* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [netdrvr] ewrk3: correct card detection bug
  cxgb3 - fix white spaces in drivers/net/Kconfig
  myri10ge: update driver version to 1.3.0-1.226
  myri10ge: fix management of >4kB allocated pages
  myri10ge: update wcfifo and intr_coal_delay default values
  myri10ge: Serverworks HT2100 provides aligned PCIe completion
  mv643xx_eth: add mv643xx_eth_shutdown function
  SAA9730: Fix large pile of warnings
  Revert "ucc_geth: returns NETDEV_TX_BUSY when BD ring is full"
  cxgb3 - T3B2 pcie config space
  cxgb3 - Fix potential MAC hang
  cxgb3 - Auto-load FW if mismatch detected
  cxgb3 - fix ethtool cmd on multiple queues port
  Fix return code in pci-skeleton.c
  skge: use per-port phy locking
  skge: mask irqs when device down
  skge: deadlock on tx timeout
  [PATCH] airo: Fix an error path memory leak
  [PATCH] bcm43xx: MANUALWLAN fixes

A little mistake in 8a2bfdcb is making all
transactions synchronous, which reduces ext3 performance to comical levels.

Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the rivafb equivalent of 238576e1.
It fixes rivafb having a default backlight brightness of 0 (no picture at
all) on a PBook 6,1.
Signed-off-by: NGuido Guenther <agx@sigxcpu.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adds device ids of two Fujitsu Siemens Tablet PCs to pnp_dev_table
Signed-off-by: NDanny Kukawka <dkukawka@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the /proc/pid/stat representation of executable boundaries.  It should
show the bounds of the executable, but instead shows the bounds of the
loader.

Before the patch is applied, the bug can be seen by examining, say, inetd:

	# ps | grep inetd
	  610         root          0   S   /usr/sbin/inetd -i
	# cat /proc/610/maps
	c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
	c3180000-c31dede4 r-xs 00000000 00:0b 14582179  /lib/libuClibc-0.9.28.so
	c328c000-c328ea00 rw-p 00008000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
	c3290000-c329b6c0 rw-p 00000000 00:00 0
	c32a0000-c32c0000 rwxp 00000000 00:00 0
	c32d4000-c32d8000 rw-p 00000000 00:00 0
	c3394000-c3398000 rw-p 00000000 00:00 0
	c3458000-c345f464 r-xs 00000000 00:0b 16384612  /usr/sbin/inetd
	c3470000-c34748f8 rw-p 00004000 00:0b 16384612  /usr/sbin/inetd
	c34cc000-c34d0000 rw-p 00000000 00:00 0
	c34d4000-c34d8000 rw-p 00000000 00:00 0
	c34d8000-c34dc000 rw-p 00000000 00:00 0
	# cat /proc/610/stat
	610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 8 0 0 19 0 1 0 94392000718
	950272 0 4294967295 3233480704 3233523592 3274440352 3274439976
 	3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0

The code boundaries are 3233480704 to 3233523592, which are:

	(gdb) p/x 3233480704
	$1 = 0xc0bb0000
	(gdb) p/x 3233523592
	$2 = 0xc0bba788

Which corresponds to this line in the maps file:

	c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so

Which is wrong.  After the patch is applied, the maps file is pretty much
identical (there's some minor shuffling of the location of some of the
anonymous VMAs), but the stat file is now:

	# cat /proc/610/stat
	610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 7 0 0 18 0 1 0 94392000722
	950272 0 4294967295 3276111872 3276141668 3274440352 3274439976
	3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0

The code boundaries are then 3276111872 to 3276141668, which are:

	(gdb) p/x 3276111872
	$1 = 0xc3458000
	(gdb) p/x 3276141668
	$2 = 0xc345f464

And these correspond to this line in the maps file instead:

	c3458000-c345f464 r-xs 00000000 00:0b 16384612  /usr/sbin/inetd

Which is now correct.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the print formatting of three unsigned long fields in /proc/timer_list,
which are currently being formatted as signed long.
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It turned out that it is almost impossible to trust ACPI, BIOS & Co.
regarding the C states. This was the reason to switch the local apic
timer off in C2 state already. OTOH there are sane and well behaving
systems, which get punished by that decision.

Allow the user to confirm that the local apic timer is trustworthy in C2
state. This keeps the default behaviour on the safe side.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 25496cae, which
broke bootup on at least Ingo's ThinkPad T60.  Need to figure out
exactly what is wrong before we can re-do the logic.
Requested-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Arwin Vosselman pointed out:
> The ewrk3-driver doesn't function with 2.6.16-kernels (used 2.6.16.41 for
> my tests). Cards will never be detected due to this bug.
>
> drivers/net/ewrks3.c:
> Line 417 reads:
>
> if (nicsr == (CSR_TXD | CSR_RXD))
>
> that should be:
>
> if (nicsr != (CSR_TXD | CSR_RXD))
>
> Comparison with the same line in v2.4 shows why:
>
> 2.4:
> if (nicsr == (CSR_TXD | CSR_RXD)){
>
> blah, blah
> ==========
> 2.6:
> if (nicsr == (CSR_TXD | CSR_RXD))
>     return -ENXIO;
>
> blah, blah
> ==========
>
> blah,blah will not, but should, be executed in 2.6 with a card being present.
>
> The fix mentioned above solves this bug.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into tmp

Use tabs instead of white spaces for CHELSIO_T3 entry.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Driver version is now 1.3.0-1.226.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix management of allocated physical pages when the architecture
page size is not 4kB since the firmware cannot cross 4K boundary.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Update the default value of 2 module parameters:
* wcfifo disabled
* intr_coal_delay 75us
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

[PATCH 1/4] myri10ge: Serverworks HT2100 provides aligned PCIe completion

Use the regular firmware on Serverworks HT2100 PCIe ports since this
chipset provides aligned PCIe completion.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

mv643xx_eth_shutdown is needed for kexec.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The SAA9730 driver doesn't quite grok what the difference between an ioport
and memory mapped I/O is.  It just happened to work on the one Linux
system the SAA9730 happens to spend it's misserable existence on.

drivers/net/saa9730.c: In function 'evm_saa9730_enable_lan_int':
drivers/net/saa9730.c:68: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:70: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:72: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'evm_saa9730_disable_lan_int':
drivers/net/saa9730.c:78: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:80: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'evm_saa9730_clear_lan_int':
drivers/net/saa9730.c:85: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'evm_saa9730_block_lan_int':
drivers/net/saa9730.c:91: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'evm_saa9730_unblock_lan_int':
drivers/net/saa9730.c:97: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'show_saa9730_regs':
drivers/net/saa9730.c:150: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'lan_saa9730_allocate_buffers':
drivers/net/saa9730.c:292: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:295: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:302: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:305: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:312: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'lan_saa9730_cam_load':
drivers/net/saa9730.c:329: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:332: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'lan_saa9730_mii_init':
drivers/net/saa9730.c:369: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:395: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:403: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:410: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:432: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'lan_saa9730_control_init':
drivers/net/saa9730.c:470: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:474: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:478: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:484: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:487: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:490: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:493: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'lan_saa9730_stop':
drivers/net/saa9730.c:505: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:508: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:510: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'lan_saa9730_dma_init':
drivers/net/saa9730.c:536: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'lan_saa9730_start':
drivers/net/saa9730.c:556: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:560: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:564: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:567: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'lan_saa9730_tx':
drivers/net/saa9730.c:590: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'lan_saa9730_rx':
drivers/net/saa9730.c:664: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:729: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'lan_saa9730_write':
drivers/net/saa9730.c:848: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c: In function 'lan_saa9730_set_multicast':
drivers/net/saa9730.c:943: warning: passing argument 2 of 'outl' makes integer from pointer without a cast
drivers/net/saa9730.c:949: warning: passing argument 2 of 'outl' makes integer from pointer without a cast

Fixed by using writel instead of outl.  42 warnings less.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This reverts commit 18babd38.

Michael Barkowski points out that it's wrong, and I agree.  The
patch causes a problem rather than fixes one after another
patch "ucc_geth: Fix BD processing" was applied.  Before that
patch, current packet should be blocked.  However after the patch
current packet is ok and we only need to block next.
Reported-by: NMichael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

T3B2 does not lose its pcie config space on reset.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Under rare conditions, the MAC might hang while generating a pause frame.
This patch fine tunes the MAC settings to avoid the issue, allows for
periodic MAC state check, and triggers a recovery if hung.

Also fix one MAC statistics counter for the rev board T3B2.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The driver attempts to upgrade the FW if the card has the wrong version.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Limit ethtool -g/-G to the given port's queues.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

We assign the return value of register_netdev to i, but return rc later
on. Fix it.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Rather than a workqueue and a per-board mutex to control PHY,
use a tasklet and spinlock. Tasklet is lower overhead and works
just as well for this.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Wheen a port on the skge driver is not used, it should
mask off interrupts from theat port.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The skge driver will deadlock if gets a transmit timeout
because the netif_tx_lock() is already held.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Allow reset of file to ATTR_NORMAL when archive bit not set
  [CIFS] Do not negotiate new POSIX_PATH_OPERATIONS_CAP yet
  [CIFS] reset mode when client notices that ATTR_READONLY is no longer set

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: IA64: fix %ll build warnings
  ACPI: IA64: fix allnoconfig build
  ACPI: Only use IPI on known broken machines (AMD, Dothan/BaniasPentium M)
  ACPI: ibm-acpi: allow module to load when acpi notifiers can't be set (v2)
  ACPI: parse 2nd MADT by default
  ACPICA: revert "acpi_serialize" changes
  sony-laptop: MAINTAINERS fix entry, add L: and W:
  ACPI: resolve HP nx6125 S3 immediate wakeup regression
  ACPI: Add support to parse 2nd MADT

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Bypass hcall stats until cpu features have run
  [POWERPC] Avoid hypervisor statistics calculation in real mode
  [POWERPC] Fix atomicity of TIF update in flush_thread()

latest -git triggers an irqtrace/lockdep warning of a leaked
irqs-off condition:

  BUG: at kernel/fork.c:1033 copy_process()

after some debugging it turns out that commit ca1b940c accidentally left
interrupts disabled - which trickled down all the way to the first time
we fork a kernel thread and triggered the warning.

the fix is to re-enable interrupts in the 'else' branch of
setup_boot_APIC_clock()'s pmtimers calibration path.
Reported-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@brown.paperbag.linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lockdep's data shouldn't be used when debug_locks == 0 because it's not
updated after this, so it's more misleading than helpful.

PS: probably lockdep's current-> fields should be reset after it turns
debug_locks off: so, after printing a bug report, but before return from
exported functions, but there are really a lot of these possibilities (e.g.
 after DEBUG_LOCKS_WARN_ON), so, something could be missed.  (Of course
direct use of this fields isn't recommended either.)
Reported-by: NFolkert van Heusden <folkert@vanheusden.com>
Inspired-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NJarek Poplawski <jarkao2@o2.pl>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since freezable workqueues are broken in 2.6.21-rc
(cf. http://marc.theaimsgroup.com/?l=linux-kernel&m=116855740612755,
http://marc.theaimsgroup.com/?l=linux-kernel&m=117261312523921&w=2)
it's better to change the only user of them, which is XFS, to use "normal"
nonfreezable workqueues.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: David Chinner <dgc@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lockdep found a bug during a run of workqueue function - this could be also
caused by a bug from other code running simultaneously.

lockdep really shouldn't be used when debug_locks == 0!
Reported-by: NFolkert van Heusden <folkert@vanheusden.com>
Inspired-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NJarek Poplawski <jarkao2@o2.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It causes extra moon icons blinking on x60, and breaks at least two other
systems.

During resume, we do not know that "reboot"/"shutdown" method was used, so
we assume "plaform" and call BIOS, anyway...

This is 2.6.21 material, and should fix 2 or 3 regressions from 2.6.20.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the SYSV SHM nattch counter work correctly by forcing multiple VMAs to
be produced to represent MAP_SHARED segments, even if they overlap exactly.

Using this test program:

	http://people.redhat.com/~dhowells/doshm.c

Run as:

	doshm sysv

I can see nattch going from one before the patch:

	# /doshm sysv
	Command: sysv
	shmid: 65536
	memory: 0xc3700000
	c0b00000-c0b04000 rw-p 00000000 00:00 0
	c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
	c3180000-c31dede4 r-xs 00000000 00:0b 14582179  /lib/libuClibc-0.9.28.so
	c3520000-c352278c rw-p 00000000 00:0b 13763417  /doshm
	c3584000-c35865e8 r-xs 00000000 00:0b 13763417  /doshm
	c3588000-c358aa00 rw-p 00008000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
	c3590000-c359b6c0 rw-p 00000000 00:00 0
	c3620000-c3640000 rwxp 00000000 00:00 0
	c3700000-c37fa000 rw-S 00000000 00:06 1411      /SYSV00000000 (deleted)
	c3700000-c37fa000 rw-S 00000000 00:06 1411      /SYSV00000000 (deleted)
	nattch 1

To two after the patch:

	# /doshm sysv
	Command: sysv
	shmid: 0
	memory: 0xc3700000
	c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
	c3180000-c31dede4 r-xs 00000000 00:0b 14582179  /lib/libuClibc-0.9.28.so
	c3320000-c3340000 rwxp 00000000 00:00 0
	c3530000-c35325e8 r-xs 00000000 00:0b 13763417  /doshm
	c3534000-c353678c rw-p 00000000 00:0b 13763417  /doshm
	c3538000-c353aa00 rw-p 00008000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
	c3590000-c359b6c0 rw-p 00000000 00:00 0
	c35a4000-c35a8000 rw-p 00000000 00:00 0
	c3700000-c37fa000 rw-S 00000000 00:06 1369      /SYSV00000000 (deleted)
	c3700000-c37fa000 rw-S 00000000 00:06 1369      /SYSV00000000 (deleted)
	nattch 2

That's +1 to nattch for each shmat() made.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Supply a get_unmapped_area() to fix NOMMU SYSV SHM support.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NAdam Litke <agl@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix unannotated variable declarations.  Variables that have allocation
section annotations (such as __meminitdata) on their definitions must also
have them on their declarations as not doing so may affect the addressing
mode used by the compiler and may result in a linker error.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The local APIC timer stops to work in deeper C-States.  This is handled by
the ACPI code and a broadcast mechanism in the clockevents / tick managment
code.

Some systems do not expose the deeper C-States to the kernel, but switch
into deeper C-States behind the kernels back.  This delays the local apic
timer interrupts for ever and makes the systems unusable.

Add a command line option to disable the local apic timer and a dmi
quirk for known broken systems.

Andi sayeth:

  While not wrong by itself i think it is still better to use some heuristic
  -- like "has battery in ACPI" With the DMI table if the problem is more wide
  spread we will just continue extending it.

  But anyways should be ok now for .21 although I'm not really happy with
  it.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Grudgingly-acked-by: NAndi Kleen <ak@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The SNAPSHOT_S2RAM ioctl does not disable the nonboot CPUs before entering
the suspend, although it should do this.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I added the 'Q' to list. A short description in the `Ok, so what can I
use them for'-section, on when or why to use it would be nice!
Signed-off-by: NJohannes Weiner <hannes-kernel@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>