- 17 9月, 2006 7 次提交
-
-
由 Frank Pavlic 提交于
[PATCH 7/9] s390: qeth driver fixes [4/6] From: Frank Pavlic <fpavlic@de.ibm.com> - fix kernel crash due to race, set card->state to SOFTSETUP after card and card->dev are initialized properly. - remove CONFIG_QETH_PERF_STATS, use sysfs attribute instead, as we want to have the ability to turn on/off the statistics at runtime. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Frank Pavlic 提交于
[PATCH 6/9] s390: qeth driver fixes [3/6] From: Frank Pavlic <fpavlic@de.ibm.com> fixed kernel panic caused by qeth driver: Using a bonding device qeth driver will realloc headroom for every skb coming from the bond device. Once this happens qeth frees the original skb and set the skb pointer to the new realloced skb. Under heavy transmit workload (e.g.UDP streams) through bond network device the qdio output queue might get full. In this case we return with EBUSY from qeth_send_packet. Returning to qeth_hard_start_xmit routine the skb address on the stack still points to the old address, which has been freed before. Returning from qeth_hard_start_xmit with EBUSY results in requeuing the skb. In this case it corrupts the qdisc queue and results in kernel panic. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Frank Pavlic 提交于
[PATCH 5/9] s390: qeth driver fixes [2/6] From: Frank Pavlic <fpavlic@de.ibm.com> - fixed error handling in create_device_attributes - fixed some minor bugs in IPv4 and IPv6 address checking Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Frank Pavlic 提交于
[PATCH 4/9] s390: qeth driver fixes [1/6] From: Frank Pavlic <fpavlic@de.ibm.com> - Drop incoming packets with vlan_tag set if card->vlangrp is not set. - use always vlan_hwaccel_rx to pass vlan frames to the stack. - fix recovery problem. Device was recovered properly but still not working. netif_carrier_on call right before recovery start fixes it. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Frank Pavlic 提交于
[PATCH 3/9] s390: Makefile cleanup From: Frank Pavlic <fpavlic@de.ibm.com> remove CONFIG_MPC from Makefile which was introduced accidently in the past. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Frank Pavlic 提交于
[PATCH 2/9] s390: netiucv driver fixes From: Frank Pavlic <fpavlic@de.ibm.com> - missing lock initialization added - avoid duplicate iucv-interfaces to the same peer - rw-lock added for manipulating the list of defined iucv connections Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Frank Pavlic 提交于
Hi Jeff, this is a RESEND of the nine s390 network driver patches. I finally found that my kmail corrupted almost every patch I sent the last time. Please apply these 9 patches and forget about my first attempt! Sorry for the delay, I had some fights with sendmail, IMAP and mutt configuration. Frank [RESEND PATCH 1/9] s390: minor s390 network driver fixes From: Frank Pavlic <fpavlic@de.ibm.com> - iucv driver: use do { } while (0) constructs instead of empty defines to avoid compile bugs. - ctc driver: missing lock initialization added - lcs driver: BUG_ON usage was removed accidently with the last lcs patch. Put them back in place. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 14 9月, 2006 1 次提交
-
-
由 Dale Farnsworth 提交于
Fix a missing call to dma_unmap_single() in the receive path. Without this call, errors have been observed on non-cache-coherent systems. Signed-off-by Dale Farnsworth <dale@farnsworth.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 13 9月, 2006 8 次提交
-
-
由 Jeff Garzik 提交于
-
由 Linus Torvalds 提交于
One last time..
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current由 Linus Torvalds 提交于
* 'audit.b29' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] sparc64 audit syscall classes hookup [PATCH] syscall class hookup for all normal targets
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix CIFS readdir access denied when SE Linux enabled
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (4608c): Fix I2C dependencies for saa7146 modules V4L/DVB (4608b): i2c deps fix on DVB V4L/DVB (4605): Fixes an issue with V4L1 and make headers-install V4L/DVB (4520): Fix an error when loading bttv driver on PV M4900. V4L/DVB (4511): Restore tuner_ymec_tvf66t5_b_dff_pal_ranges[] to fix UHF switch functionality V4L/DVB (4494a): Fix compilation when V4L1 support is not present
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: Fix unload oops and memory leak in yealink driver usbserial: Reference leak
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Add a sane pm_power_off implementation. sh64: Use generic BUG_ON()/WARN_ON(). sh64: Trivial build fixes. sh64: Drop deprecated ISA tuning for legacy toolchains.
-
git://oss.sgi.com:8090/xfs/xfs-2.6由 Linus Torvalds 提交于
* git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Fix a bad pointer dereference in the quota statvfs handling. [XFS] Fix xfs_splice_write() so appended data gets to disk. [XFS] Fix ABBA deadlock between i_mutex and iolock. Avoid calling [XFS] Prevent free space oversubscription and xfssyncd looping.
-
- 12 9月, 2006 19 次提交
-
-
由 Auke Kok 提交于
Commit 581d708e (oct. 5 2005) introduced partial Multiqueue support for e1000 which broke macro smartness in setting up head/tail registers for 82542 rev3 chipsets, making these adapters completely non-working since 2.6.15. This commit sets the proper head and tail registers for read and write descriptor rings. Ths fix was tested on an 82542 rev3 NIC and newer NICs. Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
由 Henk Vergonet 提交于
This patch fixes a memory leak and a kernel oops when trying to unload the driver, due to an unbalanced cleanup. Thanks Ivar Jensen for spotting my mistake. Signed-off-by: NHenk Vergonet <henk.vergonet@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthias Urlichs 提交于
A sufficiently-large number of USB serial devices causes a reference leak when /proc/tty/drivers/usbserial is read. Signed-Off-By: NMatthias Urlichs <smurf@smurf.noris.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Al Viro 提交于
... that should do it for all targets; the only remaining issues are mips (currently treated as non-biarch) and handling of other OS emulations (OSF/SunOS/Solaris/???). The latter would need to be assigned new AUDIT_ARCH_... ABI numbers anyway... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Take default arch/*/kernel/audit.c to lib/, have those with special needs (== biarch) define AUDIT_ARCH in their Kconfig. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Paul Mundt 提交于
sh64 wasn't providing a sensible pm_power_off(), add one, and just wrap it to machine_power_off, which already does the right thing. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
sh64 doesn't need to do anything special for BUG_ON() or WARN_ON(), use the generic versions. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
While we've been sorting out the toolchain fiasco, some of the code has suffered a bit of bitrot. Building with GCC4 also brings up some more build warnings. Trivial fixes for both issues. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
The original sh64 toolchains required that we tune the ISA level accordingly to not have head.S/entry.S blow up. With current toolchains, this is no longer the case, and the syntax magically changed as well, causing all current toolchains to die a horrible death. Incidentally, code generation in other parts of the kernel is now significantly complex enough that none of the older toolchains make it very far these days, so there's not even any point in preserving legacy compatability via as-option. This fixes a long-standing issue, as noted here: http://lkml.org/lkml/2005/1/5/223 Though at the time the current toolchains were too broken to make adjusting the tuning worthwhile. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Ulrich Kunitz 提交于
Caused by a documentation issue I mixed up fields of the zd_status structure. This patch fixes it and improves also the average computation, which is now using only measurements of packets sent by the access point. Signed-off-by: NUlrich Kunitz <kune@deine-taler.de> Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current由 Linus Torvalds 提交于
* 'audit.b28' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] audit: AUDIT_PERM support [PATCH] audit: more syscall classes added [PATCH] syscall classes hookup for ppc and s390 [PATCH] update audit rule change messages [PATCH] sanity check audit_buffer [PATCH] fix ppid bug in 2.6.18 kernel
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: usbtouchscreen: fix ITM data reading USB: New device ID for ftdi_sio usb serial driver USB: Support for USB20SVGA-WH & USB20SVGA-DG USB: hid-core.c: fix duplicate USB_DEVICE_ID_GTCO_404
-
由 Al Viro 提交于
add support for AUDIT_PERM predicate Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Amy Griffis 提交于
Make the audit message for implicit rule removal more informative. Make the rule update message consistent with other messages. Signed-off-by: NAmy Griffis <amy.griffis@hp.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Amy Griffis 提交于
Add sanity checks for NULL audit_buffer consistent with other audit_log* routines. Signed-off-by: NAmy Griffis <amy.griffis@hp.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Steve Grubb 提交于
Hello, During some troubleshooting, I found that ppid was accidentally omitted from the legacy rule section. This resulted in EINVAL for any rule with ppid sent with AUDIT_ADD. Signed-off-by: NSteve Grubb <sgrubb@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 9月, 2006 5 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] Always use a sector size of 512 bytes [MMC] Cleanup 385e3227 [ARM] 3751/1: i.MX/MX1 SD/MMC use 512 bytes request for SCR read [MMC] Fix SD timeout calculation [MMC] constify mmc_host_ops
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3778/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [simtec] [ARM] 3783/1: S3C2412: fix IRQ_EINT0 to IRQ_EINT3 handling [ARM] 3779/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [left] [ARM] 3777/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [regs-*.h] [ARM] 3776/1: S3C24XX: remove changelogs from include/asm-arm/arch-s3c2410 [ARM] 3775/1: S3C24XX: do not add same sysdev_driver to two classes [ARM] 3774/1: S3C24XX: SMDK2413 has two machine IDs [ARM] 3773/1: Add the HWCAP_VFP bit for the ARM926 CPUs [ARM] 3772/1: Fix compilation error in mach-ixp4xx/nslu2* [ARM] 3767/1: S3C24XX: remove changelog comments from arch/arm/mach-s3c2410 [ARM] 3766/1: Fix typo in ARM _raw_read_trylock
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] Fix dm9000 release_resource
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] ata_piix: add map 01b for ICH7M [libata] sata_mv: errata check buglet fix
-
由 Alan Cox 提交于
There are two changes here. The first reverses the broken PCI_DEVICE conversion back to the old format. The second adds a missing PCI ID so you can actually boot 2.6.18 on 2 month old VIA motherboards (right now only 2.6.18-mm works). CC'd to Jeff to check the PCI ident but its a) in several distro kernels and b) in 2.6.18-mm [twice ??] Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-