提交 · 088d01b00e335230bc51be6ae396babb9767e9ea · openeuler / raspberrypi-kernel

11 10月, 2010 17 次提交

mx51: add support for genesi efikamx nettop · 088d01b0

由 Amit Kucheria 提交于 10月 07, 2010

Get serial port working for now
Signed-off-by: NAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

088d01b0

spi/imx: Support different fifo sizes · 6ff554e0

由 David Jander 提交于 10月 08, 2010

The i.MX51 ECSPI has a fifo size of 64 entries instead of 8 entries as
found on the other cspi bus devices.

Cc: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: NDavid Jander <david@protonic.nl>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

6ff554e0

ARM: iomux-mx51: Add AUD5 pinmux definitions · 4b5ee7a7

由 Sascha Hauer 提交于 10月 09, 2010

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

4b5ee7a7

mx25/clocks: match esdhc-clocks to platform device · 0d0e9cbf

由 Wolfram Sang 提交于 10月 11, 2010

So the correct clock will be taken for each of the two independent
controllers.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

0d0e9cbf

mxc/gpio: make _set_value work with values != 0/1 · 886ab3da

由 Peter Korsgaard 提交于 10月 11, 2010

Documentation/gpio.txt specifies that the value argument to
gpio_set_value() should be handled as a boolean (E.G. != 0 is high),
so use the same logic as in _set_direction().
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

886ab3da

MX35: Fix bogus L2 cache settings · 9524705c

由 Juergen Beisert 提交于 9月 22, 2010

i.MX35 CPUs marked with "MCIMX357CJQ5C M99V CTHA0943B" are coming with bogus
L2 cache settings. If these settings are kept unmodified prior enabling the L2
cache the CPU runs amok immediately when its enabled.

This fix should not hurt already working CPUs, as they are using the written
register value already.

Its currently unknown if its possible to detect the production lot from the
software to fix only affected CPUs.

While at it, make sure that mxc_init_l2x0 is only executed on i.MX31/35
Signed-off-by: NJuergen Beisert <jbe@pengutronix.de>
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

9524705c

ARM: mx3/cpuimx35: mark otg_pdata and usbh1_pdata as maybe unused · 55fd2ef6

由 Uwe Kleine-König 提交于 10月 06, 2010

This fixes

	arch/arm/mach-mx3/mach-cpuimx35.c:143: warning: 'otg_pdata' defined but not used
	arch/arm/mach-mx3/mach-cpuimx35.c:148: warning: 'usbh1_pdata' defined but not used

when USB_ULPI is not selected.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

55fd2ef6

ARM: imx: dynamically register fec devices · 6bd96f3c

由 Uwe Kleine-König 提交于 10月 06, 2010

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

6bd96f3c

ARM: imx: fix/define clocks and create devices for imx dma · 8a8d2060

由 Uwe Kleine-König 提交于 10月 08, 2010

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

8a8d2060

ARM: mx35: Add mx35_revision function to query the silicon revision · 67520f3a

由 Eric Bénard 提交于 10月 08, 2010

Based on work done earlier by Sascha Hauer
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NEric Bénard <eric@eukrea.com>
[ukl: actually squash the two approaches together]
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

67520f3a

ARM: mx3: use MX3x_ prefixed version of CHIP_REV_x · fdb03870

由 Sascha Hauer 提交于 10月 08, 2010

Also, remove the deprecated symbols from arch/arm/mach-mx3/cpu.c
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

fdb03870

E
eukrea_mbimxsd for cpuimx25: add CAN & SDCard support · 6f8460eb
由 Eric Bénard 提交于 10月 02, 2010
```
Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
6f8460eb

i.mx25: add esdhc support · f5e40c28

由 Eric Bénard 提交于 10月 02, 2010

Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

f5e40c28

E
eukrea_mbimxsd for cpuimx35: add CAN & SDCard support · 438a4d66
由 Eric Bénard 提交于 10月 02, 2010
```
Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
438a4d66

arm: pcm043: add esdhc-device to boardconfig · 9a545943

由 Wolfram Sang 提交于 10月 11, 2010

Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

9a545943

arm: imx35: add esdhc-device to MX35-platform · 774305d0

由 Wolfram Sang 提交于 10月 11, 2010

Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

774305d0

arm: imx: add generic esdhc device · 203a0734

由 Wolfram Sang 提交于 10月 11, 2010

Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

203a0734

04 10月, 2010 1 次提交

mach-cpuimx35: remove unecessary tsc2007 functions + style cleanup · 54dc3f46

由 Eric Bénard 提交于 10月 02, 2010

- remove functions which are no more necessary for tsc2007
- indent platform_data for better readability
Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

54dc3f46

01 10月, 2010 22 次提交

ARM: imx/pca100: only specify i2c device type once · bd9e310d

由 Uwe Kleine-König 提交于 9月 28, 2010

The first argument to I2C_BOARD_INFO is used to assign .type, so it should
not be specified a second time.

For the rtc-pcf8563/pcf8563 entry gcc preferred pcf8563, so did I.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

bd9e310d

ARM: imx/pcm970: make platform_data static · 214b4310

由 Uwe Kleine-König 提交于 9月 28, 2010

This fixes the following sparse warning:

arch/arm/mach-imx/pcm970-baseboard.c:224:13: warning: symbol 'pcm970_baseboard_init' was not declared. Should it be static?
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

214b4310

ARM: imx: make all pin lists const and signed, move to .init where possible · 6c80ee51

由 Uwe Kleine-König 提交于 9月 28, 2010

Making the lists signed fixes sparse warnings like:

arch/arm/mach-imx/mach-mx27_3ds.c:94:31: warning: incorrect type in argument 1 (different signedness)
arch/arm/mach-imx/mach-mx27_3ds.c:94:31: expected int const *pin_list
arch/arm/mach-imx/mach-mx27_3ds.c:94:31: got unsigned int static [toplevel] *<noident>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

6c80ee51

ARM: imx/pcm038: make regulator platform data static · 7ad211e3

由 Uwe Kleine-König 提交于 9月 28, 2010

This fixes the following sparse warning:

arch/arm/mach-imx/pcm970-baseboard.c:203:30: warning: symbol 'pcm970_sja1000_platform_data' was not declared. Should it be static?
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

7ad211e3

ARM: imx/clock-imx27: Pass NULL as function callback, not 0 · 13040066

由 Uwe Kleine-König 提交于 9月 28, 2010

This fixes many sparse warnings like:

	arch/arm/mach-imx/clock-imx27.c:597:1: warning: Using plain integer as NULL pointer
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

13040066

ARM: mx5: clock-imx51: make *ipg clocks secondary clocks of their corresponding peripheral clocks · 8f6e900a

由 Sascha Hauer 提交于 8月 25, 2010

Currently the uarts and timer only work because they are
turned on by reset default. Make them secondary clocks
of their corresponding peripheral clocks to make sure they
are turned on when necessary. Also, register some clocks
to get rid of compiler warnings
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

8f6e900a

ARM: mx5: dynamically register mxc-nand device · 63a7c6d7

由 Sascha Hauer 提交于 8月 03, 2010

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

63a7c6d7

ARM: imx: reorganize nand registration to use a struct · 00b57bf9

由 Uwe Kleine-König 提交于 8月 23, 2010

Addiontionally make the interrupt #defines match the base address
defines MX.._NFC_BASE_ADDR.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

00b57bf9

ARM: mx51: Add audmux support · 40e2eda9

由 Sascha Hauer 提交于 8月 20, 2010

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

40e2eda9

ARM: mx51: add imx-ssi devices · b8618661

由 Sascha Hauer 提交于 8月 20, 2010

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

b8618661

ARM: mx51: dynamically register imx-uart devices · 04b73b15

由 Uwe Kleine-König 提交于 8月 11, 2010

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

04b73b15

ARM: mx5: Add Nand clock support · 2b82e64d

由 Sascha Hauer 提交于 8月 03, 2010

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

2b82e64d

ARM: mx5/iomux-mx51: Fix input path of some pins in gpio mode · f781bc8a

由 Sascha Hauer 提交于 8月 24, 2010

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

f781bc8a

ARM: mx5/iomux-mx51: Add aud3 primary function defines · 2e35bab5

由 Sascha Hauer 提交于 8月 20, 2010

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

2e35bab5

ARM: mx5/iomux-mx51: Add SPI controller pads · 8efd9271

由 Sascha Hauer 提交于 8月 20, 2010

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

8efd9271

ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stage · 8005cf2e

由 Jason Wang 提交于 9月 02, 2010

A 2M bytes SPI NOR flash(sst25vf016b) is soldered on the mx51_3ds
board.  So add the corresponding device for it.
Signed-off-by: NJason Wang <jason77.wang@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

8005cf2e

ARM: mx5/mx51_3ds: add eCSPI2 support on the imx51_3ds board · 988916e1

由 Jason Wang 提交于 9月 02, 2010

Signed-off-by: NJason Wang <jason77.wang@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

988916e1

ARM: mx5/iomux-mx51: add iomux definitions for eCSPI2 on the imx51_3ds board · eaa4fd0b

由 Jason Wang 提交于 9月 02, 2010

On the imx51_3ds board, eCSPI2 is connected to a SPI NOR flash,
now add iomux definitions for those used pins.
Signed-off-by: NJason Wang <jason77.wang@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

eaa4fd0b

ARM: mx5/clock-mx51: add spi clocks · 8d83db81

由 Jason Wang 提交于 9月 02, 2010

Signed-off-by: NJason Wang <jason77.wang@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

8d83db81

ARM: mx5/clock-mx51: new macro that defines a clk with all members · 74d99f39

由 Uwe Kleine-König 提交于 9月 10, 2010

Acked-by: NJason Wang <jason77.wang@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

74d99f39

ARM: mx5/clock-mx51: refactor ccgr callbacks to use common code · 79901478

由 Uwe Kleine-König 提交于 9月 10, 2010

Acked-by: NJason Wang <jason77.wang@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

79901478

ARM: mx5: add spi_imx device registration · 9f0c11ee

由 Uwe Kleine-König 提交于 9月 10, 2010

Acked-by: NJason Wang <jason77.wang@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

9f0c11ee