I have seen confusing behavior on JFS when I injected many intentional
slab allocation errors. The cp command failed with no disk space error
with enough disk space.

This patch makes:

- change the return value in case slab allocation failures happen
  from -ENOSPC to -ENOMEM

- ialloc() return error code so that the caller can know the reason
  of failures
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
(cherry picked from 2b46f77976f798f3fe800809a1d0ed38763c71c8 commit)

Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
(cherry picked from bdc3d9e5af7d9c105be734dd7b5c3f1d9425a15a commit)

Using the infrastructure created in previous patches implement support to
pipe core dumps into programs.

This is done by overloading the existing core_pattern sysctl
with a new syntax:

|program

When the first character of the pattern is a '|' the kernel will instead
threat the rest of the pattern as a command to run.  The core dump will be
written to the standard input of that program instead of to a file.

This is useful for having automatic core dump analysis without filling up
disks.  The program can do some simple analysis and save only a summary of
the core dump.

The core dump proces will run with the privileges and in the name space of
the process that caused the core dump.

I also increased the core pattern size to 128 bytes so that longer command
lines fit.

Most of the changes comes from allowing core dumps without seeks.  They are
fairly straight forward though.

One small incompatibility is that if someone had a core pattern previously
that started with '|' they will get suddenly new behaviour.  I think that's
unlikely to be a real problem though.

Additional background:

> Very nice, do you happen to have a program that can accept this kind of
> input for crash dumps?  I'm guessing that the embedded people will
> really want this functionality.

I had a cheesy demo/prototype.  Basically it wrote the dump to a file again,
ran gdb on it to get a backtrace and wrote the summary to a shared directory.
Then there was a simple CGI script to generate a "top 10" crashes HTML
listing.

Unfortunately this still had the disadvantage to needing full disk space for a
dump except for deleting it afterwards (in fact it was worse because over the
pipe holes didn't work so if you have a holey address map it would require
more space).

Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as
cores (at least it worked with zsh's =(cat core) syntax), so it would be
likely possible to do it without temporary space with a simple wrapper that
calls it in the right way.  I ran out of time before doing that though.

The demo prototype scripts weren't very good.  If there is really interest I
can dig them out (they are currently on a laptop disk on the desk with the
laptop itself being in service), but I would recommend to rewrite them for any
serious application of this and fix the disk space problem.

Also to be really useful it should probably find a way to automatically fetch
the debuginfos (I cheated and just installed them in advance).  If nobody else
does it I can probably do the rewrite myself again at some point.

My hope at some point was that desktops would support it in their builtin
crash reporters, but at least the KDE people I talked too seemed to be happy
with their user space only solution.

Alan sayeth:

  I don't believe that piping as such as neccessarily the right model, but
  the ability to intercept and processes core dumps from user space is asked
  for by many enterprise users as well.  They want to know about, capture,
  analyse and process core dumps, often centrally and in automated form.

[akpm@osdl.org: loff_t != unsigned long]
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Split the big and hard to read do_pipe function into smaller pieces.

This creates new create_write_pipe/free_write_pipe/create_read_pipe
functions.  These functions are made global so that they can be used by
other parts of the kernel.

The resulting code is more generic and easier to read and has cleaner error
handling and less gotos.

[akpm@osdl.org: cleanup]
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some filesystems, instead of simply decrementing i_nlink, simply zero it
during an unlink operation.  We need to catch these in addition to the
decrement operations.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

OCFS2 does some operations on i_nlink, then reverts them if some of its
operations fail to complete.  This does not fit in well with the
drop_nlink() logic where we expect i_nlink to stay at zero once it gets
there.

So, delay all of the nlink operations until we're sure that the operations
have completed.  Also, introduce a small helper to check whether an inode
has proper "unlinkable" i_nlink counts no matter whether it is a directory
or regular inode.

This patch is broken out from the others because it does contain some
logical changes.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is mostly included for parity with dec_nlink(), where we will have some
more hooks.  This one should stay pretty darn straightforward for now.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When a filesystem decrements i_nlink to zero, it means that a write must be
performed in order to drop the inode from the filesystem.

We're shortly going to have keep filesystems from being remounted r/o between
the time that this i_nlink decrement and that write occurs.

So, add a little helper function to do the decrements.  We'll tie into it in a
bit to note when i_nlink hits zero.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The code around vfs_create() in open_namei() is getting a bit too complex.
Right now, there is at least the reference count on the dentry, and the
i_mutex to worry about.  Soon, we'll also have mnt_writecount.

So, break the vfs_create() call out of open_namei(), and into a helper
function.  This duplicates the call to may_open(), but that isn't such a bad
thing since the arguments (acc_mode and flag) were being heavily massaged
anyway.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We're shortly going to be adding a bunch more permission checks in these
functions.  That requires adding either a bunch of new if() conditions, or
some gotos.  This patch collapses existing if()s and uses gotos instead to
prepare for the upcoming changes.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There were a few accounting data/macros that are used in CSA but are #ifdef'ed
inside CONFIG_BSD_PROCESS_ACCT.  This patch is to change those ifdef's from
CONFIG_BSD_PROCESS_ACCT to CONFIG_TASK_XACCT.  A few defines are moved from
kernel/acct.c and include/linux/acct.h to kernel/tsacct.c and
include/linux/tsacct_kern.h.
Signed-off-by: NJay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jes Sorensen <jes@sgi.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This work is initially done by Zach Brown to add support for vectored aio.
These are the core changes for AIO to support
IOCB_CMD_PREADV/IOCB_CMD_PWRITEV.

[akpm@osdl.org: huge build fix]
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Acked-by: NBenjamin LaHaise <bcrl@kvack.org>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch cleans up generic_file_*_read/write() interfaces.  Christoph
Hellwig gave me the idea for this clean ups.

In a nutshell, all filesystems should set .aio_read/.aio_write methods and use
do_sync_read/ do_sync_write() as their .read/.write methods.  This allows us
to cleanup all variants of generic_file_* routines.

Final available interfaces:

generic_file_aio_read() - read handler
generic_file_aio_write() - write handler
generic_file_aio_write_nolock() - no lock write handler

__generic_file_aio_write_nolock() - internal worker routine
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes readv() and writev() methods and replaces them with
aio_read()/aio_write() methods.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch vectorizes aio_read() and aio_write() methods to prepare for
collapsing all aio & vectored operations into one interface - which is
aio_read()/aio_write().
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Michael Holzheu <HOLZHEU@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When a file system becomes fragmented (using MythTV, for example), the
bigalloc window searching ends up causing huge performance problems.  In a
file system presented by a user experiencing this bug, the file system was
90% free, but no 32-block free windows existed on the entire file system.
This causes the allocator to scan the entire file system for each 128k
write before backing down to searching for individual blocks.

In the end, finding a contiguous window for all the blocks in a write is an
advantageous special case, but one that can be found naturally when such a
window exists anyway.

This patch removes the bigalloc window searching, and has been proven to
fix the test case described above.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The other common disk-based file systems (I checked ext[23], xfs, jfs)
check to ensure that opens of files > 2 GB fail unless O_LARGEFILE is
specified.  They check via generic_file_open or their own open routine.

ReiserFS doesn't have an f_op->open defined, and as such, it's possible to
open files > 2 GB without O_LARGEFILE.

This patch adds the f_op->open member to conform with the expected
behavior.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is the patch the three previous ones have been leading up to.

It changes the behavior of ReiserFS from loading and caching all the bitmaps
as special, to treating the bitmaps like any other bit of metadata and just
letting the system-wide caches figure out what to hang on to.

Buffer heads are allocated on the fly, so there is no need to retain pointers
to all of them.  The caching of the metadata occurs when the data is read and
updated, and is considered invalid and uncached until then.

I needed to remove the vs-4040 check for performing a duplicate operation on a
particular bit.  The reason is that while the other sites for working with
bitmaps are allowed to schedule, is_reusable() is called from do_balance(),
which will panic if a schedule occurs in certain places.

The benefit of on-demand bitmaps clearly outweighs a sanity check that depends
on a compile-time option that is discouraged.

[akpm@osdl.org: warning fix]
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch moves the bitmap loading code from super.c to bitmap.c

The code is also restructured somewhat.  The only difference between new
format bitmaps and old format bitmaps is where they are.  That's a two liner
before loading the block to use the correct one.  There's no need for an
entirely separate code path.

The load path is generally the same, with the pattern being to throw out a
bunch of requests and then wait for them, then cache the metadata from the
contents.

Again, like the previous patches, the purpose is to set up for later ones.

Update: There was a bug in the previously posted version of this that resulted
in corruption.  The problem was that bitmap 0 on new format file systems must
be treated specially, and wasn't.  A stupid bug with an easy fix.

This is hopefully the last fix for the disaster that is the reiserfs bitmap
patch set.

If a bitmap block was full, first_zero_hint would end up at zero since it
would never be changed from it's zeroed out value.  This just sets it
beyond the end of the bitmap block.  If any bits are freed, it will be
reset to a valid bit.  When info->free_count = 0, then we already know it's
full.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Similar to the SB_JOURNAL cleanup that was accepted a while ago, this patch
uses a temporary variable for buffer head references from the bitmap info
array.

This makes the code much more readable in some areas.

It also uses proper reference counting, doing a get_bh() after using the
pointer from the array and brelse()'ing it later.  This may seem silly, but a
later patch will replace the simple temporary variables with an actual read,
so the reference freeing will be used then.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is a check in is_reusable to determine if a particular block is a bitmap
block.  It verifies this by going through the array of bitmap block buffer
heads and comparing the block number to each one.

Bitmap blocks are at defined locations on the disk in both old and current
formats.  Simply checking against the known good values is enough.

This is a trivial optimization for a non-production codepath, but this is the
first in a series of patches that will ultimately remove the buffer heads from
that array.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The ncp specific compat ioctls are clearly local to one file system, so the
code can better live there.

This version of the patch moves everything into the generic ioctl handler
and uses it for both 32 and 64 bit calls.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPetr Vandrovec <petr@vandrovec.name>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

VFS: Use SEEK_{SET,CUR,END} instead of hardcoded values
Signed-off-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net>
Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* fs/open.c is getting bit crowdy
* preparation to lutimes(2)
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Conversion of booleans to: generic-boolean.patch (2006-08-23)
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Conversion of booleans to: generic-boolean.patch (2006-08-23)
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Conversion of booleans to: generic-boolean.patch (2006-08-23)
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: NAnton Altaparmakov <aia21@cantab.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As people often look for the copyright in files to see who to mail,
update the link to a neutral one.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In the very low memory systems is in the init_bio call
scale parameter set to zero and it leads to creating
zero sized mempool.

This patch prevents pool_entries parameter become zero,
so the created pool have at least 1 entry.

Mempool with 0 entries lead to incorrect behaviour
of mempool_free. (Alloc requests are not waken up
and system stalls in mempool_alloc->ioschedule).
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

- forward declare struct superblock
- use inlines, not macros
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove inclusions of linux/buffer_head.h that are no longer necessary due to the
transfer of a number of things out of there.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove inclusions of linux/mpage.h that are no longer necessary due to the
transfer of generic_writepages().
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Move the msdos device ioctl compat stuff from fs/compat_ioctl.c to the msdos
driver so that the msdos header file doesn't need to be included.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Move the Ext3 device ioctl compat stuff from fs/compat_ioctl.c to the Ext3
driver so that the Ext3 header file doesn't need to be included.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Move the Ext2 device ioctl compat stuff from fs/compat_ioctl.c to the Ext2
driver so that the Ext2 header file doesn't need to be included.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Move the ReiserFS device ioctl compat stuff from fs/compat_ioctl.c to the
ReiserFS driver so that the ReiserFS header file doesn't need to be included.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Move common FS-specific ioctls from linux/ext2_fs.h to linux/fs.h as FS_IOC_*
and FS_IOC32_* and have the users of them use those as a base.

Also move the GETFLAGS/SETFLAGS flags to linux/fs.h as FS_*_FL macros, and then
have the other users use them as a base.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Move the loop device ioctl compat stuff from fs/compat_ioctl.c to the loop
driver so that the loop header file doesn't need to be included.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>