Blacklist FUJITSU MHT2060BH for NCQ.  On this drive, NCQ works iff
queue depth is equal to or less than 4.  Just turn it off.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Mike Accetta <maccetta@laurelnetworks.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Kill unused local variable idx in sil24_fill_sg().

Spotted by Jeff Garzik.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Clearing drvdata in ->remove_one causes NULL pointer deference.  Clear
drvdata only in ata_host_release() after all resources are freed.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix invalidate_inode_pages2_range() so that it does not immediately exit
just because a single page in the specified range could not be removed.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes a possible race that leads to double freeing an idr index.
 When the master begin to close, release_dev() is called and then
pty_close() is called:

        if (tty->driver->close)
                tty->driver->close(tty, filp);

This is done without helding any locks other than BKL.  Inside pty_close(),
being a master close, the devpts entry will be removed:

#ifdef CONFIG_UNIX98_PTYS
                if (tty->driver == ptm_driver)
                        devpts_pty_kill(tty->index);
#endif

But devpts_pty_kill() will call get_node() that may sleep while waiting for
&devpts_root->d_inode->i_sem.  When this happens and the slave is being
opened, tty_open() just found the driver and index:

        driver = get_tty_driver(device, &index);
        if (!driver) {
                mutex_unlock(&tty_mutex);
                return -ENODEV;
        }

This part of the code is already protected under tty_mute.  The problem is
that the slave close already got an index.  Then init_dev() is called and
blocks waiting for the same &devpts_root->d_inode->i_sem.

When the master close resumes, it removes the devpts entry, and the
relation between idr index and the tty is gone.  The master then sleeps
waiting for the tty_mutex on release_dev().

Slave open resumes and found no tty for that index.  As result, a NULL tty
is returned and init_dev() doesn't flow to fast_track:

        /* check whether we're reopening an existing tty */
        if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
                tty = devpts_get_tty(idx);
                if (tty && driver->subtype == PTY_TYPE_MASTER)
                        tty = tty->link;
        } else {
                tty = driver->ttys[idx];
        }
        if (tty) goto fast_track;

The result of this, is that a new tty will be created and init_dev() returns
sucessfull. After returning, tty_mutex is dropped and master close may resume.

Master close finds it's the only use and both sides are closing, then releases
the tty and the index. At this point, the idr index is free, but slave still
has it.

Slave open then calls pty_open() and finds that tty->link->count is 0,
because there's no master and returns error.  Then tty_open() calls
release_dev() which executes without any warning, as it was a case of last
slave close when the master is already closed (master->count == 0,
slave->count == 1).  The tty is then released with the already released idr
index.

This normally would only issue a warning on idr_remove() but in case of a
customer's critical application, it's never too simple:

thread1: opens master, gets index X
thread1: begin closing master
thread2: begin opening slave with index X
thread1: finishes closing master, index X released
thread3: opens master, gets index X, just released
thread2: fails opening slave, releases index X         <----
thread4: opens master, gets index X, init_dev() then find an already in use
	 and healthy tty and fails

If no more indexes are released, ptmx_open() will keep failing, as the
first free index available is X, and it will make init_dev() fail because
you're trying to "reopen a master" which isn't valid.

The patch notices when this race happens and make init_dev() fail
imediately.  The init_dev() function is called with tty_mutex held, so it's
safe to continue with tty till the end of function because release_dev()
won't make any further changes without grabbing the tty_mutex.

Without the patch, on some machines it's possible get easily idr warnings
like this one:

idr_remove called for id=15 which is not allocated.
 [<c02555b9>] idr_remove+0x139/0x170
 [<c02a1b62>] release_mem+0x182/0x230
 [<c02a28e7>] release_dev+0x4b7/0x700
 [<c02a0ea7>] tty_ldisc_enable+0x27/0x30
 [<c02a1e64>] init_dev+0x254/0x580
 [<c02a0d64>] check_tty_count+0x14/0xb0
 [<c02a4f05>] tty_open+0x1c5/0x340
 [<c02a4d40>] tty_open+0x0/0x340
 [<c017388f>] chrdev_open+0xaf/0x180
 [<c017c2ac>] open_namei+0x8c/0x760
 [<c01737e0>] chrdev_open+0x0/0x180
 [<c0167bc9>] __dentry_open+0xc9/0x210
 [<c0167e2c>] do_filp_open+0x5c/0x70
 [<c0167a91>] get_unused_fd+0x61/0xd0
 [<c0167e93>] do_sys_open+0x53/0x100
 [<c0167f97>] sys_open+0x27/0x30
 [<c010303b>] syscall_call+0x7/0xb

using this test application available on:
 http://www.ruivo.org/~aris/pty_sodomizer.cSigned-off-by: NAristeu Sergio Rozanski Filho <aris@ruivo.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When it goes to free1_out, dev->dma_mem has not been freed.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The CAPI trace debug functions were using a fixed size buffer, which can be
overflowed if wrong formatted CAPI messages were sent to the kernel capi
layer.  The code was also not protected against multiple callers.  This fix
bug 8028.

Additionally the patch make the CAPI trace functions optional.
Signed-off-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

page_lock_anon_vma() uses spin_lock() to block RCU.  This doesn't work with
PREEMPT_RCU, we have to do rcu_read_lock() explicitely.  Otherwise, it is
theoretically possible that slab returns anon_vma's memory to the system
before we do spin_unlock(&anon_vma->lock).

[ Hugh points out that this only matters for PREEMPT_RCU, which isn't merged
  yet, and may never be.  Regardless, this patch is conceptually the
  right thing to do, even if it doesn't matter at this point.  - Linus ]
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Acked-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Describes how/when the information exported to `/proc/stat' is calculated,
and possible problems with this approach.
Signed-off-by: NVassili Karpov <av1474@comtv.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The SMT scheduler incorrectly skips kernel threads even if they are
runnable (but they are preempted by a higher-prio user-space task which got
SMT-delayed by an even higher-priority task running on a sibling CPU).

Fix this for now by only doing the SMT-nice optimization if the
to-be-delayed task is the only runnable task.  (This should cover most of
the real-life cases anyway.)

This bug has been in the SMT scheduler since 2.6.17 or so, but has only
been noticed now by the active check in the dynticks code.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ps3: Introduce CONFIG_PS3_ADVANCED, as suggested by Roman Zippel, and use
it to control questions about PS3 subsystems that may not be obvious for
the casual user.

This gets rid of the following warning on non-powerpc platforms: |
drivers/video/Kconfig:1604:warning: 'select' used by config symbol 'FB_PS3'
refer to undefined symbol 'PS3_PS3AV'
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are race issues around ext[34] xattr block release code.

ext[34]_xattr_release_block() checks the reference count of xattr block
(h_refcount) and frees that xattr block if it is the last one reference it.
 Unlike ext2, the check of this counter is unprotected by any lock.
ext[34]_xattr_release_block() will free the mb_cache entry before freeing
that xattr block.  There is a small window between the check for the re
h_refcount ==1 and the call to mb_cache_entry_free().  During this small
window another inode might find this xattr block from the mbcache and reuse
it, racing a refcount updates.  The xattr block will later be freed by the
first inode without notice other inode is still use it.  Later if that
block is reallocated as a datablock for other file, then more serious
problem might happen.

We need put a lock around places checking the refount as well to avoid
racing issue.  Another place need this kind of protection is in
ext3_xattr_block_set(), where it will modify the xattr block content in-
the-fly if the refcount is 1 (means it's the only inode reference it).

This will also fix another issue: the xattr block may not get freed at all
if no lock is to protect the refcount check at the release time.  It is
possible that the last two inodes could release the shared xattr block at
the same time.  But both of them think they are not the last one so only
decreased the h_refcount without freeing xattr block at all.

We need to call lock_buffer() after ext3_journal_get_write_access() to
avoid deadlock (because the later will call lock_buffer()/unlock_buffer
() as well).
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Cc: Andreas Gruenbacher <agruen@suse.de>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the fact that pte_mkread set _PAGE_RW instead of _PAGE_USER (the logic is
copied from i386 in most place, so it is really as bad as you're thinking).

Thus currently page tables are more permissive than they should.

Such a change may trigger other latent bugs, so be careful with this.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes a problem seen by a number of people running UML on newer host
kernels.  init would hang with an infinite segfault loop.

It turns out that the host kernel was providing a AT_SYSINFO_EHDR of
0xffffe000, which faked UML into believing that the host VDSO page could be
reused.  However, AT_SYSINFO pointed into the middle of the address space, and
was unmapped as a result.  Because UML was providing AT_SYSINFO_EHDR and
AT_SYSINFO to its own processes, these would branch to nowhere when trying to
use the VDSO.

The fix is to also check the location of AT_SYSINFO when deciding whether to
use the host's VDSO.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the RAW device driver options to the UML Kconfig.char file so that you may
use them in UML.

Signed-off-by: Allan Graves<allan.graves@gmail.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

linux/irq.h uses EINVAL but does not #include linux/errno.h.  This results in
the compiler spitting out errors on some files.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

throttle_vm_writeout() is designed to wait for the dirty levels to subside.
But if the caller holds IO or FS locks, we might be holding up that writeout.

So change it to take a single nap to give other devices a chance to clean some
memory, then return.

Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since the bay driver depends on the dock driver for proper notification,
make this driver depend on the dock driver.
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Acked-by: NLen Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The code is seemingly trying to make sure that rb_next() brings us to
successive increasing vma entries.

But the two variables, prev and pend, used to perform these checks, are
never advanced.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Cc: Andrea Arcangeli <andrea@novell.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the 2.6.20 hang patch, I accidentally threw out an error message.
This puts it back.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add some locking to host_ldt_entries to prevent racing when reading LDT
information from the host.

The locking is somewhat more careful than my previous attempt.  Now, only
the check of host_ldt_entries is locked.  The lock is dropped immediately
afterwards, and if the LDT needs initializing, that (and the memory
allocations needed) proceed outside the lock.

Also fixed some style violations.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

a) Remove #define acrobatics that have become unnecessary by the move of
   asyncdata.o into the common part.

b) Correct the rule for building the common part into the kernel when
   some or all hardware specific parts are built as modules.
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Dmitriy Monakhov wrote:
> if path_lookup() return non zero code we don't have to worry about
> 'nd' parameter, but ecryptfs_read_super does path_release(&nd) after
> path_lookup has failed, and dentry counter becomes negative

Do not do a path_release after a path_lookup error.
Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com>
Cc: Dmitriy Monakhov <dmonakhov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove unnecessary flush_dcache_page() call. Thanks to Dmitriy
Monakhov for pointing this out.
Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com>
Cc: Dmitriy Monakhov <dmonakhov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

O_LARGEFILE should be set here when opening the lower file.
Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com>
Cc: Dmitriy Monakhov <dmonakhov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix an oops on the rtc_device_unregister() path by waiting until the last
moment before nulling the rtc->ops vector.  Fix some potential oopses by
having the rtc_class_open()/rtc_class_close() interface increase the RTC's
reference count while an RTC handle is available outside the RTC framework.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

adaplas@pol.net is still alive, but is choking on the traffic.
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add -mm testing to SubmitChecklist.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lockdep_init() is marked __init but used in several places
outside __init code. This causes following warnings:
$ scripts/mod/modpost kernel/lockdep.o
WARNING: kernel/built-in.o - Section mismatch: reference to .init.text:lockdep_init from .text.lockdep_init_map after 'lockdep_init_map' (at offset 0x105)
WARNING: kernel/built-in.o - Section mismatch: reference to .init.text:lockdep_init from .text.lockdep_reset_lock after 'lockdep_reset_lock' (at offset 0x35)
WARNING: kernel/built-in.o - Section mismatch: reference to .init.text:lockdep_init from .text.__lock_acquire after '__lock_acquire' (at offset 0xb2)

The warnings are less obviously due to heavy inlining by gcc - this is not
altered.

Fix the section mismatch warnings by removing the __init marking, which
seems obviously wrong.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename PG_checked to PG_owner_priv_1 to reflect its availablilty as a
private flag for use by the owner/allocator of the page.  In the case of
pagecache pages (which might be considered to be owned by the mm),
filesystems may use the flag.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/home/bunk/linux/kernel-2.6/linux-2.6.20-mm2/kernel/sysctl.c:1411: error: conflicting types for 'register_sysctl_table'
/home/bunk/linux/kernel-2.6/linux-2.6.20-mm2/include/linux/sysctl.h:1042: error: previous declaration of 'register_sysctl_table' was here
make[2]: *** [kernel/sysctl.o] Error 1

Caused by commit 0b4d4147.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Problem description at:
http://bugzilla.kernel.org/show_bug.cgi?id=8048

Commit b18ec803
    [PATCH] sched: improve migration accuracy
optimized the scheduler time calculations, but broke posix-cpu-timers.

The problem is that the p->last_ran value is not updated after a context
switch.  So a subsequent call to current_sched_time() calculates with a
stale p->last_ran value, i.e.  accounts the full time, which the task was
scheduled away.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

eCryptfs lower file handling code has several issues:
  - Retval from prepare_write()/commit_write() wasn't checked to equality
    to AOP_TRUNCATED_PAGE.
  - In some places page wasn't unmapped and unlocked after error.
Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix kernel-doc warnings in 2.6.20-git15 (lib/, mm/, kernel/, include/).
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow space(s) between "__attribute__" and "((blah))" so that
kernel-doc does not complain like:

Warning(/tester/linsrc/linux-2.6.20-git15//kernel/timer.c:939): No description found for parameter 'read_persistent_clock(void'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDaniel Walker <dwalker@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add some missing lazy MMU hooks for NOMMU mode.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

FRV does not require a ZONE_DMA, so all DMA'able pages that aren't highmem
should be in ZONE_NORMAL.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

i.e. one or more drives can be added and the array will re-stripe
while on-line.

Most of the interesting work was already done for raid5.  This just extends it
to raid6.

mdadm newer than 2.6 is needed for complete safety, however any version of
mdadm which support raid5 reshape will do a good enough job in almost all
cases (an 'echo repair > /sys/block/mdX/md/sync_action' is recommended after a
reshape that was aborted and had to be restarted with an such a version of
mdadm).
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

An error always aborts any resync/recovery/reshape on the understanding that
it will immediately be restarted if that still makes sense.  However a reshape
currently doesn't get restarted.  With this patch it does.

To avoid restarting when it is not possible to do work, we call into the
personality to check that a reshape is ok, and strengthen raid5_check_reshape
to fail if there are too many failed devices.

We also break some code out into a separate function: remove_and_add_spares as
the indent level for that code was getting crazy.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>