In Ethernet VF, disable vlan HW acceleration on VF
while it is set to VF vlan protocol 802.1ad mode.
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Check device capability to support VF vlan protocol 802.1ad mode.
Add vport attribute vlan protocol.
Init vport vlan protocol by default to 802.1Q.
Add update QP support for VF vlan protocol 802.1ad.
Add func capability vlan_offload_disable to disable all
vlan HW acceleration on VF while the VF is set to VF vlan protocol
802.1ad mode.
No change in VF vlan protocol 802.1Q (VST) mode.
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Separate QUERY_FUNC_CAP flags0 from QUERY_FUNC_CAP flags, as 'flags' is
already used for another set of flags in FUNC CAP, while phv bit should be
part of a different set of flags.
Remove QUERY_FUNC_CAP port_flags field, as it is not in use.

Fixes: 77fc29c4 ('net/mlx4_core: Preparations for 802.1ad VLAN support')
Fixes: 5cc914f1 ('mlx4_core: Added FW commands and their wrappers for supporting SRIOV')
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit c0c64c15.

There is no vif->ctrl_task member, so this change broke
the build.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Few minor BPF helper improvements

Just a few minor improvements around BPF helpers, first one is a
fix but given this late stage and that it's not really a critical
one, I think net-next is just fine. For details please see the
individual patches.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a small helper that complements 36bbef52 ("bpf: direct packet
write and access for helpers for clsact progs") for invalidating the
current skb->hash after mangling on headers via direct packet write.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Same motivation as in commit 80b48c44 ("bpf: don't use raw processor
id in generic helper"), but this time for XDP typed programs. Thus, allow
for preemption checks when we have DEBUG_PREEMPT enabled, and otherwise
use the raw variant.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to use skb_to_full_sk() helper introduced in commit bd5eb35f
("xfrm: take care of request sockets") as otherwise we miss tcp synack
messages, since ownership is on request socket and therefore it would
miss the sk_fullsock() check. Use skb_to_full_sk() as also done similarly
in the bpf_get_cgroup_classid() helper via 2309236c ("cls_cgroup:
get sk_classid only from full sockets") fix to not let this fall through.

Fixes: 4a482f34 ("cgroup: bpf: Add bpf_skb_in_cgroup_proto")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stephen Hemminger says:

====================
hv_netvsc changes

These are mostly about improving the handling of interaction between
the virtual network device (netvsc) and the SR-IOV VF network device.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Useful for debugging issues with multicast and SR-IOV to keep track
of number of received multicast packets.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since VF reference is now protected by RCU, no longer need the VF usage
counter and can use device flags to see whether to inject or not.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The vf_netdev pointer in the netvsc device context can simply be protected
by RCU because network device destruction is already RCU synchronized.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code to associate netvsc and VF devices can be made less error prone
by using a better matching algorithms.

On registration, use the permanent address which avoids any possible
issues caused by device MAC address being changed. For all other callbacks,
search by the netdevice pointer value to ensure getting the correct
network device.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The callback handler for netlink events can be simplified:
 * Consolidate check for netlink callback events about this driver itself.
 * Ignore non-Ethernet devices.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The netvsc driver holds a pointer to the virtual function network device if
managing SR-IOV association. In order to ensure that the VF network device
does not disappear, it should be using dev_hold/dev_put to get a reference
count.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Packets that are transmitted in normal path should use consume_skb
instead of kfree_skb. This allows for better tracing of packet drops.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vivien Didelot says:

====================
net: dsa: add port fast ageing

Today the DSA drivers are in charge of flushing the MAC addresses
associated to a port when its STP state changes from Learning or
Forwarding, to Disabled or Blocking or Listening.

This makes the drivers more complex and hides this generic switch logic.

This patchset introduces a new optional port_fast_age operation to
dsa_switch_ops, to move this logic to the DSA layer and keep drivers
simple. b53 and mv88e6xxx are updated accordingly.
====================
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that the DSA layer handles port fast ageing on correct STP change,
simplify _mv88e6xxx_port_state and implement mv88e6xxx_port_fast_age.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the fast ageing logic from b53_br_set_stp_state and implement the
new DSA switch port_fast_age operation instead.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Today the DSA drivers are in charge of flushing the MAC addresses
associated to a port when its STP state changes from Learning or
Forwarding, to Disabled or Blocking or Listening.

This makes the drivers more complex and hides the generic switch logic.
Introduce a new optional port_fast_age operation to dsa_switch_ops, to
move this logic to the DSA layer and keep drivers simple.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a void helper to set the STP state of a port, checking first if the
required routine is provided by the driver.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current driver programs static value of MSS in hardware register for TSO
offload engine to segment the TCP payload regardless the MSS value
provided by network stack.

This patch fixes this by programming hardware registers with the
stack provided MSS value.

Since the hardware has the limitation of having only 4 MSS registers,
this patch uses reference count of mss values being used.
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NToan Le <toanle@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change predecrement compare to post decrement compare to avoid an
unsigned integer wrap-around comparison when decrementing idx in
the while loop.

For example, when idx is zero, the current situation will
predecrement idx in the while loop, wrapping idx to the maximum
signed integer and cause out of bounds reads on rxq_info->msix_tbl[idx].
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox 100G SRIOV offloads vlan push/pop

From Or Gerlitz:

This series further enhances the SRIOV TC offloads of mlx5 to handle
the TC vlan push and pop actions. This serves a common use-case in
virtualization systems where the virtual switch add (push) vlan tags
to packets sent from VMs and removes (pop) vlan tags before the packet
is received by the VM. We use the new E-Switch switchdev mode and the
TC vlan action to achieve that also in SW defined SRIOV environments by
offloading TC rules that contain this action along with forwarding
(TC mirred/redirect action) the packet.

In the first patch we add some helpers to access the TC vlan action info
by offloading drivers. The next five patches don't add any new functionality,
they do some refactoring and cleanups in the current code to be used next.

The seventh patch deals with supporting vlans by the mlx5 e-switch in switchdev
mode. The eighth patch does the vlan action offload from TC and the last patch
adds matching for vlans as typically required by TC flows that involve vlan
pop action.

The series was applied on top of commit 524605e5 "cxgb4: Convert to use simple_open()"
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enhance the parsing of offloaded TC rules matches to handle vlans.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Parse TC vlan actions and set the required elements to allow offloading.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Many virtualization systems use a policy under which a vlan tag is
pushed to packets sent by guests, and popped before the packet is
forwarded to the VM.

The current generation of the mlx5 HW doesn't fully support that on
a per flow level. As such, we are addressing the above common use
case with the SRIOV e-Switch abilities to push vlan into packets
sent by VFs and pop vlan from packets forwarded to VFs.

The HW can match on the correct vlan being present in packets
forwarded to VFs (eSwitch steering is done before stripping
the tag), so this part is offloaded as is.

A common practice for vlans is to avoid both push vlan and pop vlan
for inter-host VM/VM (east-west) communication because in this case,
push on egress cancels out with pop on ingress.

For supporting that, we use a global eswitch vlan pop policy, hence
allowing guest A to communicate with both remote VM B and local VM C.
This works since the HW pops the vlan only if it exists (e.g for
C --> A packets but not for B --> A packets).

On the slow path, when a VF vport has an offloaded flow which involves
pushing vlans, wheres another flow is not currently offloaded, the
packets from the 2nd flow seen by the VF representor on the host have
vlan. The VF rep driver removes such vlan before calling into the host
networking stack.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Factor the relevant code into a static inline helper (skb_from_cqe)
doing that.

Move the call to napi_gro_receive to be carried out just
after mlx5e_complete_rx_cqe returns.

Both changes are to be used for the VF representor as well
in the next commit.

This patch doesn't change any functionality.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Put the representors related to the source and dest vports and the
action in struct mlx5_esw_flow_attr which is used while setting the FDB rule.

This patch doesn't change any functionality.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The HW can be programmed to push vlan, pop vlan or both.

A factorization step towards using the push/pop capabilties in the
eswitch offloads mode. This patch doesn't add new functionality.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The structure we use for the eswitch vport representor (mlx5_eswitch_rep)
has some fields which are set from upper layers in the driver when they
register the rep. Use explicit setting on registration time for them and
avoid global memcpy. This patch doesn't add new functionality.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set the vport value in the PF entry to be that of the uplink so
we can use it blindly over the tc / eswitch offload code without
translating it each time we deal with the uplink representor.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Needed e.g for offloading drivers to pick the relevant attributes.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It looks like the following patch can make FQ very precise, even in VM
or stressed hosts. It matters at high pacing rates.

We take into account the difference between the time that was programmed
when last packet was sent, and current time (a drift of tens of usecs is
often observed)

Add an EWMA of the unthrottle latency to help diagnostics.

This latency is the difference between current time and oldest packet in
delayed RB-tree. This accounts for the high resolution timer latency,
but can be different under stress, as fq_check_throttled() can be
opportunistically be called from a dequeue() called after an enqueue()
for a different flow.

Tested:
// Start a 10Gbit flow
$ netperf --google-pacing-rate 1250000000 -H lpaa24 -l 10000 -- -K bbr &

Before patch :
$ sar -n DEV 10 5 | grep eth0 | grep Average
Average:         eth0  17106.04 756876.84   1102.75 1119049.02      0.00      0.00      0.52

After patch :
$ sar -n DEV 10 5 | grep eth0 | grep Average
Average:         eth0  17867.00 800245.90   1151.77 1183172.12      0.00      0.00      0.52

A new iproute2 tc can output the 'unthrottle latency' :

$ tc -s qd sh dev eth0 | grep latency
  0 gc, 0 highprio, 32490767 throttled, 2382 ns latency
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a NULL check before calling asynchronous MCDI completion functions
during device removal.

Fixes: 7014d7f6 ("sfc: allow asynchronous MCDI without completion function")
Signed-off-by: NBert Kenward <bkenward@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marcelo Ricardo Leitner says:

====================
sctp: fix the handling of SACK Gap Ack blocks

sctp_acked() is using 32bit arithmetics on 16bits vars, via TSN_lte()
macros, which is weird and confusing.

Once the offset to ctsn is calculated, all wrapping is already handled
and thus to verify the Gap Ack blocks we can just use pure
less/big-or-equal than checks.

Also, rename gap variable to tsn_offset, so it's more meaningful, as
it doesn't point to any gap at all.

Even so, I don't think this discrepancy resulted in any practical bug.

This patch is a preparation for the next one, which will introduce
typecheck() for TSN_lte() macros and would cause a compile error here.
Suggested-by: NDavid Laight <David.Laight@ACULAB.COM>
Reported-by: NDavid Laight <David.Laight@ACULAB.COM>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make it similar to time_before() macros:
- easier to understand
- make use of typecheck() to avoid working on unexpected variable types
  (made the issue on previous patch visible)
- for _[lg]te versions, slighly faster, as the compiler used to generate
  a sequence of cmp/je/cmp/js instructions and now it's sub/test/jle
  (for _lte):

Before, for sctp_outq_sack:
	if (primary->cacc.changeover_active) {
    1f01:	80 b9 84 02 00 00 00 	cmpb   $0x0,0x284(%rcx)
    1f08:	74 6e                	je     1f78 <sctp_outq_sack+0xe8>
		u8 clear_cycling = 0;

		if (TSN_lte(primary->cacc.next_tsn_at_change, sack_ctsn)) {
    1f0a:	8b 81 80 02 00 00    	mov    0x280(%rcx),%eax
	return ((s) - (t)) & TSN_SIGN_BIT;
}

static inline int TSN_lte(__u32 s, __u32 t)
{
	return ((s) == (t)) || (((s) - (t)) & TSN_SIGN_BIT);
    1f10:	8b 7d bc             	mov    -0x44(%rbp),%edi
    1f13:	39 c7                	cmp    %eax,%edi
    1f15:	74 25                	je     1f3c <sctp_outq_sack+0xac>
    1f17:	39 f8                	cmp    %edi,%eax
    1f19:	78 21                	js     1f3c <sctp_outq_sack+0xac>
			primary->cacc.changeover_active = 0;

After:
	if (primary->cacc.changeover_active) {
    1ee7:	80 b9 84 02 00 00 00 	cmpb   $0x0,0x284(%rcx)
    1eee:	74 73                	je     1f63 <sctp_outq_sack+0xf3>
		u8 clear_cycling = 0;

		if (TSN_lte(primary->cacc.next_tsn_at_change, sack_ctsn)) {
    1ef0:	8b 81 80 02 00 00    	mov    0x280(%rcx),%eax
    1ef6:	2b 45 b4             	sub    -0x4c(%rbp),%eax
    1ef9:	85 c0                	test   %eax,%eax
    1efb:	7e 26                	jle    1f23 <sctp_outq_sack+0xb3>
			primary->cacc.changeover_active = 0;

*_lt() generated pretty much the same code.
Tested with gcc (GCC) 6.1.1 20160621.

This patch also removes SSN_lte as it is not used and cleanups some
comments.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sctp_acked() is using 32bit arithmetics on 16bits vars, via TSN_lte()
macros, which is weird and confusing.

Once the offset to ctsn is calculated, all wrapping is already handled
and thus to verify the Gap Ack blocks we can just use pure
less/big-or-equal than checks.

Also, rename gap variable to tsn_offset, so it's more meaningful, as
it doesn't point to any gap at all.

Even so, I don't think this discrepancy resulted in any practical bug.

This patch is a preparation for the next one, which will introduce
typecheck() for TSN_lte() macros and would cause a compile error here.
Suggested-by: NDavid Laight <David.Laight@ACULAB.COM>
Reported-by: NDavid Laight <David.Laight@ACULAB.COM>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On error path in route4_change(), 'f' could be NULL,
so we should check NULL before calling tcf_exts_destroy().

Fixes: b9a24bb7 ("net_sched: properly handle failure case of tcf_exts_init()")
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>