Conflicts:
	drivers/net/bnx2x/bnx2x.h

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  DNS: Fix a NULL pointer deref when trying to read an error key [CVE-2011-1076]

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits)
  MAINTAINERS: Add Andy Gospodarek as co-maintainer.
  r8169: disable ASPM
  RxRPC: Fix v1 keys
  AF_RXRPC: Handle receiving ACKALL packets
  cnic: Fix lost interrupt on bnx2x
  cnic: Prevent status block race conditions with hardware
  net: dcbnl: check correct ops in dcbnl_ieee_set()
  e1000e: disable broken PHY wakeup for ICH10 LOMs, use MAC wakeup instead
  igb: fix sparse warning
  e1000: fix sparse warning
  netfilter: nf_log: avoid oops in (un)bind with invalid nfproto values
  dccp: fix oops on Reset after close
  ipvs: fix dst_lock locking on dest update
  davinci_emac: Add Carrier Link OK check in Davinci RX Handler
  bnx2x: update driver version to 1.62.00-6
  bnx2x: properly calculate lro_mss
  bnx2x: perform statistics "action" before state transition.
  bnx2x: properly configure coefficients for MinBW algorithm (NPAR mode).
  bnx2x: Fix ethtool -t link test for MF (non-pmf) devices.
  bnx2x: Fix nvram test for single port devices.
  ...

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: kill loop_mutex
  blktrace: Remove blk_fill_rwbs_rq.
  block: blk-flush shouldn't call directly into q->request_fn() __blk_run_queue()
  block: add @force_kblockd to __blk_run_queue()
  block: fix kernel-doc format for blkdev_issue_zeroout
  blk-throttle: Do not use kblockd workqueue for throtl work

* 'i_nlink' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  hfs: fix rename() over non-empty directory
  udf: fix i_nlink limit
  fix reiserfs mkdir() breakage
  exofs: i_nlink races in rename()
  nilfs2: i_nlink races in rename()
  minix: i_nlink races in rename()
  ufs: i_nlink races in rename()
  sysv: i_nlink races in rename()

When a DNS resolver key is instantiated with an error indication, attempts to
read that key will result in an oops because user_read() is expecting there to
be a payload - and there isn't one [CVE-2011-1076].

Give the DNS resolver key its own read handler that returns the error cached in
key->type_data.x[0] as an error rather than crashing.

Also make the kenter() at the beginning of dns_resolver_instantiate() limit the
amount of data it prints, since the data is not necessarily NUL-terminated.

The buggy code was added in:

	commit 4a2d7892
	Author: Wang Lei <wang840925@gmail.com>
	Date:   Wed Aug 11 09:37:58 2010 +0100
	Subject: DNS: If the DNS server returns an error, allow that to be cached [ver #2]

This can trivially be reproduced by any user with the following program
compiled with -lkeyutils:

	#include <stdlib.h>
	#include <keyutils.h>
	#include <err.h>
	static char payload[] = "#dnserror=6";
	int main()
	{
		key_serial_t key;
		key = add_key("dns_resolver", "a", payload, sizeof(payload),
			      KEY_SPEC_SESSION_KEYRING);
		if (key == -1)
			err(1, "add_key");
		if (keyctl_read(key, NULL, 0) == -1)
			err(1, "read_key");
		return 0;
	}

What should happen is that keyctl_read() reports error 6 (ENXIO) to the user:

	dns-break: read_key: No such device or address

but instead the kernel oopses.

This cannot be reproduced with the 'keyutils add' or 'keyutils padd' commands
as both of those cut the data down below the NUL termination that must be
included in the data.  Without this dns_resolver_instantiate() will return
-EINVAL and the key will not be instantiated such that it can be read.

The oops looks like:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: [<ffffffff811b99f7>] user_read+0x4f/0x8f
PGD 3bdf8067 PUD 385b9067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:19.0/irq
CPU 0
Modules linked in:

Pid: 2150, comm: dns-break Not tainted 2.6.38-rc7-cachefs+ #468                  /DG965RY
RIP: 0010:[<ffffffff811b99f7>]  [<ffffffff811b99f7>] user_read+0x4f/0x8f
RSP: 0018:ffff88003bf47f08  EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff88003b5ea378 RCX: ffffffff81972368
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003b5ea378
RBP: ffff88003bf47f28 R08: ffff88003be56620 R09: 0000000000000000
R10: 0000000000000395 R11: 0000000000000002 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffffffffa1
FS:  00007feab5751700(0000) GS:ffff88003e000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000003de40000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process dns-break (pid: 2150, threadinfo ffff88003bf46000, task ffff88003be56090)
Stack:
 ffff88003b5ea378 ffff88003b5ea3a0 0000000000000000 0000000000000000
 ffff88003bf47f68 ffffffff811b708e ffff88003c442bc8 0000000000000000
 00000000004005a0 00007fffba368060 0000000000000000 0000000000000000
Call Trace:
 [<ffffffff811b708e>] keyctl_read_key+0xac/0xcf
 [<ffffffff811b7c07>] sys_keyctl+0x75/0xb6
 [<ffffffff81001f7b>] system_call_fastpath+0x16/0x1b
Code: 75 1f 48 83 7b 28 00 75 18 c6 05 58 2b fb 00 01 be bb 00 00 00 48 c7 c7 76 1c 75 81 e8 13 c2 e9 ff 4c 8b b3 e0 00 00 00 4d 85 ed <41> 0f b7 5e 10 74 2d 4d 85 e4 74 28 e8 98 79 ee ff 49 39 dd 48
RIP  [<ffffffff811b99f7>] user_read+0x4f/0x8f
 RSP <ffff88003bf47f08>
CR2: 0000000000000010
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NJeff Layton <jlayton@redhat.com>
cc: Wang Lei <wang840925@gmail.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Netlink message processing in the kernel is synchronous these days,
capabilities can be checked directly in security_netlink_recv() from
the current process.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Reviewed-by: NJames Morris <jmorris@namei.org>
[chrisw: update to include pohmelfs and uvesafb]
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add pr_fmt.

Removed trailing "\n" from version,
add back via pr_info("%s\n", version);
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Acked-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a bit more data to the output.
Convert string speeds to integer.
Object size reduced a tiny bit.
$ size drivers/net/mii.o*
   text	   data	    bss	    dec	    hex	filename
   4155	     56	   1000	   5211	   145b	drivers/net/mii.o.new
   4184	     56	   1000	   5240	   1478	drivers/net/mii.o.old
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the current logging styles.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Neatening and standardization to the current logging mechanisms.
Miscellaneous speen/speed typo correction.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As it isn't necessary nor really useful any longer.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extend be_alloc_pages() with a gfp parameter, so that we use GFP_KERNEL
allocations instead of GFP_ATOMIC when not running in softirq context.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-by: NAjit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: zero proper structure size for geometry calls

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix regression that i-flag is not set on changeless checkpoints

Use the current logging forms with pr_fmt.
Convert DBG macro to tun_debug, use netdev_printk as well.
Add printf verification when TUN_DEBUG not defined.
Miscellaneous comment typo fix.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

FTMAC100 Ethernet Media Access Controller supports 10/100 Mbps and
MII.  This driver has been working on some ARM/NDS32 SoC's including
Faraday A320 and Andes AG101.
Signed-off-by: NPo-Yu Chuang <ratbert@faraday-tech.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For some time is known that ASPM is causing troubles on r8169, i.e. make
device randomly stop working without any errors in dmesg.

Currently Tomi Leppikangas reports that system with r8169 device hangs
with MCE errors when ASPM is enabled:
https://bugzilla.redhat.com/show_bug.cgi?id=642861#c4

Lets disable ASPM for r8169 devices at all, to avoid problems with
r8169 PCIe devices at least for some users.
Reported-by: NTomi Leppikangas <tomi.leppikangas@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reported-by: NStephen Hemminger <shemminger@vyatta.com>
Reported-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because of various alignements [SLUB / qdisc], we use 512 bytes of
memory for one {p|b}fifo qdisc, instead of 256 bytes on 64bit arches and
192 bytes on 32bit ones.

Move the "u32 limit" inside "struct Qdisc" (no impact on other qdiscs)

Change qdisc_alloc(), first trying a regular allocation before an
oversized one.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Netlink message processing in the kernel is synchronous these days, the
session information can be collected when needed.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As reported by Eric:

[11483.697233] IP: [<c12b0638>] dst_release+0x18/0x60
 ...
[11483.697741] Call Trace:
[11483.697764]  [<c12fc9d2>] udp_sendmsg+0x282/0x6e0
[11483.697790]  [<c12a1c01>] ? memcpy_toiovec+0x51/0x70
[11483.697818]  [<c12dbd90>] ? ip_generic_getfrag+0x0/0xb0

The pointer passed to dst_release() is -EINVAL, that's because
we leave an error pointer in the local variable "rt" by accident.

NULL it out to fix the bug.
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Following steps lead to deadlock in kernel:

dd if=/dev/zero of=img bs=512 count=1000
losetup -f img
mkfs.ext2 /dev/loop0
mount -t ext2 -o loop /dev/loop0 mnt
umount mnt/

Stacktrace:
[<c102ec04>] irq_exit+0x36/0x59
[<c101502c>] smp_apic_timer_interrupt+0x6b/0x75
[<c127f639>] apic_timer_interrupt+0x31/0x38
[<c101df88>] mutex_spin_on_owner+0x54/0x5b
[<fe2250e9>] lo_release+0x12/0x67 [loop]
[<c10c4eae>] __blkdev_put+0x7c/0x10c
[<c10a4da5>] fput+0xd5/0x1aa
[<fe2250cf>] loop_clr_fd+0x1a9/0x1b1 [loop]
[<fe225110>] lo_release+0x39/0x67 [loop]
[<c10c4eae>] __blkdev_put+0x7c/0x10c
[<c10a59d9>] deactivate_locked_super+0x17/0x36
[<c10b6f37>] sys_umount+0x27e/0x2a5
[<c10b6f69>] sys_oldumount+0xb/0xe
[<c1002897>] sysenter_do_call+0x12/0x26
[<ffffffff>] 0xffffffff

Regression since 2a48fc0a, which introduced the private
loop_mutex as part of the BKL removal process.

As per [1], the mutex can be safely removed.

[1] http://www.gossamer-threads.com/lists/linux/kernel/1341930

Addresses: https://bugzilla.novell.com/show_bug.cgi?id=669394
Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=29172Signed-off-by: NPetr Uzel <petr.uzel@suse.cz>
Cc: stable@kernel.org
Reviewed-by: NNikanth Karthikesan <knikanth@suse.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

If we enable trace events to trace block actions, We use
blk_fill_rwbs_rq to analyze the corresponding actions
in request's cmd_flags, but we only choose the minor 2 bits
from it, so most of other flags(e.g, REQ_SYNC) are missing.
For example, with a sync write we get:
write_test-2409  [001]   160.013869: block_rq_insert: 3,64 W 0 () 258135 + =
8 [write_test]

Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and
blk_fill_rwbs_rq isn't needed any more.

With this patch, after a sync write we get:
write_test-2417  [000]   226.603878: block_rq_insert: 3,64 WS 0 () 258135 +=
 8 [write_test]
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Acked-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Updating the copyrights for 2011 as well as make the ixgbe_copyright string
a constant.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The X540 devices grabs semaphores differently than 82599 and 82598
devices do.  They do however also grab them in allot of the same
functions.  So I'm adding a new MAC operation function pointer to
allow us to use the correct function based on our MAC type.  I'm also
changing all the semaphore calls to use this new function pointer.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Clean up commented out include file and use #define instead of hard coded
value for number of RAR entries.
Signed-off-by: NGreg Rose <gregory.v.rose@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The I2C interface was not being correctly locked down per port.  As such
this can lead to race conditions that can cause issues.  This patch cleans
up the handling to make certain we are not experiencing racy I2C access.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

We were reading the address after it had been initialized and this results
in the permanent address on the system being changed.  This change corrects
that by storing the address before we re-initialize it.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch contains a number of whitespace and formatting cleanups.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch specifically checks for 100 Full link speed instead of
assuming we are linked at 100 if not linked at 10G and 1G.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This change removes the unused code that was setting up the uc_addr_list.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This change modifies the ixgbe drivers so that it will not drop the
multicast filters while updating them.  Instead it uses an intermediate
table to store the filter and then writes that filter to the hardware.

Based on original patch from Dave Boutcher <daveboutcher@gmail.com>
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Reported-by: NDave Boutcher <daveboutcher@gmail.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The X540 PHY reset pointer isn't currently used which is a good thing as it
wouldn't work as implemented.  On top of that the X540 firmware is written
with the assumption that is does not need to be reset for proper
initialization so it's not needed.  I'm just assigning the pointer at NULL
as the current implementation is rather misleading.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This change makes it so that out of bounds requests to these calls will
now return IXGBE_ERR_INVALID_ARGUMENT instead of returning 0.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fills in the values for bus speed and width of the
ixgbe_bus_speed and ixgbe_bus_width enums.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Some PHYs require that we poll the reset bit and wait for it to clear
before continuing initialization.  As such we should add this check to the
end of the ixgbe_reset_phy_generic routine.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>