- 26 2月, 2016 2 次提交
-
-
由 Krzysztof Adamski 提交于
APB0 is bearly mentioned in H3 User Manual and it is only setup in the Allwinners kernel dump for CIR. I have verified experimentally that the gate for R_PIO exists and works, though. There are probably other gates there but I don't know their order right now and I don't have access to their peripherals on my board to test them. After some experiments and reviewing how this is organized on other sunxi SoCs, I couldn't actually find any way to disable clocks for R_PIO and they are working properly without doing anything so I assume they are connected straight to the 24Mhz oscillator for now. Signed-off-by: NKrzysztof Adamski <k@japko.eu> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Jelle de Jong 提交于
The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet ports, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n. Signed-off-by: NJelle de Jong <jelledejong@powercraft.nl> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 22 2月, 2016 1 次提交
-
-
由 Peter Korsgaard 提交于
Enable the OTG USB controller on the A7HD. Signed-off-by: NPeter Korsgaard <peter@korsgaard.com> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 16 2月, 2016 3 次提交
-
-
由 Marcus Cooper 提交于
Enable the otg/drc usb controller on the MK802. Signed-off-by: NMarcus Cooper <codekipper@gmail.com> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Chen-Yu Tsai 提交于
A23/A33 Q8 tablets have an X-Powers AXP223 PMIC connected via RSB. Its regulators provide power to various parts of the SoC and the board. Also add lcd regulator supply for simplefb and update the existing vmmc-supply for mmc0. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Chen-Yu Tsai 提交于
This board has a X-Powers AXP223 PMIC connected via RSB. Its regulators provide power to various parts of the SoC and the board. Also update the regulator supply phandles. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 10 2月, 2016 2 次提交
-
-
由 Marcus Cooper 提交于
Enable the otg/drc usb controller on the Olimex A20 EVB. Signed-off-by: NMarcus Cooper <codekipper@gmail.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: NHans de Goede <hdegoede@redhat.com>
-
由 Marcus Cooper 提交于
Enable the otg/drc usb controller on the MK808C. Signed-off-by: NMarcus Cooper <codekipper@gmail.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: NHans de Goede <hdegoede@redhat.com>
-
- 09 2月, 2016 1 次提交
-
-
由 Krzysztof Adamski 提交于
pinctrl-sunxi uses 3 cells to describe interrupt, not 2. It's bank number, pin number and flags. Signed-off-by: NKrzysztof Adamski <k@japko.eu> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 04 2月, 2016 1 次提交
-
-
由 Chen-Yu Tsai 提交于
The A83T does not have a 32.768 kHz low speed oscillator, either as an external crystal or input. It has a 16 MHz RC-based (inaccurate) internal oscillator, which is then divided by 512 for a clock close to 32 kHz. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NVishnu Patekar <vishnupatekar0510@gmail.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 02 2月, 2016 1 次提交
-
-
由 Chen-Yu Tsai 提交于
i2c3 and uart4 are available on the GPIO header. Though these pins only have this one special function, the user may choose to use them as GPIOs instead. Since our policy is not to choose what function to present on the GPIO headers of development boards, remove them. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 27 1月, 2016 3 次提交
-
-
由 Marcus Cooper 提交于
Convert the Itead Iteaduino A10 to use the new common itead core dtsi. Signed-off-by: NMarcus Cooper <codekipper@gmail.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Marcus Cooper 提交于
The Itead Ibox is a multi board device based on the Allwinner A20 SoC. It contains the A20 Itead Core module and a base board for the external interfaces. The core module comes with 4GB NAND and 1GB DDR RAM. The base board to which the core board is connected provides 3 USB 2.0 Host ports, 1 USB 2.0 OTG, 1 uSD slot, 10/100 Ethernet port, HDMI, IR receiver, SPDIF and a 32-pin GPIO header. This header expands the features of core board by exposing the VGA pins, audio In/Out pins, SATA, SPI, I2C, UARTS, USB-OTG and power. Signed-off-by: NMarcus Cooper <codekipper@gmail.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Marcus Cooper 提交于
Itead have a core module board that can be populated with either an Allwinner A10 or A20 SoC. This patch creates a common dtsi which these boards can use. Signed-off-by: NMarcus Cooper <codekipper@gmail.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 25 1月, 2016 17 次提交
-
-
由 Chen-Yu Tsai 提交于
mmc2 has a special pin for eMMC hardware reset, which is controllable from the controller. Add the "mmc-cap-hw-reset" property to denote that this controller supports this function, and the pins are actually used. Also increase the signal drive strength for mmc2 pins, for HS-DDR mode support. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Chen-Yu Tsai 提交于
mmc2 has a special pin for eMMC hardware reset, which is controllable from the controller. Add the "mmc-cap-hw-reset" property to denote that this controller supports this function, and the pins are actually used. Also increase the signal drive strength for mmc2 pins, for HS-DDR mode support. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Chen-Yu Tsai 提交于
mmc2_8bit_pins is used with eMMC chips, which also have a reset pin. The MMC controller also has a reset output that is supported. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Chen-Yu Tsai 提交于
mmc2_8bit_pins is used with eMMC chips, which also have a reset pin. The MMC controller also has a reset output that is supported. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Chen-Yu Tsai 提交于
According to Allwinner, only mmc3 supports 8 bit DDR transfers for eMMC. Switch to mmc3 for the onboard eMMC, and also assign vqmmc for signal voltage sensing, and "cap-mmc-hw-reset" to denote this instance can use eMMC hardware reset. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Chen-Yu Tsai 提交于
mmc2 and mmc3 are available on the same pins, with different mux values. However, only mmc3 supports 8 bit DDR transfer modes. Since preference for mmc3 over mmc2 is due to DDR transfer modes, just set the drive strength to 40mA, which is needed for DDR. This pinmux setting also includes the hardware reset pin for emmc. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Chen-Yu Tsai 提交于
sun9i/A80 MMC controllers have a larger FIFO, and the FIFO DMA trigger levels can be increased. Also, the mmc module clock parent has a higher clock rate, and the sample and output delay phases are different. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Chen-Yu Tsai 提交于
mmc2 has a special pin for eMMC hardware reset, which is controllable from the controller. Add the "mmc-cap-hw-reset" property to denote that this controller supports this function, and the pins are actually used. Also increase the signal drive strength for mmc2 pins, for HS-DDR mode support. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
The current DT doesn't have a phandle to the CPU regulator in the CPU node, which disables the CPU voltage scaling entirely. Add that phandle. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Chen-Yu Tsai 提交于
Cubietruck Plus is a A83T/H8 based development board. The board has standard DDR3 SDRAM, AXP818 PMIC/codec, SD/MMC, eMMC, USB 2.0 host via HSIC USB Hub, USB OTG, SATA via USB bridge, gigabit ethernet, WiFi, headphone out / mic in, and various GPIO headers. The board also has an EEPROM on i2c0 which holds the MAC address. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Chen-Yu Tsai 提交于
The A83T, like previous Allwinner SoCs, has a watchdog as part of its timer block. Add a device node for it. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Vishnu Patekar 提交于
A83T timer is compatible with that of earlier SOCs. Just add timer node to enable and re-use it. Signed-off-by: NVishnu Patekar <vishnupatekar0510@gmail.com> Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Vishnu Patekar 提交于
H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner. It has UART, ethernet, USB, HDMI, etc ports on it. A83T patches are tested on this board. It has UART, ethernet, USB, HDMI, etc ports on it. For FEL mode it needs USB A-A(Male) cable. I used uart0 which is multiplexed to microsd pins PF2 and PF4. Enabled UART0 Header(PB9, PB10 pins). Signed-off-by: NVishnu Patekar <vishnupatekar0510@gmail.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Vishnu Patekar 提交于
Allwinner A83T is new octa-core cortex-a7 SOC. This adds the basic dtsi, the clocks differs from earlier sun8i SOCs. Signed-off-by: NVishnu Patekar <vishnupatekar0510@gmail.com> [Maxime: Removed empty chosen node] Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Hans de Goede 提交于
Add a node describing the focaltech ft5306de4 touchscreen found on inet97fv2 tablets. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Hans de Goede 提交于
Add a node describing the focaltech ft5306de4 touchscreen found on chuwi-v7-cw0825 tablets. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Hans de Goede 提交于
Add a node describing the focaltech ft5406ee8 touchscreen found on inet-9f-rev03 / qware qw tb-g100 tablets. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 23 1月, 2016 1 次提交
-
-
由 Tetsuo Handa 提交于
There are many locations that do if (memory_was_allocated_by_vmalloc) vfree(ptr); else kfree(ptr); but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory using is_vmalloc_addr(). Unless callers have special reasons, we can replace this branch with kvfree(). Please check and reply if you found problems. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: NMichal Hocko <mhocko@suse.com> Acked-by: NJan Kara <jack@suse.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com> Acked-by: N"Rafael J. Wysocki" <rjw@rjwysocki.net> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Boris Petkov <bp@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 1月, 2016 2 次提交
-
-
由 Linus Walleij 提交于
As it happens, two obj-$(CONFIG_FOO) += foo.o variables are above obj-y := core.o, which doesn't work: the += directives need to add something to the build and doesn't work if obj-y is not set first, so move the obj-y to be on top and everything builds nicely again. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Christoph Hellwig 提交于
Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NValentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 1月, 2016 1 次提交
-
-
由 Arnd Bergmann 提交于
During my randconfig build testing, I found that a kernel with DEBUG_AT91_UART and ARCH_BCM_63XX fails to build: arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror] It turns out that the DEBUG_UART_BCM63XX option is enabled whenever the ARCH_BCM_63XX is, and that breaks multiplatform kernels because we then end up using the UART address from BCM63XX rather than the one we actually configured (if any). This changes the BCM63XX options to only have one Kconfig option, and only enable that if the user explicitly turns it on. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: b51312be ("ARM: BCM63XX: add low-level UART debug support") Cc: stable@vger.kernel.org
-
- 18 1月, 2016 1 次提交
-
-
由 Geert Uytterhoeven 提交于
On r8a7740/armadillo, actual clock rates are ca. 4% lower than reported by /sys/kernel/debug/clk/clk_summary. Correct the extal1 frequency from 25 MHz to 24 MHz to fix this. This matches the Armadillo-800 EVA Product Manual, which claims the main crystal runs at 24 MHz, and the old legacy/reference board code. Fixes: 25aa7ba3 ("ARM: shmobile: armadillo800eva: Sync DTS") Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 17 1月, 2016 1 次提交
-
-
由 Will Deacon 提交于
As illustrated by commit a3afe70b ("[S390] latencytop s390 support."), HAVE_LATENCYTOP_SUPPORT is defined by an architecture to advertise an implementation of save_stack_trace_tsk. However, as of 9212ddb5 ("stacktrace: provide save_stack_trace_tsk() weak alias") a dummy implementation is provided if STACKTRACE=y. Given that LATENCYTOP already depends on STACKTRACE_SUPPORT and selects STACKTRACE, we can remove HAVE_LATENCYTOP_SUPPORT altogether. Signed-off-by: NWill Deacon <will.deacon@arm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: James Hogan <james.hogan@imgtec.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Helge Deller <deller@gmx.de> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 1月, 2016 3 次提交
-
-
由 Dan Williams 提交于
To date, we have implemented two I/O usage models for persistent memory, PMEM (a persistent "ram disk") and DAX (mmap persistent memory into userspace). This series adds a third, DAX-GUP, that allows DAX mappings to be the target of direct-i/o. It allows userspace to coordinate DMA/RDMA from/to persistent memory. The implementation leverages the ZONE_DEVICE mm-zone that went into 4.3-rc1 (also discussed at kernel summit) to flag pages that are owned and dynamically mapped by a device driver. The pmem driver, after mapping a persistent memory range into the system memmap via devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus page-backed pmem-pfns via flags in the new pfn_t type. The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the resulting pte(s) inserted into the process page tables with a new _PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys off _PAGE_DEVMAP to pin the device hosting the page range active. Finally, get_page() and put_page() are modified to take references against the device driver established page mapping. Finally, this need for "struct page" for persistent memory requires memory capacity to store the memmap array. Given the memmap array for a large pool of persistent may exhaust available DRAM introduce a mechanism to allocate the memmap from persistent memory. The new "struct vmem_altmap *" parameter to devm_memremap_pages() enables arch_add_memory() to use reserved pmem capacity rather than the page allocator. This patch (of 18): The core has developed a need for a "pfn_t" type [1]. Move the existing pfn_t in KVM to kvm_pfn_t [2]. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.htmlSigned-off-by: NDan Williams <dan.j.williams@intel.com> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Minchan Kim 提交于
MADV_FREE needs pmd_dirty and pmd_mkclean for detecting recent overwrite of the contents since MADV_FREE syscall is called for THP page. This patch adds pmd_mkclean for THP page MADV_FREE support. Signed-off-by: NMinchan Kim <minchan@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Hugh Dickins <hughd@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rik van Riel <riel@redhat.com> Cc: Roland Dreier <roland@kernel.org> Cc: Shaohua Li <shli@kernel.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
Let's define page_mapped() to be true for compound pages if any sub-pages of the compound page is mapped (with PMD or PTE). On other hand page_mapcount() return mapcount for this particular small page. This will make cases like page_get_anon_vma() behave correctly once we allow huge pages to be mapped with PTE. Most users outside core-mm should use page_mapcount() instead of page_mapped(). Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: NSasha Levin <sasha.levin@oracle.com> Tested-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: NJerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-