- 09 11月, 2006 5 次提交
-
-
由 Linus Torvalds 提交于
* merom:v2.6/linux: x86-64: write IO APIC irq routing entries in correct order x86-64: clean up io-apic accesses
-
由 Linus Torvalds 提交于
This is the x86-64 version of f9dadfa7 that did the same thing on i386. Since the "mask" bit is in the low word, when we write a new entry, we need to write the high word first, before we potentially unmask it. The exception is when we actually want to mask the interrupt, in which case we want to write the low word first to make sure that the high word doesn't change while the interrupt routing is still active. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This is just commit 130fe05d ported to x86-64, for all the same reasons. It cleans up the IO-APIC accesses in order to then fix the ordering issues. We move the accessor functions (that were only used by io_apic.c) out of a header file, and use proper memory-mapped accesses rather than making up our own "volatile" pointers. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This reverts commit de09bddb. It tried to reserve the MMCONFIG mmio memory ranges, but since the MMCONFIG information is broken and often bogus (which is why we don't dare use it most of the time _anyway_), it does more harm than good. Cc: Jeff Chua <jeff.chua.linux@gmail.com> Cc: Adrian Bunk <bunk@stusta.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_via: fix obvious typo
-
- 08 11月, 2006 15 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [DECNET]: Endianess fixes (try #2) [TG3]: Fix array overrun in tg3_read_partno(). [NET]: Set truesize in pskb_copy [NETPOLL]: Compute checksum properly in netpoll_send_udp(). [PKT_SCHED] sch_htb: Use hlist_del_init(). [TCP]: Don't use highmem in tcp hash size calculation. [NET]: kconfig, correct traffic shaper
-
由 Jeff Garzik 提交于
Spotted by Martin Devera. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Linus Torvalds 提交于
Ok, things are clearly starting to calm down.. Finally.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbglaw/vax-linux由 Linus Torvalds 提交于
* 'fixes_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbglaw/vax-linux: Update for the srm_env driver.
-
由 Steven Whitehouse 提交于
Here are some fixes to endianess problems spotted by Al Viro. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Use proper upper limits for the loops and check for all error conditions. The problem was noticed by Adrian Bunk. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Since pskb_copy tacks on the non-linear bits from the original skb, it needs to count them in the truesize field of the new skb. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Otherwise we can hit paths that (legally) do multiple deletes on the same node and OOPS with the HLIST poison values there instead of NULL. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Heffner 提交于
This patch removes consideration of high memory when determining TCP hash table sizes. Taking into account high memory results in tcp_mem values that are too large. Signed-off-by: NJohn Heffner <jheffner@psc.edu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Slaby 提交于
As Patrick McHardy <kaber@trash.net> suggested, Traffic Shaper is now obsolete and alternative to it is no longer CBQ, since its problems with virtual devices, alter Kconfig text to reflect this -- put a link to the traffic schedulers as a whole. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3927/1: Allow show_mem() to work with holes in memory map. [ARM] 3926/1: make timer led handle HZ != 100 [ARM] 3923/1: S3C24XX: update s3c2410_defconfig with new drivers [ARM] 3922/1: S3C24XX: update s3c2410_defconfig to 2.6.19-rc4 [ARM] 3921/1: S3C24XX: remove bast_defconfig [ARM] 3920/1: S3C24XX: Remove smdk2410_defconfig [ARM] 3919/1: Fixed definition of some PXA270 CIF related registers [ARM] 3918/1: ixp4xx irq-chip rework [ARM] 3912/1: Make PXA270 advertise HWCAP_IWMMXT capability [ARM] 3915/1: S3C2412: Add s3c2410_gpio_getirq() to general gpio.c [ARM] 3917/1: Fix dmabounce symbol exports
-
由 Jan-Benedict Glaw 提交于
This patch contains a fix for a bug introduced more than a year ago (not setting *eof) and updates whitespace a bit. Signed-off-by: NJan-Benedict Glaw <jbglaw@lug-owl.de>
-
由 Ray Lehtiniemi 提交于
show_mem() was not correctly handling holes in the memory map. It was treating the freed sections of the map as though they contained valid struct page entries. This could cause incorrect debugging output or even a kernel panic. This patch keeps the struct meminfo around after system initialization so that show_mem() can use it when scanning memory. show_mem() now walks over each bank of each online node, rather than assuming that each node contains a single contiguous bank. Signed-off-by: NRay Lehtiniemi <rayl@mail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 David Brownell 提交于
The timer LED is unusable at HZ=large, since it's got a hard-wired value of 100 ticks per cycle; when HZ=1024 (for example) it's essentially always-on. This patch just makes that be HZ ticks per cycle. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 11月, 2006 19 次提交
-
-
由 Auke Kok 提交于
e1000: Fix suspend/resume powerup and irq allocation From: Auke Kok <auke-jan.h.kok@intel.com> After 7.0.33/2.6.16, e1000 suspend/resume left the user with an enabled device showing garbled statistics and undetermined irq allocation state, where `ifconfig eth0 down` would display `trying to free already freed irq`. Explicitly free and allocate irq as well as powerup the PHY during resume fixes when needed. Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Johannes Berg 提交于
Through some experimentation with the similarly built bcm43xx I came to the conclusion that if the hw/firmware sets a bit in the interrupt register, an interrupt will only be raised if that bit is included in the interrupt mask. Hence, the interrupt mask is more like an interrupt control mask. This patch changes the comment to reflect that. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix EV64120 and Ocelot builds by providing a plat_timer_setup(). [MIPS] EV64120: Fix PCI interrupt allocation. [MIPS] Make irq number allocator generally available for fixing EV64120. [MIPS] EV64120: Fix timer initialization for HZ != 100. [MIPS] Ocelot 3: Fix MAC address detection after platform_device conversion. [MIPS] Ocelot C: Fix MAC address detection after platform_device conversion. [MIPS] SB1: On bootup only flush cache on local CPU. [MIPS] Ocelot 3: Fix large number of warnings. [MIPS] Ocelot C: Fix mapping of ioport address range. [MIPS] Ocelot C: Fix warning about missmatching format string. [MIPS] Ocelot C: fix eth registration after conversion to platform_device [MIPS] Ocelot C: Fix large number of warnings.
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb由 Linus Torvalds 提交于
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel V4L/DVB (4784): [saa7146_i2c] short_delay mode fixed for fast machines V4L/DVB (4770): Fix mode switch of Compro Videomate T300 V4L/DVB (4787): Budget-ci: Inversion setting fixed for Technotrend 1500 T V4L/DVB (4786): Pvrusb2: use NULL instead of 0 V4L/DVB (4785): Budget-ci: Change DEBIADDR_IR to a safer default V4L/DVB (4752): DVB: Add DVB_FE_CUSTOMISE support for MT2060
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This fixes a warning on bootup warning in smp_call_function. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
o Fix warnings o 768MB worth of I/O ports were insane o 64-bit kernels don't need special handling because ioremap does the magic Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
CC arch/mips/momentum/ocelot_c/setup.o arch/mips/momentum/ocelot_c/setup.c: In function 'momenco_time_init': arch/mips/momentum/ocelot_c/setup.c:223: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' Change data type to match format string; a 32-bit type better suits our needs. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: [DLM] fix oops in kref_put when removing a lockspace [DLM] Fix kref_put oops [GFS2] Fix OOM error handling [GFS2] Fix incorrect fs sync behaviour. [GFS2] don't panic needlessly
-
git://www.atmel.no/~hskinnemoen/linux/kernel/avr32由 Linus Torvalds 提交于
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: AVR32: Add missing return instruction in __raw_writesb AVR32: Wire up sys_epoll_pwait AVR32: Fix thinko in generic_find_next_zero_le_bit() AVR32: Get rid of board_early_init
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] IRQs too early enabled. [S390] revert add_active_range() usage patch.
-
- 06 11月, 2006 1 次提交
-
-
由 Patrick Caulfield 提交于
Now that the lockspace struct is freed when the last sysfs object is released this patch prevents use of that lockspace by sysfs. We attempt to re-get the lockspace from the lockspace list and fail the request if it has been removed. Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-