Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 29 4月, 2009 2 次提交
  3. 09 4月, 2009 7 次提交
  5. 07 4月, 2009 10 次提交
  7. 06 4月, 2009 21 次提交
    • P
      perf_counter: update mmap() counter read · 92f22a38
      由 Peter Zijlstra 提交于 
      Paul noted that we don't need SMP barriers for the mmap() counter read
because its always on the same cpu (otherwise you can't access the hw
counter anyway).

So remove the SMP barriers and replace them with regular compiler
barriers.

Further, update the comment to include a race free method of reading
said hardware counter. The primary change is putting the pmc_read
inside the seq-loop, otherwise we can still race and read rubbish.
Noticed-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Orig-LKML-Reference: <20090402091319.577951445@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      92f22a38
    • P
      perf_counter: add more context information · 5872bdb8
      由 Peter Zijlstra 提交于 
      Put in counts to tell which ips belong to what context.

  -----
   | |  hv
   | --
nr | |  kernel
   | --
   | |  user
  -----
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Orig-LKML-Reference: <20090402091319.493101305@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      5872bdb8
    • P
      perf_counter: per event wakeups · c457810a
      由 Peter Zijlstra 提交于 
      By request, provide a way to request a wakeup every 'n' events instead
of every page of output.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Orig-LKML-Reference: <20090402091319.323309784@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c457810a
    • P
      perf_counter: move the event overflow output bits to record_type · 8a057d84
      由 Peter Zijlstra 提交于 
      Per suggestion from Paul, move the event overflow bits to record_type
and sanitize the enums a bit.

Breaks the ABI -- again ;-)
Suggested-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Orig-LKML-Reference: <20090402091319.151921176@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8a057d84
    • P
      perf_counter: provide generic callchain bits · 394ee076
      由 Peter Zijlstra 提交于 
      Provide the generic callchain support bits. If hw_event->callchain is
set the arch specific perf_callchain() function is called upon to
provide a perf_callchain_entry structure filled with the current
callchain.

If it does so, it is added to the overflow output event.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171024.254266860@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      394ee076
    • P
      perf_counter: re-arrange the perf_event_type · 5ed00415
      由 Peter Zijlstra 提交于 
      Breaks ABI yet again :-)

Change the event type so that [0, 2^31-1] are regular event types, but
[2^31, 2^32-1] forms a bitmask for overflow events.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171024.047961770@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      5ed00415
    • P
      perf_counter: executable mmap() information · 0a4a9391
      由 Peter Zijlstra 提交于 
      Currently the profiling information returns userspace IPs but no way
to correlate them to userspace code. Userspace could look into
/proc/$pid/maps but that might not be current or even present anymore
at the time of analyzing the IPs.

Therefore provide means to track the mmap information and provide it
in the output stream.

XXX: only covers mmap()/munmap(), mremap() and mprotect() are missing.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <20090330171023.417259499@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0a4a9391
    • P
      perf_counter: fix update_userpage() · 38ff667b
      由 Peter Zijlstra 提交于 
      It just occured to me it is possible to have multiple contending
updates of the userpage (mmap information vs overflow vs counter).
This would break the seqlock logic.

It appear the arch code uses this from NMI context, so we cannot
possibly serialize its use, therefore separate the data_head update
from it and let it return to its original use.

The arch code needs to make sure there are no contending callers by
disabling the counter before using it -- powerpc appears to do this
nicely.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171023.241410660@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      38ff667b
    • P
      perf_counter: unify and fix delayed counter wakeup · 925d519a
      由 Peter Zijlstra 提交于 
      While going over the wakeup code I noticed delayed wakeups only work
for hardware counters but basically all software counters rely on
them.

This patch unifies and generalizes the delayed wakeup to fix this
issue.

Since we're dealing with NMI context bits here, use a cmpxchg() based
single link list implementation to track counters that have pending
wakeups.

[ This should really be generic code for delayed wakeups, but since we
  cannot use cmpxchg()/xchg() in generic code, I've let it live in the
  perf_counter code. -- Eric Dumazet could use it to aggregate the
  network wakeups. ]

Furthermore, the x86 method of using TIF flags was flawed in that its
quite possible to end up setting the bit on the idle task, loosing the
wakeup.

The powerpc method uses per-cpu storage and does appear to be
sufficient.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090330171023.153932974@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      925d519a
    • P
      perf_counter: record time running and time enabled for each counter · 53cfbf59
      由 Paul Mackerras 提交于 
      Impact: new functionality

Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling.  That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.

This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events.  These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.

These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter.  (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)

Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:

true_count_estimate = count * total_time_enabled / total_time_running

This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.

This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.

In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace.  When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them.  (tstamp_stopped is only used in INACTIVE state.)  The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated.  There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.

This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace.  They are separate fields so that they can be
atomic.  We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.

It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group).  However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups.  (In both cases a
top-level task-clock counter was also added.)

In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).

[ v2: address review comments by Andrew Morton. ]
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      53cfbf59
    • P
      perf_counter: optionally provide the pid/tid of the sampled task · ea5d20cf
      由 Peter Zijlstra 提交于 
      Allow cpu wide counters to profile userspace by providing what process
the sample belongs to.

This raises the first issue with the output type, lots of these
options: group, tid, callchain, etc.. are non-exclusive and could be
combined, suggesting a bitfield.

However, things like the mmap() data stream doesn't fit in that.

How to split the type field...
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Orig-LKML-Reference: <20090325113317.013775235@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ea5d20cf
    • P
      perf_counter: output objects · 5c148194
      由 Peter Zijlstra 提交于 
      Provide a {type,size} header for each output entry.

This should provide extensible output, and the ability to mix multiple streams.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Orig-LKML-Reference: <20090325113316.831607932@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      5c148194
    • P
      perf_counter: fix perf_poll() · c7138f37
      由 Peter Zijlstra 提交于 
      Impact: fix kerneltop 100% CPU usage

Only return a poll event when there's actually been one, poll_wait()
doesn't actually wait for the waitq you pass it, it only enqueues
you on it.

Only once all FDs have been iterated and none of thm returned a
poll-event will it schedule().

Also make it return POLL_HUP when there's not mmap() area to read from.

Further, fix a silly bug in the write code.
Reported-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Orig-LKML-Reference: <1237897096.24918.181.camel@twins>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c7138f37
    • P
      perf_counter: new output ABI - part 1 · 7b732a75
      由 Peter Zijlstra 提交于 
      Impact: Rework the perfcounter output ABI

use sys_read() only for instant data and provide mmap() output for all
async overflow data.

The first mmap() determines the size of the output buffer. The mmap()
size must be a PAGE_SIZE multiple of 1+pages, where pages must be a
power of 2 or 0. Further mmap()s of the same fd must have the same
size. Once all maps are gone, you can again mmap() with a new size.

In case of 0 extra pages there is no data output and the first page
only contains meta data.

When there are data pages, a poll() event will be generated for each
full page of data. Furthermore, the output is circular. This means
that although 1 page is a valid configuration, its useless, since
we'll start overwriting it the instant we report a full page.

Future work will focus on the output format (currently maintained)
where we'll likey want each entry denoted by a header which includes a
type and length.

Further future work will allow to splice() the fd, also containing the
async overflow data -- splice() would be mutually exclusive with
mmap() of the data.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090323172417.470536358@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7b732a75
    • P
      perf_counter: add an mmap method to allow userspace to read hardware counters · 37d81828
      由 Paul Mackerras 提交于 
      Impact: new feature giving performance improvement

This adds the ability for userspace to do an mmap on a hardware counter
fd and get access to a read-only page that contains the information
needed to translate a hardware counter value to the full 64-bit
counter value that would be returned by a read on the fd.  This is
useful on architectures that allow user programs to read the hardware
counters, such as PowerPC.

The mmap will only succeed if the counter is a hardware counter
monitoring the current process.

On my quad 2.5GHz PowerPC 970MP machine, userspace can read a counter
and translate it to the full 64-bit value in about 30ns using the
mmapped page, compared to about 830ns for the read syscall on the
counter, so this does give a significant performance improvement.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090323172417.297057964@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      37d81828
    • P
      perf_counter: avoid recursion · 96f6d444
      由 Peter Zijlstra 提交于 
      Tracepoint events like lock_acquire and software counters like
pagefaults can recurse into the perf counter code again, avoid that.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090323172417.152096433@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      96f6d444
    • P
      perf_counter: remove the event config bitfields · f4a2deb4
      由 Peter Zijlstra 提交于 
      Since the bitfields turned into a bit of a mess, remove them and rely on
good old masks.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Orig-LKML-Reference: <20090323172417.059499915@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f4a2deb4
    • P
      perf_counter: fix type/event_id layout on big-endian systems · 9aaa131a
      由 Paul Mackerras 提交于 
      Impact: build fix for powerpc

Commit db3a944aca35ae61 ("perf_counter: revamp syscall input ABI")
expanded the hw_event.type field into a union of structs containing
bitfields.  In particular it introduced a type field and a raw_type
field, with the intention that the 1-bit raw_type field should
overlay the most-significant bit of the 8-bit type field, and in fact
perf_counter_alloc() now assumes that (or at least, assumes that
raw_type doesn't overlay any of the bits that are 1 in the values of
PERF_TYPE_{HARDWARE,SOFTWARE,TRACEPOINT}).

Unfortunately this is not true on big-endian systems such as PowerPC,
where bitfields are laid out from left to right, i.e. from most
significant bit to least significant.  This means that setting
hw_event.type = PERF_TYPE_SOFTWARE will set hw_event.raw_type to 1.

This fixes it by making the layout depend on whether or not
__BIG_ENDIAN_BITFIELD is defined.  It's a bit ugly, but that's what
we get for using bitfields in a user/kernel ABI.

Also, that commit didn't fix up some places in arch/powerpc/kernel/
perf_counter.c where hw_event.raw and hw_event.event_id were used.
This fixes them too.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      9aaa131a
    • P
      perf_counter: unify irq output code · 0322cd6e
      由 Peter Zijlstra 提交于 
      Impact: cleanup

Having 3 slightly different copies of the same code around does nobody
any good. First step in revamping the output format.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194233.929962222@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0322cd6e
    • P
      perf_counter: revamp syscall input ABI · b8e83514
      由 Peter Zijlstra 提交于 
      Impact: modify ABI

The hardware/software classification in hw_event->type became a little
strained due to the addition of tracepoint tracing.

Instead split up the field and provide a type field to explicitly specify
the counter type, while using the event_id field to specify which event to
use.

Raw counters still work as before, only the raw config now goes into
raw_event.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194233.836807573@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b8e83514
    • P
      perf_counter: hook up the tracepoint events · e077df4f
      由 Peter Zijlstra 提交于 
      Impact: new perfcounters feature

Enable usage of tracepoints as perf counter events.

tracepoint event ids can be found in /debug/tracing/event/*/*/id
and (for now) are represented as -65536+id in the type field.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194233.744044174@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e077df4f