Use hmac_ctrl bit value saved in setauthsize callback.
Signed-off-by: NHarsh Jain <harsh@chelsio.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

templates(gcm,ccm etc) inherit priority value of driver to
calculate its priority. In some cases template priority becomes
 more than driver priority for same algo.
Without this patch we will not be able to use driver authenc algos. It will
be good if it pushed in stable kernel.
Signed-off-by: NHarsh Jain <harsh@chelsio.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Decompress function in LZ4 library is supposed to return an error code or
negative result. But, it returns -1 when any error is detected. Return
error code when the library returns negative value.
Signed-off-by: NMyungho Jung <mhjungk@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The author meant to free the variable that was just allocated, instead
of the one that failed to be allocated, but made a simple typo. This
patch rectifies that.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

With the new explicit IV generators, we may now exceed the 64-byte
length limit on the algorithm name, e.g., with

	echainiv(authencesn(hmac(sha256-generic),cbc(des3_ede-generic)))

This patch extends the length limit to 128 bytes.
Reported-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>
Tested-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>

This patch fixes the xfrm_user code to use the actual array size
rather than the hard-coded CRYPTO_MAX_ALG_NAME length.  This is
because the array size is fixed at 64 bytes while we want to increase
the in-kernel CRYPTO_MAX_ALG_NAME value.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>
Tested-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>

This patch removes the hard-coded 64-byte limit on the length
of the algorithm name through bind(2).  The address length can
now exceed that.  The user-space structure remains unchanged.
In order to use a longer name simply extend the salg_name array
beyond its defined 64 bytes length.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch hard-codes CRYPTO_MAX_NAME in the user-space API to
64, which is the current value of CRYPTO_MAX_ALG_NAME.  This patch
also replaces all remaining occurences of CRYPTO_MAX_ALG_NAME
in the user-space API with CRYPTO_MAX_NAME.

This way the user-space API will not be modified when we raise
the value of CRYPTO_MAX_ALG_NAME.

Furthermore, the code has been updated to handle names longer than
the user-space API.  They will be truncated.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>
Tested-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>

Some hardware RNGs provide a single register for obtaining random data.
Instead of signaling when new data is available, the reader must wait a
fixed amount of time between reads for new data to be generated.
timeriomem_rng implements this scheme with the period specified in
platform data or device tree.  While the period is specified in
microseconds, the implementation used a standard timer which has a
minimum delay of 1 jiffie and caused a significant bottleneck for
devices that can update at 1us.  By switching to an hrtimer, 1us periods
now only delay at most 2us per read.
Signed-off-by: NRick Altherr <raltherr@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

No functional changes.
Signed-off-by: NRick Altherr <raltherr@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Preserves the existing behavior of only returning 32-bits per call.
Signed-off-by: NRick Altherr <raltherr@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The operand is an integer constant, make the constness explicit by
adding the modifier. This is needed for clang to generate valid code
and also works with gcc.

Also change the constraint of the operand from 'I' ("Integer constant
that is valid as an immediate operand in an ADD instruction", AArch64)
to 'i' ("An immediate integer operand").

Based-on-patch-from: Greg Hackmann <ghackmann@google.com>
Signed-off-by: NGreg Hackmann <ghackmann@google.com>
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since the gf128mul_x_ble function used by xts.c is now defined inline
in the header file, the XTS module no longer depends on gf128mul.
Therefore, the 'select CRYPTO_GF128MUL' line can be safely removed.
Signed-off-by: NOndrej Mosnacek <omosnacek@gmail.com>
Reviewd-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The le128_gf128mul_x_ble function in glue_helper.h is now obsolete and
can be replaced with the gf128mul_x_ble function from gf128mul.h.
Signed-off-by: NOndrej Mosnacek <omosnacek@gmail.com>
Reviewd-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently, gf128mul_x_ble works with pointers to be128, even though it
actually interprets the words as little-endian. Consequently, it uses
cpu_to_le64/le64_to_cpu on fields of type __be64, which is incorrect.

This patch fixes that by changing the function to accept pointers to
le128 and updating all users accordingly.
Signed-off-by: NOndrej Mosnacek <omosnacek@gmail.com>
Reviewd-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The gf128mul_x_ble function is currently defined in gf128mul.c, because
it depends on the gf128mul_table_be multiplication table.

However, since the function is very small and only uses two values from
the table, it is better for it to be defined as inline function in
gf128mul.h. That way, the function can be inlined by the compiler for
better performance.

For consistency, the other gf128mul_x_* functions are also moved to the
header file. In addition, the code is rewritten to be constant-time.

After this change, the speed of the generic 'xts(aes)' implementation
increased from ~225 MiB/s to ~235 MiB/s (measured using 'cryptsetup
benchmark -c aes-xts-plain64' on an Intel system with CRYPTO_AES_X86_64
and CRYPTO_AES_NI_INTEL disabled).
Signed-off-by: NOndrej Mosnacek <omosnacek@gmail.com>
Reviewd-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Acked-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The AES GCM function (in ccp-ops) requires a fair amount of
stack space, which elicits a complaint when KASAN is enabled.
Rearranging and packing a few structures eliminates the
warning.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Endianness is dealt with when the command descriptor is
copied into the command queue. Remove any occurrences of
cpu_to_le32() found elsewhere.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add STM32 crypto support in stm32_defconfig file.
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Enable the CRC (CRC32 crypto) on stm32746g-eval board
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add CRC (CRC32 crypto) support to stm32f746.
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This module registers a CRC32 ("Ethernet") and a CRC32C (Castagnoli)
algorithm that make use of the STMicroelectronics STM32 crypto hardware.

Theses algorithms are compatible with the little-endian generic ones.
Both algorithms use ~0 as default seed (key).
With CRC32C the output is xored with ~0.

Using TCRYPT CRC32C speed test, this shows up to 900% speedup compared
to the crc32c-generic algorithm.
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Document device tree bindings for the STM32 CRC (crypto CRC32)
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Merge the crypto tree to resolve conflict between caam changes.

RNG instantiation was previously fixed by
commit 62743a41 ("crypto: caam - fix RNG init descriptor ret. code checking")
while deinstantiation was not addressed.

Since the descriptors used are similar, in the sense that they both end
with a JUMP HALT command, checking for errors should be similar too,
i.e. status code 7000_0000h should be considered successful.

Cc: <stable@vger.kernel.org> # 3.13+
Fixes: 1005bccd ("crypto: caam - enable instantiation of all RNG4 state handles")
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In case caam_jr_alloc() fails, ctx->dev carries the error code,
thus accessing it with dev_err() is incorrect.

Cc: <stable@vger.kernel.org> # 4.8+
Fixes: 8c419778 ("crypto: caam - add support for RSA algorithm")
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The way Job Ring platform devices are created and released does not
allow for multiple create-release cycles.

JR0 Platform device creation error
JR0 Platform device creation error
caam 2100000.caam: no queues configured, terminating
caam: probe of 2100000.caam failed with error -12

The reason is that platform devices are created for each job ring:

        for_each_available_child_of_node(nprop, np)
                if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") ||
                    of_device_is_compatible(np, "fsl,sec4.0-job-ring")) {
                        ctrlpriv->jrpdev[ring] =
                                of_platform_device_create(np, NULL, dev);

which sets OF_POPULATED on the device node, but then it cleans these up:

        /* Remove platform devices for JobRs */
        for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) {
                if (ctrlpriv->jrpdev[ring])
                        of_device_unregister(ctrlpriv->jrpdev[ring]);
        }

which leaves OF_POPULATED set.

Use of_platform_populate / of_platform_depopulate instead.
This allows for a bit of driver clean-up, jrpdev is no longer needed.

Logic changes a bit too:
-exit in case of_platform_populate fails, since currently even QI backend
depends on JR; true, we no longer support the case when "some" of the JR
DT nodes are incorrect
-when cleaning up, caam_remove() would also depopulate RTIC in case
it would have been populated somewhere else - not the case for now

Cc: <stable@vger.kernel.org>
Fixes: 313ea293 ("crypto: caam - Add Platform driver for Job Ring")
Reported-by: NRussell King <rmk+kernel@armlinux.org.uk>
Suggested-by: NRob Herring <robh+dt@kernel.org>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use sg_virt() instead of open-coding it.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

An SGL to be initialized only once even when its buffers are written
to several times.
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

3DES is missing the fips_allowed flag for CTR mode.
Signed-off-by: NMarcelo Henrique Cerri <marcelo.cerri@canonical.com>
Acked-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

kernelci.org reports a build-time regression on linux-next, with a harmless
warning in x86 allmodconfig:

drivers/crypto/cavium/zip/zip_main.c:489:18: warning: format '%ld' expects argument of type 'long int', but argument 7 has type 'long long int' [-Wformat=]
drivers/crypto/cavium/zip/zip_main.c:489:18: warning: format '%ld' expects argument of type 'long int', but argument 6 has type 'long long int' [-Wformat=]
drivers/crypto/cavium/zip/zip_main.c:489:18: warning: format '%ld' expects argument of type 'long int', but argument 5 has type 'long long int' [-Wformat=]

The return type for atomic64_read() unfortunately differs between
architectures, with some defining it as atomic_long_read() and others
returning a 64-bit type explicitly. Fixing this in general would be nice,
but also require changing other users of these functions, so the simpler
workaround is to add a cast here that avoids the warnings on the default
build.

Fixes: 09ae5d37 ("crypto: zip - Add Compression/Decompression statistics")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

There is a typo here.  It should be "stats" instead of "state".  The
impact is that we clear 224 bytes instead of 80 and we zero out memory
that we shouldn't.

Fixes: 09ae5d37 ("crypto: zip - Add Compression/Decompression statistics")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add kernel-doc to s5p_aes_dev structure.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The driver uses type of device (variant) only during probe so there is
no need to store it for later.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Driver is capable of handling only one request at a time and it stores
it in its state container struct s5p_aes_dev.  This stored request must be
protected between concurrent invocations (e.g. completing current
request and scheduling new one).  Combination of lock and "busy" field
is used for that purpose.

When "busy" field is true, the driver will not accept new request thus
it will not overwrite currently handled data.

However commit 28b62b14 ("crypto: s5p-sss - Fix spinlock recursion
on LRW(AES)") moved some of the write to "busy" field out of a lock
protected critical section.  This might lead to potential race between
completing current request and scheduling a new one.  Effectively the
request completion might try to operate on new crypto request.

Cc: <stable@vger.kernel.org> # v4.10.x
Fixes: 28b62b14 ("crypto: s5p-sss - Fix spinlock recursion on LRW(AES)")
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support to submit ablkcipher and authenc algorithms
via the QI backend:
-ablkcipher:
cbc({aes,des,des3_ede})
ctr(aes), rfc3686(ctr(aes))
xts(aes)
-authenc:
authenc(hmac(md5),cbc({aes,des,des3_ede}))
authenc(hmac(sha*),cbc({aes,des,des3_ede}))

caam/qi being a new driver, let's wait some time to settle down without
interfering with existing caam/jr driver.
Accordingly, for now all caam/qi algorithms (caamalg_qi module) are
marked to be of lower priority than caam/jr ones (caamalg module).
Signed-off-by: NVakul Garg <vakul.garg@nxp.com>
Signed-off-by: NAlex Porosanu <alexandru.porosanu@nxp.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

CAAM engine supports two interfaces for crypto job submission:
-job ring interface - already existing caam/jr driver
-Queue Interface (QI) - caam/qi driver added in current patch

QI is present in CAAM engines found on DPAA platforms.
QI gets its I/O (frame descriptors) from QMan (Queue Manager) queues.

This patch adds a platform device for accessing CAAM's queue interface.
The requests are submitted to CAAM using one frame queue per
cryptographic context. Each crypto context has one shared descriptor.
This shared descriptor is attached to frame queue associated with
corresponding driver context using context_a.

The driver hides the mechanics of FQ creation, initialisation from its
applications. Each cryptographic context needs to be associated with
driver context which houses the FQ to be used to transport the job to
CAAM. The driver provides API for:
(a) Context creation
(b) Job submission
(c) Context deletion
(d) Congestion indication - whether path to/from CAAM is congested

The driver supports affining its context to a particular CPU.
This means that any responses from CAAM for the context in question
would arrive at the given CPU. This helps in implementing one CPU
per packet round trip in IPsec application.

The driver processes CAAM responses under NAPI contexts.
NAPI contexts are instantiated only on cores with affined portals since
only cores having their own portal can receive responses from DQRR.

The responses from CAAM for all cryptographic contexts ride on a fixed
set of FQs. We use one response FQ per portal owning core. The response
FQ is configured in each core's and thus portal's dedicated channel.
This gives the flexibility to direct CAAM's responses for a crypto
context on a given core.
Signed-off-by: NVakul Garg <vakul.garg@nxp.com>
Signed-off-by: NAlex Porosanu <alexandru.porosanu@nxp.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

A few other things need to be added in soc/qman, such that
caam/qi won't open-code them.
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>