2c/0xa0) from [<c019270c>]
(platform_drv_remove+0x14/0x18)
[<c019270c>] (platform_drv_remove+0x14/0x18) from [<c0191478>]
(__device_release_driver+0x64/0xa4)
[<c0191478>] (__device_release_driver+0x64/0xa4) from [<c01914d8>]
(device_release_driver+0x20/0x2c)
[<c01914d8>] (device_release_driver+0x20/0x2c) from [<c019109c>]
(bus_remove_device+0xcc/0xdc)
[<c019109c>] (bus_remove_device+0xcc/0xdc) from [<c018f04c>]
(device_del+0x104/0x160)
[<c018f04c>] (device_del+0x104/0x160) from [<c01929a0>]
(platform_device_del+0x18/0x58)
[<c01929a0>] (platform_device_del+0x18/0x58) from [<c0192bfc>]
(platform_device_unregister+0xc/0x18)
[<c0192bfc>] (platform_device_unregister+0xc/0x18) from [<bf000014>]
(r_init+0x14/0x2c [cdev])
[<bf000014>] (r_init+0x14/0x2c [cdev]) from [<c000859c>]
(do_one_initcall+0x90/0x160)
[<c000859c>] (do_one_initcall+0x90/0x160) from [<c0058cd0>]
(sys_init_module+0x15c4/0x1794)
[<c0058cd0>] (sys_init_module+0x15c4/0x1794) from [<c000d140>]
(ret_fast_syscall+0x0/0x30)
Code: e1a04000 e59f0070 eb039b65 e59636e4 (e5933040)
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver probe functions are generally __devinit so they will be
discarded after initialization for non-hotplug kernels.
This was found by a new warning after patch 6a228452 "stmmac: Add
device-tree support" adds a new __devinit function that is called
from stmmac_pltfr_probe.

Without this patch, building socfpga_defconfig results in:

WARNING: drivers/net/ethernet/stmicro/stmmac/stmmac.o(.text+0x5d4c): Section mismatch in reference from the function stmmac_pltfr_probe() to the function .devinit.text:stmmac_probe_config_dt()
The function stmmac_pltfr_probe() references
the function __devinit stmmac_probe_config_dt().
This is often because stmmac_pltfr_probe lacks a __devinit
annotation or the annotation of stmmac_probe_config_dt is wrong.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Acked-by: NStefan Roese <sr@denx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because there are multiple variants to the stmmac/dwmac driver, the
dts bindings should be updated to include version of the IP used.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Acked-by: NStefan Roese <sr@denx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the Energy Efficient Ethernet support to the stmmac.

Please see the driver's documentation for further details about this support
in the driver.

Thanks also goes to Rayagond Kokatanur for his first implementation.

Note:
 to clearly manage and expose the lpi interrupt status and eee ethtool
 stats I've had to do some modifications to the driver's design and I
 found really useful to move other parts of the code (e.g. mmc irq stat)
 in the main directly. So this means that some core has been reworked
 to introduce the EEE.

v1: initial patch
v2: fixed some sparse issues (typos)
v3: erroneously sent the v2 renamed as v3
v4:
	o Fixed the return value of the stmmac_eee_init as suggested by D.Miller
	o Totally reviewed the ethtool support for EEE
	o Added a new internal parameter to tune the SW timer for TX LPI.
v5: do not change any eee setting in case of the stmmac_ethtool_op_set_eee fails
    (it has to return -EOPNOTSUPP in that case).
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patches fixes the driver when built as dynamic module.
In fact, the platform part cannot be built and the probe fails
(thanks to Bob Liu that reported this bug).

v2: as D. Miller suggested, it is not necessary to make the
pci and the platform code mutually exclusive.
Having both could also help, at built time ,to verify that
all the code is validated and compiles fine.

v3: removed wrong Reviewed-by from the patch
Reported-by: NBob Liu <lliubbo@gmail.com>
cc: Rayagond Kokatanur <rayagond@vayavyalabs.com>
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adding casts of objects to the same type is unnecessary
and confusing for a human reader.

For example, this cast:

        int y;
        int *p = (int *)&y;

I used the coccinelle script below to find and remove these
unnecessary casts.  I manually removed the conversions this
script produces of casts with __force, __iomem and __user.

@@
type T;
T *p;
@@

-       (T *)p
+       p

A function in atl1e_main.c was passed a const pointer
when it actually modified elements of the structure.

Change the argument to a non-const pointer.

A function in stmmac needed a __force to avoid a sparse
warning.  Added it.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Recently the dma parameters that can be passed from the platform
have been moved from the plat_stmmacenet_data to the stmmac_dma_cfg.

In case of this new structure is not well allocated the driver can
fails. This is an example how this field is managed in ST platforms

static struct stmmac_dma_cfg gmac_dma_setting = {
        .pbl = 32,
};

static struct plat_stmmacenet_data stih415_ethernet_platform_data[] = {
	{
		.dma_cfg = &gmac_dma_setting,
		.has_gmac = 1,
[snip]

This patch so verifies that the dma_cfg passed from the platform.
In case of it is NULL there is no reason that the driver has to fail
and some default values can be passed. These are ok for all the
Synopsys chips and could impact on performances, only.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
cc: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Freeze and restore can call the custom init/exit functions.
Also the patch adds a custom data field that can be used
for storing platform data useful on restore the embedded
setup (e.g. GPIO, SYSCFG).
Signed-off-by: NFrancesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support to configure the STMMAC ethernet driver via
device-tree instead of platform_data.

Currently, only the properties needed on SPEAr600 are provided. All
other properties should be added once needed on other platforms.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the MAC HW initialization and
the HW feature verification from the open to the probe
function as D. Miller suggested.
So the patch actually reorganizes and tidies-up some parts of
the driver and indeed fixes some problem when tune its HW features.
These can be overwritten by looking at the HW cap register at
run-time and that generated problems.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: NFrancesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Correct spelling "drivr" to "driver" in
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>