This patch, based on Linaro's Cortex Strings library, adds
an assembly optimized strlen() and strnlen() functions.
Signed-off-by: NZhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch, based on Linaro's Cortex Strings library, adds
an assembly optimized strcmp() and strncmp() functions.
Signed-off-by: NZhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch, based on Linaro's Cortex Strings library, adds
an assembly optimized memcmp() function.
Signed-off-by: NZhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch, based on Linaro's Cortex Strings library, improves
the performance of the assembly optimized memset() function.
Signed-off-by: NZhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch, based on Linaro's Cortex Strings library, improves
the performance of the assembly optimized memmove() function.
Signed-off-by: NZhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch, based on Linaro's Cortex Strings library, improves
the performance of the assembly optimized memcpy() function.
Signed-off-by: NZhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Whilst our defconfig is certainly usable, there are a few extra features
we can enable to make it considerably more useful, particularly if
people are using it for testing:

 - KVM
 - SWAP
 - Hugepages
 - ARMv8 crypto

This patch enables these options in our defconfig. Note that the ordering
has changed slightly, since this is the result of a new savedefconfig
make target.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

If one process calls sys_reboot and that process then stops other
CPUs while those CPUs are within a spin_lock() region we can
potentially encounter a deadlock scenario like below.

CPU 0                   CPU 1
-----                   -----
                        spin_lock(my_lock)
smp_send_stop()
 <send IPI>             handle_IPI()
                         disable_preemption/irqs
                          while(1);
 <PREEMPT>
spin_lock(my_lock) <--- Waits forever

We shouldn't attempt to run any other tasks after we send a stop
IPI to a CPU so disable preemption so that this task runs to
completion. We use local_irq_disable() here for cross-arch
consistency with x86.
Based-on-work-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NArun KS <getarunks@gmail.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch ports most of commit 19ab428f "ARM: 7759/1: decouple CPU
offlining from reboot/shutdown" by Stephen Warren from arch/arm to
arch/arm64.

machine_shutdown() is a hook for kexec. Add a comment saying so, since
it isn't obvious from the function name.

Halt, power-off, and restart have different requirements re: stopping
secondary CPUs than kexec has. The former simply require the secondary
CPUs to be quiesced somehow, whereas kexec requires them to be
completely non-operational, so that no matter where the kexec target
images are written in RAM, they won't influence operation of the
secondary CPUS,which could happen if the CPUs were still executing some
kind of pin loop. To this end, modify machine_halt, power_off, and
restart to call smp_send_stop() directly, rather than calling
machine_shutdown().

In machine_shutdown(), replace the call to smp_send_stop() with a call
to disable_nonboot_cpus(). This completely disables all but one CPU,
thus satisfying the kexec requirements a couple paragraphs above.
Signed-off-by: NArun KS <getarunks@gmail.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Support for arch_irq_work_raise() was missing from
arm64 (a prerequisite for FULL_NOHZ).

This patch is based on the arm32 patch ARM 7872/1.

commit bf18525f
Author: Stephen Boyd <sboyd@codeaurora.org>
Date:   Tue Oct 29 20:32:56 2013 +0100

    ARM: 7872/1: Support arch_irq_work_raise() via self IPIs

    By default, IRQ work is run from the tick interrupt (see
    irq_work_run() in update_process_times()). When we're in full
    NOHZ mode, restarting the tick requires the use of IRQ work and
    if the only place we run IRQ work is in the tick interrupt we
    have an unbreakable cycle. Implement arch_irq_work_raise() via
    self IPIs to break this cycle and get the tick started again.
    Note that we implement this via IPIs which are only available on
    SMP builds. This shouldn't be a problem because full NOHZ is only
    supported on SMP builds anyway.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
    Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLarry Bassel <larry.bassel@linaro.org>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add support for parsing the explicit topology bindings to discover the
topology of the system.

Since it is not currently clear how to map multi-level clusters for the
scheduler all leaf clusters are presented to the scheduler at the same
level. This should be enough to provide good support for current systems.
Signed-off-by: NMark Brown <broonie@linaro.org>
Reviewed-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

As a legacy of the way 32 bit ARM did things the topology code uses a null
topology map by default and then overwrites it by mapping cores with no
information to a cluster by themselves later. In order to make it simpler
to reset things as part of recovering from parse failures in firmware
information directly set this configuration on init. A core will always be
its own sibling so there should be no risk of confusion with firmware
provided information.
Signed-off-by: NMark Brown <broonie@linaro.org>
Reviewed-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Remove unused and deprecated mc_capable() and smt_capable().

Both were added recently by f6e763b9 ("arm64: topology:
Implement basic CPU topology support"). Uses of both were removed
by 8e7fbcbc ("sched: Remove stale power aware scheduling
remnants and dysfunctional knobs").
Signed-off-by: NZi Shen Lim <zlim@broadcom.com>
Signed-off-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This reverts commit bc07c2c6.

While the aim is increased security for --x memory maps, it does not
protect against kernel level reads. Until SECCOMP is implemented for
arm64, revert this patch to avoid giving a false idea of execute-only
mappings.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

FPSIMD register bank context switching and crypto algorithms
optimisations for arm64 from Ard Biesheuvel.

* tag 'for-3.16' of git://git.linaro.org/people/ard.biesheuvel/linux-arm:
  arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions
  arm64: pull in <asm/simd.h> from asm-generic
  arm64/crypto: AES in CCM mode using ARMv8 Crypto Extensions
  arm64/crypto: AES using ARMv8 Crypto Extensions
  arm64/crypto: GHASH secure hash using ARMv8 Crypto Extensions
  arm64/crypto: SHA-224/SHA-256 using ARMv8 Crypto Extensions
  arm64/crypto: SHA-1 using ARMv8 Crypto Extensions
  arm64: add support for kernel mode NEON in interrupt context
  arm64: defer reloading a task's FPSIMD state to userland resume
  arm64: add abstractions for FPSIMD state manipulation
  asm-generic: allow generic unaligned access if the arch supports it

Conflicts:
	arch/arm64/include/asm/thread_info.h

This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes,
both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON.

The Crypto Extensions version can only run on ARMv8 implementations that
have support for these optional extensions.

The plain NEON version is a table based yet time invariant implementation.
All S-box substitutions are performed in parallel, leveraging the wide range
of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can
comfortably hold the entire S-box and still have room to spare for doing the
actual computations.

The key expansion routines were borrowed from aes_generic.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>

This patch adds support for the AES-CCM encryption algorithm for CPUs that
have support for the AES part of the ARM v8 Crypto Extensions.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for the AES symmetric encryption algorithm for CPUs
that have support for the AES part of the ARM v8 Crypto Extensions.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>

This is a port to ARMv8 (Crypto Extensions) of the Intel implementation of the
GHASH Secure Hash (used in the Galois/Counter chaining mode). It relies on the
optional PMULL/PMULL2 instruction (polynomial multiply long, what Intel call
carry-less multiply).
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for the SHA-224 and SHA-256 Secure Hash Algorithms
for CPUs that have support for the SHA-2 part of the ARM v8 Crypto Extensions.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for the SHA-1 Secure Hash Algorithm for CPUs that
have support for the SHA-1 part of the ARM v8 Crypto Extensions.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some kernel files may include both linux/compat.h and asm/compat.h directly
or indirectly. Since both header files contain is_compat_task() under
!CONFIG_COMPAT, compiling them with !CONFIG_COMPAT will eventually fail.
Such files include kernel/auditsc.c, kernel/seccomp.c and init/do_mountfs.c
(do_mountfs.c may read asm/compat.h via asm/ftrace.h once ftrace is
implemented).

So this patch proactively
1) removes is_compat_task() under !CONFIG_COMPAT from asm/compat.h
2) replaces asm/compat.h to linux/compat.h in kernel/*.c,
   but asm/compat.h is still necessary in ptrace.c and process.c because
   they use is_compat_thread().
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This macro, regs_return_value, is used mainly for audit to record system
call's results, but may also be used in test_kprobes.c.
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NRichard Guy Briggs <rgb@redhat.com>
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

As done in arm, this change makes it easy to confirm we invoke syscall
related hooks, including syscall tracepoint, audit and seccomp which would
be implemented later, in correct order. That is, undoing operations in the
opposite order on exit that they were done on entry.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Currently syscall_trace() is called only for ptrace.
With additional TIF_xx flags defined, it is now called in all the cases
of audit, ftrace and seccomp in addition to ptrace.
Acked-by: NRichard Guy Briggs <rgb@redhat.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Since mdscr_el1 is part of the debug register group, it is highly likely
to be trapped by a hypervisor to prevent virtual machines from debugging
(buggering?) each other. Unfortunately, this absolutely destroys our
performance, since we access the register on many of our low-level
fault handling paths to keep track of the various debug state machines.

This patch removes our dependency on mdscr_el1 in the case that debugging
is not being used. More specifically we:

  - Use TIF_SINGLESTEP to indicate that a task is stepping at EL0 and
    avoid disabling step in the MDSCR when we don't need to.
    MDSCR_EL1.SS handling is moved to kernel_entry, when trapping from
    userspace.

  - Ensure debug exceptions are re-enabled on *all* exception entry
    paths, even the debug exception handling path (where we re-enable
    exceptions after invoking the handler). Since we can now rely on
    MDSCR_EL1.SS being cleared by the entry code, exception handlers can
    usually enable debug immediately before enabling interrupts.

  - Remove all debug exception unmasking from ret_to_user and
    el1_preempt, since we will never get here with debug exceptions
    masked.

This results in a slight change to kernel debug behaviour, where we now
step into interrupt handlers and data aborts from EL1 when debugging the
kernel, which is actually a useful thing to do. A side-effect of this is
that it *does* potentially prevent stepping off {break,watch}points when
there is a high-frequency interrupt source (e.g. a timer), so a debugger
would need to use either breakpoints or manually disable interrupts to
get around this issue.

With this patch applied, guest performance is restored under KVM when
debug register accesses are trapped (and we get a measurable performance
increase on the host on Cortex-A57 too).

Cc: Ian Campbell <ian.campbell@citrix.com>
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

In order to ensure ordering and completion of inner-shareable maintenance
instructions (cache and TLB) on AArch64, we can use the -ish suffix to
the dmb and dsb instructions respectively.

This patch updates our low-level cache and tlb maintenance routines to
use the inner-shareable barrier variants where appropriate.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

In order to ensure completion of inner-shareable maintenance instructions
(cache and TLB) on AArch64, we can use the -ish suffix to the dsb
instruction.

This patch relaxes our dsb sy instructions to dsb ish where possible.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

set_cpu_boot_mode_flag is used to identify which exception levels are
encountered across the system by CPUs trying to enter the kernel. The
basic algorithm is: if a CPU is booting at EL2, it will set a flag at
an offset of #4 from __boot_cpu_mode, a cacheline-aligned variable.
Otherwise, a flag is set at an offset of zero into the same cacheline.
This enables us to check that all CPUs booted at the same exception
level.

This cacheline is written with the stage-1 MMU off (that is, via a
strongly-ordered mapping) and will bypass any clean lines in the cache,
leading to potential coherence problems when the variable is later
checked via the normal, cacheable mapping of the kernel image.

This patch reworks the broken flushing code so that we:

  (1) Use a DMB to order the strongly-ordered write of the cacheline
      against the subsequent cache-maintenance operation (by-VA
      operations only hazard against normal, cacheable accesses).

  (2) Use a single dc ivac instruction to invalidate any clean lines
      containing a stale copy of the line after it has been updated.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The recently introduced acquire/release accessors refer to smp_mb()
in the !CONFIG_SMP case. This is confusing when reading the code, so use
barrier() directly when we know we're UP.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Now that all callers of the barrier macros are updated to pass the
mandatory options, update the macros so the option is actually used.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

When calling our low-level barrier macros directly, we can often suffice
with more relaxed behaviour than the default "all accesses, full system"
option.

This patch updates the users of dsb() to specify the option which they
actually require.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The tlb maintainence functions: __cpu_flush_user_tlb_range and
__cpu_flush_kern_tlb_range do not take into consideration the page
granule when looping through the address range, and repeatedly flush
tlb entries for the same page when operating with 64K pages.

This patch re-works the logic s.t. we instead advance the loop by
 1 << (PAGE_SHIFT - 12), so avoid repeating ourselves.

Also the routines have been converted from assembler to static inline
functions to aid with legibility and potential compiler optimisations.

The isb() has been removed from flush_tlb_kernel_range(.) as it is
only needed when changing the execute permission of a mapping. If one
needs to set an area of the kernel as execute/non-execute an isb()
must be inserted after the call to flush_tlb_kernel_range.

Cc: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: NSteve Capper <steve.capper@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Some users of xchg() don't bother using the return value, which results
in a compiler warning like the following (from kgdb):

In file included from linux/arch/arm64/include/asm/atomic.h:27:0,
                 from include/linux/atomic.h:4,
                 from include/linux/spinlock.h:402,
                 from include/linux/seqlock.h:35,
                 from include/linux/time.h:5,
                 from include/uapi/linux/timex.h:56,
                 from include/linux/timex.h:56,
                 from include/linux/sched.h:19,
                 from include/linux/pid_namespace.h:4,
                 from kernel/debug/debug_core.c:30:
kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’:
linux/arch/arm64/include/asm/cmpxchg.h:75:3: warning: value computed is not used [-Wunused-value]
  ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
   ^
linux/arch/arm64/include/asm/atomic.h:132:30: note: in expansion of macro ‘xchg’
 #define atomic_xchg(v, new) (xchg(&((v)->counter), new))

kernel/debug/debug_core.c:504:4: note: in expansion of macro ‘atomic_xchg’
    atomic_xchg(&kgdb_active, cpu);
    ^

This patch makes use of the same trick as we do for cmpxchg, by assigning
the return value to a dummy variable in the xchg() macro itself.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

We have the capability to map 1GB level 1 blocks when using a 4K
granule.

This patch adjusts the create_mapping logic s.t. when mapping physical
memory on boot, we attempt to use a 1GB block if both the VA and PA
start and end are 1GB aligned. This both reduces the levels of lookup
required to resolve a kernel logical address, as well as reduces TLB
pressure on cores that support 1GB TLB entries.
Signed-off-by: NSteve Capper <steve.capper@linaro.org>
Tested-by: NJungseok Lee <jays.lee@samsung.com>
[catalin.marinas@arm.com: s/prot_sect_kernel/PROT_SECT_NORMAL_EXEC/]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

arm64 sets CONFIG_64BIT=y and hence uses the "long counter" atomic64_t
definition from include/linux/types.h.  Make atomic64_read() return "long",
not "long long".
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The primary aim of this patchset is to remove the pgprot_default and
prot_sect_default global variables and rely strictly on predefined
values. The original goal was to be able to run SMP kernels on UP
hardware by not setting the Shareability bit. However, it is unlikely to
see UP ARMv8 hardware and even if we do, the Shareability bit is no
longer assumed to disable cacheable accesses.

A side effect is that the device mappings now have the Shareability
attribute set. The hardware, however, should ignore it since Device
accesses are always Outer Shareable.

Following the removal of the two global variables, there is some PROT_*
macro reshuffling and cleanup, including the __PAGE_* macros (replaced
by PAGE_*).
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>

The ARMv8 architecture allows execute-only user permissions by clearing
the PTE_UXN and PTE_USER bits. The kernel, however, can still access
such page, so execute-only page permission does not protect against
read(2)/write(2) etc. accesses. Systems requiring such protection must
implement/enable features like SECCOMP.

This patch changes the arm64 __P100 and __S100 protection_map[] macros
to the new __PAGE_EXECONLY attributes. A side effect is that
pte_valid_user() no longer triggers for __PAGE_EXECONLY since PTE_USER
isn't set. To work around this, the check is done on the PTE_NG bit via
the pte_valid_ng() macro. VM_READ is also checked now for page faults.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This information is useful for instruction emulators to detect
read/write and access size without having to decode the faulting
instruction. The current patch exports it via sigcontext (struct
esr_context) and is only valid for SIGSEGV and SIGBUS.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>