This patch keeps intel_plane_state->src rect back
into 16.16 format.

v2:
-sprite src rect to match primary format (Matt, Daniel)

v3:
-moved a hunk from #14 to keep src rect in check & commit in tandom (Matt)
Signed-off-by: NChandra Konduru <chandra.konduru@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Initializing scalers with supported values during crtc init.

v2:
-initialize single copy of min/max values (Matt)

v3:
-moved gen check to callsite (Matt)

v4:
-squashed planes begin with no scaler to here (me)

v5:
-updated init function with updated scaler state structure (Matt)
Signed-off-by: NChandra Konduru <chandra.konduru@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch initializes plane colorkey to NONE.
Signed-off-by: NChandra Konduru <chandra.konduru@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

skylake scaler structure definitions. scalers live in crtc_state as
they are pipe resources. They can be used either as plane scaler or
panel fitter.

scaler assigned to either plane (for plane scaling) or crtc (for panel
fitting) is saved in scaler_id in plane_state or crtc_state respectively.

scaler_id is used instead of scaler pointer in plane or crtc state
to avoid updating scaler pointer everytime a new crtc_state is created.

v2:
-made single copy of min/max values for scalers (Matt)

v3:
-updated commentary for scaler_id (me)

v4:
-converted src/dst ranges to #defines, dropped ratios (Matt)
Signed-off-by: NChandra Konduru <chandra.konduru@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Adding register definitions for skylake scalers.
v2:
-add #define for plane selection mask (me)
Signed-off-by: NChandra Konduru <chandra.konduru@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When RC6 along with Render power gating is enabled, GPU hang
happens due to lack of synchronization between GTI and Render
power gating.

v2: Updated commit message and WA name (Damien)

Change-Id: If1614206341eb52a21eadae8c5ebb2655029b50c
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NSagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Connector states were being allocated in intel_setup_outputs() in loop
over all connectors. That meant hot-added connectors would have a NULL
state. Since the change to use a struct drm_atomic_state for the legacy
modeset, connector states are necessary for the i915 driver to function
properly, so that would lead to oopses.

v2: Fix test for intel_connector_init() success in lvds and sdvo (PRTS)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reported-and-tested-by: NNicolas Kalkhof <nkalkhof@web.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

After commit d7b9ca2f
("drm/i915: Remove request->uniq")

dev_priv is no longer needed.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fix DEBUG_FS=n build broken by

commit aa7471d2
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Wed Apr 1 11:15:21 2015 +0300

    drm/i915: add i915 specific connector debugfs file for DPCD
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move to i915_vma_bind as it is part of the binding.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Moving creation of property in a function, checking for 90/270
rotation simultaneously (Chris)
Letting primary plane to be positioned
v3: Adding if/else for 90/270 and rest params programming, adding check for
pixel_format, some cleanup (review comments)
v4: Adding right pixel_formats, using src_* params instead of crtc_* for offset
and size programming (Ville)
v5: Rebased on -nightly and Tvrtko's series for gtt remapping.
v6: Rebased on -nightly (Tvrtko's series merged)
v7: Moving pixel_format check to intel_atomic_plane_check (Matt)
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Change-Id: I4253459c075c50d9b6f034b4ed4ad2f54cd7d1d7
Signed-off-by: NSagar Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since the following commit, the PLL calculations are done earlier, so
the code following the comment doesn't do anything PLL or encoder
related. It only updates the primary plane now.

commit f3019a4d
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Wed Oct 29 11:32:37 2014 +0200

    drm/i915: Remove crtc_mode_set() hook
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When looking for viable candidates to shrink, we only want objects that
are not pinned. However to do so we performed a double iteration over
the vma in the objects, first looking for the pin-count, then looking
for allocations. We can do both at once and be slightly more explicit in
our validity test.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As we never expose context objects directly to userspace, we can forgo
allocating a first-class GEM object for them and prefer to use the
limited resource of reserved/stolen memory for them. Note this means
that their initial contents are undefined.

However, a downside of using stolen objects for execlists is that we
cannot access the physical address directly (thanks MCH!) which prevents
their use.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We already assign a unique identifier to every request: seqno. That
someone felt like adding a second one without even mentioning why and
tweaking ABI smells very fishy.

Fixes regression from
commit b3a38998
Author: Nick Hoath <nicholas.hoath@intel.com>
Date:   Thu Feb 19 16:30:47 2015 +0000

    drm/i915: Fix a use after free, and unbalanced refcounting

v2: Rebase
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Nick Hoath <nicholas.hoath@intel.com>
Cc: Thomas Daniel <thomas.daniel@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
[danvet: Fixup because different merge order.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Remove some needless variables and parameter passing.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Similar in vain in reducing the number of unrequired spinlocks used for
execlist command submission (where the forcewake is required but
manually controlled), we know that the IRQ registers are outside of the
powerwell and so we can access them directly. Since we now have direct
access exported via I915_READ_FW/I915_WRITE_FW, lets put those to use in
the irq handlers as well.

In the process, reorder the execlist submission to happen as early as
possible.

v2: Restrict the untraced register mmio to just the GT path (i.e. the
hotpath for execlists)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This eliminates six needless spin lock/unlock pairs when writing out
ELSP.

v2: Respin with my preferred colour.
v3: Mostly back to the original colour

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v1]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Already tagged this one and 0-day builder is failing me.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

vma are more frequently allocated than objects and so should equally
benefit from having a dedicated slab.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

requests are even more frequently allocated than objects and equally
benefit from having a dedicated slab.

v2: Rebase
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Once we have full atomic modeset, these kind of flags should be in a
real intel_crtc_state that's tracked properly.  In the meantime, make
sure we clear out any old flags at the beginning of a transaction so
that we don't wind up seeing leftover flags from old transactions that
were checked, but never went to the commit step.  At the moment, a
failed check or prepare could leave stale flags behind that interfere
with the next atomic transaction.

v2: Just do a memset; the series this patch was originally part of
    placed additional fields into the structure that shouldn't be
    cleared, but that's no longer the case.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Switch from our plane update/disable entrypoints to use the full atomic
helpers (which generate a top-level atomic transaction) rather than the
transitional helpers (which only create/manipulate orphaned plane states
independent of a top-level transaction).  Various upcoming work (SKL
scalers, atomic watermarks, etc.) requires a full atomic transaction to
behave properly/cleanly.

Last time we tried this, we had to back out the change because we still
call the drm_plane vfuncs directly from within our legacy modesetting
code.  This potentially results in nested atomic transactions, locking
collisions, and other failures.  To avoid that problem again, we
sidestep the issue by calling the transitional helpers directly (rather
than through a vfunc) when we're nested inside of other legacy
modesetting code.  However this does allow legacy SetPlane() ioctl's to
process an entire drm_atomic_state transaction, which is important for
upcoming patches.

Cc: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Adding drm helper function to return plane pointer from index where
index is a returned by drm_plane_index.

v2:
-avoided nested loop by adding loop count (Daniel)

v3:
-updated patch header prefix to 'drm' (Matt)

v4:
-fixed a kerneldoc issue (kbuild-internal)

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NChandra Konduru <chandra.konduru@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Acked-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

After the removal of DRI1, all access to the rings are through requests
and so we can always be sure that there is a request to wait upon to
free up available space. The fallback code only existed so that we could
quiesce the GPU following unmediated access by DRI1.

v2: Rebase
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When we submit a request to the GPU, we first take the rpm wakelock, and
only release it once the GPU has been idle for a small period of time
after all requests have been complete. This means that we are sure no
new interrupt can arrive whilst we do not hold the rpm wakelock and so
can drop the individual get/put around every single request inside
execlists.

Note: to close one potential issue we should mark the GPU as busy
earlier in __i915_add_request.

To elaborate: The issue is that we emit the irq signalling sequence
before we grab the rpm reference, which means we could miss the
resulting interrupt (since that's not set up when suspended). The only
bad side effect is a missed interrupt, gt mmio writes automatically
wake up the hw itself. But otoh we have an umbrella rpm reference for
the entirety of execbuf, as long as that's there we're covered.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: Explain a bit more about the add_request issue, which after
some irc chatting with Chris turns out to not be an issue really.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We can use the simpler spinlock form to disable interrupts as we are
always outside of an irq/softirq handler.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Recent BSW VBT has a VBT child device size 37 bytes instead of the 33
bytes our code assumes. This means we fail to parse the VBT and thus
fail to detect eDP ports properly and just register them as DP ports
instead.

Fix it up by using the reported child device size from the VBT instead
of assuming it matches out struct defintions.

The latest spec I have shows that the child device size should be 36
bytes for rev >= 195, however on my BSW the size is actually 37 bytes.
And our current struct definition is 33 bytes.

Feels like the entire VBT parses would need to be rewritten to handle
changes in the layout better, but for now I've decided to do just the
bare minimum to get my eDP port back.

Cc: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

True PPGTT is capable of having a full address space, even if the system
has less allocated memory.

Note that aliasing PPGTT always aliases the GGTT and thus should remain
of the same size.
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This finishes off the dynamic page tables allocations, in the legacy 3
level style that already exists. Most everything has already been setup
to this point, the patch finishes off the enabling by setting the
appropriate function pointers.

In LRC mode, contexts need to know the PDPs when they are populated. With
dynamic page table allocations, these PDPs may not exist yet. Check if
PDPs have been allocated and use the scratch page if they do not exist yet.

Before submission, update the PDPs in the logic ring context as PDPs
have been allocated.

v2: Update aliasing/true ppgtt allocate/teardown/clear functions for
gen 6 & 7.

v3: Rebase.

v4: Remove BUG() from ppgtt_unbind_vma, but keep checking that either
teardown_va_range or clear_range functions exist (Daniel).

v5: Similar to gen6, in init, gen8_ppgtt_clear_range call is only needed
for aliasing ppgtt. Zombie tracking was originally added for teardown
function and is no longer required.

v6: Update err_out case in gen8_alloc_va_range (missed from lastest
rebase).

v7: Rebase after s/page_tables/page_table/.

v8: Updated scratch_pt check after scratch flag was removed in previous
patch.

v9: Note that lrc mode needs to be updated to support init state without
any PDP.

v10: Unmap correct page_table in gen8_alloc_va_range's error case,  clean-up
gen8_aliasing_ppgtt_init (remove duplicated map), and initialize PTs
during page table allocation.

v11: Squashed LRC enabling commit, otherwise LRC mode would be left broken
until it was updated to handle the init case without any PDP.

v12: Do not overallocate new_pts bitmap, make alloc_gen8_temp_bitmaps
static and don't abuse of inline functions. (Mika)

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Like with gen6/7, we can enable bitmap tracking with all the
preallocations to make sure things actually don't blow up.

v2: Rebased to match changes from previous patches.
v3: Without teardown logic, rely on used_pdpes and used_pdes when
freeing page tables.
v4: Rebased after s/page_tables/page_table/.
v5: Rebased after page table generalizations.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When we do dynamic page table allocations for gen8, we'll need to have
more control over how and when we map page tables, similar to gen6.
In particular, DMA mappings for page directories/tables occur at allocation
time.

This patch adds the functionality and calls it at init, which should
have no functional change.

The PDPEs are still a special case for now. We'll need a function for
that in the future as well.

v2: Handle renamed unmap_and_free_page functions.
v3: Updated after teardown_va logic was removed.
v4: Rebase after s/page_tables/page_table/.
v5: No longer allocate all PDPs in GEN8+ systems with less than 4GB of
memory, and update populate_lr_context to handle this new case (proper
tracking will be added later in the patch series).
v6: Assign lrc page directory pointer addresses using a macro. (Mika)

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This will be useful for when we move to 48b addressing, and the PDP isn't
the root of the page table structure.

v2: Rebase after changes for Gen8+ systems with less than 4GB of memory.
v3: Rebase after Mika's code review.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2)
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These values are never quite useful for dynamic allocations of the page
tables. Getting rid of them will help prevent later confusion.

v2: Updated to use unmap_and_free_pd functions.
v3: Updated gen8_ppgtt_free after teardown logic was removed.
v4: Rebase after s/page_tables/page_table/.
v5: Keep allocating all page directories in GEN8+ systems with less
than 4GB of memory. Updated gen6_for_all_pdes.
v6: Prevent (harmless) out of range access in gen6_for_all_pdes.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

One important part of this patch is we now write a scratch page
directory into any unused PDP descriptors. This matters for 2 reasons,
first, we're not allowed to just use 0, or an invalid pointer, and second,
we must wipe out any previous contents from the last context.

The latter point only matters with full PPGTT. The former point only
effect platforms with less than 4GB memory.

v2: Updated commit message to point that we must set unused PDPs to the
scratch page.

v3: Unmap scratch_pd in gen8_ppgtt_free.

v4: Initialize scratch_pd. (Mika)

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Start using gen8_for_each_pde macro to allocate page tables.

v2: teardown_va_range references removed.
v3: Rebase after s/page_tables/page_table/.
v4: Keep setting up page tables for all page directories in systems with
less than 4GB of memory.
v5: Also initialize the page tables. (Mika)
v6: Initialize all page tables, including the extra ones from systems
with less than 4GB of memory. (Mika)

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>