Previously, drivers supporting vblank interrupt waits would run the interrupt
all the time, or all the time that any 3d client was running, preventing the
CPU from sleeping for long when the system was otherwise idle.  Now, interrupts
are disabled any time that no client is waiting on a vblank event. The new
method uses vblank counters on the chipsets when the interrupts are turned
off, rather than counting interrupts, so that we can continue to present
accurate vblank numbers.

Co-author: Michel Dänzer <michel@tungstengraphics.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

[Patch against drm-next.  Consider this a trial balloon for our new Linux
development model.]

This is a big chunk of code.  Separating it out makes it easier to change
without churn on the main i915_drv.c file (and there will be churn as we
fix bugs and add things like kernel mode setting).  Also makes it easier
to share this file with BSD.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds the support necessary for allowing ACPI backlight control to
work on some newer Intel-based graphics systems. Tested on Thinkpad T61
and HP 2510p hardware.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NDave Airlie <airlied@linux.ie>

Signed-off-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

With the coming of kernel based modesetting and the memory manager stuff,
the everything in one directory approach was getting very ugly and
starting to be unmanageable.

This restructures the drm along the lines of other kernel components.

It creates a drivers/gpu/drm directory and moves the hw drivers into
subdirectores. It moves the includes into an include/drm, and
sets up the unifdef for the userspace headers we should be exporting.
Signed-off-by: NDave Airlie <airlied@redhat.com>

On 9xx chips, bus mastering needs to be enabled at resume time for much of the
chip to function.  With this patch, vblank interrupts will work as expected
on resume, along with other chip functions.   Fixes kernel bugzilla #10844.
Signed-off-by: NJie Luo <clotho67@gmail.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDave Airlie <airlied@redhat.com>

turns out it's important to save/restore AR14 in particular.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This reverts commit ac741ab7.

Okay this looks like wasn't as fully baked as I'd led myself to believe.

Revert for now for further baking.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Other Authors: Michel Dänzer <michel@tungstengraphics.com>
mga: Ian Romanick <idr@us.ibm.com>
via: Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>

This re-works the DRM internals to provide a better interface for drivers
to expose vblank on multiple crtcs.

It also includes work done by Michel on making i915 triple buffering and pageflipping work properly.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Make sure the restoration correctly restores the AR registers by
flipping the ARX register into index mode before doing anything.

Without this, some people have had the text mode restore all green.
Signed-off-by: NJesse Barnes <jesse.barnes@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fix i915 driver to use state for hibernate save avoidance.
Signed-off-by: NDave Airlie <airlied@redhat.com>

In hibernate, we may end up calling the VGA save regs function twice, so we need to make sure it's idempotent.  That means leaving ARX in index mode after the first save operation.  Fixes hibernate on 965.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Failing to preserve the MI_ARB_STATE register was causing FIFO underruns on
the VGA output on my HP 2510p after resume.
Signed-off-by: NDave Airlie <airlied@redhat.com>

On many chipsets, the checks for DPLL enable or VGA mode will prevent the pipeconf regs from being restored, which could result in a blank display or X failing to come back after resume.  So restore them unconditionally along with actually restoring pipe B's palette correctly.
Signed-off-by: NDave Airlie <airlied@redhat.com>

On resume, if the interrupt state isn't restored correctly, we may end
up with a flood of unexpected or ill-timed interrupts, which could cause
the kernel to disable the interrupt or vblank events to happen at the
wrong time.  So save/restore them properly.
Signed-off-by: NDave Airlie <airlied@linux.ie>

This adds new chipset id in drm.
Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add suspend/resume support to the i915 driver.  Moves some of the
initialization into the driver load routine, and fixes up places where we
assumed no dev_private existed in some of the cleanup paths.  This allows
us to suspend/resume properly even if X isn't running.
Signed-off-by: NDave Airlie <airlied@linux.ie>

Signed-off-by: NDave Airlie <airlied@linux.ie>

When the vertical blank interrupt is enabled for both pipes, pipe A is
considered primary and pipe B secondary. When it's only enabled for one pipe,
it's always considered primary for backwards compatibility.
Signed-off-by: NDave Airlie <airlied@linux.ie>

Add support for vblank ioctls to i915 driver

From: Dave Airlie <airlied@linux.ie>
Signed-off-by: NDave Airlie <airlied@linux.ie>

Alan Hourihane wants to set MTRR in the DDX only as otherwise
we get problems with the shared memory chipset.

From: Alan Hourihane <alanh@fairlite.demon.co.uk>
Signed-off-by: NDave Airlie <airlied@linux.ie>

Rename the driver hooks in the DRM to something a little more understandable:
preinit         ->      load
postinit        ->      (removed)
presetup        ->      firstopen
postsetup       ->      (removed)
open_helper     ->      open
prerelease      ->      preclose
free_filp_priv  ->      postclose
pretakedown     ->      lastclose
postcleanup     ->      unload
release         ->      reclaim_buffers_locked
version         ->      (removed)

postinit and version were replaced with generic code in the Linux DRM (drivers
now set their version numbers and description in the driver structure, like on
BSD).  postsetup wasn't used at all.  Fixes the savage hooks for
initializing and tearing down mappings at the right times.  Testing involved at
least starting X, running glxgears, killing glxgears, exiting X, and repeating.

Tested on:      FreeBSD (g200, g400, r200, r128)
                Linux (r200, savage4)

From: Eric Anholt <anholt@freebsd.org>
Signed-off-by: NDave Airlie <airlied@linux.ie>

Finally cleaned up the sparse warnings for the drm.
Signed-off-by: NDave Airlie <airlied@linux.ie>

I've been threatening this for a while, so no point hanging around.
This lindents the DRM code which was always really bad in tabbing department.
I've also fixed some misnamed files in comments and removed some trailing
whitespace.
Signed-off-by: NDave Airlie <airlied@linux.ie>

Added device_is_agp callback to drm_driver.  This function is called by the
platform-specific drm_device_is_agp function.  Added implementation of this
function the the Linux-specific portion of the MGA driver to detect PCI G450
cards.  Added code to the Linux-specific portion of the generic DRM layer to
not initialize AGP infrastructure if the card is not AGP (this matches what
already existed in BSD).

Fix up i810/i830 and i915 drivers to always return AGP as they don't always
report the capability.

Fix the MGA to not report AGP for a card that has an AGP chip behind a PCI
bridge.

From: Ian Romanick, Dave Airlie, Alan Hourihane
Signed-off-by: NDave Airlie <airlied@linux.ie>

This adds compatiblity ioctls for mga/r128 and i915 DRM drivers.

From: Paul Mackerras, David Airlie, Alan Hourihane, Egbert Eich.
Signed-off-by: NDavid Airlie <airlied@linux.ie>

This patch contains the following cleanups:
- make needlessly global functions static
- remove the following unused global functions:
 - drm_fops.c: drm_read
 - i915_dma.c: i915_do_cleanup_pageflip
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDave Airlie <airlied@linux.ie>

From: Alan Hourihane
Signed-off-by: NDavid Airlie <airlied@linux.ie>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!