- 10 9月, 2016 1 次提交
-
-
由 Takashi Iwai 提交于
Realtek codec driver expects an implicit rule where either the codec SSID or the pincfg NID 0x1d contains the some information encoded in some bits. One of the expected information is there is the availability of PC beep, and the driver doesn't build up the PC beep control if this is *supposed* to be disabled there. Meanwhile, Lenovo doesn't seem to follow this requirement (yes it's non-standard after all), and the BIOS sets just the normal SSID and the pincfg values. This resulted in the lack of PC beep on a few machines, purely with a lucky or unlucky number. It didn't bother most people, but some people still demand the PC beep, as found in bug reports. This patch just adds the fixup chain to Lenovo machines to skip the SKU checks. Then the beep control will show up in the mixer, and user can still decide to enable / disable it via the standard mixer interface. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=156311Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 9月, 2016 1 次提交
-
-
由 Masahiro Yamada 提交于
Remove unneeded variables and assignments. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 9月, 2016 1 次提交
-
-
由 Jeeja KP 提交于
When the stream is in suspended state some applications wait on "Stream Pipe Error" in response to snd_pcm_avail call to resume the stream. In the current implementation snd_pcm_avail() returns zero when the stream is in suspended state. This causes application to enter in infinite loop for frames to be available. "Stream pipe Error" code is getting returned for read/write call when the stream is in suspended state. Similarly update snd_pcm_avail to return -ESTRPIPE. Signed-off-by: NJeeja KP <jeeja.kp@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 9月, 2016 6 次提交
-
-
由 Julia Lawall 提交于
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Julia Lawall 提交于
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Julia Lawall 提交于
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Julia Lawall 提交于
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Julia Lawall 提交于
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Julia Lawall 提交于
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 9月, 2016 1 次提交
-
-
由 Colin Ian King 提交于
Trivial fix to typos dev_dbg messages and comment. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 8月, 2016 1 次提交
-
-
由 Takashi Sakamoto 提交于
Currently, automatic variable of 'union ioctl_arg' type is initialized by designated initialization. Although, the actual effect is interpretation of early element of int type and initialization of 'int pversion'. Therefore the first field corresponding to int type is initialized to zero. This is against my expectation to initialize whole fields. This commit uses memset() to initialize the variable, instead of designated initialization. Fixes: 04a56dd8 ('ALSA: seq: change ioctl command operation to get data in kernel space') Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 8月, 2016 1 次提交
-
-
由 Aaro Koskinen 提交于
Enable sound on PowerBook G4 12". Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 8月, 2016 2 次提交
-
-
由 Takashi Sakamoto 提交于
The below models were developed with a cooperation by Yamaha and Terratec. - Yamaha GO 44/Terratec PHASE 24 FW - Yamaha GO 46/Terratec PHASE X24 FW They have the same configurations, thus it's better to unify corresponding codes. This commit merges them to reduce the amount of maintained codes. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
Once Yamaha and Terratec cooperated to develop some audio and music units on IEEE 1394 bus. On these models, the same embedded board is used, and similar configurations are also applied. This commit renames file for Yamaha's configuration so that it's for both of Yamaha and Terratec. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 8月, 2016 10 次提交
-
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in dev_warn message. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Markus Elfring 提交于
Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Acked-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Shawn Lin 提交于
kmalloc already print similar error once failing to alloc enough memory, so let's remove this dump here. Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel Mack 提交于
Users of devices affected by the Tenor feedback data error report buffer underruns, even with the +/- 0x1.0000 quirk applied. Compensating the error with 0xf000 instead seems to reliably fix that issue. See https://sourceforge.net/p/alsa/mailman/message/35230259/Reported-and-tested-by: NNorman Nolte <norman.nolte@gmx.net> Reported-and-tested-by: NThomas Gresens <T.Gresens@intershop.de> Signed-off-by: NDaniel Mack <daniel@zonque.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel Mack 提交于
The quirk seems to be necessary not only for TEAC UD-H01 devices, but to more that are based on the Tenor 8802TL chipset. Devices built by T+A are affected too, and they apparently all use the same USB PID:PID. Extend the quirky handling for that device as well, and rename the quirks flag. Reported-and-tested-by: NThomas Gresens <T.Gresens@intershop.de> Signed-off-by: NDaniel Mack <daniel@zonque.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel Mack 提交于
That's a quirk, after all, so move it where to all the other quirks live. Signed-off-by: NDaniel Mack <daniel@zonque.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
Former commits change existent functions so that they don't handle data in kernel space. Copying from/to userspace is done outside of the functions, thus no need to change address limit of running task. This commit obsoletes get_fs()/set_fs() and applies corresponding changes. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
In previous commit, a new table for functions with data in kernel space is added to replace current table. This commit changes existent functions to fit the table. These functions are added to the new table and removed from the old table. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
ALSA sequencer is designed with two types of clients; application and kernel. Operations for each ioctl command should handle data in both of user space and kernel space, while current implementation just allows them to handle data in user space. Data in kernel space is handled with change of address limit of running tasks. This commit adds a new table to map ioctl commands to corresponding functions. The functions get data in kernel space. Helper functions to operate kernel and application clients seek entries from the table. Especially, the helper function for application is responsible for coping from user space to kernel space or vise versa. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
This kernel API is used by kernel implementation. Currently, it's used for kernel clients of ALSA sequencer, while it can be used for application clients. The difference is just on address spaces of argument. In short, this kernel API can be available for application client with data in kernel space. This commit adds a document about this. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 8月, 2016 1 次提交
-
-
由 Wolfram Sang 提交于
kmalloc will print enough information in case of failure. Signed-off-by: NWolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 8月, 2016 8 次提交
-
-
由 Takashi Iwai 提交于
-
由 Guneshwor Singh 提交于
The HDA controller from SKL onwards support additional timestamp reporting of the link time. The link time is read from HW registers and converted to audio values. Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: NHardik T Shah <hardik.t.shah@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Guneshwor Singh 提交于
Skylake onwards HDA controller supports new capabilities like Global Time Stamping (GTS) capability. So add support to parse these new capabilities. Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: NHardik T Shah <hardik.t.shah@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vinod Koul 提交于
Remove the unused one as we have moved it up to hdac core. Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vinod Koul 提交于
Now that we have the bus parse capabilities moved to core, we need to convert users. The SKL driver and HDA extended lib needs to converted in single patch, otherwise we regress on the functionality. Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vinod Koul 提交于
HDA capability introduced recently are move to hdac core so that it can be used by legacy driver as well. Also move the capability pointers up to hdac_bus object. Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
The ELP HD USB Camera (05a3:9420) needs this quirk for suppressing the unsupported sample rate inquiry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481 Cc: <stable@vger.kernel.org> Signed-off-by: NVittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Piotr Karasinski 提交于
VF0610 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x82". This patch adds the USB ID (0x041E:4080) to snd_usb_get_sample_rate_quirk() list. Signed-off-by: NPiotr Karasinski <peter.karasinski@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 8月, 2016 7 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull more block fixes from Jens Axboe: "As mentioned in the pull the other day, a few more fixes for this round, all related to the bio op changes in this series. Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I wanted to do that change right after or right before -rc1, so that risk of conflict was reduced. I just rebased the series on top of current master, and no new ->bi_rw usage has snuck in" * 'for-linus' of git://git.kernel.dk/linux-block: block: rename bio bi_rw to bi_opf target: iblock_execute_sync_cache() should use bio_set_op_attrs() mm: make __swap_writepage() use bio_set_op_attrs() block/mm: make bdev_ops->rw_page() take a bool for read/write
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm zpos property support from Dave Airlie: "This tree was waiting on some media stuff I hadn't had time to get a stable branchpoint off, so I just waited until it was all in your tree first. It's been around a bit on the list and shouldn't affect anything outside adding the generic API and moving some ARM drivers to using it" * tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property
-
由 Jens Axboe 提交于
Since commit 63a4cc24, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Jens Axboe 提交于
The original commit missed this function, it needs to mark it a write flush. Cc: Mike Christie <mchristi@redhat.com> Fixes: e742fc32 ("target: use bio op accessors") Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Jens Axboe 提交于
Cleaner than manipulating bio->bi_rw flags directly. Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Jens Axboe 提交于
Commit abf54548 changed it from an 'rw' flags type to the newer ops based interface, but now we're effectively leaking some bdev internals to the rest of the kernel. Since we only care about whether it's a read or a write at that level, just pass in a bool 'is_write' parameter instead. Then we can also move op_is_write() and friends back under CONFIG_BLOCK protection. Reviewed-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-