- 18 5月, 2010 40 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Instead of using the minor number in kernel log messages, use the device node name as returned by the video_device_node_name() function. This makes debug, informational and error messages easier to understand for end users. [mchehab.redhat.com: apply just the tm6000 changes on a separate patch] Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dmitri Belimov 提交于
Add new TV cards of Beholder for autodetect. With my best regards, Dmitry. Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Such code has no space upstream and prevents tm6000 from compiling. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Onr warning is left, since it is there for a purpose: tm6000-core.c:218: warning: ISO C90 forbids mixed declarations and code It indicates a place where a temporary hack were added. Tests are needed to be sure that we can remove it. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Before this patch, we were writing outside vmalloced buffer Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of storing next buf on a temp var, saved over URB processing, restore it using get_next_buf. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
TM6010 uses some different registers for format support. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Maykel Moya 提交于
Signed-off-by: NMaykel Moya <moya@infomed.sld.cu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The new way is causing machine hangups. This one works. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Uses about the same initialization code as defined on usbaudio.c. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
- Remove cx88 specific setups; - Add tm6000 specific start/stop commands; - Do CodingStyle cleanups. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
A previous committed patch hanged image output. This patch corrects this issue. It also warrants that buffer is updated for each frame0+frame1 frame set. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
tm6000 original driver seems to use a delay between two consecutive i2c write operations. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
tm6000 sometimes can't read from i2c, but this is currently required for tuner-xc2028 to work. This patch adds an option to tuner-xc2028 to not rely on i2c reading. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
This requires a little more memory, and some memcpy to work, but the logic is simpler than the previous method. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Chris Pascoe 提交于
Update the descriptions of the USB request types so that they match what we now know they do. Rework the i2c_xfer function so that it is more explicit what sort of I2C transfers it is that the tm6000 can't perform. Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Christopher Pascoe 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michel Ludwig 提交于
Thanks to Mike Krufky for pointed that one out. Also include some minor cleanups. Signed-off-by: NMichel Ludwig <michel.ludwig@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michel Ludwig 提交于
Signed-off-by: NMichel Ludwig <michel.ludwig@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michel Ludwig 提交于
Signed-off-by: NMichel Ludwig <michel.ludwig@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-