If an NVMe controller reports RTD3 Entry Latency larger than
shutdown_timeout, up to a maximum of 60 seconds, use that value to set
the shutdown timer. Otherwise fall back to the module parameter which
defaults to 5 seconds.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
[hch: removed do_div, made transition time local scope]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The value of iod->first_dma ends up as prp2 in NVMe commands. In case
there is not enough data to cross a page boundary, iod->first_dma is
never initialized and contains random data.

Comply with the NVMe specification and fill in 0 in that case.
Signed-off-by: NJan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This patch slightly improves performance (mainly for small block sizes).
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This changes the earlier patch "nvmet: don't report 0-bytes
in serial number" to use the memcpy_and_pad() helper introduced
in a previous patch.
Signed-off-by: NMartin Wilck <mwilck@suse.com>
Reviewed-by: NSagi Grimberg <sagi@grimbeg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The existing nvmet_fc sg list handling has 2 faults:
a) the request between LLDD and transport has too large of an sg
   list (256 elements), which is normally 256k (64 elements).
b) sglist handling doesn't optimize on the fact that each element
   is a page.

This patch removes the static sg list in the request and uses the
dynamic list already present in the nvmet_fc transport. It also
simplies the handling of the sg list on multiple sequences to
take advantage of the per-page divisions.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

If the LLDD resets or detaches from an fc port, the LLDD will
deregister all remoteports seen by the fc port and deregister the
localport associated with the fc port. The teardown of the localport
structure will be held off due to reference counting until all the
remoteports are removed (and they are held off until all
controllers/associations to terminated). Currently, if the fc port
is reinit/reattached and registered again as a localport it is
treated as an independent entity from the prior localport and all
prior remoteports and controllers cannot be revived. They are
created as new and separate entities.

This patch changes the localport registration to look at the known
localports that are waiting to be torndown. If they are the same port
based on wwn's, the local port is transitioned out of the teardown
state.  This allows the remote ports and controller connections to
be reestablished and resumed as long as the localport can also be
reregistered within the timeout windows.

The patch adds a new routine nvme_fc_attach_to_unreg_lport() with
the functionality and moves the lport get/put routines to avoid
forward references.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Use ctrl->device and lose the func name.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This helps users to quickly spot the reason of why connection fails
if the hostid is not compliant with the uuid format.
Signed-off-by: NGuan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

To make the nvme_rdma_configure_admin_queue generic in preparation of
moving it to common code.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

No need to queue an extra work to indirect controller removal, just call the
ctrl remove routine.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This should pair with nvme_rdma_stop_queue.  While this is not a complete
inverse, it still pairs up pretty well because in fabrics we don't have a
disconnect capsule (yet) but we simply teardown the transport association.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Give it a name symmetric to nvme_rdma_free_queue. Also pass in the ctrl
sqsize+1 and not the opts queue_size.  And suppress a superflous
failure message.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

If we move the queues from LIVE state, we might as well stop them (drain
for rdma).  Do it after we stop the request queues to prevent a stray
request sneaking in .queue_rq after we stop the queue.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Make a symmetrical handling with admin queue.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

No need to open-code it.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We're not supposed to do that.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Mimic the pci driver as a controller disable might be more lightweight
than a shutdown.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We always pair tagset allocation with rdma device reference and it shares
some code, centralize it with an argument if its an admin or IO tagset.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Will be used when we centralize control flows.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We will call it from other places so avoid having to forward declare it.
Also move it next to nvme_rdma_destroy_admin_queue.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

NVME_RDMA_MAX_SEGMENT_SIZE is not used anywhere, zap it.
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

ALL_OPTS isn't used anywhere, remove it.
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

nvmf target shall return NVME_SC_CONNECT_INVALID_HOST instead of
the gereal code INVALID_PARAM when the given host nqn is not allowed
to connect. Refer to the 2.2.1 section of the NVMe over Fabrics Spec.
Signed-off-by: NGuan Junxiong <guanjunxiong@huawei.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>

NVME's Timestamp feature allows controllers to be aware of the epoch
time in milliseconds. This patch adds the set features hook for various
transports through the identify path, so that resets and resumes can
update the controller as necessary.
Signed-off-by: NJon Derrick <jonathan.derrick@intel.com>
[hch: rebased on top of nvme-4.13 error handling changes,
      changed nvme_configure_timestamp to return the status]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Define the constant "0xffffffff" (used as nsid for all namespaces)
as NVME_NSID_ALL.
Signed-off-by: NArnav Dawn <a.dawn@samsung.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

This patch adds support for handling Fw activation without reset
On completion of FW-activation-starting AER, all queues are
paused till CSTS.PP is cleared or timed out (exceeds max time for
fw activtion MTFA). If device fails to clear CSTS.PP within MTFA,
driver issues reset controller.
Signed-off-by: NArnav Dawn <a.dawn@samsung.com>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

irq_create_affinity_masks() can return NULL on non-SMP systems, when there
are not enough "free" vectors available to spread, or if memory allocation
for the CPU masks fails.  Only the allocation failure is of interest, and
even then the system will work just fine except for non-optimally spread
vectors.  Thus remove the warnings.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>

The SKD_ID_INCR flag in skd_request_context.id duplicates information
that is already available otherwise, e.g. through the block layer
request state and through skd_request_context.state. Hence remove
the code that manipulates this flag and also the flag itself.
Since skd_isr_completion_posted() only uses the lower bits of
skd_request_context.id as hardware tag, this patch does not change
the behavior of the skd driver. I'm referring to the following code:

    tag = req_id & SKD_ID_SLOT_AND_TABLE_MASK;
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Although it is easy to see that skdev->disk != NULL if skdev->queue
!= NULL, add a test for skdev->disk to avoid that smatch reports the
following warning:

drivers/block/skd_main.c:3080 skd_free_disk()
         error: we previously assumed 'disk' could be null (see line 3074)
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

It is not worth to keep the debug statements in skd_end_request().
Without debug statements that function only consists of two
statements. Hence inline skd_end_request().
Suggested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The latter name follows more closely the function names used in
other blk-mq drivers.
Suggested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Dan reported this:

The patch 2984c868: "nullb: factor disk parameters" from Aug 14,
2017, leads to the following Smatch complaint:

drivers/block/null_blk.c:1759 null_init_tag_set()
	 error: we previously assumed 'nullb' could be null (see line
1750)

  1755		set->cmd_size	= sizeof(struct nullb_cmd);
  1756		set->flags = BLK_MQ_F_SHOULD_MERGE;
  1757		set->driver_data = NULL;
  1758
  1759		if (nullb->dev->blocking)
                    ^^^^^^^^^^^^^^^^^^^^
And an unchecked dereference.

nullb could be NULL here.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Update to a working one, the fusionio address hasn't been valid
in 4 years.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Commit 0b0f9dc5 ("Revert "virtio_pci: use shared interrupts for
virtqueues"") removed the adjustment of the pre_vectors for the virtio
MSI-X vector allocation which was added in commit fb5e31d9 ("virtio:
allow drivers to request IRQ affinity when creating VQs"). This will
lead to an incorrect assignment of MSI-X vectors, and potential
deadlocks when offlining cpus.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Fixes: 0b0f9dc5 ("Revert "virtio_pci: use shared interrupts for virtqueues")
Reported-by: NYASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The message printed on disk resize is incorrect.  The following is
printed when resizing to 2 GiB:

  $ truncate -s 1G test.img
  $ qemu -device virtio-blk-pci,logical_block_size=4096,...
  (qemu) block_resize drive1 2G

  virtio_blk virtio0: new size: 4194304 4096-byte logical blocks (17.2 GB/16.0 GiB)

The virtio_blk capacity config field is in 512-byte sector units
regardless of logical_block_size as per the VIRTIO specification.
Therefore the message should read:

  virtio_blk virtio0: new size: 524288 4096-byte logical blocks (2.15 GB/2.0 GiB)

Note that this only affects the printed message.  Thankfully the actual
block device has the correct size because the block layer expects
capacity in sectors.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Version 4 of the ONFI spec mandates that tADL be at least 400 nanoseconds,
but, depending on the master clock rate, 400 ns may not fit in the tADL
field of the SMC reg. We need to relax the check and accept the -ERANGE
return code.

Note that previous versions of the ONFI spec had a lower tADL_min (100 or
200 ns). It's not clear why this timing constraint got increased but it
seems most NANDs are fine with values lower than 400ns, so we should be
safe.

Fixes: f9ce2edd ("mtd: nand: atmel: Add ->setup_data_interface() hooks")
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: NQuentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

The debugfs entries must be removed before an error is returned in the
probe function. Otherwise another try to load the module fails and when
the debugfs files are accessed without the module loaded, the kernel
still tries to call a function in that module.

Fixes: 5346c27c ("mtd: nandsim: Introduce debugfs infrastructure")
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: NRichard Weinberger <richard@nod.at>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>